FAA · Airworthiness Directive
Airworthiness Directives; Bombardier, Inc., Airplanes
Abstract
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by reports of missing or damaged inboard flap seal plate assemblies. This proposed AD would require repetitive inspections for cracks of the attaching angles of the inboard flap seal plates and replacement. This proposed AD would also require the eventual replacement of both inboard flap seal plates, which would terminate the repetitive inspections. The FAA is proposing this AD to address the unsafe condition on these products.
Applicability
Aircraft makes and models this AD applies to, sorted by US-registered fleet size.
Federal Register text
Verbatim from the Federal Register publication — required actions, compliance times, parts/serial numbers, and methods of compliance. The Federal Register is the legally binding document; this rendering is for readability. Cite: 89 FR 65264.
[Federal Register Volume 89, Number 154 (Friday, August 9, 2024)] [Proposed Rules] [Pages 65264-65267] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2024-17455]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2024-2015; Project Identifier MCAI-2023-00769-T] RIN 2120-AA64
Airworthiness Directives; Bombardier, Inc., Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by reports of missing or damaged inboard flap seal plate assemblies. This proposed AD would require repetitive inspections for cracks of the attaching angles of the inboard flap seal plates and replacement. This proposed AD would also require the eventual replacement of both inboard flap seal plates, which would terminate the repetitive inspections. The FAA is proposing this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this proposed AD by September 23, 2024.
ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-2015; or in person at Docket Operations between 9 a.m. and
[[Page 65265]]
5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For Bombardier material identified in this proposed AD, contact Bombardier Business Aircraft Customer Response Center, 400 C[ocirc]te-Vertu Road West, Dorval, Qu[eacute]bec H4S 1Y9, Canada; telephone 514-855-2999; email bombardier.com">[email protected]; website bombardier.com. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.
FOR FURTHER INFORMATION CONTACT: Yaser Osman, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516- 228-7300; email [email protected].