FAA · Airworthiness Directive
Airworthiness Directives; Piaggio Aviation S.p.A. Airplanes
Abstract
The FAA proposes to supersede Airworthiness Directive (AD) 2023-25-03, which applies to certain Piaggio Aviation S.p.A. (Piaggio) Model P-180 airplanes. AD 2023-25-03 requires a one-time detailed inspection of the horizontal stabilizer (HS) central box for corrosion; an assessment of the corrosion level; and depending on the determination, repetitive detailed inspections of the HS central box for corrosion and the internal composite structure for surface cracks, distortion, and damage; and repair or replacement of the HS assembly. Repair or replacement of the HS assembly is terminating action for the repetitive inspections. Since the FAA issued AD 2023-25-03, it was determined that AD 2023-25-03 imposed an unintended restriction that is not in the mandatory continuing airworthiness information (MCAI). This proposed AD would retain certain actions of AD-2023-25-03 and would remove the unintended restriction. The FAA is proposing this AD to address the unsafe condition on these products.
Applicability
Aircraft makes and models this AD applies to, sorted by US-registered fleet size.
Federal Register text
Verbatim from the Federal Register publication — required actions, compliance times, parts/serial numbers, and methods of compliance. The Federal Register is the legally binding document; this rendering is for readability. Cite: 90 FR 8507.
[Federal Register Volume 90, Number 19 (Thursday, January 30, 2025)] [Proposed Rules] [Pages 8507-8510] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-01968]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2025-0013; Project Identifier MCAI-2024-00375-A] RIN 2120-AA64
Airworthiness Directives; Piaggio Aviation S.p.A. Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 2023-25-03, which applies to certain Piaggio Aviation S.p.A. (Piaggio) Model P-180 airplanes. AD 2023-25-03 requires a one-time detailed inspection of the horizontal stabilizer (HS) central box for corrosion; an assessment of the corrosion level; and depending on the determination, repetitive detailed inspections of the HS central box for corrosion and the internal composite structure for surface cracks, distortion, and damage; and repair or replacement of the HS assembly. Repair or replacement of the HS assembly is terminating action for the repetitive inspections. Since the FAA issued AD 2023-25-03, it was determined that AD 2023-25-03 imposed an unintended restriction that is not in the mandatory continuing airworthiness information (MCAI). This proposed AD would retain certain actions of AD-2023-25-03 and would remove the unintended restriction. The FAA is proposing this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this NPRM by March 17, 2025.
ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: (202) 493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0013; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the MCAI, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For Piaggio material identified in this proposed AD, contact Piaggio Aviation S.p.A., P180 Customer Support, via Pionieri e Aviatori d'Italia, snc--16154 Genoa, Italy; phone: +39 331 679 74 93; email: [email protected]. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (817) 222-5110.
FOR FURTHER INFORMATION CONTACT: William McCully, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: (404) 474-5548; email: [email protected].