Skip to content

AD 2025-02619

Published 2025-02-18 · 2 models · 4 US-registered tails affected · Federal Register

Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes Federal Register ↗

Abstract

The FAA proposes to adopt a new airworthiness directive (AD) for certain ATR--GIE Avions de Transport R[eacute]gional Model ATR42- 500 and ATR72-212A airplanes. This proposed AD was prompted by a report of potential use of improper material during the production of vertical tail plane (VTP) fittings. This proposed AD would require, for certain airplanes, an inspection for the material of affected fuselage-to-VTP fittings, an inspection report, and corrective actions, and, for certain other airplanes, part replacement, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

Applicability · by US fleet size

Federal Register text

Verbatim; the Federal Register publication is the legally binding document. Cite: 90 FR 9698. View on Federal Register ↗

[Federal Register Volume 90, Number 31 (Tuesday, February 18, 2025)] [Proposed Rules] [Pages 9698-9701] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-02619]

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2025-0203; Project Identifier MCAI-2024-00360-T] RIN 2120-AA64

Airworthiness Directives; ATR--GIE Avions de Transport R[eacute]gional Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for certain ATR--GIE Avions de Transport R[eacute]gional Model ATR42- 500 and ATR72-212A airplanes. This proposed AD was prompted by a report of potential use of improper material during the production of vertical tail plane (VTP) fittings. This proposed AD would require, for certain airplanes, an inspection for the material of affected fuselage-to-VTP fittings, an inspection report, and corrective actions, and, for certain other airplanes, part replacement, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

DATES: The FAA must receive comments on this proposed AD by April 4, 2025.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0203; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For EASA material identified in this proposed AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email [email protected]; website easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu. It is also available at regulations.gov under Docket No. FAA-2025-0203. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

FOR FURTHER INFORMATION CONTACT: Shahram Daneshmandi, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 206-231-3220; email shahram.[email protected].