AD 2026-01094
Published 2026-01-21 · 4 models · 50 US-registered tails affected · Federal Register
Airworthiness Directives; CFM International, S.A. Engines Federal Register ↗
Abstract
The FAA is superseding Airworthiness Directive (AD) 2018-19-16 for all CFM International, S.A. (CFM) Model LEAP-1A23, -1A24, -1A24E1, -1A26, -1A26E1, -1A26CJ, -1A29, -1A29CJ, -1A30, -1A32, -1A33, -1A33B2, and -1A35A engines with certain full authority digital engine control (FADEC) and prognostic health monitoring (PHM) software installed. AD 2018-19-16 required removing certain FADEC and PHM software and installing versions eligible for installation. Since the FAA issued AD 2018-19-16, the manufacturer has developed a new pressure subsystem (PSS) with a heater element to evaporate potential moisture on the PSS manifold/transducer interface and prevent freezing at low temperature. This AD requires replacing certain FADEC and PHM software with new versions that are eligible for installation, replacing certain harnesses with newly designed harnesses, and replacing the PSS with a newly designed heated PSS. The FAA is issuing this AD to address the unsafe condition on these products.
Applicability · by US fleet size
Federal Register text
Verbatim; the Federal Register publication is the legally binding document. Cite: 91 FR 2465. View on Federal Register ↗
[Federal Register Volume 91, Number 13 (Wednesday, January 21, 2026)] [Rules and Regulations] [Pages 2465-2467] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2026-01094]
[[Page 2465]]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2025-1725; Project Identifier AD-2025-00583-E; Amendment 39-23244; AD 2026-02-08] RIN 2120-AA64
Airworthiness Directives; CFM International, S.A. Engines
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2018-19-16 for all CFM International, S.A. (CFM) Model LEAP-1A23, -1A24, -1A24E1, -1A26, -1A26E1, -1A26CJ, -1A29, -1A29CJ, -1A30, -1A32, -1A33, -1A33B2, and -1A35A engines with certain full authority digital engine control (FADEC) and prognostic health monitoring (PHM) software installed. AD 2018-19-16 required removing certain FADEC and PHM software and installing versions eligible for installation. Since the FAA issued AD 2018-19-16, the manufacturer has developed a new pressure subsystem (PSS) with a heater element to evaporate potential moisture on the PSS manifold/transducer interface and prevent freezing at low temperature. This AD requires replacing certain FADEC and PHM software with new versions that are eligible for installation, replacing certain harnesses with newly designed harnesses, and replacing the PSS with a newly designed heated PSS. The FAA is issuing this AD to address the unsafe condition on these products.
DATES: This AD is effective February 25, 2026. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-1725; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Mehdi Lamnyi, Aviation Safety Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; phone: (781) 238-7743; email: [email protected].