Skip to content

AD 2025-07488

Published 2025-05-01 · 2 models · 27 US-registered tails affected · Federal Register

Airworthiness Directives; Airbus SAS Airplanes Federal Register ↗

Abstract

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes, Model A319-111, -112, - 113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, - 131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by cracks being found during full-scale fatigue testing of the keel beam bottom panel between the edge profile and stringer run-out at a certain frame and stringer. This AD requires repetitive special detailed inspections (SDI) of the affected area, and corrective actions, if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Applicability · by US fleet size

Federal Register text

Verbatim; the Federal Register publication is the legally binding document. Cite: 90 FR 18627. View on Federal Register ↗

[Federal Register Volume 90, Number 83 (Thursday, May 1, 2025)] [Rules and Regulations] [Pages 18627-18629] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-07488]

======================================================================== Rules and Regulations Federal Register ________________________________________________________________________ This section of the FEDERAL REGISTER contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510. The Code of Federal Regulations is sold by the Superintendent of Documents. ========================================================================

Federal Register / Vol. 90, No. 83 / Thursday, May 1, 2025 / Rules and Regulations

[[Page 18627]]

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2024-2548; Project Identifier MCAI-2024-00401-T; Amendment 39-23026; AD 2025-09-05] RIN 2120-AA64

Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes, Model A319-111, -112, - 113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, - 131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by cracks being found during full-scale fatigue testing of the keel beam bottom panel between the edge profile and stringer run-out at a certain frame and stringer. This AD requires repetitive special detailed inspections (SDI) of the affected area, and corrective actions, if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

DATES: This AD is effective June 5, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of June 5, 2025.