Skip to content

Atlas / ADs / 2024-22258

FAA · Airworthiness Directive

Airworthiness Directives; Airbus SAS Airplanes

AD 2024-22258 Published 2024-09-30 1 model 44 US-registered tails affected Federal Register ↗

Abstract

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -302, -343, and -941 airplanes. This AD was prompted by a determination that a certain aft bulkhead cover panel may have been made with a non-conforming material. This AD requires replacing the aft bulkhead cover panel and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Applicability

Aircraft makes and models this AD applies to, sorted by US-registered fleet size.

Federal Register text

Verbatim from the Federal Register publication — required actions, compliance times, parts/serial numbers, and methods of compliance. The Federal Register is the legally binding document; this rendering is for readability. Cite: 89 FR 79418.

[Federal Register Volume 89, Number 189 (Monday, September 30, 2024)] [Rules and Regulations] [Pages 79418-79420] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2024-22258]

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2024-1288; Project Identifier MCAI-2024-00063-T; Amendment 39-22818; AD 2024-16-12] RIN 2120-AA64

Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -302, -343, and -941 airplanes. This AD was prompted by a determination that a certain aft bulkhead cover panel may have been made with a non-conforming material. This AD requires replacing the aft bulkhead cover panel and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

DATES: This AD is effective November 4, 2024. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of November 4, 2024.

View on Federal Register ↗