AD 2026-02912
Published 2026-02-13 · 3 models · 13 US-registered tails affected · Federal Register
Airworthiness Directives; The Boeing Company Airplanes Federal Register ↗
Abstract
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by a report of cracks found in the fuselage skin underneath the aft drain mast. This proposed AD would require repetitive inspections of the fuselage skin and structure common to the aft drain mast for any crack or corrosion and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Applicability · by US fleet size
- BOEING 737-400 TCDS A16WE 10 tails
- BOEING 100 TCDS ATC 133 2 tails
- FLIGHT MC 1 tails
Federal Register text
Verbatim; the Federal Register publication is the legally binding document. Cite: 91 FR 6798. View on Federal Register ↗
[Federal Register Volume 91, Number 30 (Friday, February 13, 2026)] [Proposed Rules] [Pages 6798-6801] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2026-02912]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2026-1324; Project Identifier AD-2025-00986-T] RIN 2120-AA64
Airworthiness Directives; The Boeing Company Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by a report of cracks found in the fuselage skin underneath the aft drain mast. This proposed AD would require repetitive inspections of the fuselage skin and structure common to the aft drain mast for any crack or corrosion and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this proposed AD by March 30, 2026.
ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2026-1324; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For Boeing material identified in this proposed AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone
[[Page 6799]]
562-797-1717; website myboeingfleet.com. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2026-1324.
FOR FURTHER INFORMATION CONTACT: Wayne Ha, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 562-627-5238; email: [email protected].