AD 2025-12875
Published 2025-07-10 · 1 model · 2 US-registered tails affected · Federal Register
Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders Federal Register ↗
Abstract
The FAA is adopting a new airworthiness directive (AD) for all DG Aviation GmbH (type certificate previously held by DG Flugzeugbau GmbH) Model DG-1000T gliders. This AD was prompted by reports of propeller separation. This AD requires revising the glider flight manual and installing "Motor INOP" placards to prohibit operation with the powerplant. The FAA is issuing this AD to address the unsafe condition on these products.
Applicability · by US fleet size
- DG-FLUGZEUGBAU GMBH DG-1000T 2 tails
Federal Register text
Verbatim; the Federal Register publication is the legally binding document. Cite: 90 FR 30575. View on Federal Register ↗
[Federal Register Volume 90, Number 130 (Thursday, July 10, 2025)] [Rules and Regulations] [Pages 30575-30577] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-12875]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2025-1119; Project Identifier MCAI-2025-00914-G; Amendment 39-23074; AD 2025-13-08] RIN 2120-AA64
Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all DG Aviation GmbH (type certificate previously held by DG Flugzeugbau GmbH) Model DG-1000T gliders. This AD was prompted by reports of propeller separation. This AD requires revising the glider flight manual and installing ``Motor INOP'' placards to prohibit operation with the powerplant. The FAA is issuing this AD to address the unsafe condition on these products.
DATES: This AD is effective July 25, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of July 25, 2025. The FAA must receive comments on this AD by August 25, 2025.
ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: (202) 493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-1119; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For DG Aviation GmbH material identified in this AD, contact DG Aviation GmbH, Rita Rodrigues, Otto Lilienthal Weg 2/Am Flugplatz, Bruchsal, Germany; phone: +49 (0) 7251 36660-32; email: [email protected]; website: https://www.dg-aviation.de/en/dg-flugzeugbau/contact. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (817) 222-5110. It is also available at regulations.gov under Docket No. FAA-2025-1119.
FOR FURTHER INFORMATION CONTACT: Dan McCully, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: (404) 474-5548; email: [email protected].