AD 2025-07275
Published 2025-04-28 · 3 models · 46 US-registered tails affected · Federal Register
Airworthiness Directives; Bell Textron Canada Limited Helicopters Federal Register ↗
Abstract
The FAA is superseding Airworthiness Directive (AD) 2021-24- 09, which applied to certain Bell Textron Canada Limited Model 430 helicopters. AD 2021-24-09 required a visual inspection of the main rotor (M/R) pitch link clevis (clevis), rod end, and a certain part- numbered universal bearing, performing a purge grease, and performing a magnetic particle inspection of each M/R clevis, and depending on the inspection results, removing or replacing certain parts and performing additional actions. AD 2021-24-09 also required recurring inspections of each M/R clevis and each universal bearing. Since the FAA issued AD 2021-24-09, the manufacturer has reduced the life limits of the affected parts and introduced new M/R pitch link assemblies by re- identifying the M/R pitch link assemblies that were required to be inspected by AD 2021-24-09. This AD requires similar actions as AD 2021-24-09 but reduces the life limits and requires replacing the M/R pitch link assemblies with re-identified part numbered assemblies. These actions are specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Applicability · by US fleet size
Federal Register text
Verbatim; the Federal Register publication is the legally binding document. Cite: 90 FR 17547. View on Federal Register ↗
[Federal Register Volume 90, Number 80 (Monday, April 28, 2025)] [Rules and Regulations] [Pages 17547-17550] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-07275]
======================================================================== Rules and Regulations Federal Register ________________________________________________________________________ This section of the FEDERAL REGISTER contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510. The Code of Federal Regulations is sold by the Superintendent of Documents. ========================================================================
Federal Register / Vol. 90, No. 80 / Monday, April 28, 2025 / Rules and Regulations
[[Page 17547]]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2025-0743; Project Identifier MCAI-2024-00711-R; Amendment 39-23024; AD 2025-09-03] RIN 2120-AA64
Airworthiness Directives; Bell Textron Canada Limited Helicopters
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2021-24- 09, which applied to certain Bell Textron Canada Limited Model 430 helicopters. AD 2021-24-09 required a visual inspection of the main rotor (M/R) pitch link clevis (clevis), rod end, and a certain part- numbered universal bearing, performing a purge grease, and performing a magnetic particle inspection of each M/R clevis, and depending on the inspection results, removing or replacing certain parts and performing additional actions. AD 2021-24-09 also required recurring inspections of each M/R clevis and each universal bearing. Since the FAA issued AD 2021-24-09, the manufacturer has reduced the life limits of the affected parts and introduced new M/R pitch link assemblies by re- identifying the M/R pitch link assemblies that were required to be inspected by AD 2021-24-09. This AD requires similar actions as AD 2021-24-09 but reduces the life limits and requires replacing the M/R pitch link assemblies with re-identified part numbered assemblies. These actions are specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
DATES: This AD is effective May 13, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of May 13, 2025. The FAA must receive comments on this AD by June 12, 2025.
ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: (202) 493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0743; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For Transport Canada material identified in this AD, contact Transport Canada, Transport Canada National Aircraft Certification, 159 Cleopatra Drive, Nepean, Ontario, K1A 0N5, CANADA; phone: (888) 663-3639; email: [email protected]. You may find the Transport Canada material on the Transport Canada website at tc.canada.ca/en/aviation. You may view this material at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Parkway, Room 6N- 321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (817) 222-5110. It is also available at regulations.gov under Docket No. FAA-2025-0743.
FOR FURTHER INFORMATION CONTACT: Alexis Whitaker, Aviation Safety Engineer, FAA, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY; phone: (516) 228-7309; email: [email protected].