AD 2026-12048

Abstract

The FAA is superseding Airworthiness Directive (AD) 2023-01-04 for all Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350D, AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters. AD 2023-01-04 required, for helicopters with certain part- numbered tail rotor head (TRH) spider pitch change units installed, inspecting the pitch change spider nut (nut) for correct installation; marking a 2 to 5 mm wide black paint index mark and repetitively inspecting the alignment of the marking; and performing additional inspections and corrective actions if necessary. Since the FAA issued AD 2023-01-04, new or more restrictive airworthiness limitations were issued, which terminated the requirement for the repetitive inspections of the black paint index marking. This AD requires the same actions as AD 2023-01-04, except for the repetitive black paint index marking inspections and prohibits installing certain parts unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products.

Applicability · by US fleet size

• AIRBUS HELICOPTERS AS350B3 TCDS H9EU 346 tails

Compliance instructions

Required actions, compliance times, parts/serial numbers and methods of compliance are in the Federal Register publication — not paraphrased here. Read AD on Federal Register ↗