AD 2025-20010
Published 2025-11-17 · 4 models · 40 US-registered tails affected · Federal Register
Airworthiness Directives; The Boeing Company Airplanes Federal Register ↗
Abstract
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-8F series airplanes. This proposed AD was prompted by reports of cracking in stringers and splice fittings located at stringer splices at multiple body stations. This proposed AD would require an inspection of each free flange of the stringers at the stringer splice for radius fillers at certain fastener locations, an inspection for cracking of the stringers and stringer splice fittings at certain stringer splice locations, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Applicability · by US fleet size
Federal Register text
Verbatim; the Federal Register publication is the legally binding document. Cite: 90 FR 51227. View on Federal Register ↗
[Federal Register Volume 90, Number 219 (Monday, November 17, 2025)] [Proposed Rules] [Pages 51227-51230] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-20010]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2025-4000; Project Identifier AD-2025-00440-T] RIN 2120-AA64
Airworthiness Directives; The Boeing Company Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-8F series airplanes. This proposed AD was prompted by reports of cracking in stringers and splice fittings located at stringer splices at multiple body stations. This proposed AD would require an inspection of each free flange of the stringers at the stringer splice for radius fillers at certain fastener locations, an inspection for cracking of the stringers and stringer splice fittings at certain stringer splice locations, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this proposed AD by January 2, 2026.
ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-4000; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For Boeing material identified in this proposed AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; website myboeingfleet.com. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2025-4000.
FOR FURTHER INFORMATION CONTACT: Taylor Stanley, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 407- 852-7677; email: [email protected].