Streamlined Launch and Reentry Licensing Requirements

[Federal Register Volume 84, Number 72 (Monday, April 15, 2019)] [Proposed Rules] [Pages 15296-15444] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2019-05972]

[[Page 15295]]

Vol. 84

Monday,

No. 72

April 15, 2019

Part II

Department of Transportation

-----------------------------------------------------------------------

Federal Aviation Administration

-----------------------------------------------------------------------

14 CFR Parts 401, 404, 413, et al.

Streamlined Launch and Reentry Licensing Requirements; Proposed Rule

Federal Register / Vol. 84 , No. 72 / Monday, April 15, 2019 / Proposed Rules

[[Page 15296]]

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Parts 401, 404, 413, 414, 415, 417, 420, 431, 433, 435, 437, 440, and 450

[Docket No.: FAA-2019-0229; Notice No. 19-01] RIN 2120-AL17

Streamlined Launch and Reentry Licensing Requirements

AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT).

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: This rulemaking would streamline and increase flexibility in the FAA's commercial space launch and reentry regulations, and remove obsolete requirements. This action would consolidate and revise multiple regulatory parts and apply a single set of licensing and safety regulations across several types of operations and vehicles. The proposed rule would describe the requirements to obtain a vehicle operator license, the safety requirements, and the terms and conditions of a vehicle operator license.

DATES: Send comments on or before June 14, 2019.

ADDRESSES: Send comments identified by docket number FAA-2019-0229 using any of the following methods: Federal eRulemaking Portal: Go to http://www.regulations.gov and follow the online instructions for sending your comments electronically. Mail: Send comments to Docket Operations, M-30; U.S. Department of Transportation (DOT), 1200 New Jersey Avenue SE, Room W12-140, West Building Ground Floor, Washington, DC 20590-0001. Hand Delivery or Courier: Take comments to Docket Operations in Room W12-140 of the West Building Ground Floor at 1200 New Jersey Avenue SE, Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. Fax: Fax comments to Docket Operations at 202-493-2251. Privacy: In accordance with 5 U.S.C. 553(c), DOT solicits comments from the public to better inform its rulemaking process. DOT posts these comments, without edit, including any personal information the commenter provides, to www.regulations.gov, as described in the system of records notice (DOT/ALL-14 FDMS), which can be reviewed at www.dot.gov/privacy. Docket: Background documents or comments received may be read at http://www.regulations.gov at any time. Follow the online instructions for accessing the docket or go to the Docket Operations in Room W12-140 of the West Building Ground Floor at 1200 New Jersey Avenue SE, Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

FOR FURTHER INFORMATION CONTACT: For questions concerning this action, contact Randy Repcheck, Office of Commercial Space Transportation, Federal Aviation Administration, 800 Independence Avenue SW, Washington, DC 205914; telephone (202) 267-8760; email [email protected].

SUPPLEMENTARY INFORMATION:

Authority for This Rulemaking

The Commercial Space Launch Act of 1984, as amended and codified at 51 U.S.C. 50901-50923 (the Act), authorizes the Department of Transportation, and the FAA through delegation, to oversee, license, and regulate commercial launch and reentry activities, and the operation of launch and reentry sites as carried out by U.S. citizens or within the United States. Section 50905 directs the FAA to exercise this responsibility consistent with public health and safety, safety of property, and the national security and foreign policy interests of the United States. In addition, section 50903 requires the FAA encourage, facilitate, and promote commercial space launches and reentries by the private sector. If adopted as proposed, this rulemaking would consolidate and revise multiple regulatory parts to apply a single set of licensing and safety regulations across several types of operations and vehicles. It would also streamline the commercial space regulations by, among other things, replacing many prescriptive regulations with performance-based rules, giving industry greater flexibility to develop means of compliance that maximize their business objectives while maintaining public safety. Because this rulemaking would amend the FAA's launch and reentry requirements, it falls under the authority delegated by the Act.

List of Abbreviations and Acronyms Frequently Used in This Document

AC--Advisory Circular CEC--Conditional expected casualty EC--Expected casualty ELOS determination--Equivalent-level-of-safety determination ELV--Expendable launch vehicle FSA--Flight safety analysis FSS--Flight safety system PC--Probability of casualty PI--Probability of impact RLV--Reusable launch vehicle

Table of Contents

I. Overview of Proposed Rule II. Background A. History B. Licensing Process C. National Space Council D. Streamlined Launch and Reentry Licensing Requirements Aviation Rulemaking Committee III. Discussion of the Proposal A. The FAA's Approach To Updating and Streamlining Launch and Reentry Regulations B. Single Vehicle Operator License C. Performance-Based Requirements and Means of Compliance D. Launch From a Federal Launch Range E. Safety Framework Flight Safety A. Public Safety Criteria 1. Neighboring Operations Personnel 2. Property Protection (Critical Assets) 3. Consequence Protection Criteria for Flight Abort and Flight Safety System B. System Safety Program 1. Safety Organization 2. Procedures 3. Configuration Management and Control 4. Post-Flight Data Review C. Preliminary Safety Assessment for Flight D. Hazard Control Strategy E. Flight Abort 1. Flight Safety Limits and Uncontrolled Areas 2. Flight Abort Rules 3. Flight Safety System F. Flight Hazard Analysis G. Computing Systems and Software Overview H. Hybrid Launch Vehicles I. Flight Safety Analysis Overview J. Safety-Critical Systems 1. Safety-Critical Systems Design, Test, and Documentation 2. Flight Safety System K. Other Prescribed Hazard Controls 1. Agreements 2. Safety-Critical Personnel Qualifications 3. Work Shift and Rest Requirements 4. Radio Frequency Management 5. Readiness: Reviews and Rehearsals 6. Communications 7. Preflight Procedures 8. Surveillance and Publication of Hazard Areas 9. Lightning Hazard Mitigation 10. Flight Safety Rules 11. Tracking 12. Launch and Reentry Collision Avoidance Analysis Requirements 13. Safety at End of Launch 14. Mishaps: Definition, Plan, Reporting, Response, Investigation, Test-Induced Damage L. Pre- and Post-Flight Reporting 1. Preflight Reporting 2. Post-Flight Reporting Ground Safety A. Definition and Scope of Launch B. Ground Safety Requirements Process Improvements

[[Page 15297]]

A. Safety Element Approval B. Incremental Review of a License Application C. Time Frames D. Continuing Accuracy of License Application and Modification of License Other Changes A. Pre-Application Consultation B. Policy Review and Approval C. Payload Review and Determination D. Safety Review and Approval E. Environmental Review F. Additional License Terms and Conditions, Transfer of a Vehicle Operator License, Rights Not Conferred by a Vehicle Operator License G. Unique Safety Policies, Requirements, and Practices H. Compliance Monitoring I. Registration of Space Objects J. Public Safety Responsibility, Compliance With License, Records, Financial Responsibility, and Human Spaceflight Requirements K. Applicability L. Equivalent Level of Safety Additional Technical Justification and Rationale A. Flight Safety Analyses 1. Scope and Applicability 2. Flight Safety Analysis Methods 3. Trajectory Analysis for Normal Flight 4. Trajectory Analysis for Malfunction Flight 5. Debris Analysis 6. Flight Safety Limits Analysis 7. Gate Analysis 8. Data Loss Flight Time and Planned Safe Flight State Analyses 9. Time Delay Analysis 10. Probability of Failure 11. Flight Hazard Areas 12. Debris Risk Analysis 13. Far-Field Overpressure Blast Effects 14. Toxic Hazards for Flight 15. Wind Weighting for the Flight of an Unguided Suborbital Launch Vehicle B. Software C. Changes to Parts 401, 413, 414, 420, 437, 440 1. Part 401--Definitions 2. Part 413--Application Procedures 3. Part 414--Safety Element Approvals 4. Part 420--License To Operate a Launch Site 6. Part 437--Experimental Permits 7. Part 440--Financial Responsibility IV. Regulatory Notices and Analyses A. Regulatory Evaluation B. Regulatory Flexibility Determination C. International Trade Impact Assessment D. Unfunded Mandates Assessment E. Paperwork Reduction Act F. International Compatibility G. Environmental Analysis V. Executive Order Determinations A. Executive Order 13132, Federalism B. Executive Order 13211, Regulations That Significantly Affect Energy Supply, Distribution, or Use C. Executive Order 13609, International Cooperation D. Executive Order 13771, Reducing Regulation and Controlling Regulatory Costs VI. Additional Information A. Comments Invited B. Availability of Rulemaking Documents The Proposed Amendment

I. Overview of Proposed Rule

The FAA commercial space transportation regulations protect public health and safety and the safety of property from the hazards of launch and reentry. In addition, the regulations address national security and foreign policy interests of the United States, financial responsibility, environmental impacts, informed consent for crew and space flight participants, and, to a limited extent, authorization of payloads not otherwise regulated or owned by the U.S. Government. The FAA is proposing this deregulatory action consistent with President Donald J. Trump's Space Policy Directive--2 (SPD-2) ``Streamlining Regulations on Commercial Use of Space.'' \1\ The directive charged the Department of Transportation with revising regulations to require a single license for all types of commercial space flight operations and replace prescriptive requirements with performance-based criteria. Streamlining these regulations would lower administrative burden and regulatory compliance costs and bolster the U.S. space commercial sector and industrial base. ---------------------------------------------------------------------------

\1\ Space Policy Directive--2, Streamlining Regulations on Commercial Use of Space; May 24, 2018 (https://www.whitehouse.gov/presidential-actions/space-policy-directive-2-streamlining-regulations-commercial-use-space/). ---------------------------------------------------------------------------

Additionally, this proposed rule incorporates industry input and recommendations provided primarily by the Streamlined Launch and Reentry Licensing Requirements Aviation Rulemaking Committee (ARC). The subject proposed rule would implement the applicable section of SPD-2 and address industry. The recommendation report is provided in the docket for this rulemaking. Current regulations setting forth application procedures and requirements for commercial space transportation licensing were based largely on the distinction between expendable and reusable launch vehicles. Specifically, title 14 of the Code of Federal Regulations (14 CFR) parts 415 and 417 address the launch of expendable launch vehicles (ELVs) and are based on the Federal launch range standards developed in the 1990s. Part 431 addresses the launch and reentry of reusable launch vehicles (RLVs), and part 435 addresses the reentry of reentry vehicles other than RLVs. Parts 431 and 435 are primarily process-based, relying on a license applicant to derive safety requirements through a ``system safety'' process. That being said, the FAA has used the more detailed part 417 requirements to inform parts 431 and 435. While these separate regulatory parts and requirements satisfied the need of the commercial space transportation industry at the time they were issued,\2\ the industry has changed and continues to evolve. ---------------------------------------------------------------------------

\2\ The current 14 CFR parts 415, 417, 431, and 435 regulatory text can be found at https://www.ecfr.gov/ under their respective links. The eCFR contains Federal Register citations for each time a regulation is modified by rulemaking. ---------------------------------------------------------------------------

The FAA proposes to consolidate, update, and streamline all launch and reentry regulations into a single performance-based part to better fit today's fast-evolving commercial space transportation industry. Proposed part 450 would include regulations applicable to all launch and reentry vehicles, whether they have reusable components or not. The FAA looked to balance the regulatory certainty but rigidity of current ELV regulations with the flexibility but vagueness of current RLV regulations. As a result, these proposed regulations are flexible and scalable to accommodate innovative safety approaches while also protecting public health and safety, safety of property, and the national security and foreign policy interests of the United States. The FAA proposes to continue reviewing licenses in five component parts: Policy review, payload review, safety review, maximum probable loss determination, and environmental review. However, after consulting with the FAA, applicants would have the option of submitting portions of applications for incremental review and approval by the FAA. In terms of the applications themselves, the FAA has streamlined and better defined application requirements. In terms of safety requirements, the FAA would maintain a high level of safety. Neighboring operations requirements would result in a minimal risk increase compared to current regulations, offset by operational benefits. The FAA would anchor the proposed requirements on public safety criteria. The FAA would continue to use the current collective and individual risk criteria. However, this proposal would implement risk criteria for neighboring operations personnel, critical asset protection, and conditional risk to protect from an unlikely but catastrophic event.\3\ In particular, the

[[Page 15298]]

conditional risk would be used to determine the need for a flight safety system \4\ and the reliability of that system. To meet these public safety criteria, most operators would have the option of using traditional hazard controls or to derive alternate controls through a system safety approach. These rules would also revise quantitative flight safety analyses to better define their applicability and to reduce the level of prescriptiveness. In terms of ground safety, the FAA has scoped its oversight to better fit the safety risks and to increase operator flexibility. ---------------------------------------------------------------------------

\3\ As will be discussed later, ``neighboring operations personnel'' would be defined as those members of the public located within a launch or reentry site, or an adjacent launch or reentry site, who are not associated with a specific hazardous licensed or permitted operation currently being conducted but are required to perform safety, security, or critical tasks at the site and are notified of the operation. ``Critical asset'' means an asset that is essential to the national interests of the United States. Critical assets include property, facilities, or infrastructure necessary to maintain national defense, or assured access to space for national priority missions. For ``conditional risk,'' the FAA would require that operators quantify the consequence of a catastrophic event, by calculating the conditional risk as conditional expected casualties for any one-second period of flight. Unlike collective risk that determines the expected casualties factoring in the probability that a dangerous event will occur, conditional risk determines the expected casualties assuming the dangerous event will occur. \4\ The FAA proposes to revise the definition in Sec. 401.5 of ``flight safety system'' to mean a system used to implement flight abort. A human can be a part of a flight safety system. The proposed definition is discussed later in this preamble. ---------------------------------------------------------------------------

To satisfy the proposed performance-based regulations, operators would be able to use a means of compliance that has already been accepted by the FAA or propose an alternate approach. To retain the maximum flexibility to adjust to dynamic industry changes, the FAA would continue to offer operators the choice to request waivers of regulations and equivalent level of safety determinations. The proposed rule is a deregulatory action under Executive Order 13771.\5\ This deregulatory action would consolidate and revise multiple commercial space regulatory parts to apply a single set of licensing and safety regulations across several types of operations and vehicles. It would also replace many prescriptive regulations with performance-based regulations, giving industry greater flexibility to develop a means of compliance that maximizes their business objectives. This proposed rule would result in net cost savings for industry and enable future innovation in U.S. commercial space transportation. ---------------------------------------------------------------------------

\5\ Executive Order 13771, Reducing Regulation and Controlling Regulatory Costs, January 30, 2017, (https://www.whitehouse.gov/presidential-actions/presidential-executive-order-reducing-regulation-controlling-regulatory-costs/). ---------------------------------------------------------------------------

At the time of writing, the FAA estimates this proposed rule would affect 12 operators that have an active license or permit to conduct launch or reentry operations. In addition, the FAA estimates this proposed rule would affect approximately 276 launches over the next 5 years (2019 through 2023). The FAA anticipates this proposed rule would reduce the costs of current and future launch operations by removing prescriptive requirements that are burdensome to meet or require a waiver. The FAA expects these changes would lead to more efficient launch operations and have a positive effect on expanding the number of future launch and reentry operations. Based on the preliminary analysis, the FAA estimates industry stands to gain about $19 million in discounted present value net savings over 5 years or about $5 million in annualized net savings (using a discount rate of 7 percent). In addition, the FAA will save about $1 million in the same time period. The FAA expects industry will gain additional unquantified savings and benefits as the proposed rule is implemented, since it would provide flexibility and scalability through performance-based requirements that would reduce the future cost of innovation and improve the efficiency and productivity of U.S. commercial space transportation.\6\ ---------------------------------------------------------------------------

\6\ 51 U.S.C. 50904 grants the FAA authority to oversee, license, and regulate commercial launch and reentry activities, and the operation of launch and reentry sites as carried out by U.S. citizens or within the United States. ---------------------------------------------------------------------------

Throughout this document, the FAA uses scientific notation to indicate probabilities. For example, 1 x 10-\2\ means one in a hundred and 1 x 10-\6\ means one in a million.

II. Background

A. History

As noted earlier, the Act authorizes the Secretary of Transportation to oversee, license, and regulate commercial launch and reentry activities and the operation of launch and reentry sites as carried out by U.S. citizens or within the United States. The Act directs the Secretary to exercise this responsibility consistent with public health and safety, safety of property, and the national security and foreign policy interests of the United States, and to encourage, facilitate, and promote commercial space launches by the private sector. The FAA carries out the Secretary's responsibilities under the Act. In the past 30 years, the Department of Transportation (DOT) regulations addressing launch and reentry have gone through a number of iterations intended to be responsive to an emerging industry while at the same time ensuring public safety. A review of this history is provided to put this rulemaking in perspective. 1. First Licensing Regulations in 1988 DOT's first licensing regulations for commercial launch activities became effective over 30 years ago, on April 4, 1988. The regulations replaced previous guidance and constituted the procedural framework for reviewing and authorizing all proposals to conduct non-Federal launch activities, including the launching of launch vehicles, operation of launch sites, and payload activities that were not licensed by other federal agencies. They included general administrative procedures and a revised compilation of DOT's information requirements. No licensed launches had yet taken place when DOT initially issued these regulations. Accordingly, DOT established a flexible regime intended to be responsive to an emerging industry while at the same time ensuring public safety. This approach worked well because all commercial launches at the time took place from Federal launch ranges where safety practices were well established and had proven effective in protecting public safety. In 1991, when the industry reached about ten launches a year, DOT took further steps designed to simplify the licensing process for launch operators with established safety records by instituting a launch operator license, which allowed one license to cover a series of launches where the same safety resources support identical or similar missions. 2. Licensing Changes in 1999 On June 21, 1999,\7\ the FAA amended its commercial space transportation licensing regulations to clarify its license application process generally, and for launches from Federal launch ranges specifically. The FAA intended the regulations to provide an applicant or an operator with greater specificity and clarity regarding the scope of a license and to codify and amend licensing requirements and criteria. Notable changes were dividing launch into preflight and flight activities; defining launch to begin with the arrival of the launch vehicle or its major components at a U.S. launch site; separating what had been a safety and mission review into a safety, policy, and

[[Page 15299]]

payload review; and the addition of a specific requirement to ``passivate'' any vehicle stage left on orbit to avoid the potential of creating orbital debris through a subsequent explosion. ---------------------------------------------------------------------------

\7\ Commercial Space Transportation Licensing Regulations, Final Rule. 64 FR 19586 (April 21, 1999). ---------------------------------------------------------------------------

3. Reusable Launch Vehicle Regulations in 2000 In the mid-1990s, prospective RLV operators identified the absence of adequate regulatory oversight over RLV operations, particularly their reentry, as an impediment to technology development. The need for a stable and predictable regulatory environment in which RLVs could operate was considered critical to the capability of the emerging RLV industry to obtain the capital investment necessary for research and development and ultimately vehicle operations. The Commercial Space Act of 1998, Public Law 105-303, extended DOT's licensing authority to the reentry of reentry vehicles and the operation of reentry sites by non- Federal entities. In September 2000, the FAA amended the commercial space transportation licensing regulations by establishing requirements for the launch of an RLV, the reentry of a reentry vehicle, and the operation of launch and reentry sites.\8\ ---------------------------------------------------------------------------

\8\ Commercial Space Transportation Reusable Launch Vehicle and Reentry Licensing Regulations, Final Rule. 65 FR 56617 (September 19, 2000). ---------------------------------------------------------------------------

At the time, the FAA believed that the differences between ELVs and RLVs justified a different regulatory approach. There was a long history of successful ELV launches from Federal launch ranges using detailed prescriptive regulations, encouraging the FAA to follow suit. Also, ELVs and RLVs used different means of terminating flight. ELV launches typically relied on flight safety systems (FSS) that terminated flight to ensure flight safety by preventing a vehicle from traveling beyond approved limits. Unlike an ELV, the FAA contemplated that an RLV might rely upon other means of ending vehicle flight, such as returning to the launch site or using an alternative landing site, in case the vehicle might not be able to safely conclude a mission as planned. Importantly, other than NASA's Space Shuttle, there was little experience with RLVs. For these reasons, the FAA decided to enact flexible process-based regulations for RLVs and other reentry vehicles. These regulations reside in 14 CFR parts 431 and 435. 4. Further Regulatory Changes in 2006 The last major change to FAA launch regulations occurred in 2006.\9\ The FAA believed that it would be advantageous for its ELV regulations to be consistent with Federal launch range requirements and worked with the United States Air Force (Air Force) and the National Aeronautics and Space Administration (NASA) to codify safety practices for ELVs. Those regulations reside in 14 CFR parts 415 and 417. The 2006 rule also codified safety responsibilities and requirements that applied to any licensed launch, regardless of whether the launch occurs from a Federal launch range or a non-Federal launch site. ---------------------------------------------------------------------------

\9\ Licensing and Safety Requirements for Launch, Final Rule. 71 FR 50508 (August 25, 2006). ---------------------------------------------------------------------------

In developing the technical requirements, the FAA built on the safety success of Federal launch ranges and sought to achieve their same high level of safety by using Federal launch range practices as a basis for FAA regulations consistent with its authority. The regulations specified detailed processes, procedures, analyses, and general safety system design requirements. For safety-critical hardware and software, where necessary, the rule provided design and detailed test requirements. The FAA attempted to provide flexibility by allowing a launch operator the opportunity to demonstrate an alternative means of achieving an equivalent level of safety. 5. Evolution of Launch Vehicles and the Need for Updated and Streamlined Regulations Since 2006, the differences between ELVs and RLVs have blurred. Vehicles that utilize traditional flight safety systems now are partially reusable. For example, the Falcon 9 first stage, launched by Space Exploration Technologies Corporation (SpaceX), routinely returns to the launch site or lands on a barge, and other operators are developing launch vehicles with similar return and reuse capabilities. Although the reuse of safety critical systems or components can have public safety implications, labeling a launch vehicle as expendable or reusable has not impacted the primary approach necessary to protect public safety, certainly not to the extent suggested in the differences between part 431 and parts 415 and 417. Moreover, the regulations for ELV launches in parts 415 and 417 have proven to be too prescriptive and one-size-fits-all, and the significant detail has caused the regulations to become obsolete in many instances. For example, part 417 requires all launch operators to have at least 11 plans that define how launch processing and flight of a launch vehicle will be conducted, each with detailed requirements. This can lead an operator to produce documents that are not necessary to conduct safe launch operations. In contrast, the regulations for RLV launches have proven to be too general, lacking regulatory clarity. For example, part 431 does not contain specificity regarding the qualification of flight safety systems, acceptable methods for flight safety analyses, and ground safety requirements. This lack of clarity can cause delays in the application process to allow for discussions between the FAA and the applicant. Operators frequently rely upon the requirements in part 417 to demonstrate compliance. Since 2015, the launch rate has only increased, from 9 licensed launches a year to 33 licensed launches in 2018. Beginning in 2016, the FAA developed a comprehensive strategy to consolidate and streamline the regulatory parts associated with commercial space launch and reentry operations and licensing of space vehicles. Actions by the National Space Council confirmed and accelerated FAA rulemaking plans regarding launch and reentry licenses.

B. Licensing Process

When it issues a license, the Act requires the FAA to do so consistent with public health and safety, safety of property, and national security and foreign policy interests of the United States.\10\ The FAA currently conducts its licensing application review in five component parts: Policy Review, Payload Review, Safety Review, Maximum Probable Loss Determination, and Environmental Review. The license application review is depicted in figure 1. A policy review, in consultation with other government agencies, determines whether the launch or reentry would jeopardize U.S. national security or foreign policy interests, or international obligations of the United States. A payload review, also in consultation with other government agencies, determines whether the launch or reentry of a payload would jeopardize public health and safety, safety of property, U.S. national security or the foreign policy interests, or international obligations of the United States. A safety review examines whether the launch or reentry would jeopardize public health and safety and safety of property, and typically is the most extensive part of FAA's review. The Act also requires the FAA to determine financial responsibility of the licensee for third party liability and losses to U.S. Government property based on the maximum probable loss. Lastly, the National Environmental Policy Act requires the FAA to consider and

[[Page 15300]]

document the potential environmental effects associated with issuing a launch or reentry license. ---------------------------------------------------------------------------

\10\ 51 U.S.C. 50905(a). [GRAPHIC] [TIFF OMITTED] TP15AP19.000

This proposal would not alter this 5-pronged approach to licensing. Although the FAA usually evaluates components concurrently, as noted later in this preamble, the FAA may make separate determinations after considering the interrelationship between the components. For instance, this proposal would allow an applicant to apply for a Safety Review component in an incremental manner. This preamble will discuss the proposed incremental review process in further detail later.

C. National Space Council

The National Space Council was established by President George H.W. Bush on April 20, 1989 by Executive Order 12675 to have oversight of U.S. national space policy and its implementation. Chaired by Vice President Dan Quayle until its disbanding in 1993, the first National Space Council consisted of the Secretaries of State, Treasury, Defense, Commerce, Transportation, Energy, the Director of the Office of Management and Budget, the Chief of Staff to the President, the Assistant to the President for National Security Affairs, the Assistant to the President for Science and Technology, the Director of Central Intelligence, and the NASA Administrator. On June 30, 2017, President Donald J. Trump signed Executive Order 13803, which reestablished the National Space Council to provide a coordinated process for developing and monitoring the implementation of national space policy and strategy. The newly-reinstituted body met for the first time on October 5, 2017. As Chair of the Council, the Vice President directed the Secretaries of Transportation and Commerce, and the Director of the Office of Management and Budget, to conduct a review of the U.S. regulatory framework for commercial space activities and report back within 45 days with a plan to remove barriers to commercial space enterprises. The assigned reports and recommendations for regulatory streamlining were presented at the second convening of the National Space Council on February 21, 2018. The Council approved four recommendations, including DOT's recommendation that the launch and reentry regulations should be reformed into a consolidated, performance-based licensing regime. On May 24, 2018, the Council memorialized its recommendations in SPD-2. SPD-2 instructed the Secretary of Transportation to publish for notice and comment proposed rules rescinding or revising the launch and reentry licensing regulations, no later than February 1, 2019. SPD-2 charged the Department with revising the regulations such that they would require a single license for all types of commercial space flight operations and replace prescriptive requirements with performance-based criteria. SPD-2 further commended the Secretary to coordinate with the members of the National Space Council, especially the Secretary of Defense and the NASA Administrator, to minimize requirements associated with commercial space flight launch and reentry operations from Federal launch ranges as appropriate.

D. Streamlined Launch and Reentry Licensing Requirements Aviation Rulemaking Committee

On March 8, 2018, the FAA chartered the Streamlined Launch and Reentry Licensing Requirements Aviation Rulemaking Committee (ARC) to provide a forum to discuss regulations to set forth procedures and requirements for commercial space transportation launch and reentry licensing. The FAA tasked the ARC to develop recommendations for a performance-based regulatory approach in which the

[[Page 15301]]

regulations set forth the safety objectives to be achieved while providing the applicant with the flexibility to produce tailored and innovative means of compliance. The ARC's membership represented a broad range of stakeholder perspectives, including members from aviation and space communities. The ARC was supported by the FAA and other federal agency subject matter experts. The following table identifies ARC participants from the private sector:

------------------------------------------------------------------------

------------------------------------------------------------------------- Aerospace industries association. Airlines for America. Alaska Aerospace Corporation. Astra Space. Blue Origin. Boeing. Coalition for Deep Space Exploration. Commercial Spaceflight Federation. Exos Aerospace Systems & Technologies, Inc. Generation Orbit. Lockheed Martin Corporation. MLA Space, LLC. Mojave air and spaceport. Orbital ATK. RocketLab. Sierra Nevada Corp. Spaceport America. SpaceX. Space Florida. Stratolaunch. United Launch Alliance. Vector Launch, Inc. Virgin Galactic/Virgin Orbit. World View Enterprises. ------------------------------------------------------------------------

On April 30, 2018, the ARC produced its final recommendation report, which has been placed in the docket to this rulemaking.\11\ The ARC recommended that the proposed regulations should-- ---------------------------------------------------------------------------

\11\ Streamlined Launch and Reentry Licensing Requirements ARC, Recommendations Final Report (April 30, 2008). The ARC Report is available for reference in the docket for this proposed rule. ---------------------------------------------------------------------------

1. Be performance-based, primarily based upon the ability of the applicant to comply with expected casualty limits. 2. Be flexible. i. Adopt a single license structure to accommodate a variety of vehicle types and operations and launch or reentry sites. ii. Allow for coordinated determination of applicable regulations prior to the application submission. iii. Develop regulations that can be met without waivers. iv. Use guidance documents to facilitate frequent updates. 3. Reform the pre-application consultation process and requirements. i. Use ``complete enough'' as the real criterion for entering application evaluation and remove the requirement for pre-application consultation. ii. Use a level-of-rigor approach to scope an applicant-requested pre-application consultation process as the basis for a ``complete enough'' determination, considering both an applicant's prior experience and whether the subject vehicle is known or unknown. 4. Contain defined review timelines. i. Support significantly-reduced timelines and more efficient review. ii. Increase predictability for industry. iii. Create reduced review timelines for both new and continuing accuracy submissions. 5. Contain continuing accuracy requirements. Continuing accuracy submissions should be based upon impact to public safety as measured by the Expected Casualty (EC). 6. Limit FAA jurisdiction. i. Limit FAA jurisdiction to activities so publicly hazardous as to warrant FAA-oversight. ii. Identify well-defined inspection criteria. 7. Eliminate duplicative jurisdiction on Federal launch ranges. The FAA will address these recommendations in more detail throughout the remainder of this document. During the course of the ARC, volunteer industry members formed a Task Group to provide draft regulatory text reflecting proposed revisions to the commercial space transportation regulations. The volunteer industry members of the Task Group were Blue Origin, Sierra Nevada Corporation, Space Florida, and SpaceX. The majority of the ARC opposed the formation of this Task Group and disagreed with including the proposed regulatory text into the ARC's recommendation report. The FAA will not specifically address the proposed regulatory text in this document because it did not receive broad consensus within the ARC.

III. Discussion of the Proposal

A. The FAA's Approach To Updating and Streamlining Launch and Reentry Regulations

The FAA's approach to meeting SPD-2's mandate is to consolidate, update, and streamline all launch and reentry regulations into a single performance-based part. Pursuant to SPD-2, and in the interest of updating the FAA's regulations to reflect the current commercial space industry, the FAA proposes to consolidate requirements for the launch and reentry of ELVs, RLVs, and reentry vehicles other than an RLV.\12\ The FAA would also update a number of safety provisions, including areas such as software safety and flight safety analyses (FSA), to reflect recent advancements. Finally, the FAA proposes to streamline its regulations by designing them to be flexible and scalable, to reduce timelines, to remove or minimize duplicative jurisdiction, and to limit FAA jurisdiction over ground safety to operations that are hazardous to the public. This streamlining was the focus of the ARC. ---------------------------------------------------------------------------

\12\ These requirements currently appear in parts 415, 417, 431, and 435. ---------------------------------------------------------------------------

The FAA proposal would follow the ARC recommendations to enable greater regulatory flexibility. First, the proposed rule would be primarily performance-based, codifying performance standards and relying on FAA guidance or other standards to provide acceptable means of compliance. This would allow the regulations to better adapt to advancements in the industry. Second, the FAA proposes to change the structure of its launch and reentry license to be more flexible in the number and types of launches and reentries one license can accommodate. Third, as the ARC suggested, system safety principles would be prominent. All applicants would need to comply with core system safety management principles and conduct a preliminary safety assessment. Some applicants may also be required to use a flight hazard analysis to derive hazard controls particular to their operation. Lastly, for any particular requirement, the FAA would maintain the ability for an applicant or operator to propose an alternative approach for compliance, and then clearly demonstrate that the alternative approach would provide an equivalent level of safety to the requirement. The ARC recommended that the level of rigor of an applicant's safety demonstration vary based on vehicle history, company history, and the relative risk of the launch or reentry. It also recommended that the FAA not always require a flight safety system. The FAA recognizes that different operations require different levels of rigor, and is proposing a more scalable regulatory regime. Given performance- based regulations are inherently scalable, the FAA proposal is consistent with the ARC recommendation, even though it does not explicitly account for vehicle or operator history as a means of scaling requirements. In addition to performance-based requirements, this proposal would implement a specific level-of-rigor approach to ensure safety requirements are proportionate to the public safety risk in the need for a flight safety system and its required

[[Page 15302]]

reliability, in flight safety analysis,\13\ and in software safety. These are all discussed in greater detail later in this preamble. ---------------------------------------------------------------------------

\13\ For flight safety analyses, various levels of rigor would be outlined in ACs. ---------------------------------------------------------------------------

Because the rulemaking process is time-consuming and labor intensive, the FAA seeks to minimize the need for regulatory updates to proposed part 450 through the proposed performance-based regulations which would allow for a variety of FAA-approved means of compliance. Approving new means of compliance creates flexibility for operators without reducing safety. Additionally, approving new means of compliance is easier to accomplish than updating regulatory standards through the rulemaking process. Thus, the proposed regulatory scheme would be more adaptable to the fast-evolving commercial space industry. The ARC recommended that the FAA should design a modular approach to application submittal and evaluation and significantly reduce FAA review timelines. This proposal would allow an applicant to apply for a license in an incremental manner,\14\ to be developed on a case-by-case basis during pre-application consultation. Most timelines in the proposal would have a default value, followed by an option for the FAA to agree to a different time frame, taking into account the complexity of the request and whether it would allow sufficient time for the FAA to conduct its review and make its requisite findings. Lastly, the FAA proposes to make it easier for a launch or reentry operator to obtain a safety element approval, which would reduce the time and effort of an experienced operator in a future license application. Although these provisions should reduce the time for experienced operators, the FAA does not propose to reduce by regulation the statutory review period of 180 days to make a decision on a license application. ---------------------------------------------------------------------------

\14\ In this rulemaking, the term ``incremental'' would be synonymous with the ARC's proposed term of ``modular.'' ---------------------------------------------------------------------------

It might be useful to provide some perspective concerning the time the FAA actually takes to make license determinations. The average of the last ten new license determinations through calendar year 2018 was 141 days; the median was 167 days. The FAA strives to expedite determinations when possible to accommodate launch schedules. In three of these ten, the FAA made determinations in 54, 73, and 77 days, all without tolling. Three determinations were tolled for 73, 77, and 171 days. The lengthy tolling was the result of a software issue concerning a flight safety system that the applicant needed to resolve. To our knowledge, a launch has never been delayed as a result of the time it took the FAA to make a license determinations. The ARC recommended that the FAA propose rules that eliminate duplicative U.S. Government requirements when an operator conducts operations at a Federal launch range. The FAA's proposal would allow for varying levels of Federal launch range involvement, including a single FAA authorization. It would also minimize duplicative work by a launch or reentry operator. This issue is discussed in more detail later in this preamble. Also, the ARC recommended that the FAA limit its jurisdiction over ground operations to activities so publicly hazardous as to warrant the FAA's oversight. This proposal would scope ground activities overseen by FAA to each operation. It would also permit neighboring operations personnel to be present during launch activities in certain circumstances. The ARC also recommended that the FAA require the pre-application process only for new operators or new vehicle programs, and that pre- application occur at the operator's discretion for all other operations.\15\ The FAA proposes to retain the requirement for pre- application consultation because of the various flexibilities proposed in this rule. These include incremental review, timelines, and the performance-based nature of many of the regulatory requirements. Pre- application consultation would assist operators with the licensing process and accommodate all operators, including those that choose to avail themselves of the flexibilities provided in this proposal. The FAA acknowledges, however, that pre-application consultation can be minimal for operators experienced with FAA requirements. In such cases, consultation may consist of a telephone conversation. ---------------------------------------------------------------------------

\15\ ARC Report at p. 23. ---------------------------------------------------------------------------

B. Single Vehicle Operator License

As part of its streamlining effort, the FAA proposes in Sec. 450.3 (Scope of Vehicle Operator License) to establish one license, a vehicle operator license, for commercial launch and reentry activity. A vehicle operator license would authorize a licensee to conduct one or more launches or reentries using the same vehicle or family of vehicles and would specify whether it covers launch, reentry, or launch and reentry. The FAA would eliminate the current limitation in Sec. 415.3 specifying a launch license covers only one launch site, and would eliminate the designations of launch-specific license and launch operator license, mission-specific license and operator license, and reentry-specific license and reentry-operator license. The proposal would also allow the FAA to scope the duration of the license to the operation. Although the FAA has not defined a ``family of vehicles,'' launch operators often do so themselves. Usually, the vehicles share a common core, i.e., the booster and upper stage. Sometimes multiple boosters are attached together to form a larger booster. Historically, solid rocket motors have been attached to core boosters to enhance capability. There has never been an issue concerning what operators and the FAA consider to be members of the same family. It is merely a convenient way to structure licenses. SPD-2 directed the DOT to revise the current launch and reentry licensing regulations with special consideration to requiring a single license for all types of commercial launch and reentry operations. Similarly, the ARC recommended that the FAA adopt a single license structure to accommodate a variety of vehicle types, operations, and launch and reentry sites. In accordance with these recommendations, the FAA proposes a single vehicle operator license that could be scoped to the operation. In order to accommodate the increasingly similar characteristics of some ELVs and RLVs, as well as future concepts, these proposed regulations would no longer distinguish between ELVs and RLVs. Rather, this proposal would consolidate the licensing requirements for all commercial launch and reentry activities under one part, and applicants would apply for the same type of license. In addition to accommodating different vehicles and types of operations, this proposal would allow launches or reentries under a single vehicle operator license from or to multiple sites. Under the current regulations, in order for an operator to benefit from using multiple sites for launches authorized by a part 415 license, the operator must apply for a new license.\16\ This process is unnecessarily burdensome. This

[[Page 15303]]

proposed change would facilitate the application process because an operator would no longer be required to apply for a separate license to launch or reenter from a launch site other than that specified by the license. ---------------------------------------------------------------------------

\16\ For example, in 2018, a launch operator held a launch license under part 415 that authorized it to launch from Kennedy Space Center (KSC) in Florida; however, the operator contemplated launching from a nearby launch site, Cape Canaveral Air Force Station (CCAFS). Under current part 415, in order to launch from CCAFS instead of KSC, the operator has to file a separate application for a license to launch from CCAFS. ---------------------------------------------------------------------------

In order to apply for a license that includes multiple sites, an applicant would need to provide the FAA with application materials that would allow the FAA to conduct separate reviews for each site to determine, for example: Maximum probable loss required by part 440; public risk to populated areas, aircraft, and waterborne vessels; and the environmental impacts associated with proposed launches or reentries. The FAA foresees that a license that authorizes launches or reentries at more than one site would make it administratively easier for an operator to change sites for a particular operation. For example, an operator could move a launch from one site to another due to launch facility availability. A launch might move from CCAFS to KSC. Additionally, FAA foresees multiple sites will be utilized by operators of hybrid vehicles at launch sites with runways as well as vehicles supporting operationally responsive space missions such as DARPA Launch Challenge. Under this proposed licensing regime, an applicant should be prepared to discuss its intent to conduct activity from multiple sites during pre-application consultation. This discussion would give both the applicant and the agency an opportunity to scope the application and identify any potential issues early on when changes to the application or proposed licensed activities would be less likely to cause additional issues or significant delays. The launch operator would not need to specify the specific launches that would be planned for each site. The FAA would continue its current practice for operator licenses of requiring a demonstration that a proposed range of activities, not every trajectory variation within that range, can be safely conducted in order to scope the license. The license would not need to be modified unless the proposed operation fell outside the authorized range. The FAA further notes that under Sec. 413.11, after an initial screening the FAA determines whether an application is complete enough to begin its review. If an application that includes multiple launch sites is complete enough for the FAA to accept it and begin its review, the 180-day review period under Sec. 413.15(a) would begin. However, if during the FAA's initial review it determines that an application is sufficiently complete to make a license determination for at least one launch site but not all launch sites included in the application, the FAA would have the option to toll the review period, as provided in Sec. 413.15(b). Alternatively, the FAA could continue its review of the part of the application with complete enough information and toll the portion involving any launch site with insufficient information to make a licensing determination. In either case, the FAA would notify the applicant as required by Sec. 413.15(c). Finally, the FAA proposes a more flexible approach to the duration of a vehicle operator license under Sec. 450.7 (Duration of a Vehicle Operator License). Specifically, the FAA would determine, based on information received from an applicant, the appropriate duration of the license, not to exceed five years. In making this determination, the FAA would continue its current practice of setting the duration of a license for specified launches to be approximately one year after the expected date of the activity. Currently, a launch-specific license expires upon completion of all launches authorized by the license or the expiration date stated in the license, whichever occurs first. An operator license remains in effect for two years for an RLV and five years for an ELV from the date of issuance. The FAA considered setting all license durations to five years, but rejected this option to allow an applicant to obtain a license for a limited specific activity rather than for a more general range of activities. An applicant may prefer a shorter license duration for a specific activity because a licensee has obligations under an FAA license, such as the requirements to demonstrate financial responsibility and allow access to FAA safety inspectors, and a shorter license duration would relieve an applicant of compliance with these requirements after the activity has ended. Unless an operator requests an operator license, currently good for either two or five years, the operator does not typically request a license duration. The FAA initially sets the duration to encompass the authorized activity. The FAA plans to continue its current practice of extending licenses through renewals or modifications to accommodate delays in authorized launches or reentries.

C. Performance-Based Requirements and Means of Compliance

SPD-2 directs the FAA to consider replacing prescriptive requirements in the commercial space flight launch and reentry licensing process with performance-based criteria. The ARC echoed the SPD-2 recommendation for performance-based requirements that allowed varying means of compliance proposed by the operator.\17\ In response to SPD-2 and the ARC recommendations, the FAA is proposing to replace many of the prescriptive licensing requirements with performance-based requirements. These performance-based requirements would provide flexibility, scalability, and adaptability as discussed in the introduction. An operator would be able to use an acceptable means of compliance to demonstrate compliance with the requirements. ---------------------------------------------------------------------------

\17\ ARC Report, at p. 7. ---------------------------------------------------------------------------

Currently, the FAA uses both prescriptive and performance-based requirements for launches and reentries respectively.\18\ Parts 415 and 417 provide detailed prescriptive requirements for ELVs. Although these requirements provide regulatory certainty, they have proven inflexible. As the industry grows and innovates, ELV operators have identified alternate ways of operating safely that do not comply with the regulations as written. This has forced operators to request waivers or equivalent-level-of safety-determinations (ELOS determinations), often close to scheduled launch dates. On the other hand, the performance- based regulations in parts 431 and 435 lack the detail to efficiently guide operators through the FAA's regulatory regime. Indeed, the FAA often fills these regulatory gaps by adopting part 417 requirements in practice. The process of adding regulatory certainty to these performance-based regulations by adopting part 417 requirements has been frustrating and contentious for both operators and the FAA. ---------------------------------------------------------------------------

\18\ Parts 415 and 417, and their associated appendices, provide primarily prescriptive requirements for licensing and launch of an ELV. Part 431 provides primarily performance- and process-based requirements for a launch and reentry of a reusable launch vehicle. Part 435 provides similar requirements to part 431 for the reentry of a reentry vehicle other than a reusable launch vehicle. Parts 431 and 435 rely on a system safety process performed by an operator in order to demonstrate adequate safety of the operation. ---------------------------------------------------------------------------

Adopting performance-based requirements that allow operators to use an acceptable means of compliance would decrease the need for waivers or ELOS determinations to address new technology advancements. An acceptable means of compliance is one means, but not the only means, by which a requirement could be met. The FAA would set the safety standard in regulations and identify any acceptable means of compliance currently available. The FAA would provide public notice of each means of compliance that the Administrator has accepted by publishing the acceptance

[[Page 15304]]

on its website, for example. This notification would communicate to the public and the industry that the FAA has accepted a means of compliance or any revision to an existing means of compliance. A consensus standards body, any individual, or any organization would be able to submit means of compliance documentation to the FAA for consideration and potential acceptance. An operator could also develop its own means of compliance to demonstrate it met the safety standard. Once the Administrator has accepted a means of compliance for that operator, the operator could use it in future license applications. The FAA would not provide public notice of individual operator-developed means of compliance. If any information submitted to the FAA as part of a means of compliance for acceptance is proprietary, it would be afforded the same protections as are applied today to license applications submitted under Sec. 413.9. For five of the proposed requirements, an operator would have to demonstrate compliance using a means of compliance that has been approved by the FAA before an operator could use it in a license application. These five requirements are flight safety systems (proposed Sec. 450.145), FSA methods (proposed Sec. 450.115), lightning flight commit criteria (proposed Sec. 450.163(a)), and airborne toxic concentration and duration thresholds (proposed Sec. Sec. 450.139 and 450.187). The FAA has developed Advisory Circulars (ACs) or identified government standards that discuss an acceptable means of compliance for each of these requirements, and has placed these documents in the docket for the public's review and comment. If an operator wishes to use a means of compliance not previously accepted by the FAA to demonstrate compliance with one of the five requirements, the FAA would have to review and accept it prior to an operator using that means of compliance to satisfy a licensing requirement. If an operator is interested in applying for the acceptance of a unique means of compliance, it should submit any data or documentation to the FAA necessary to demonstrate that the means of compliance satisfies the safety requirements established in the regulation. An operator should note that the FAA will take into account such factors as complexity of the means of compliance; whether the means of compliance is an industry, government, or voluntary consensus standard; and whether the means of compliance has been peer-reviewed during its review and determination. These factors may affect how quickly the FAA is able to review and make a determination. The time could range from a few days to many weeks. Although applying for the acceptance of a new means of compliance may take time, once an operator's unique means of compliance is accepted by the FAA, the operator can use it in future license applications. The FAA also anticipates that this process will result in flexibility for industry and will encourage innovation as industry and consensus standards bodies \19\ develop multiple ways for an operator to meet the requisite safety standards. The FAA believes this is the best approach to enabling new ways of achieving acceptable levels of safety through industry innovation, and seeks public comment on whether this approach may induce additional innovation through industry- developed consensus standards. ---------------------------------------------------------------------------

\19\ The FAA intends to rely increasingly on voluntary consensus standards as means of compliance. Section 12(d) of the National Technology Advancement Act (Pub. L. 104-113; 15 U.S.C. 3701, et seq.) directs federal agencies to use voluntary consensus standards in lieu of government-unique standards except where inconsistent with law or otherwise impractical. Because voluntary consensus bodies are made up of a wide selection of industry participants, and often also include FAA participation, the FAA expects its review of a means of compliance developed by a voluntary consensus standards body would be more expeditious than a custom means of compliance. Unlike means of compliance developed by a voluntary consensus standards body, a custom means of compliance would not be subject to peer review or independent review of the viability of the technical approach. ---------------------------------------------------------------------------

D. Launch From a Federal Launch Range

Both industry and the National Space Council have urged government agencies involved in the launch and reentry of vehicles by commercial operators to work towards common standards and to remove duplicative oversight. The ARC recommended an end goal of either exclusive FAA jurisdiction over commercial launches at a range, or a range adopting the same flight safety regulations used by the FAA. SPD-2 directed the Secretary of Defense, the Secretary of Transportation, and the NASA Administrator to coordinate to examine all existing U.S. Government requirements, standards, and policies associated with commercial space flight launch and reentry operations from Federal launch ranges and minimize those requirements, except those necessary to protect public safety and national security, that would conflict with the efforts of the Secretary of Transportation in implementing the Secretary's responsibilities to review and revise its launch and reentry regulations.\20\ Most recently, the John S. McCain National Defense Authorization Act for Fiscal Year 2019 includes a provision stating that the Secretary of Defense may not impose any requirement on a licensee or transferee that is duplicative of, or overlaps in intent with, any requirement imposed by the Secretary of Transportation under 51 U.S.C. chapter 509, unless imposing such a requirement is necessary to avoid negative consequences for the national security space program.\21\ ---------------------------------------------------------------------------

\20\ SPD-2; May 24, 2018 (https://www.whitehouse.gov/presidential-actions/space-policy-directive-2-streamlining-regulations-commercial-use-space). \21\ Section 1606(2)(A), John S. McCain National Defense Authorization Act for Fiscal Year 2019, Public Law 115-232 (amending 51 U.S.C. 50918 note). ---------------------------------------------------------------------------

Currently, the FAA issues a safety approval to a license applicant proposing to launch from a Federal launch range if the applicant satisfies the requirements of part 415, subpart C, and has contracted with the range for the provision of safety-related launch services and property, as long as an FAA Launch Site Safety Assessment (LSSA) \22\ shows that the range's launch services and launch property satisfy part 417. The FAA assesses each range and determines if the range meets FAA safety requirements. If the FAA assessed a range, through its LSSA, and found that an applicable range safety-related launch service or property satisfies FAA requirements, then the FAA treats the range's launch service or property as that of a launch operator's, and there is no need for further demonstration of compliance to the FAA. The FAA reassesses a range's practices only when the range chooses to change its practice. ---------------------------------------------------------------------------

\22\ LSSA is an FAA evaluation of Federal range services and launch property. ---------------------------------------------------------------------------

The ARC recommended that ranges and the FAA have common flight safety regulations and guidance documents. To address this recommendation, the FAA proposes performance-based requirements for both ground and flight safety that an operator could meet using Air Force and NASA practices as a means of compliance. The FAA expects that there will be few, if any, instances where Air Force or NASA practices do not satisfy the proposed performance-based requirements. Additionally, the proposed requirements should provide enough flexibility to accommodate changes in Air Force and NASA practices in the future. The FAA expects that range services that a range applies to U.S. Government launches and

[[Page 15305]]

reentries will almost invariably satisfy the FAA's proposed requirements. The FAA currently accepts flight safety analyses performed by Air Force on behalf of an operator without additional analysis and anticipates that it would give similar deference to other analyses by federal agencies once it established that they meet FAA requirements. The FAA developed this approach to reduce operator burden to the largest extent possible. The FAA is bound to execute its statutory mandates and may do so only to the extent authorized by those statutes. Although federal entities often have complimentary mandates and statutory authorities, they are rarely identical. That is, each federal department or agency has been given separate mission. Federal entities establish interagency processes to manage closely related functions in as smoothly and least burdensome manner possible. Coordinating FAA requirements, range practices, and those practices implemented at other Federal facilities is largely an interagency issue, this proposal does not include language to eliminate duplicative approvals. Instead, the FAA will continue to work with the appropriate agencies to streamline commercial launch and reentry requirements at ranges and Federal facilities by leveraging the Common Standards Working Group (CSWG).\23\ ---------------------------------------------------------------------------

\23\ The CSWG consists of range safety personnel from the Air Force and NASA, and was chartered in the early 2000's to develop and maintain common launch safety standards among agencies. ---------------------------------------------------------------------------

E. Safety Framework

In addition to proposing a single vehicle operator license and replacing prescriptive requirements with performance-based requirements, this rule would rely on a safety framework that provides the flexibility needed to accommodate current and future operations and the regulatory certainty lacking in some of the current regulations. This proposal would consolidate the launch and reentry safety requirements in subpart C. Figure 2 depicts the safety framework on which the FAA relied in developing its proposed safety requirements. In developing this framework, the FAA considered following the approach taken in parts 431 and 435 and relying almost exclusively on a robust systems safety approach. As noted earlier, experience has shown that part 431 does not offer enough specificity and, as a result, it has been unclear to operators what safety measures the FAA requires to achieve an acceptable level of safety. In particular, there are no explicit requirements for ground safety, flight safety analysis, or flight safety systems. On the other hand, part 417 is too prescriptive, particularly regarding design and detailed procedural requirements for ground safety, detailed design and test requirements for flight safety systems, and numerous plans that placed needless burden on operators and impeded innovation. Thus, the framework described below is designed to strike a balance between these two parts. The proposed regulations clearly lay out FAA expectations, but should provide a launch or reentry operator with flexibility on how it achieves acceptable public safety. The framework also seeks to allow operators that wish to conduct operations using proven hazard control strategies to do so. [GRAPHIC] [TIFF OMITTED] TP15AP19.001

System Safety Program. All operators would be required to have a system safety program that would establish system safety management principles for both ground and flight safety throughout the operational lifecycle of a launch or reentry system. The system safety program would include a safety organization, procedures, configuration control, and post-flight data review. Preliminary Flight Safety Assessment. For flight safety, an operator would conduct a preliminary flight safety assessment to identify public hazards and determine the appropriate hazard control strategy for a phase of flight or an entire flight. An operator could use traditional hazard controls such as physical containment, wind weighting, or flight abort to mitigate hazards. Physical containment is when a launch vehicle does not have sufficient energy for any hazards associated with its flight to reach the public or critical assets.

[[Page 15306]]

Wind weighting is when the operator of an unguided suborbital launch vehicle adjusts launcher azimuth and elevation settings to correct for the effects of wind conditions at the time of flight to provide a safe impact location for the launch vehicle or its components. Flight Abort is the process to limit or restrict the hazards to public health and safety and the safety of property presented by a launch vehicle or reentry vehicle, including any payload, while in flight by initiating and accomplishing a controlled ending to vehicle flight. Flight abort as a hazard control strategy would be required for a phase of flight that is shown by a consequence analysis to potentially have significant public safety impacts. Otherwise, an operator would be able to bypass these traditional hazard control strategies and conduct a flight hazard analysis. Flight Hazard Analysis. As an alternative to traditional hazard control measures, an operator would be able to conduct a flight hazard analysis to derive hazard controls. Hazard analysis is a proven engineering discipline that, when applied during system development and throughout the system's lifecycle, identifies and mitigates hazards and, in so doing, eliminates or reduces the risk of potential mishaps and accidents. In addition, a separate hazard analysis methodology is outlined for computing systems and software. Flight Safety Analysis. Regardless of the hazard control strategy chosen or mandated, an operator would be required to conduct a number of flight safety analyses. At a minimum, these analyses would quantitatively demonstrate that a launch or reentry meets the public safety criteria for debris, far-field overpressure, and toxic hazards. Other analyses support flight abort and wind weighting hazard control strategies and determine flight hazard areas.\24\ For a detailed discussion, please see the ``Additional Technical Justification and Rationale'' discussion later in the preamble. ---------------------------------------------------------------------------

\24\ Note that flight hazard analysis and flight safety analysis are interdependent in that each can help inform the other. Flight safety analysis quantifies the risks posed by hazards, which are typically identified and mitigated during the flight hazard analysis, by using physics to model how the vehicle will respond to specific failure modes. The FSA is also useful to define when operational restrictions are necessary to meet quantitative risk requirements. ---------------------------------------------------------------------------

Derived Hazard Controls. An operator would derive a number of hazard controls through its conduct of a flight hazard analysis and flight safety analyses. Prescribed Hazard Controls. Regardless of the hazard controls derived from a flight hazard analysis and flight safety analyses, the FAA would require a number of other hazard controls that have historically been necessary to achieve acceptable public safety. These include requirements for flight safety and other safety critical systems, agreements, safety-critical personnel qualifications, crew rest, radio frequency management, readiness, communications, preflight procedures, surveillance and publication of hazard areas, lightning hazard mitigation, flight safety rules, tracking, collision avoidance, safety at the end of launch, and mishap planning. Acceptable Flight Safety. All elements of the safety framework combine to provide acceptable public safety during flight. In proposed Sec. 450.101 (Public Safety Criteria), the FAA would outline specific public safety criteria to clearly define how safe is safe enough. Section 450.101 is discussed in detail later in this preamble. Ground Safety. With respect to ground safety, an operator would conduct a ground hazard analysis to derive ground hazard controls. Those, along with prescribed hazard controls, would provide acceptable public safety during ground operations.

Flight Safety

A. Public Safety Criteria

Proposed Sec. 450.101 would consolidate all public safety criteria for flight into one section. It would contain the core performance- based safety requirements to protect people and property on land, at sea, in the air, and in space. All other flight safety requirements in proposed part 450 subpart C would support the achievement of these criteria. The Sec. 450.101 requirements would define how safe is safe enough for the flight of a commercial launch or reentry vehicle. Proposed Sec. 450.101(a) contains launch risk criteria, or the risk thresholds an operator may not exceed during flight. An operator would be permitted to initiate the flight of a launch vehicle only if the collective, individual, aircraft, and critical asset risk satisfy the proposed criteria. The criteria would apply to every launch from liftoff through orbital insertion for an orbital launch, and through final impact or landing for a suborbital launch, which is the same scope used for current launch risk criteria in parts 417 and 431. Each measure of risk serves a different purpose. Collective risk addresses the risk to a population as a whole, whereas individual risk addresses the risk to each person within a population. The measure of aircraft risk is unique, due to the difficulty of modeling collective and individual risk for aircraft in flight. Lastly, critical asset risk addresses the loss of functionality of an asset that is essential to the national interests of the United States. Critical assets include property, facilities, or infrastructure necessary to maintain national defense, or assured access to space for national priority missions. Proposed Sec. 450.101(a)(1) would establish the collective risk criteria for flight, measured by expected casualties (EC). The proposal would define EC as the mean number of casualties predicted to occur per flight operation if the operation were repeated many times. The term casualties refers to serious injuries or worse, including fatalities. It would require the risk to all members of the public, excluding persons in aircraft and neighboring operations personnel, to not exceed an expected number of 1 x 10-\4\ casualties, posed by impacting inert and explosive debris, toxic release, and far field blast overpressure.\25\ With two exceptions, this is the same criteria currently used in Sec. Sec. 417.107(b)(1) and 431.35(b)(1)(i). The first exception applies to people on waterborne vessels, who would now be included in the collective risk criteria to all members of the public. The second exception applies to neighboring operations personnel. This proposal would require the risk to all neighboring operations personnel not exceed an expected number of 2 x 10-\4\ casualties. Both of these topics are discussed separately later in this preamble. ---------------------------------------------------------------------------

\25\ Far field blast overpressure is a phenomenon resulting from the air blast effects of large explosions that may be focused by certain conditions in the atmosphere through which the blast waves propagate. Population may be at risk from broken window glass shards. ---------------------------------------------------------------------------

Proposed Sec. 450.101(a)(2) would establish the individual risk criteria for flight, measured by probability of casualty (PC). The proposal would define PC as the likelihood that a person will suffer a serious injury or worse, including a fatal injury, due to all hazards from an operation at a specific location. It would require the risk to any individual member of the public, excluding neighboring operations personnel, to not exceed a PC of 1 x 10-\6\ per launch, posed by impacting inert and explosive debris, toxic release, and far field blast overpressure. With one exception, this is the same criteria currently in Sec. Sec. 417.107(b)(2) and 431.35(b)(1)(iii). The exception is neighboring operations personnel would have separate individual risk criteria, which is discussed later in this preamble. Proposed Sec. 450.101(a)(3) would set aircraft risk criteria for flight. It would

[[Page 15307]]

require a launch operator to establish any aircraft hazard areas necessary to ensure the probability of impact with debris capable of causing a casualty for aircraft does not exceed 1 x 10-6. This is the same requirement as current Sec. 417.107(b)(4). Part 431 does not have aircraft risk criteria, although the FAA's current practice is to use the part 417 criteria for launches licensed under part 431. With this proposal, the FAA would expressly apply this criterion to all launches. The FAA does not propose any other changes for the protection of aircraft at this time. The FAA has an ongoing Airspace Access ARC, composed of commercial space transportation and aviation industry representatives, whose recommendations may inform a future rulemaking on protection of aircraft. Proposed Sec. 450.101(a)(4) would set the launch risk criteria for critical assets. It would require the probability of loss of functionality for each critical asset to not exceed 1 x 10-\3\, or some other more stringent probability if deemed necessary to protect the national security interests of the United States. This would be a new requirement and is discussed separately later in this preamble. Proposed Sec. 450.101(b) would define risk criteria for reentry. These would be the same as the risk criteria for launch, except that the proposed criteria would apply to each reentry, from the final health check prior to the deorbit burn through final impact or landing. The same discussion earlier regarding collective risk, individual risk, aircraft risk, and risk to critical assets would apply to the reentry risk criteria. Proposed Sec. 450.101(c) would set the flight abort criteria for both launch and reentry. It represents the most significant change to public safety criteria in this proposed rule. It would require that an operator use flight abort as a hazard control strategy if the consequence of any reasonably foreseeable vehicle response mode,\26\ in any one-second period of flight, is greater than 1 x 10-3 conditional expected casualties (CEC) for uncontrolled areas.\27\ CEC is the consequence, measured in terms of EC, without regard to the probability of failure, and will be discussed in the Consequence Protection Criteria for Flight Abort and Flight Safety System section. Flight abort with the use of an FSS and applying the CEC criteria in proposed part 450 is discussed later in this preamble. Proposed Sec. 450.101(c) would apply to all phases of flight, unless otherwise agreed to by the FAA based on the demonstrated reliability of the launch or reentry vehicle during that phase of flight. The flight of a certificated aircraft that is carrying a rocket to a drop point is an example of when the use of an FSS would likely not be necessary even though the CEC could be above the threshold, because the aircraft would have a demonstrated high reliability. ---------------------------------------------------------------------------

\26\ Vehicle response mode means a mutually exclusive scenario that characterizes foreseeable combinations of vehicle trajectory and debris generation. \27\ Uncontrolled Area is an area of land not controlled by a launch or reentry operator, a launch or reentry site operator, an adjacent site operator, or other entity by agreement. ---------------------------------------------------------------------------

Proposed Sec. 450.101(d) would establish disposal \28\ safety criteria. It would require that an operator conducting a disposal of a vehicle stage or component from Earth orbit either meet the criteria of Sec. 450.101(b)(1), (2), and (3), or target a broad ocean area. Because a launch vehicle stage or component will not survive a disposal substantially intact, disposal is not considered a reentry.\29\ Disposal is an effective method of orbital debris prevention because it eliminates the vehicle stage or component as a piece of orbital debris and as a risk for future debris creation through collision. The FAA is not proposing to require that a launch operator dispose of any upper stage or component in this rulemaking. The current proposal would only apply if a launch operator chooses to dispose of its upper stage or other launch vehicle component. Although an operator could choose to demonstrate that the proposed collective and individual risk criteria are met for a disposal, the FAA expects most, if not all, disposals to target a broad ocean area.\30\ This is consistent with current practice and NASA Technical Standards.\31\ Because the broad ocean area has such a low density of people that are exposed almost exclusively in large waterborne vessels, objects that survive reentry to impact in these areas produce an insignificant PC. Therefore, operators disposing a vehicle stage or component into a broad ocean area would not need to demonstrate compliance with the collective, individual, or aircraft risk criteria. For purposes of this proposal, the FAA considers ``broad ocean'' as an area 200 nautical miles (nm) from land. Two hundred nm is also the recognized limit of exclusive economic zones (EEZ), which are zones prescribed by the United Nations Convention on the Law of the Sea \32\ over which the owning state has exclusive exploitation rights over all natural resources. Disposal beyond an EEZ further reduces the chance of disrupting economic operations such as commercial fishing. ---------------------------------------------------------------------------

\28\ The FAA proposes to define ``disposal'' in Sec. 401.5 to mean the return or attempt to return, purposefully, a launch vehicle stage or component, not including a reentry vehicle, from Earth orbit to Earth, in a controlled manner. The proposed definition is discussed later in this preamble. \29\ A ``reentry'' is defined in 51 U.S.C. 50902, as ``to return or attempt to return, purposefully, a reentry vehicle and its payload or human beings, if any, from Earth orbit or from outer space to Earth.'' A ``reentry vehicle'' is defined as ``a vehicle designed to return from Earth orbit or outer space to Earth, or a reusable launch vehicle designed to return from Earth orbit or outer space to Earth, substantially intact.'' \30\ A disposal that ``targets a broad ocean area'' would wholly contain the disposal hazard area within a broad ocean area. \31\ NASA-STD-8715.14A, paragraph 4.7.2.1.b, states, ``For controlled reentry, the selected trajectory shall ensure that no surviving debris impact with a kinetic energy greater than 15 joules is closer than 370 km from foreign landmasses, or is within 50 km from the continental U.S., territories of the U.S., and the permanent ice pack of Antarctica.'' \32\ United Nations Convention on the Law of the Sea, Dec. 10, 1982, 1833 U.N.T.S. 397. Although the United States has not ratified UNCLOS, its comprehensive legal framework codifies customary international law governing uses of the ocean. ---------------------------------------------------------------------------

Proposed Sec. 450.101(e) would address the protection of people and property on-orbit, through collision avoidance requirements during launch or reentry and through requirements aimed at preventing explosions of launch vehicle stages or components on-orbit. Specifically, proposed Sec. 450.101(e)(1) would require a launch or reentry operator to prevent the collision between a launch or reentry vehicle stage or component, and people or property on-orbit, in accordance with the requirements in proposed Sec. 450.169(a) (Launch and Reentry Collision Avoidance Analysis Requirements). Proposed Sec. 450.101(e)(2) would require that a launch operator prevent the creation of debris through the conversion of energy sources into energy that fragments the stage or component, in accordance with the requirements in proposed Sec. 450.171 (Safety at End of Launch). Proposed Sec. 450.171 would contain the same requirements as in Sec. Sec. 417.129 and 431.43(c)(3). Both Sec. Sec. 450.169(a) and 450.171 are addressed in greater detail later in the preamble. Proposed Sec. 450.101(f) would require that an operator for any launch, reentry, or disposal notify the public of any region of land, sea, or air that contains, with 97 percent probability of containment, all debris resulting from normal flight events capable of causing a casualty. The requirement to notify the public of planned impacts is currently in Sec. Sec. 417.111(i)(5) and 431.75(b). The calculation of such hazard areas is discussed later in this preamble in the

[[Page 15308]]

discussion of proposed Sec. 450.133 (Flight Hazard Areas). Notification of planned impacts would be included in proposed Sec. 450.101 because it is not tied to risk and is therefore not covered by the other public safety criteria of proposed Sec. 450.101. In proposed Sec. 450.101(g), the FAA would establish performance level requirements for the validity of analysis methods. Specifically, consistent with the existing language in Sec. 417.203(c) and current practice for launch and reentry assessments, an operator's analysis method would have to use accurate data and scientific principles and be statistically valid. ``Accurate data'' would continue to refer to completeness, exactness, and fidelity to the maximum extent practicable. In this context, ``scientific principles'' would continue to refer to knowledge based on the scientific method, such as that established in the fields of physics, chemistry, and engineering. An analysis based on non-scientific principles, such as astrology, would not be consistent with this standard. A ``statistically valid'' analysis would be the result of a sound application of mathematics and would account for the uncertainty in any statistical inference due to sample size limits, the degree of applicability of data to a particular system, and the degree of homogeneity of the data. 1. Neighboring Operations Personnel Two of the proposed requirements in Sec. 450.101 that do not exist in the current regulations carve out separate individual and collective risk criteria for neighboring operations personnel. With the increase in operations and launch rate, the Air Force, NASA, and the industry have expressed concerns about the FAA's public risk criteria because in certain circumstances they force an operator to clear or evacuate any other launch operator and its personnel not involved with a specific FAA-licensed operation from a hazard area or safety clear zone during certain licensed activities.\33\ The clearing or evacuation of other launch operator personnel, which can range from a handful of workers to over a thousand for a significant portion of a day, results in potential schedule impacts and lost productivity costs to other range users. These impacts will increase as the launch tempo increases and similar operations are conducted at other sites. ---------------------------------------------------------------------------

\33\ To illustrate the problematic nature of the current risk requirements as they are applied to the public, flybacks and landings of reusable boosters at Cape Canaveral Air Force Station conducted under an FAA license are causing operational impacts to other range users due to FAA requirements to clear the public, including range users not involved with the launch, to meet public safety criteria. ---------------------------------------------------------------------------

The Air Force, NASA, and industry have recommended that the FAA treat certain personnel of other launch operators, referred to in this proposed rulemaking as ``neighboring operations personnel,'' differently than the rest of the public who are typically visitors, tourists, or people who are located outside a launch site and are not aware of the hazards nor trained and prepared to respond to them. Specifically, they recommend that the FAA characterize neighboring operations personnel who work at a launch site as either non-public or subject to a higher level of risk than the rest of the public, to minimize the need to evacuate them during certain licensed operations.\34\ ---------------------------------------------------------------------------

\34\ The Air Force requested that the FAA propose an approach that allows certain neighboring operations personnel during an FAA- licensed launch to be assessed at the Air Force's higher launch essential risk criteria of 10 x 10-6 individual probability of casualty. Also, Air Force and NASA members of the CSWG have asked for increased flexibility with the collective risk EC for flight to accommodate neighboring operations personnel. As one of its recommendations to the National Space Council in November 2017, NASA suggested a change to operational requirements to clear employees from hazard areas during commercial operations under an FAA license. ---------------------------------------------------------------------------

The ARC recommended: (1) Excluding permanently badged personnel and neighboring launch operations from the definition of ``public''; (2) revising the definition of ``public safety'' because the current definition is overly broad, ambiguous, and inconsistent with other federal agencies, including the Air Force; (3) distinguishing between ``public'' (i.e., those uninvolved individuals located outside the controlled-access boundaries of a launch or reentry site or clustered sites within a defined Federal or private spaceport) and people who work regularly within the controlled-access boundaries of a Federal or private spaceport or an operator's dedicated launch or reentry site; \35\ and (4) employing mitigation measures for uninvolved neighboring operations personnel when a hazardous operation or launch is scheduled.\36\ ---------------------------------------------------------------------------

\35\ According to the ARC, these individuals who work regularly within the boundaries of a federal range or private spaceport are industry workers who know and accept the risks associated with the hazardous environment in which they work. \36\ These mitigations might include: facility separation distances (e.g., separation between launch points on a multi-user spaceport) that anticipate and allow for safe concurrent operations; terms in site and use agreements with the Federal or non-Federal property owner that indemnify and hold harmless the government or other landlord; and potential reciprocal waivers (not required by regulation) that may be entered into among neighboring operations to share risks of hazards to each other's property and personnel. ---------------------------------------------------------------------------

i. FAA Proposed Definitions of Public and Neighboring Operations Personnel in Sec. 401.5 To address these concerns, the FAA proposes to add two definitions to Sec. 401.5. The first is ``public,'' which the FAA would define in Sec. 401.5, for a particular licensed or permitted launch or reentry, as people and property that are not involved in supporting the launch or reentry. This would include those people and property that may be located within the launch or reentry site, such as visitors, individuals providing goods or services not related to launch or reentry processing or flight, and any other operator and its personnel. This language is similar to the current definition of ``public safety'' in Sec. 401.5, which the FAA proposes to delete, except that the FAA has included reentry and permitted activities in the definition.\37\ ---------------------------------------------------------------------------

\37\ The FAA would also delete the definition of ``public'' in Sec. 420.5 for launch sites, which means people and property that are not involved in supporting a licensed or permitted launch. The new definition of public in Sec. 401.5 will apply to all parts, including part 420. ---------------------------------------------------------------------------

The second is the definition of ``neighboring operations personnel,'' which the FAA would define in Sec. 401.5 as those members of the public located within a launch or reentry site, as determined by the Federal or licensed launch or reentry site operator,\38\ or an adjacent launch or reentry site, who are not associated with a specific hazardous licensed or permitted operation currently being conducted but are required to perform safety, security, or critical tasks at the site and are notified of the hazardous operation. While neighboring operations personnel would still fall under the proposed definition of public, this proposal would apply different individual and collective risk criteria to them. The FAA seeks comment on this approach. ---------------------------------------------------------------------------

\38\ Since neighboring operations personnel, as defined in this proposal, work at a launch or reentry site, the FAA expects that the site operator (i.e., an operator of a Federal site or FAA-licensed launch or reentry site), not the launch operator, would identify these personnel. ---------------------------------------------------------------------------

In developing its proposal, the FAA looked to NASA and Air Force requirements, which treat a portion of the public differently than the FAA regulations by allowing some other launch operators and their personnel, referred to as ``neighboring operations personnel'' by the Air Force \39\ and

[[Page 15309]]

``critical operations personnel'' by NASA,\40\ to be subjected to a higher level of risk than the rest of the public. This approach lessens the impact to multiple users and enables concurrent operations at a site. The FAA's proposed definition more closely aligns with the definitions of neighboring operations personnel and critical operations personnel adopted by the Air Force and NASA, respectively, because it distinguishes neighboring operations personnel as personnel required to perform safety, security, or critical tasks and who are notified of neighboring hazardous operations. Critical tasks may include maintaining the security of a site or facility or performing critical launch processing tasks such as monitoring pressure vessels or testing safety critical systems of a launch vehicle for an upcoming mission. ---------------------------------------------------------------------------

\39\ The Air Force has two sub-categories of public: Neighboring operations personnel and the general public. For a specific launch, the general public includes all visitors, media, and other non- essential personnel at the launch site, as well as persons located outside the boundaries of the launch site. For the Air Force, neighboring operations personnel are individuals, not associated with the specific operation or launch currently being conducted, required to perform safety, security, or critical tasks at the launch base, and who are notified of a neighboring hazardous operation and are either trained in mitigation techniques or accompanied by a properly trained escort. In accordance with guidance information in AFSPCMAN 91-710V1, neighboring operations personnel may include individuals performing launch processing tasks for another launch, but do not include individuals in training for any job or individuals performing routine activities such as administrative, maintenance, support, or janitorial. AFSPCMAN 91- 710V1 can be found at https://static.e-publishing.af.mil/production/1/afspc/publication/afspcman91-710v1/afspcman91-710v1.pdf. The Air Force may allow neighboring operations personnel to be within safety clearance zones and hazardous launch areas, and neighboring operations personnel would not be evacuated with the general public. The Air Force includes neighboring operations personnel in the same risk category as launch-essential personnel. The allowable collective aggregated risk for launch essential personnel is 300 x 10-6 and the allowable individual risk for launch essential personnel is 10 x 10-6. \40\ NASA, for the purposes of range safety risk management, defines public as visitors and personnel inside and outside NASA- controlled locations who are not critical operations personnel or mission essential personnel and who may be on land, on waterborne vessels, or in aircraft. Similar to the Air Force's definition of neighboring operations personnel, NASA considers critical operations personnel to include persons not essential to the specific operation (launch, reentry, flight) being conducted, but who are required to perform safety, security, or other critical tasks at the launch, landing, or flight facility; are notified of the hazardous operation and either trained in mitigation techniques or accompanied by a properly trained escort; are not in training for any job or individuals performing routine activities such as administrative, maintenance, or janitorial activities; and may occupy safety clearance zones and hazardous areas, and are not evacuated with the public. NASA includes critical operations personnel in the same risk category as mission essential personnel. For flight, the allowable collective aggregated risk for the combination of mission essential personnel and critical operations personnel is 300 x 10-6 and the allowable individual risk for mission essential or critical operations personnel is 10 x 10-6. ---------------------------------------------------------------------------

Because of these specific duties, neighboring operations personnel are more likely than the rest of the public to be specially trained and prepared to respond to hazards present at a launch or reentry site. Those hazards include exposure to debris, overpressure, toxics, and fire. The Air Force and NASA definitions specify that these personnel are either trained in mitigation techniques or accompanied by a properly trained escort. Note, however, that the FAA would not require that neighboring operations personnel be trained or accompanied by a trained escort. It would be burdensome to require a licensee to ensure neighboring operations personnel are trained, and training is not necessary to justify the slight increase in risk allowed for workers performing safety, security, or critical tasks. The FAA proposal would not include all permanently badged personnel on a launch or reentry site as neighboring operations personnel. While neighboring operations personnel are permanently-badged personnel, including all permanently-badged personnel as neighboring operations personnel could then include individuals performing routine activities such as administrative, maintenance, or janitorial duties. These individuals are not necessary for critical tasks. Unlike for neighboring operations personnel, the disruption to routine activities does not sufficiently justify allowing these individuals to remain on site during hazardous operations. ii. Individual Risk Level for Neighboring Operations Personnel Currently, for ELVs, the individual risk criterion for the public in Sec. 417.107(b)(2) allows a launch operator to initiate flight only if the risk to any individual member of the public does not exceed 1 x 10-6 per launch for each hazard. Part 431 is similar for an RLV mission. Thus, any person not involved in supporting a launch or reentry, whether within or outside the bounds of the launch or reentry site, are required to have a risk of casualty no higher than 1 x 10-6 per launch or reentry for each hazard. The FAA proposes in Sec. 450.101(a)(2) a higher individual risk criterion of 1 x 10-5 for neighboring operations personnel compared to 1 x 10-6 for the rest of the public for launch and reentry. Although neighboring operations personnel would still fall under the FAA's definition of public, this proposal would establish a higher risk threshold for neighboring operations personnel as compared to other members of the public. This proposal would permit neighboring operations personnel to remain on site because--unlike other members of the public such as visitors or tourists--the presence of these personnel at a launch or reentry site is necessary for security or to avoid the disruption of launch or reentry activities at neighboring sites. In addition, the proposed increased risk to which these personnel would be exposed is minimal. iii. Collective Risk Level for Neighboring Operations Personnel Sections 417.107(b)(1) and 431.35(b)(1)(i) and (ii) currently require that for each proposed launch or reentry, the risk level to the collective members of the public, which would include neighboring operations personnel but exclude persons in water-borne vessels and aircraft, must not exceed an expected number of 1 x 10-4 casualties from impacting inert and explosive debris and toxic release associated with the launch or reentry. Similar to individual risk, the FAA proposes a separate collective risk criterion for neighboring operations personnel in Sec. 450.101(a)(1). This proposal would permit a launch operator to initiate the flight of a launch vehicle only if the total risk associated with the launch to all members of the public, excluding neighboring operations personnel and persons in aircraft, does not exceed an expected number of 1 x 10-4 casualties. Additionally, a launch operator would be permitted to initiate the flight of a launch vehicle only if the total risk associated with the launch to neighboring operations personnel did not exceed an expected number of 2 x 10-4 casualties. These risk criteria would also apply to reentry. These proposed requirements would enable neighboring operations personnel to remain within safety clear zones and hazardous launch areas during flight. Additionally, neighboring operations personnel would not be required to evacuate with the rest of the public as long as their collective risk does not exceed 2 x 10-4. The rationale is the same as that for individual risk. While the FAA proposal would add a separate collective risk limit for neighboring operations personnel, the collective risk limit for the public other than neighboring operations personnel would not be able to exceed 1 x 10-4 for flight. iv. Maximum Probably Loss (MPL) Thresholds for Neighboring Operations Personnel Under a license, an operator must obtain liability insurance or demonstrate financial responsibility to compensate for the maximum probable loss from claims by a third party for

[[Page 15310]]

death, bodily injury, or property damage or loss.\41\ For financial responsibility purposes under 14 CFR part 440, neighboring operations personnel qualify as third parties.\42\ Thus, allowing neighboring operations personnel to remain within hazard areas has the potential to increase the maximum probable loss, and therefore the amount of third party liability insurance that a licensee would be required to obtain. However, this would be fully or partially mitigated by changing the threshold value used to determine MPL for neighboring operations personnel. ---------------------------------------------------------------------------

\41\ An operator must also obtain liability insurance or demonstrate financial responsibility to compensate the U.S. Government for damage or loss to government property, but this is not affected by the neighboring operations personnel proposal. \42\ Title 51 U.S.C. 50902 defines third party as a person except the U.S. Government or its contractors or subcontractors involved in the launch or reentry services; a licensee or transferee under Chapter 509 and its contractors, subcontractors or customers involved in launch or reentry services; the customer's contractors or subcontractors involved in launch or reentry services; or crew, government astronauts, or space fight participants. Section 440.3 incorporates this definition into the regulations. ---------------------------------------------------------------------------

The MPL is the greatest dollar amount of loss that is reasonably expected to result from a launch or reentry. Current regulations define what is reasonable by establishing probability thresholds: Losses to third parties that are reasonably expected to result from a licensed or permitted activity are those that have a probability of occurrence of no less than one in ten million. Losses to government property and government personnel involved in licensed or permitted activities that are reasonably expected to result from licensed or permitted activities are those that have a probability of occurrence of no less than one in one hundred thousand. Therefore, for any launch or reentry, there should only be a 1 in 10,000,000 (1 x 10-\7\) chance that claims from third parties would exceed the MPL value, and a 1 in 100,000 (1 x 10-\5\) chance that claims from the government for government property loss would exceed the MPL value. Because it is much less likely that claims from third parties would exceed the MPL value, the FAA's calculation of MPL takes into account a larger number of rare events that could result in a third party claim than could result in a government property claim. And, because the MPL calculation for third party liability involves consideration of more events related to non- government personnel third party losses than events related to government personnel losses, non-government third party losses are more likely to influence the MPL calculation. The difference in thresholds reflects the government's acceptance of greater risk in supporting launch and reentry activities than that accepted by the uninvolved public.\43\ ---------------------------------------------------------------------------

\43\ Subject to congressional appropriation, the Federal Government indemnifies a launch or reentry operator for claims above the insured amount up to $1.5 billion, adjusted for inflation from January 1989 (approximately $3 billion as of 2016). The lower the threshold used for calculating MPL, the greater chance that the Federal Government may need to indemnify a licensee. ---------------------------------------------------------------------------

The FAA proposes, for the purpose of determining MPL, that the threshold for neighboring operations personnel be the same as the threshold for losses to government property and involved government personnel, such that losses to neighboring operations personnel would have a probability of occurrence of no less than 1 x 10-\5\. This approach would be appropriate because unlike other third parties, except for involved government personnel, the presence of neighboring operations personnel at a launch or reentry site is necessary for security or to avoid the disruption of launch or reentry activities at neighboring sites. The presence of neighboring operations personnel during licensed activities would not influence the MPL value for third- party liability in most cases because, as discussed above, the 1 x 10-\5\ threshold would capture fewer events and therefore have less of an influence on MPL. The FAA seeks comment on this approach. v. Ground Operations Pertinent to Neighboring Operations Personnel For ground operations, the FAA currently does not have, nor is it proposing at this time, quantitative public risk criteria for neighboring operations personnel or the rest of the public. As will be discussed in greater detail later, an operator would conduct a ground hazard analysis to derive ground hazard controls. This analysis would be a qualitative, not quantitative. Thus, there would be no quantitative criteria to treat neighboring operations personnel differently than other members of the public during ground operations. An operator would be expected to use hazard controls to contain hazards within defined areas and to control public access to those areas. An operator may use industry or government standards to determine proper mitigations to protect the public, including neighboring operations personnel, from hazards. The impact on neighboring operations personnel during ground activities should be minimal. Additionally and as discussed later, the FAA is proposing that launch would begin at the start of preflight ground operations that pose a threat to the public, which could be when a launch vehicle or its major components arrive at a U.S. launch site, or at a later point as agreed to by the Administrator.\44\ Scoping preflight ground operations to only those that require FAA oversight would alleviate many of the previously-discussed issues associated with neighboring operations personnel. ---------------------------------------------------------------------------

\44\ The clause ``as agreed to by the Administrator'' is used throughout the proposed regulations, particularly in relation to timeframes discussed in detail later in this preamble. Where the clause is used, it means that an operator may submit an alternative to the proposed requirement to the FAA for review. The FAA must agree to the operator's proposal in order for the operator to use the alternative. By whatever means the FAA's agreement to an alternative is communicated to the operator, the agreement means that the alternative does not jeopardize public health and safety and the FAA has no objection to the submitted alternative. Unless the context of the situation clearly provides otherwise, ``as agreed to by the Administrator'' does not simply mean receipt by the FAA (i.e., that the item was given to a representative of the FAA and that person received it on behalf of the FAA). ---------------------------------------------------------------------------

2. Property Protection (Critical Assets) Another proposed requirement in Sec. 450.101 that does not exist in the current regulations is the proposal to adopt a critical asset protection criterion in proposed Sec. 450.101. To better inform this proposed requirement, the FAA would also amend Sec. 401.5 to add a definition of critical asset. Specifically, the probability of loss of functionality for each critical asset would not be able to exceed 1 x 10-\3\, or a more stringent probability if the FAA determines, in consultation with relevant federal agencies, it is necessary to protect the national security interests of the United States. This requirement is necessary to ensure a high probability of the continuing functionality of critical assets. A critical asset would be defined as an asset that is essential to the national interests of the United States, as determined in consultation with relevant federal agencies. Critical assets would include property, facilities, or infrastructure necessary to maintain national defense, or assured access to space for national priority missions. Critical assets would also include certain military, intelligence, and civil payloads, including essential infrastructure when directly supporting the payload at the launch site. Under this proposal, the FAA anticipates that it would work with relevant authorities, including a launch or reentry site operator or Federal property owner, to identify each ``critical asset'' and its potential vulnerability to launch and reentry hazards.

[[Page 15311]]

The FAA's existing risk criteria, currently found in Sec. Sec. 417.107(b) and 431.35(b), do not explicitly set any limit on the probability of loss of functionality for any assets on the surface of the Earth due to launch or reentry operations. An example of loss of functionality would be if a launch vehicle crashed on a nearby launch complex and resulted in damage that prevented the use of the launch complex until repaired. Currently, FAA requirements provide some protection for the safety of property during launch or reentry by limiting individual and collective risks because people are generally co-located with property. However, no protection is afforded for assets within areas that are evacuated. The proposed property protection criteria would be consistent with current practice at Federal launch ranges. Launch operations from NASA- operated ranges are subject to requirements that limit the probability of debris impact to less than or equal to 1 x 10-\3\ for designated assets. While the Air Force does not have a formal requirement, in practice, launch operations from Air Force-operated ranges have adopted the NASA standard. In the past, Federal launch ranges have, on occasion, applied a more stringent requirement limiting the probability of debris impact caused by launch or reentry hazards to less than or equal to 1 x 10-\4\ for national security payloads, including essential infrastructure when directly supporting the payload at the launch site. The FAA is looking to extend the protection of critical assets to non-Federal launch or reentry sites. The Pacific Spaceport (located on Kodiak Island, Alaska) is an example of a non-Federal launch or reentry site that is a dual-use commercial and military spaceport (meaning that commercial missions have been conducted there, as well as missions for the Department of Defense), which has no regulatory assurance of protection from loss of functionality of critical assets. For these reasons, the FAA has determined that a requirement to maintain a high probability of continuing functionality of critical assets at a launch site is necessary to ensure the safety of property and national security interests of the United States. Launch and reentry infrastructure used for commercial operations are increasingly in close proximity to critical assets, such as infrastructure used to support the national interests of the United States. The national interests of the U.S. relevant to this proposal go beyond national security interests, and include infrastructure used to serve high priority NASA missions as well. For example, the FAA considers launch and reentry services to deliver cargo to and from the International Space Station as national priority missions. As another example, the launch infrastructure used by SpaceX to launch the Falcon 9 from Kennedy Space Center is within 2 nm of the launch infrastructure used by ULA to launch the Atlas V, which are both used to support commercial operations and operations that serve the national interests of the United States. The FAA coordinated the development of this proposed critical asset protection requirement with NASA, the Department of Defense, and the Intelligence Community. Furthermore, the proposed property protection requirement would also help achieve the goal of common standards for launches from any U.S. launch site, Federal or non-Federal. Common standards are public safety related requirements and practices that are consistently employed by the Air Force, the FAA, and NASA during launch and reentry activities. Common standards would provide launch and reentry operators certainty in planning and enable a body of expertise to support those standards. Finally, the proposed property protection standards would apply to all FAA-licensed launches, whether to or from a Federal launch range or a non-Federal launch or reentry site. Applying the provision to non- Federal sites would ensure continuity in the protection of critical assets and that the probability of loss of functionality of critical assets is the same for all commercial launch and reentry operations. The FAA sees no reason for imposing different standards of safety for critical assets based on whether a launch takes place from a non- Federal launch site or from a Federal launch range, especially in light of the fact that some non-Federal sites are dual use, supporting both commercial and military operations. During the interagency review process, the Department of Defense requested and the FAA considered specifying a more stringent criterion for certain critical assets of utmost importance. This subcategory of critical assets would be known as critical payloads. Specifically, the FAA considered requiring the probability of loss of functionality for critical payloads, including essential infrastructure when directly supporting the payload at the launch site, not exceed 1 x 10-\4\. The FAA considered defining a critical payload as a critical asset that (1) is so costly or unique that it cannot be readily replaced, or (2) the time frame for its replacement would adversely affect the national interests of the United States. Critical payloads may include vital national security payloads, and high- priority NASA and NOAA payloads. For example, a payload such as NASA's Curiosity rover would likely be afforded this protection. The higher protection criterion would have safeguarded those payloads of utmost importance to the United States meriting a greater degree of protection than other critical assets. The specific 1 x 10-\4\ criterion would apply to those national priority payloads at a launch or reentry site, including essential infrastructure when directly supporting the payload. A federal agency would identify payloads meeting the definition of ``critical payload'' as warranting protection at the 1 x 10-\4\ level. These may include commercial payloads that meet the national interest described above. The FAA opted to not include this higher protection criterion due to uncertainty about its impact on future launch or reentry operations. Therefore, in order to properly analyze this request, the FAA requests comment on the following: (1) If the FAA adopted the more-stringent 1 x 10-\4\ criterion for critical payloads, what impacts would it have on your operation? (2) Should FAA consider applying this more-stringent criterion to any commercial payload? Please provide specific examples and rationale. (3) If this criterion is applied to commercial space launch and reentry operations, what would be the additional, incremental costs and benefits on your current and future operations compared to the proposed 1 x 10-\3\ criterion? Specifically, the FAA requests information and data to quantify additional costs and benefits of this criterion compared to the proposed 1 x 10-\3\ criterion. Please provide sources for information and data provided. 3. Consequence Protection Criteria for Flight Abort and Flight Safety System This proposal would expand the FAA's use of consequence criteria to protect the public from an unlikely but catastrophic event. Proposed Sec. 450.101(c) would require that operators quantify the consequence of a catastrophic event by calculating CEC for any one- second period of flight. Unlike EC that determines the expected casualties factoring in the probability that a dangerous event will occur, CEC determines the expected casualties assuming the dangerous event will occur. In essence, it represents the

[[Page 15312]]

consequence of the worst foreseeable events during a launch or reentry. The FAA proposes to use CEC to determine the need for flight abort with a reliable FSS as a hazard control strategy, to set reliability standards for any required FSS, and to determine when to initiate a flight abort. In other words, the more severe the potential consequences from an unplanned event, the more stringent the flight abort requirements. The current ELV flight abort regulations are essentially a one- size-fits-all approach. In practice, the current requirement in Sec. 417.107(a) requires an FSS for any orbital launch vehicle to prevent hazards from reaching protected areas at all times during flight. Regardless of the individual and collective risks, or the consequences in the case of a catastrophic event, all FSSs must satisfy part 417, subparts D and E, requirements.\45\ These include reliability requirements (0.999 reliable at 95 percent confidence) \46\ and extensive testing requirements. Besides requiring a potentially expensive FSS, the part 417 hazard control approach also has the potential to limit vehicle flight paths unnecessarily, even when those flight paths would produce low public risks and consequences. This preamble will discuss these areas in further detail later. ---------------------------------------------------------------------------

\45\ Part 417 sets specific FSS requirements covering general command control system requirements, command control system testing, FSS support systems, FSS analysis, and flight safety crew roles and qualifications. \46\ Section 417.309 requires that each onboard flight termination system and each command control system must have a predicted reliability of 0.999 at the 95 percent confidence level when operating, as well as predicted reliability of 0.999 at the 95 percent confidence for multiple component systems such as the ordnance train to propagate a charge, any safe-and-arm device, and ordinance interrupters and initiators. As these component systems define the reliability of the FSS and approximate the design reliability of the entire flight safety system, for the purpose of the preamble the current requirements are discussed as requiring an FSS to have predicted reliability of 0.999 at a 95 percent confidence level. This will be discussed later in the preamble in further detail. ---------------------------------------------------------------------------

The FAA also recognizes shortcomings in its current part 431 hazard control approach. Part 431 does not expressly require the use of an FSS to manage hazards. Rather, Sec. 431.35(c) requires a system safety process to identify hazards and assess the risk to public health and safety and the safety of property. The system safety approach has consistently resulted in the use of an FSS as a hazard control strategy. In practice, the FAA has applied part 417 FSS requirements to part 431 to ensure proper reliability and flight abort rules. Part 417 FSS requirements have proven difficult to scale to different operations. Indeed, the FAA has had to issue numerous waivers to these requirements to accommodate the fast-evolving commercial space industry. The need for waivers has been partially driven by changes to Air Force requirements, which diverged from FAA regulations beginning in 2013.\47\ For example, the FAA has repeatedly waived its requirement to activate an FSS to ensure no debris greater than 3 pounds per square foot (psf) ballistic coefficient \48\ reaches protected areas.\49\ In granting these waivers, the FAA has adopted the conditional risk management approach, noting that the predicted consequence was below a threshold of 1 x 10-\2\ CEC. The FAA has concluded that measuring the consequence from reasonably foreseeable, albeit unlikely, failures is an appropriate metric to assess prudent mitigations of risks to public health and safety and the safety of property.\50\ ---------------------------------------------------------------------------

\47\ The FAA regulations and Air Force requirements regarding flight abort were virtually identical from the time part 417 was promulgated in 2006 until 2013 when the Air Force provided permanent relief from the requirement for impact limit lines to bound where debris with a ballistic coefficient greater than 3 pounds per square foot can impact if the FSS works properly. The Air Force cited an ELOS determination when it issued the permanent relief, stating that the public risk criteria would still apply. \48\ Ballistic coefficient is a measure of an object's ability to overcome air resistance, and it is defined as the gross weight in pounds divided by the frontal area of the vehicle (in square feet) times the coefficient of drag. \49\ Waiver of Debris Containment Requirements for Launch. 81 FR 1470, 1470-1472 (January 12, 2016). \50\ Using consequence as safety criteria in FAA commercial space regulations is not without precedent. Section 431.43(d) sets a limit for foreseeable public consequences in terms of CEC, but only for an unproven RLV. Section 431.43(d) provides that an unproven RLV may only be operated so that during any portion of flight, the expected number of casualties does not exceed 1 x 10-\4\ given assuming a vehicle failure will occur at any time the instantaneous impact point is over a populated area. ---------------------------------------------------------------------------

The ARC also made recommendations with respect to flight abort and FSS requirements. It recommended the FAA tier the level of rigor for FSSs into three risk categories. In relevant part, ARC members proposed that the lowest risk category not require an FSS, that the medium risk category require streamlined FSS test requirements (e.g., reduce from three to one qualification units) and not require configuration and risk management, and the highest risk category require a Range Commanders Council (RCC) \51\ 319-compliant FSS. It also suggested the highest risk category could use another operational or design approach proven to address concerns of low probability/high consequence event. The ARC only identified risk as a means of scaling FSS requirements and did not recommend specific risk thresholds.\52\ ---------------------------------------------------------------------------

\51\ The Range Commanders Council addresses the common concerns and needs of operational ranges within the United States. It works with other government departments and agencies to establish various technical standards to assist range users. \52\ ARC Report at p. 12. ---------------------------------------------------------------------------

In light of the shortcomings identified by the FAA and ARC recommendations, the FAA agrees that the FAA's FSS requirements should be scaled. For that reason, the FAA proposes to use consequence to determine the need for an FSS, the required FSS reliability, and when to activate an FSS. To determine whether or not an FSS is needed, an operator would be required to calculate CEC in any one second period of flight. The calculation of CEC can range from a straightforward product of the effective casualty area and the population density to a high fidelity analysis.\53\ Proposed Sec. 450.101(c) would require, at a minimum, that an operator compute the effective casualty area and identify the population density that would be impacted for each reasonably foreseeable vehicle response mode in any one-second period of flight in terms of CEC. The casualty area, population density, and predicted consequence for each vehicle response mode are intermediate quantities that are necessary to demonstrate compliance with the individual and collective risk criteria currently, thus these new requirements would not necessarily impart significant additional burden on operators. ---------------------------------------------------------------------------

\53\ The FAA referenced the need to prevent a high consequence event in its evaluation of a 2016 waiver request, which enabled the first Return to Launch Site (RTLS) mission (Orbcomm-2). Specifically, the FAA noted that the 3 psf ballistic coefficient requirement of Sec. 417.213(d) was intended to (1) capture the current practice of the U.S. Air Force, (2) provide a clear and consistent basis to establish impact limit lines to determine the occurrence of an accident as defined by Sec. 401.5, and (3) help prevent a high consequence to the public given FSS activation. As part of the waiver rationale, the FAA cited the longstanding governing principle applied to launch safety: ``to provide for the public safety, the Ranges, using a Range Safety Program, shall ensure that the launch and flight of launch vehicles and payloads present no greater risk to the general public than that imposed by the over-flight of conventional aircraft.'' (Eastern and Western Range 127-1, Range Safety Requirements, Oct. 31, 1997) The waiver rationale also cited an analysis of 30 years of empirical evidence provided by the NTSB that showed that the public safety consequence associated with general aviation accidents is 1 x 10-\2\ expected fatalities. The FAA's analysis demonstrated that the consequence of events that could produce debris outside of the impact limit lines was consistent with the threshold of 1 x 10-\2\ CEC, even with input data corresponding to the worst-case weather conditions. Thus, the FAA concluded that the waiver would not jeopardize public health and safety or the safety of property. ---------------------------------------------------------------------------

The FAA is proposing to rely on CEC rather than EC to determine whether or

[[Page 15313]]

not an FSS is needed because FAA believes it is the best approach to implement the ARC's recommendation that the FAA treat high consequence events differently than lower consequence events. As noted earlier, the ARC recommended a three tiered approach--high risk would require a highly reliable FSS, medium risk would require an FSS with more streamlined requirements, and low risk would require no FSS. The FAA's approach of using a consequence analysis instead of a risk analysis would use the same factors as used in a risk analysis, such as casualty area, population density, and predicted consequence for each vehicle response. Proposed Sec. 450.145 (Flight Safety System), in paragraph (a), would require an operator to employ an FSS with design reliability of 0.999 at 95 percent confidence and commensurate design, analysis, and testing if the consequence of any vehicle response mode is 1 x 10-\2\ CEC or greater, consistent with the current FSS requirements in part 417.\54\ If the consequence of any vehicle response mode is between 1 x 10-\2\ and 1 x 10-\3\ CEC, the required design reliability would be relaxed to no lower than 0.975 at 95 percent confidence \55\ with commensurate design, analysis, and testing requirements necessary to support this reliability. If the CEC is less than 1 x 10-\3\, and the individual and collective risk criteria are met, an operator would not be required to have an FSS. The FAA coordinated with NASA and the Department of Defense in the Common Standards Working Group to arrive at this proposal. ---------------------------------------------------------------------------

\54\ Sections 417.303 and 417.309. \55\ In statistics, a confidence interval is the range of values that includes the true value at a specified confidence level. A confidence level of 95% is commonly used which means that there is a 95% chance that the true value is encompassed in the interval. ---------------------------------------------------------------------------

An RCC 319-compliant FSS would only be required for any phase of flight in which the CEC exceeds 1 x 10-\2\. This threshold is consistent with past precedent, FAA waivers, and U.S. Government consensus standards. Other government entities use a consequence threshold of 1 x 10-\2\ to protect against explosive hazards.\56\ This threshold is also rooted in the longstanding and often cited principle that launch and reentry should present no greater risk to the public than that imposed by the over- flight of conventional aircraft. The Air Force, the RCC, and an American National Standard (ANSI/AIAA S-061-1998) 57 58 have identified the public risks posed by conventional aircraft as an important benchmark for the acceptable risks posed by launch vehicles. Like commercial space operations, civil aviation poses an involuntary hazard to the public on the ground. Therefore, the FAA looked to this risk to the public on the ground to derive consequence limits for commercial space activities. The FAA analyzed National Transportation Safety Board (NTSB) aviation accident data and determined that the average consequences on the ground from all fatal civil aviation accidents are 0.06 casualties and 0.02 fatalities. The average ground fatality of an airline crash is 1, and of a general aviation crash is 0.01.\59\ The proposed threshold appears reasonable given this range of aviation related accident consequences. ---------------------------------------------------------------------------

\56\ The Department of Defense, NASA, and the FAA use quantity- distance limits originally designed to limit conditional individual risk of fatality to 1 x 10-\2\ from inert debris fragment impacts. They define minimum separation distances between potential sources of high speed fragments (propelled by accidental explosions) and areas with exposed personnel to ensure no more than one hazardous fragment impact per 600 sqft, with the assumption that any exposed person has a vulnerable area of 6 sqft. NASA only permits inhabited buildings at closer distances if proved sufficient to limit hazardous debris to 1/600 sqft, and thus enforces a consequence limit of no more than 1 x 10-\2\ conditional expected fatalities (NASA-STD-8719.12A--2018-05-23, p. 63). \57\ Waiver of Debris Containment Requirements for Launch. 81 FR 1470 (January 12, 2016), at 1470-1472. \58\ According to ANSI/AIAA S-061-1998, ``during the launch and flight phase of commercial space vehicle operations, the safety risk for the general public should be no more hazardous than that caused by other hazardous human activities (e.g., general aviation over flight).'' \59\ The FAA looked at NTSB data on injuries and fatalities of people on the ground from fatal civil aviation accidents (where an occupant of the aircraft died) for the 30-year period between 1984 and 2013. ---------------------------------------------------------------------------

The FAA proposes a threshold of 1 x 10-\3\ CEC as a metric for determining the need for any FSS. This is an order of magnitude less than the threshold that determines the need for a highly-reliable FSS, and which is scaled to the reliability of the required FSS. Combined with the individual risk and cumulative risk thresholds, the FAA believes that this proposed threshold would ensure public safety. The use of a consequence metric is consistent with the ARC comments. The ARC suggested that an FSS with a reliability of 0.999 at 95 percent confidence is appropriate for high consequence, low probability events and a lower reliability could be acceptable under the right circumstances. The FAA notes that the ARC did not identify any threshold values to define ``high consequence''; however, the proposal does identify specific quantitative consequence thresholds in terms of CEC. The FAA invites comments on this approach in general, as well as the specific thresholds proposed. Lastly, proposed Sec. 450.125 (Gate Analysis), in paragraph (c), would limit the predicted average consequence from flight abort resulting from a failure in any one-second period of flight to 1 x 10-\2\ CEC. Flight abort will be discussed in more detail later in the preamble.

B. System Safety Program

Proposed Sec. 450.103 (System Safety Program) would require an operator to implement and document a system safety program throughout the lifecycle of a launch or reentry system that includes at least the following: (1) Safety organization, including a mission director and safety official; (2) procedures to evaluate the operational lifecycle of the launch or reentry system to maintain current preliminary safety assessments and any flight hazard analyses; (3) configuration management and control; and (4) post-flight data review. Due to the complexity and variety of vehicle concepts and operations, a system safety program would be necessary to ensure that an operator considers and addresses all risks to public safety. Currently, parts 415 and 417 have a more prescriptive philosophy of flight safety hazard mitigation. While the requirements ensure safety, they neither provide the flexibility needed to address the diverse and dynamic nature of today's commercial space transportation industry nor address the unique aspects of non-traditional launch and reentry vehicles. For example, except for unguided suborbital launch vehicles, it is virtually impossible for operations that can reach populated areas but that do not use an FSS to comply with parts 415 and 417. Regulations applicable to reentry and RLVs in part 431 expressly established system safety requirements as a flexible approach to approving a safety process that encompasses design and operation. Section 431.33 sets the requirements for the maintenance and documentation of a safety organization. Specifically, it requires: (1) The identification of lines of communication and approval authority for all mission decisions possibly affecting public safety including internal and external lines of communication with the launch or reentry site to ensure compliance with required plans and procedures; (2) the designation of a person responsible for conducting all licensed RLV mission activities; and (3) designation of a qualified safety official by name, title, and qualifications.

[[Page 15314]]

Section 431.35(c) specifically requires the use of a system safety process to identify hazards and assess the risks to public health and safety and the safety of property and to demonstrate compliance with the acceptable risk criteria.\60\ It also incorporates core components of a hazard analysis. ---------------------------------------------------------------------------

\60\ Section 431.35(c) also fails to provide a detailed description of the composition of a compliant system safety process. This lack of detail has often led to the submission of deficient applications because the applicant failed to demonstrate that the system safety process was adequate to meet public safety requirements and therefore the FAA did not find the application to be complete enough for acceptance. The ARC noted the confusion around the FAA's evaluation of an application's system safety submission and recommended changing the regulation to increase regulatory certainty. ---------------------------------------------------------------------------

Section 431.35(d) requires several deliverables to demonstrate compliance with acceptable risk criteria and a compliant system safety process. Despite the explicit deliverables, the structure of the regulation has proved to be confusing for applicants. For instance, some system safety analysis element requirements are intermixed with vehicle design element requirements. Similarly, general information requirements such as the identification of hazardous material can be found listed with unrelated requirements such as the description of the RLV. The inclusion of these elements in the section governing system safety has led applicants to produce application deliverables that were scattered and not easily understood by the FAA. Also, some less experienced applicants did not understand that the regulation required a system safety analysis and provided general information and an informal assessment of how that general information may have affected public safety. The ARC made specific suggestions on the role of system safety in the FAA's safety regulatory scheme. It recommended the FAA use a system safety process at the core of its safety requirements to identify hazards and develop hazard control strategies that are verified by means of an FSA, relevant operational constraints, and means of meeting those constraints. It noted the FAA could provide better detail on its safety requirements. For instance, Sec. 431.35(c) could be expanded to include risk-informed decision making and continuous risk management requirements. It further suggested the FAA incorporate varying levels of rigor that would scale required verification requirements, like test plans and performance results, by vehicle, operator category, and relative risk as a means of scoping requirements to vehicle hazards and potential population exposure. The FAA agrees that the system safety process should form the core of its safety requirements as a means of making the safety requirements more flexible for novel operations and processes. Proposed Sec. 450.103 lists the minimum components all operators would be required to have in their system safety programs to protect public health and safety and the safety of property. Part 431 established a process-based requirement for a system safety program but did not define its components or a safety standard. This lack of definition has led to many operators establishing system safety programs that are missing components necessary for public safety. This lengthened some applicants' pre-application consultation and the license application evaluation process. The FAA intends to further define the system safety program to lessen the potential for misunderstandings between applicants and the FAA. This proposal should allow potential operators to design system safety programs that better address public safety concerns prior to license application submittal. 1. Safety Organization Proposed Sec. 450.103(a) would require an operator to maintain and document a safety organization with clearly defined lines of communication and approval authority for all public safety decisions. This safety organization would include at least two positions, referred to as a mission director and a safety official. The mission director would be responsible for the safe conduct of all licensed activities and authorized to provide final approval to proceed with licensed activities. The safety official \61\ would be required to communicate potential safety and non-compliance matters to the mission director during flight and ground operations. The safety official would also be authorized to examine all aspects of an operator's ground safety and flight safety operations. It is common practice in any safety organization, including those within the commercial space industry, to establish who will be responsible for ensuring safety and to have clear processes for communicating safety concerns effectively throughout the organization. ---------------------------------------------------------------------------

\61\ In 1999, the FAA added the requirement for a safety official possessing authority to examine launch safety operations and to monitor independently personnel compliance with safety policies and procedures. The FAA stated in the preamble to the final rule that the person responsible for safety should have the ability to perform independently of those parts of the applicant's organization responsible for mission assurance. 64 FR 19604 (April 21, 1999). ---------------------------------------------------------------------------

This proposal would allow for one person, or several, to perform the safety official's functions. Unlike current regulations, an operator would not have to name a specific safety official in its license application. Instead, an operator would be required to designate a position to accomplish the necessary tasks of a safety official. The FAA seeks comment on this approach, and whether it provides an appropriate level of flexibility to industry. Many operators have complained about the burden of naming a specific safety official in a license application. One challenge is that, in many cases, an operator applies for a license before selecting a safety official. As such, many operators must submit a modification of their application once they have chosen a safety official. Another issue is that operators that conduct activities at a frequent rate must employ several persons that serve as safety officials to keep pace with their operations. These persons may serve as safety officials on several different types of operations on multiple licenses. Therefore, the operator must frequently submit license application modifications every time it selects a new person to serve in that capacity. An operator is further burdened when safety officials leave the launch operator's organization or assume a new role within the organization that would prohibit them from serving as a safety official. The FAA believes a safety organization that includes a safety official is essential to public safety; however, identifying that individual by name is not necessary. Under the proposal, the operator would still be required to designate a safety official for any licensed activity prior to the start of that activity. The FAA has previously noted that licensed ground operations have commenced without designating a safety official. Many applicants mistakenly assumed the safety official was only necessary for flight operations. These operators conducted preflight ground operations in advance of flight without a safety official monitoring the operation. This proposal would require a safety official for all licensed operations to independently monitor licensed activity to ensure compliance with the operator's safety policies. Additionally, the safety official would report directly to the mission director. The absence of a safety official could result in a lack of independent safety oversight and a potential for a break down in communications of important safety-related information. The FAA would continue to inspect licensed operations

[[Page 15315]]

to ensure that a safety official is in place throughout the course of the licensed activity. 2. Procedures Proposed Sec. 450.103(b) would require that an operator establish procedures to evaluate hazards throughout the complete operational lifecycle of a program. This is important because design and operational changes to a system can have an impact on public safety. This proposed requirement was implied in Sec. 431.35(c) but was not explicitly stated. Specifically, Sec. 450.103(b) would require the operator to implement a process to update the preliminary safety assessment and any flight hazard analysis to reflect the knowledge gained during the lifecycle of the system. To accomplish this, an operator would be required to establish methods to review and assess the validity of the preliminary safety assessment and any flight hazard analysis throughout the operational lifecycle of the launch or reentry system. An operator would also need to have methods for updating the assessment or analysis, and to communicate the updates throughout its organization. For any flight hazard analysis, an operator would also have to have a process for tracking hazards, risks, mitigation and hazard control measures, and verification activities. 3. Configuration Management and Control Proposed Sec. 450.103(c) would lay out configuration management and control requirements. The FAA has chosen to consolidate configuration management and control requirements within the system safety program requirements. Requirements addressing configuration control were previously scattered throughout the regulations, including in Sec. Sec. 417.111(e), 417.123(e)(2), 417.303(e), and 417.407(c). Operators frequently make changes to their vehicles, such as new manufacturing techniques for a component or changes to the materials on key structures. Operators may also make operational changes such as new analysis techniques, automating processes that were previously conducted by personnel, or changing the surveillance techniques in hazard areas. These types of changes can have significant impacts on public safety. This proposal would require an operator to track configurations of all safety-critical systems and documentation, ensure the correct and appropriate versions of the systems and documentation are used, and maintain records of system configurations and versions used for each licensed activity. The FAA expects that an operator would design configuration management and control into its operations. The FAA also expects that an operator would provide the capability to both alert responsible individuals when key documentation must be updated and ensure that all stakeholders--internal and external to the launch operator's organization--are using current and accurate information. 4. Post-Flight Data Review Proposed Sec. 450.103(d) would require that an applicant conduct a post-flight data review. The proposed requirements in Sec. 450.103(d) are not explicitly contained in part 415, 417 or 431. However, it is industry practice to review post-flight data to address vehicle reliability and mission success, so any added burden from proposed Sec. 450.103(d) would be minimal. Operator review of post-flight data provides valuable safety information on future operations, particularly the identification of anomalies. At a minimum, proposed Sec. 450.103(d)(1) would require that an operator employ a process for evaluating post-flight data to ensure consistency between the assumptions used for the preliminary safety assessment, any flight hazard or flight safety analysis, and associated mitigation and hazard control measures. Proposed Sec. 450.103(d)(2) would require that an operator resolve any inconsistencies identified in proposed Sec. 450.103(d)(1) prior to the next flight of the vehicle. The FAA expects that the operator would address any inconsistencies by updating analyses using the best available data for the upcoming mission, or documenting the rationale explaining how changes to the data inputs would not have an impact on the results of the analysis for a proposed mission. The FAA would add this requirement to ensure that the operator makes all appropriate updates to the analysis identifying all public safety impacts in order to avoid inconsistencies in future missions that could jeopardize public safety. Proposed Sec. 450.103(d)(3) would require that an operator identify any anomaly that may impact the flight hazard analysis, flight safety analysis, safety critical system, or is otherwise material to public safety and safety of property. An examination and understanding of launch or reentry vehicle system and subsystem anomalies throughout the lifecycle of the vehicle system can alert an operator of an impending mishap. An operator should review post-flight data to identify unexpected issues or critical systems that are operating outside of predicted limits. Flight safety systems are examples of safety-critical systems that could jeopardize public safety if they do not perform nominally. Proposed Sec. 450.103(d)(4) would require an operator to address any anomaly identified in proposed Sec. 450.103(d)(3). Prior to the next flight, an operator would be required to address each anomaly by, at a minimum, updating any flight hazard analysis, flight safety analysis, or safety critical system. The FAA seeks comment on whether proposed Sec. 450.103(d) would change an operator's approach to reviewing post-flight data. 5. Application Requirements Proposed Sec. 450.103(e) would set the system safety program application requirements. An applicant would be required to provide a summary of how it plans to satisfy the system safety program requirements. It is currently common practice for applicants to provide the FAA with a system safety program plan or documents containing the necessary information to determine compliance with the system safety program requirements in Sec. 431.35(c). A system safety program plan that covers the elements in Sec. 450.103(e) would satisfy the proposed application requirements. The FAA also recommends an applicant consult with the FAA during the development of its system safety program prior to implementation. With respect to the safety organization, an applicant would be required to describe the applicant's safety organization, identifying the applicant's lines of communication and approval authority, both internally and externally, for all public safety decisions and the provision of public safety services. In the past, many applicants have chosen to provide an organization chart depicting the safety organization. The FAA encourages the continuation of this practice. However, the applicant would be required to provide a sufficient narrative describing the organization, particularly the lines of communication. For example, if an engineer in the safety organization becomes aware of a hazard, the applicant should describe how that engineer would communicate that hazard to the safety official. An applicant would also be required to provide a summary of the processes and products identified in the system safety program requirements. The FAA expects that processes would be scalable based on the size of the operation or the potential public safety impacts of the proposed operation. For example, an

[[Page 15316]]

applicant with a dozen employees and a relatively small launch or reentry vehicle may use meetings or less formal ways to develop its preliminary hazard list. However, an applicant with a larger vehicle operating from multiple sites and hundreds of employees would need a more formal means of tracking information and developing the required analyses.

C. Preliminary Safety Assessment for Flight

Under proposed Sec. 450.105 (Preliminary Safety Assessment for Flight), every operator would be required to conduct and document a preliminary safety assessment (PSA) for the flight of a launch or reentry vehicle. The PSA would identify operation-specific information relevant to public safety and would help the operator scope the analyses that must be conducted to ensure that the operation satisfies the public safety criteria in proposed Sec. 450.101. An operator could use the knowledge obtained from the PSA to identify the effect of design and operational decisions on public safety and thus determine potential hazard control strategies. The products of the PSA are consistent with products that are currently produced for preliminary flight safety analyses and preliminary system safety analyses. The PSA will allow operators to quickly identify and demonstrate the hazard control strategy appropriate for their proposed operation. The FAA intends the PSA to be a top-level assessment of the potential public safety impacts identifiable early in the design process. This assessment should be broad enough that minor changes in vehicle design or operations would not have a significant impact on, or invalidate the products produced by, the PSA. At the same time, the PSA should be detailed enough to identify the public safety and hazard control implications associated with key design trade studies. The FAA recommends that an operator perform an initial PSA at the outset of the design phase of a proposed operation. Thereafter, the operator should update the assessment as needed in accordance with the launch operator's established procedures to evaluate the complete operational lifecycle of a launch or reentry system. The results of the PSA would provide the operator with an appropriate hazard control strategy for its proposed operation.\62\ ---------------------------------------------------------------------------

\62\ As mentioned previously and discussed in greater detail in the next section, traditional hazard controls include physical containment, wind weighting, or flight abort. ---------------------------------------------------------------------------

Under proposed Sec. 450.105(a), an acceptable PSA would identify at least the following key elements: (1) The vehicle response modes; (2) the types of hazards associated with the vehicle response modes; (3) the geographical area where the public may be exposed to a hazard; (4) the population of the public exposed to the hazard; (5) the CEC; (6) a preliminary hazard list which documents all causes of vehicle response modes that, excluding mitigation, have the capability to create a hazard to the public; (7) safety-critical systems; and (8) the timeline identifying all safety critical events. The FAA expects that an operator would use many of these PSA elements in subsequent analyses. For instance, population data, vehicle response modes, and the associated effects are part of a valid quantitative risk analysis. These items could also be useful for a flight hazard analysis. A vehicle response mode is a mutually exclusive scenario that characterizes foreseeable combinations of vehicle trajectory and debris generation. Examples include on-trajectory explosion, on-trajectory loss of thrust, and tumble turns. The types of hazards associated with any vehicle response mode can include inert and explosive debris, overpressure, and toxics. By understanding the potential vehicle response modes and the hazards associated with those vehicle response modes, an operator can then determine the geographical areas where the public may be exposed to a hazard. This information, along with the population of the public exposed to the hazard, would allow an operator to begin to characterize the potential risk during any particular phase of flight. Calculating CEC as discussed earlier, is important to understand the need for an FSS and its required reliability. All of these elements, which comprise Sec. 450.105(a)(1) through (5), are important to develop hazard control strategies. Proposed Sec. 450.105(a)(6) would require an operator to produce a preliminary hazard list. The operator would be required to review the operation to determine what hazards exist in order to generate the preliminary hazard list. This assessment is different from the quantitative risk analysis and is meant to give an operator an understanding of how public safety is affected at the subsystem or component level of the operation. An operator should use common system safety tools such as Fault Trees, Failure Modes and Effects Analyses (FMEA), safety panels, and engineering judgement to develop the preliminary hazard list. An operator should describe hazards in terms that identify each potential source of harm, the mechanism by which the harm may be caused, and the potential outcome if the harm were to remain unaddressed.\63\ The operator should ensure that the hazard is described in enough detail so that the safety critical personnel within the operator's organization would be able to review the hazard and easily ascertain the source, mechanism, and the public safety-related outcome of the hazard. In developing the preliminary hazard list, an operator would not be required to assess the risk associated with each hazard or potential mitigation measures. These items would be determined in the flight hazard analysis, if required, as discussed in the ``Flight Hazard Analysis'' section of this preamble. ---------------------------------------------------------------------------

\63\ For example, a potential source of harm could be a leak in a rocket engine fuel system line caused by a manufacturing defect, overpressure, or improper installation. The mechanism for harm could be a fire resulting from that leak. The outcome could be loss of the vehicle with impact on population. ---------------------------------------------------------------------------

When developing the preliminary hazard list, the operator would also be required to address items that are not specific to the vehicle hardware but necessary for the launch or reentry system. These items would include things like human factors, training, and other operational concerns. The FAA believes the preliminary hazard list is critical as the regulatory approach changes from narrowly prescribed methods to performance-based standards that focus on the applicant demonstrating safety through system safety management and engineering. As the industry moves toward to a more performance-based regime, there is a growing need for operators to produce the analyses specific to their unique operations in order to ensure public safety and detail the appropriate hazard mitigation strategies for their proposed operation. Additionally, an operator that makes changes to its operation could potentially move from a regulatory pathway that does not require a hazard analysis to one that does. The existence of a preliminary hazard list should alleviate some of the existing burdens on operators by requiring only those analyses necessary to ensure the safety of a particular operation. It would also more quickly facilitate analyses demonstrating public safety, thus creating the potential for operational changes closer to flight of the vehicle. For example, consider an operation where a flight hazard analysis

[[Page 15317]]

was unnecessary because of the use of an FSS under proposed Sec. 450.145(a)(1). In that case, a change in FSS design, testing or qualification, or disabling the abort system during some phases of flight, could result in the need for a flight hazard analysis. Because the operator would be required to generate a preliminary hazard list, it would already have the initial step of the flight hazard analysis completed, excluding any impacts of the change. The operator would then be required to complete the final steps of the hazard analysis to complete its safety documentation. Proposed Sec. 450.105(a)(7) would require an operator to identify safety-critical systems. A safety critical system would be a system that is essential to safe performance or operation. A safety-critical system, subsystem, component, condition, event, operation, process, or item, is one whose proper recognition, control, performance, or tolerance, is essential to ensuring public safety. It is important for an operator to clearly identify safety critical systems because many requirements in proposed part 450 relate to these systems. Proposed Sec. 450.105(a)(8) would require an operator to identify a timeline identifying all safety critical events. This timeline is important to identify the potential public safety consequences during any particular phase of flight. Proposed Sec. 450.105(b) would set the PSA application requirements. The applicant would be required to provide the results of the preliminary safety assessment in its application. The applicant would be required to provide information for every requirement listed under Sec. 450.105(a). These application requirements are consistent with those currently in part 431. Although these specific system safety requirements would be new for ELV operators, the FAA does not expect they would add a substantial burden given that part 417 operators were performing similar work, albeit not under the system management umbrella. ELV operators must already identify vehicle failure modes; debris, toxics, distant-focusing overpressure, and other hazards; geographical containment and overflight trajectories; consequences that determine flight limits; and all safety critical systems and events. The PSA codifies these concerns as primary to safety and the development of hazard control strategies and requires all vehicle operators to document such considerations. Development of the PSA would allow the operator to determine whether they must perform a flight hazard analysis. The operator would be required to assess each phase of flight to determine how public safety hazards are mitigated. If there is a phase of flight where all identified public safety hazards are not mitigated using physical containment, wind weighting, or flight abort, the operator would be required to perform a flight hazard analysis, discussed later in this preamble, for that particular phase of flight.

D. Hazard Control Strategy

Proposed Sec. 450.107 (Hazard Control Strategies) would provide options for hazard control strategies that an operator could use to meet the public safety criteria in proposed Sec. 450.101 for each phase of a launch or reentry vehicle's flight. An operator could use physical containment, wind weighting, or flight abort and would not be required to conduct a flight hazard analysis. Alternatively, an operator could conduct a flight hazard analysis to derive hazard controls. As part of its application, an operator would be required to identify the selected hazard control strategy for each phase of flight. The use of a flight hazard analysis to derive hazard controls provides the most flexibility of any of the hazard control strategies. The ARC recommended this approach and stated that the system safety process should be used to identify hazards and develop control strategies, which would then be verified by means of flight safety analysis and relevant operational constraints and means of meeting those constraints.\64\ In certain circumstances, however, historical methods may also provide an acceptable level of safety. If the public safety hazards identified in the preliminary safety assessment can be mitigated adequately to meet the public safety requirements of proposed Sec. 450.101 using physical containment, wind weighting, or flight abort with a highly reliable FSS, an operator would not need to conduct a flight hazard analysis for that phase of flight. This proposal is different than current regulations, where the option of conducting a hazard analysis to derive hazard controls is only available to reusable launch vehicles. Under proposed part 450, the option to use a flight hazard analysis would not rest on whether a vehicle is expendable or reusable. ---------------------------------------------------------------------------

\64\ ARC Report at p. 10. ---------------------------------------------------------------------------

Under proposed Sec. 450.107(b), an operator could use physical containment to satisfy the public safety requirements of proposed Sec. 450.101 when an operator's launch vehicle does not have sufficient energy for any hazards associated with its flight to reach an area where it exposes the public or critical assets to a hazard. These launches can take place from any launch site, depending on the size of the launch vehicle, the expected trajectory, and other factors. The more remote a launch site is, the greater its capacity to accommodate a launch using physical containment. This approach is consistent with current practice because the FAA has always accepted a demonstration of physical containment as a means of satisfying risk requirements. The use of physical containment as a hazard control strategy is the easiest way to meet the public safety requirements of proposed Sec. 450.101 and may, in a remote location, involve a simple showing that the maximum distance vehicle hazards can reach defines an area that is unpopulated and does not contain any critical assets. Because physical containment precludes the need for an FSS, an operator would not be required to meet any requirements relevant to an FSS. If an operator shows its vehicle does not have sufficient energy for any of its associated hazards to reach outside the flight hazard area, the operator would not have to perform a flight hazard analysis. Further, many other requirements would be either not applicable or easily met. Because physical containment may also involve visitor control, wind constraints, real-time toxic analysis, and other mitigation measures, the FAA would require an operator to apply other mitigation measures to ensure no public exposure to hazards, as agreed to by the Administrator on a case-by-case basis. Under proposed Sec. 450.107(c), an operator could use wind weighting to satisfy the public safety requirements of proposed Sec. 450.101 when an operator uses launcher elevation and azimuth settings to correct for wind effects that an unguided suborbital launch vehicle, typically called a sounding rocket, would experience during flight. Due to its relative simplicity and effectiveness, wind weighting has historically been used by NASA, the Department of Defense, and commercial operators as the primary method to ensure public safety for the launch of a sounding rocket. This approach is currently codified in part 417. Under part 431, an operator can use wind weighting as an acceptable hazard mitigation measure determined through the system safety process. Under proposed part 450, an operator launching a sounding rocket could use wind weighting or it could propose other hazard controls in its application through a flight hazard analysis. The specific wind weighting requirements are discussed in the

[[Page 15318]]

``Additional Technical Justification and Rationale'' section. Under proposed Sec. 450.107(d), an operator could use flight abort to satisfy the public safety requirements of proposed Sec. 450.101 when an operator limits or restricts the hazards to the public or critical assets presented by a launch vehicle or reentry vehicle, including any payload, while in flight by initiating and accomplishing a controlled ending to vehicle flight, when necessary. This is discussed in more detail in the ``Flight Abort'' section. If the public safety hazards identified in the preliminary safety assessment cannot be mitigated adequately to meet the public risk criteria of proposed Sec. 450.101 using physical containment, wind weighting, or flight abort, an operator would be required to conduct a flight hazard analysis in accordance with proposed Sec. 450.109 (Flight Hazard Analysis) to derive hazard controls for that phase of flight. The use of a flight hazard analysis to derive hazard controls is the primary approach used in current parts 431, 435, and 437. The FAA has previously required the use of a flight hazard analysis for reentry, for the captive carry portion of an air-launched vehicle, and for piloted suborbital vehicles. A detailed discussion of flight hazard analysis is included later in this preamble. In its application, an applicant would be required to describe its hazard control strategy for each phase of flight. An applicant may elect to use different hazard control strategies for different phases of flight, depending on risks associated with those phases. For example, an applicant using an air-launched system might use a flight hazard analysis during the captive carry phase of flight, and flight abort during the rocket-powered phase of flight. Additionally, if using physical containment as a hazard control strategy, an applicant would be required to demonstrate that the launch vehicle does not have sufficient energy for any hazards associated with its flight to reach outside the flight hazard area. The applicant would also be required to describe the methods used to ensure that flight hazard areas are cleared of the public and critical assets.

E. Flight Abort

As discussed earlier, flight abort is a hazard control strategy to limit or restrict the hazards to the public or critical assets presented by a launch vehicle or reentry vehicle, including any payload, while in flight. Flight abort is a controlled ending to vehicle flight and is initiated by an operator when ending flight poses less risk to public safety and the safety of property than continued flight without a safety intervention. Flight abort is the primary hazard control strategy used today for orbital expendable launch vehicles under part 417, and under Air Force and NASA launch range requirements. The FAA proposes to require this approach, with a reliable FSS, only when certain conditional risks are present. Specifically, proposed Sec. 450.101(c) would require an operator to use flight abort with an FSS that meets the requirements of Sec. 450.145 as a hazard control strategy if the consequence of any reasonably foreseeable vehicle response mode, in any one-second period of flight, is greater than 1 x 10-3 conditional expected casualties for uncontrolled areas.\65\ The basis for this number is discussed in the ``Consequence Protection Criteria for Flight Abort and Flight Safety System'' section. Under this test, a typical orbital launch from the Air Force Eastern and Western ranges would require an FSS capable of initiating flight abort. Small orbital launch vehicles launched from more remote locations, however, would not normally be required to use flight abort as a hazard control strategy. The FAA seeks comment on this approach. ---------------------------------------------------------------------------

\65\ The proposed requirement to use flight abort as a hazard control strategy is less restrictive than Sec. 417.107(a), which requires a launch operator to use an FSS in the vicinity of the launch site if any hazard from a launch vehicle, vehicle component, or payload can reach any protected area at any time during flight, or if a failure of the launch vehicle would have a high consequence to the public. ---------------------------------------------------------------------------

To implement flight abort as a hazard control strategy, an operator would establish flight safety limits and gates in accordance with proposed Sec. Sec. 450.123 (Flight Safety Limits Analysis) and 450.125, establish flight abort rules in accordance with Sec. 450.165 (Flight Safety Rules), and employ an FSS in accordance with Sec. 450.145 and software in accordance with Sec. 450.111. Flight abort as a hazard control strategy can be used by an operator, even if it is not required under Sec. 450.101(c), as a hazard mitigation measure derived from the flight hazard analysis. For example, a piloted vehicle with low conditional expected casualty during powered flight may use an FSS in combination with other measures, such as propellant dumping, to keep vehicle hazards from reaching a populated area. 1. Flight Safety Limits and Uncontrolled Areas An operator would have to identify the location of uncontrolled areas and establish flight safety limits that define when an operator must initiate flight abort to: Prevent debris capable of causing a casualty from impacting in uncontrolled areas if the vehicle is outside the limits of a useful mission, and Ensure compliance with the public safety criteria of Sec. 450.101. The FAA would define debris capable of causing a casualty with kinetic energy or other thresholds as will be discussed later. The public safety criteria that would go into determining flight safety limits would be collective risk, individual risk, risk to critical assets, and conditional risk. An uncontrolled area would be an area of land not controlled by a launch or reentry operator, a launch or reentry site operator, an adjacent site operator, or other entity by agreement. Under current regulations, these areas are referred to as ``protected areas.'' Importantly, as discussed earlier, the conditional risk criteria would not apply to controlled areas, which are areas that are controlled by any of the entities listed earlier, because by exercising control over these areas the entity would have a greater ability to ensure that catastrophic risk is mitigated by other means. In addition to establishing flight safety limits, an operator would establish gates, if the vehicle would need to overfly a landmass during its flight. A gate is an opening in a flight safety limit through which a vehicle may fly, provided the vehicle meets certain pre-defined conditions such that the vehicle performance indicates an ability to continue safe flight. If the vehicle fails to meet the required conditions to pass a gate, then flight abort would occur at the flight safety limit. In other words, the gate would be closed. Flight safety limits and gates are discussed in greater detail later in this preamble. 2. Flight Abort Rules An operator would identify the conditions under which the FSS, including the functions of any flight abort crew, must abort the flight to ensure compliance with Sec. 450.101. An operator would be required to abort a flight if a flight safety limit is violated, or if some condition exists that could lead to a violation, such as a compromised FSS or loss of data. Flight abort rules are discussed in greater detail later in this preamble. 3. Flight Safety System To enable flight abort, an operator must use an FSS. An FSS is an integral

[[Page 15319]]

part of positive control of a launch or reentry vehicle because it allows an operator to destroy the vehicle, terminate thrust, or otherwise achieve flight abort to limit or restrict the hazards to public health and safety and the safety of property presented by a vehicle while in flight. Traditional FSSs are comprised of an onboard flight termination system, a ground-based command and control system, and tracking and telemetry systems. Historically, the flight safety crew monitoring the course of a vehicle would send a command to the vehicle to terminate flight if the vehicle violated a flight abort rule. Recently, operators are favoring autonomous FSSs, negating the need for a ground-based command and control system or flight abort crew. As discussed earlier, the CEC would establish whether an FSS is required, and if so, its reliability. If the consequence of any vehicle response mode is 1 x 10-2 conditional expected casualties or greater for uncontrolled areas, an operator would be required to employ an FSS with design reliability of 0.999 at 95 percent confidence and commensurate design, analysis, and testing; or If the consequence of any vehicle response mode is between 1 x 10-2 and 1 x 10-3, an operator would be required to employ an FSS with a design reliability of 0.975 at 95 percent confidence and commensurate design, analysis, and testing. Note that if the consequence of any vehicle response mode is less than 1 x 10-3, the FAA would not require an FSS or mandate its reliability if an operator chooses to use one. Unlike part 417, the FAA would not propose specific design or testing requirements for an FSS. Instead, the FAA would accept specified government or industry standards as meeting the FSS reliability requirements. At this time, only one government standard would meet the requirement for a design reliability of 0.999 at 95 percent confidence and commensurate design, analysis, and testing, and that is RCC 319.\66\ ---------------------------------------------------------------------------

\66\ RCC 319 can be found at http://www.wsmr.army.mil/RCCsite/Documents/319-14_Flight_Termination_Systems_Commonality_Standard/RCC_319-14_FTS_Commonality.pdf. ---------------------------------------------------------------------------

The FSS requirements codified in part 417, including component performance requirements and acceptance and qualification testing, were originally written to align FAA launch licensing requirements with the Federal launch range standards in RCC 319. Like part 417, RCC 319 requires qualification tests to demonstrate reliable operation in environments exceeding the expected operating environment for the system components, acceptance tests to demonstrate that the selected batch of components meets the requirements of the design specifications, and other preflight testing at the system or subsystem level to demonstrate functionality after installation. In the short term, the FAA expects individual applicants to create their own FSS requirements based on RCC 319 and have them approved as an accepted means of compliance by the FAA prior to application submittal. This would be akin to ``tailoring'' RCC 319, which is current practice at the Federal launch ranges. In the long run, the FAA expects the industry to develop voluntary consensus standards for FSSs, particularly for those FSSs that are only required to have a design reliability of 0.975 at 95 percent confidence. By removing detailed design and testing requirements from FAA regulations and relying on standards to meet reliability thresholds, the FAA would encourage innovation in flight abort. The FAA seeks comment on whether this approach would encourage innovation and more rapid evolution of FSS designs.

F. Flight Hazard Analysis

Proposed Sec. 450.109 would require that an operator conduct and document a flight hazard analysis and continue to maintain the flight hazard analysis throughout the lifecycle of the launch or reentry system unless an operator uses proven hazard control strategies such as physical containment, wind weighting, or flight abort. At its most basic, a flight hazard analysis identifies all reasonably foreseeable hazards and the necessary measures to eliminate or mitigate that risk. A flight hazard analysis would be required only for those phases of flight for which the operator does not employ a traditional hazard control (e.g., physical containment). As noted earlier, the use of a flight hazard analysis to derive hazard controls would provide flexibility that does not currently exist under the prescriptive requirements in part 417 \67\ and is broadly consistent with the practice in parts 431 and 435.\68\ ---------------------------------------------------------------------------

\67\ The current ELV regulatory scheme in parts 415 and 417 mitigates flight hazards for all launches by requiring a reliable FSS and prescriptive flight abort requirements. \68\ Current RLV and reentry vehicle regulations in parts 431 and 435 do not specifically require a flight hazard analysis. However, Sec. 431.35(c) and (d) require a system safety process to identify hazards, assess the risks, and the elimination or mitigation of the risk. In practice, the FAA has interpreted this broad section to require a flight hazard analysis. ---------------------------------------------------------------------------

Proposed Sec. 450.109(a) would require that an operator further refine the flight hazard list developed during the earlier PSA, including verifying the list of items identified in Sec. 450.109 and any new hazards identified since completing the PSA. A hazard is a real or potential condition that could lead to an unplanned event or series of events resulting in death, serious injury, or damage to or loss of equipment or property. The list of items in proposed Sec. 450.109(a)(1) is a list of hazard categories that exist in all commercial space operations and must therefore be eliminated or mitigated to acceptable levels. After identifying and describing hazards, proposed Sec. 450.109(a)(2) would require that an operator assess each hazard's likelihood and severity. This assessment would be used to establish mitigation priorities. The operator would then determine the severity of the specific potential hazardous condition with respect to public safety. An operator should determine the severity for a specific hazard by identifying the worst credible event that may result from the hazard. For example, if an operator identifies a hazard such as incorrect vehicle position data due to inertial measurement unit (IMU) drift leading to an off nominal trajectory, the operator would determine the public impact using the greatest off nominal vehicle trajectory and the worst credible public safety outcome. Meaning, if the vehicle would break up aerodynamically due to an off nominal trajectory caused by IMU drift, the operator should base its severity assessment on the debris event generated by the break up taking into account the population in the area. If the vehicle operates in a remote area the severity may be low; however, if the operation occurs within the reach of the population, the severity would be catastrophic. After severity and likelihood are assessed, proposed Sec. 450.109(a)(3) would require that an operator ensure that any hazard that may cause a casualty is extremely remote, and any hazard that can cause major damage to public property or critical assets is remote. If a particular hazard source has been observed in a similar operation under similar conditions, it will be difficult to justify that the likelihood of the reoccurrence of the event will qualify as remote or extremely remote. This requirement is substantively the same as current practice under Sec. 431.35(c) and is specifically called out in Sec. 437.55(a)(3) for experimental permits. Examples of suggested likelihood categories for remote and extremely remote are provided in FAA's Advisory Circular (AC) 437.55-1

[[Page 15320]]

``Hazard Analyses for the Launch or Reentry of a Reusable Suborbital Rocket Under an Experimental Permit'' as 1 x 10-5 and 1 x 10-6, respectively. The operator would then need to identify and describe risk elimination and mitigation measures as required by proposed Sec. 450.109(a)(4). The operator should always consider whether the risk mitigation measures introduce new hazards. This proposed section codifies current practice under the Sec. 431.35(c) broad system safety analysis requirement. Although not required, system safety standards and advisory material such as MIL-STD-882E, AC 437.55-1, and AC 431.35- 2A ``Reusable Launch and Reentry Vehicle System Safety Process'' recommend that operators develop risk elimination or mitigation approaches in the following order: 1. Design for minimum risk. The first priority should be to eliminate hazards through appropriate design or operational choices.\69\ If an operator cannot eliminate a risk, it should minimize it through design or operational choices. ---------------------------------------------------------------------------

\69\ An example of designing out risk to the public would be to operate in an unpopulated area. ---------------------------------------------------------------------------

2. Incorporate safety devices. If an operator cannot eliminate hazards through design or operation selection, then an operator should reduce risks through the use of active or passive safety devices.\70\ ---------------------------------------------------------------------------

\70\ An example of an active safety device would be a computing system that automatically shuts down the rocket engine when a sensor detects high thrust chamber temperatures. A passive safety device might be a firewall to prevent a fire from reaching a pilot. ---------------------------------------------------------------------------

3. Provide warning devices. When neither design nor safety devices can eliminate or adequately reduce identified risks, the operator should use a device to detect and warn of the hazardous condition to minimize the likelihood of inappropriate human reaction and response.\71\ ---------------------------------------------------------------------------

\71\ An example of a warning device would be an abort indicator such as a flashing light or a message on a cockpit instrument panel. ---------------------------------------------------------------------------

4. Implement procedures and training. When it is impractical to eliminate risks through design or safety and warning devices, the operator should develop and implement procedures and training that mitigate the risks.\72\ ---------------------------------------------------------------------------

\72\ An example of risk mitigation procedures and training are abort procedures and rehearsals of those procedures. ---------------------------------------------------------------------------

Proposed Sec. 450.109(a)(5) would require that the risk elimination and mitigation measures achieve the proposed risk levels in Sec. 450.109(a)(3) through verification and validation. Verification ensures the measures themselves are properly developed and implemented while validation ensures the measures will actually achieve the desired outcome. Verification takes place while developing the measures and validation after development and implementation. This requirement is substantively the same as current practice under Sec. 431.35(c). The acceptable methods of verifying safety measures are: 1. Analysis: Technical or mathematical evaluation, mathematical models, simulations, algorithms, and circuit diagrams. 2. Test: Actual operation to evaluate performance of system elements during ambient conditions or in operational environments at or above expected levels. These tests include functional tests and environmental tests. 3. Demonstration: Actual operation of the system or subsystem under specified scenarios, often used to verify reliability, transportability, maintainability, serviceability, and human engineering factors. 4. Inspection: Examination of hardware, software, or documentation to verify compliance of the feature with predetermined criteria. An operator could use methods separately or combine them depending on the feasibility of the methods and the maturity of the vehicle and operation. Proposed Sec. 450.109(b) would require that an applicant establish and document the criteria and techniques for identifying new hazards throughout the launch or reentry system lifecycle. Development, implementation, and continued operation of any system requires that changes be made throughout the lifecycle. Changes to the vehicle, especially to safety-critical systems and operations, can have significant impacts on public safety and will result in changes to the hazard analysis. Anomalies and failures can also identify unknown hazards. This requirement is substantively the same as the FAA's current practice under Sec. 431.35(c). Parts 415 and 417 do not have a flight hazard analysis requirement. Proposed Sec. 450.109(c) would require that the flight hazard analysis be updated and complete for every launch or reentry. In other words, the analysis must be applicable to the specific mission. A hazard analysis for a previous mission may be used only if the vehicle and operational details of the mission do not impact the validity of any aspect of the hazard analysis. The FAA has not prescribed the methodology that an operator must follow to ensure the accuracy of a flight hazard analyses. However, this item is key to ensuring that the operator is aware of the hazards in the proposed operation. Proposed Sec. 450.109(d) requires that an operator continually update the flight hazard analysis throughout the operational lifecycle of the launch or reentry system. This requirement is substantively the same as current FAA practice under Sec. 431.35(c). Proposed Sec. 450.109(e) establishes the flight hazard analysis application requirements. An applicant would be required to submit a flight hazard analysis in its application to provide the FAA with sufficient detail to evaluate the applicant's flight hazard analyses and its criteria and techniques for identifying new hazards throughout the lifecycle of the launch or reentry system. The FAA recommends that the applicant provide at a minimum a hazard table that provides a description of each hazard identified, associated severity and likelihood of each hazard, the mitigation measures identified for each hazard, and a summary of the validation and verification of each hazard. For hazards that require mitigation, the applicant would also be required to provide the data showing the verification of those mitigations measures. The FAA expects the results of any testing or analysis associated with the verification to be in a format that is easily understood by an experienced technical evaluator. For items verified by analysis, the applicant should provide the assumptions and methodology used to conduct the analyses if it is not easily understood by evaluating the results. These application requirements would not require more than the current practices under Sec. 431.35(c) and (d).

G. Computing Systems and Software Overview

The FAA is proposing to address hazards associated with computing systems and software separate from flight hazard analysis. The FAA would consolidate all software safety requirements applicable to launch or reentry operations in a single section, in proposed Sec. 450.111 (Computing Systems and Software).\73\ These proposed regulations address both software and how the software operates on the intended hardware and computing systems.\74\ While the FAA discusses

[[Page 15321]]

hardware requirements elsewhere under the safety-critical systems requirements, it is important to recognize that software safety cannot be evaluated outside of the computing system in which it operates.\75\ A computing system is a complete system made up of the central processing unit, memory, related electronics, and peripheral devices. ---------------------------------------------------------------------------

\73\ For the purpose of this discussion, the phrase ``software safety requirements'' refers to software safety regulations and ``software requirements'' refers to the specifications that define a software component's intended functionality. \74\ The FAA understands software to mean a combination of computer instructions and computer data that enables a computer to perform computational and control functions. \75\ Hardware is the collection of physical parts of a computer system, including memory storage devices, power sources, and processors that execute software. ---------------------------------------------------------------------------

These proposed software safety requirements would streamline the software safety evaluation process by adding detail to the performance- based requirements in the existing rules. The software safety requirements in the proposed rule are levied in proportion to the potential software hazards and the degree of control over those hazards.\76\ In other words, software safety requirements would increase in rigor with the rise in potential safety risks and degree of autonomy. Conversely, software safety requirements would decrease in rigor with reductions in the potential safety risk or degree of autonomy.\77\ This approach would codify existing FAA practice of modulating the stringency of review commensurate with the level of public risk. The FAA would also add more clarity to the software scaled requirements to guide applicants to appropriate and predictable engineering judgments when determining the proper depth and breadth of software development, analysis, and verification activities. The FAA expects these changes would enable innovation by setting predictable safety requirements based on knowable characteristics of new software systems and in proportion to the risks involved with the innovation. For a detailed discussion, please see the Additional Technical Justification and Rationale discussion later in the preamble. ---------------------------------------------------------------------------

\76\ For the purpose of this rulemaking, software hazards are those hazardous conditions created by the execution of software, or for which software is used as a mitigation or control. \77\ The FAA uses the phrase ``level of rigor'' to describe the amount of precision and effort applied by an applicant to address the severity of a hazard and associated software autonomy. ---------------------------------------------------------------------------

H. Hybrid Launch Vehicles

Hybrid vehicles are vehicles that have some characteristics of aircraft and other characteristics of traditional launch or reentry vehicles. This proposal would allow an operator to forego the use of flight abort as a hazard control strategy during certain phases of flight if the hybrid launch or reentry vehicle has a high demonstrated reliability during those phases of flight. The FAA would make these determinations on a case-by-case basis based on a vehicle's demonstrated reliability. The FAA may regulate hybrid vehicles under either the commercial space transportation or the civil aircraft regulations, depending on the operation. For a flight of a hybrid vehicle where a carrier aircraft has been modified to carry a rocket and the operator intends to ignite the rocket, the FAA considers the aircraft a component of the launch vehicle.\78\ The combination launch vehicle system is authorized solely by a vehicle operator license or experimental permit under Title 51. The FAA currently authorizes the operation of hybrid vehicles using a license or permit for the entire mission from preflight ground activities through taxi, take off, flight, landing, wheel stop, and post-flight safing for all components of the combined launch vehicle system. The FAA has granted a license to hybrid vehicles such as the Stargazer/Pegasus, WhiteKnightOne/SpaceShipOne, WhiteKnightTwo/ SpaceShipTwo, and Cosmic Girl/LauncherOne combinations. In addition to carrier aircraft models, hybrid vehicles may also include future concepts such as a single vehicle with both air-breathing and rocket engines, winged launch or reentry vehicles, balloon-launched rockets, and other concepts that may have characteristics of both aviation and traditional launch or reentry vehicles.\79\ The FAA will work with applicants using hybrid vehicles during pre-application to identify the appropriate regulatory path. To date, the FAA has issued guidance in two legal interpretations on the process for determining whether flights or portions of flights of hybrid vehicles are regulated under title 49 or Title 51.\80\ As new hybrid concepts are unveiled, the FAA anticipates issuing additional guidance to assist operators. ---------------------------------------------------------------------------

\78\ ``Chapter 509 applies when [a hybrid] system operates as a launch vehicle from the flight of the carrier aircraft, through ignition of the rocket, to the return and landing of the carrier aircraft and the suborbital rocket. For a mission that does not entail ignition of the rocket, the FAA's aviation statute and regulations apply.'' See Legal Interpretation to Pamela L. Meredith from Mark W. Bury (September 26, 2013). \79\ An example of a hybrid vehicle that does not use a carrier aircraft is the World View capsule. This capsule is not a rocket, but it meets the definition of a launch vehicle because it operates at an altitude where it needs to be designed, built, and tested to operate in outer space. See Legal Interpretation to Pamela L. Meredith from Mark W. Bury, September 26, 2013; (https://www.faa.gov/about/office_org/headquarters_offices/agc/practice_areas/regulations/interpretations/data/interps/2013/meredith-zuckertscoutt&rasenberger%20-%20(2013)%20legal%20interpretation.pdf). Similar to other hybrid vehicles, when not operating as a launch vehicle, World View will operate under the appropriate aviation provisions of title 49. \80\ Legal Interpretation to Kelvin B. Coleman from Lorelei Peter, July 23, 2018; (https://www.faa.gov/about/office_org/headquarters_offices/agc/practice_areas/regulations/interpretations/data/interps/2018/coleman-ast-1%20-%20(2018)%20legal%20interpretation.pdf); Legal Interpretation to Pamela L. Meredith from Mark W. Bury, Sept. 26, 2013; (https://www.faa.gov/about/office_org/headquarters_offices/agc/practice_areas/regulations/interpretations/data/interps/2013/meredith-zuckertscoutt&rasenberger%20-%20(2013)%20legal%20interpretation.pdf). ---------------------------------------------------------------------------

The FAA has worked with and received input from industry on how to regulate hybrid vehicles. For instance, in 2017 and 2018, the FAA convened a Safety Risk Management (SRM) panel consisting of FAA and industry representatives to review and assess hazards associated with captive carry operations.\81\ The panel recommended dispensing with any aircraft hazard area requirement during the captive carry phase of flight for previously licensed hybrid vehicles with fixed-wing carrier aircraft. The ARC also recommended that the FAA set a different standard for hybrid vehicles, specifically that the FAA not require an FSA for operations where the agency has already considered impacts to public safety during the airworthiness certification process. Additionally, the ARC recommended that an operator only be required to conduct an FSA for those portions of flight when the hazardous configuration of the hybrid system differs from that approved under an experimental airworthiness certificate or equivalent authorization. ---------------------------------------------------------------------------

\81\ The SRM panel members included FAA representatives from the Air Traffic Organization, Aviation Safety, and the Office of Commercial Space Transportation. The panel also included civil aviation and commercial space participants such as the Air Line Pilots Association, the National Air Traffic Controllers Association, Orbital ATK, Virgin Galactic, Virgin Orbit, and Mojave Air and Space Port. ---------------------------------------------------------------------------

As discussed earlier, the FAA proposes to provide flexibility for certain phases of flight with respect to FSA (proposed Sec. 450.113(a)(5)) and FSS (proposed Sec. 450.101(c)) requirements. This is consistent with the ARC's recommendation. The FAA recognizes that airworthiness certificates and licenses, when developed collaboratively between the Aviation Safety and Commercial Space Transportation lines of business, sufficiently protect the public. In these cases, the FAA would include a license term and condition for a current airworthiness certificate. Specifically, the license would impose terms and conditions such as compliance with certain part 91 (General Operating and

[[Page 15322]]

Flight Rules) requirements and airworthiness operating limitations, not including any restrictions on compensation or hire. This blended approach of combining airworthiness with part 450's system safety requirements would ensure public safety without the need for an FSA. This proposal would reduce FSA, CEC, and FSS requirements for phases of flight such as the captive carry phase, the carrier-vehicle-alone phase, and any rocket component glide back. The captive carry phase of flight starts when the carrier vehicle takes off carrying the rocket aloft and transports it to the rocket release location. The carrier-vehicle-alone phase starts when the carrier vehicle releases the rocket, and includes all flight activities in support of the mission until the carrier vehicle lands and is safed. During the carrier-vehicle-alone phase, the rocket component is conducting its rocket-powered and coast phases. The rocket coast phase occurs immediately after the rocket engine shuts down, and is not considered an aviation-like glide phase because the pilot does not have significant control authority over the instantaneous impact point (the predicted impact point following thrust termination of a vehicle). For returning rockets, there may be a glide phase which begins at a point to be determined on a case-by-case basis after the vehicle completes any reconfiguration necessary and demonstrates non-rocket powered control authority and ends when the vehicle lands. The FAA would work with hybrid vehicle applicants during pre- application consultation to determine the applicability of FSA, CEC, and FSS requirements. For example, the FAA might determine the quantitative FSA requirement for those portions of a mission where the vehicle operates as a civil aviation aircraft governed by civil aviation regulations (as incorporated into the license) is unnecessary because the vehicle has demonstrated reliability during that phase as indicated by the issuance of an airworthiness certificate. Thus, an applicant would not have to conduct the quantitative FSA for the aircraft-like controllable phases of flight, such as the captive carry phase or for phases with non-rocket powered or glide phases previously authorized under an airworthiness certificate. This would not normally be the case during the rocket- powered, coast, reentry, or glide back phases of flight that are unique to space flight. All other regulatory requirements, including system safety requirements, would apply to the entire mission. Due to the unknown operating characteristics of future hybrid vehicles, the FAA is not proposing to provide a blanket FSA exemption for all hybrid systems.

I. Flight Safety Analysis Overview

For purposes of this proposed rule, a flight safety analysis consists of a set of quantitative analyses used to determine flight commit criteria, flight abort rules, flight hazard areas, and other mitigation measures, and to verify compliance with the public safety criteria in proposed Sec. 450.101. The FAA proposes 15 sections for flight safety analysis. The analyses are described here briefly because of their overall importance to the regulation and are discussed in greater detail in the ``Additional Technical Justification and Rationale'' section. Furthermore, the FAA plans to publish updated ACs and guidelines to describe acceptable means to conduct these analyses. The first two sections for FSA would outline the scope, applicability, and methods for conducting FSAs: 1. Flight Safety Analysis Requirements--Scope and Applicability (Sec. 450.113). This section would establish the portions of flight for which an operator would be required to perform and document an FSA and would identify the analyses required for each type of operation. 2. Flight Safety Analysis Methods (Sec. 450.115). This section would set methodology requirements for FSAs, including level of fidelity. Three sections would require fundamental flight safety analyses: 1. Trajectory Analysis for Normal Flight (Sec. 450.117). All the FSAs depend on some form of analysis of the trajectory under normal conditions, referred to as a normal trajectory. 2. Trajectory Analysis for Malfunction Flight (Sec. 450.119). A malfunction trajectory analysis is necessary to determine how far a vehicle can deviate from its normal flight path in case of a malfunction. This analysis helps determine impact points in case of a malfunction and is therefore a vital input for the analyses needed to demonstrate compliance with risk criteria. 3. Debris Analysis (Sec. 450.121). A debris analysis is necessary to characterize the debris generated in various failure scenarios, including those that could produce an intact vehicle impact. Four analyses would produce information necessary to implement flight abort as a hazard control strategy: 1. Flight Safety Limits Analysis (Sec. 450.123). A flight safety limit analysis is necessary to identify uncontrolled areas and establish flight safety limits that define when an operator must initiate flight abort to (1) ensure compliance with the public safety criteria of proposed Sec. 450.101, and (2) prevent debris capable of causing a casualty from impacting in uncontrolled areas if the vehicle is outside the limits of a useful mission. 2. Gate Analysis (Sec. 450.125). A gate analysis is necessary to determine necessary openings in a flight safety limit through which a vehicle may fly, provided the vehicle meets certain pre-defined conditions indicating an ability to continue safe flight. 3. Data Loss Flight Time and Planned Safe Flight State Analyses (Sec. 450.127). A data loss flight time analysis is necessary to establish when an operator must abort a flight following the loss of vehicle tracking information. A planned safe flight state analysis is necessary to determine when an FSS is no longer necessary. 4. Time Delay Analysis (Sec. 450.129). A time delay analysis is necessary to establish the mean elapsed time between the violation of a flight abort rule and the time when the flight safety system is capable of aborting flight for use in establishing flight safety limits. One section addresses probability of failure analysis: 1. Probability of Failure Analysis (Sec. 450.131). During any particular flight or phase of flight, an estimated probability of failure, and how that probability is allocated across flight time and vehicle response mode, is necessary to support the determination of hazard areas and risk. One section addresses the determination of flight hazard areas: 1. Flight Hazard Area Analysis (Sec. 450.133). This analysis is necessary to determine any region of land, sea, or air that must be surveyed, publicized, controlled, or evacuated in order to protect the public health and safety, and safety of property. Three sections would be necessary to determine whether risk criteria are met for different types of hazards: 1. Debris Risk Analysis (Sec. 450.135). A debris risk analysis is necessary to determine whether the individual and collective risks of public casualties, due to inert and explosive debris hazards meets public safety criteria. 2. Far-field Overpressure Blast Effects Analysis (Sec. 450.137). This analysis is necessary to determine whether the potential public hazard from broken windows as a result of impacting explosive debris, including impact of an intact launch vehicle, meets public safety criteria.

[[Page 15323]]

3. Toxic Hazards for Flight (Sec. 450.139). This analysis is necessary to determine whether hazards associated with toxic release meet public safety criteria. Lastly, one section is necessary for the launch of an unguided suborbital launch vehicle using wind weighting as a hazard control strategy. A launch vehicle using other mitigations would not be required to conduct this analysis: 1. Wind Weighting for the Flight of an Unguided Suborbital Launch Vehicle (Sec. 450.141). This section would outline a wind weighting analysis that is required to ensure that the launch of an unguided suborbital launch vehicle using wind weighting as a hazard control strategy meets public safety criteria.

J. Safety-Critical Systems

1. Safety-Critical Systems Design, Test, and Documentation The FAA proposes to consolidate the design, test, and documentation requirements for safety-critical components in proposed Sec. 450.143 (Safety-Critical System Design, Test, and Documentation). A common set of requirements is needed for clarity and consistency. Safety-critical systems or components include those systems or components whose performance is essential to ensuring public safety. Historically, the FAA has considered the FSS to be the only safety- critical system on an ELV. For RLVs and reentry vehicles, the use of a systematic, logical, and disciplined system safety process is meant to identify safety-critical systems and the extent of prudent operational controls.\82\ If a system failure would cause any hazards and those hazards could reach a populated area, then the system is likely a safety-critical system. Generally, RLV operators incorporate FSSs, although they may also incorporate other safety-critical elements of risk mitigation and hazard control. Non-RLV reentry vehicles also require a thorough system safety process to identify safety-critical hardware. ---------------------------------------------------------------------------

\82\ Some of the more commonly used methodologies include Preliminary Hazard Lists (PHL), Preliminary Hazard Analyses (PHA), Event Tree Analyses (ETA), Fault Tree Analyses (FTA), FMEAs, and FMECAs. Generally, these methodologies help operators determine whether a system failure could cause a loss of vehicle control, a vehicle breakup or other creation of uncontrolled debris, a discharge of hazardous material, or would prevent safe landing. ---------------------------------------------------------------------------

The current rules for ELV, RLV, and reentry vehicle safety-critical systems are quite different. However, in practice, the evaluation of the safety of such systems is very similar. Parts 415 and 417 require ELVs to have very reliable hazard-constraining FSSs that ensure public safety. These FSSs are subject to design requirements, extensive design qualification testing, and acceptance testing of all components. RLVs and reentry vehicles are required to undergo a comprehensive system safety engineering process that, in part, identifies and eliminates hazards to reduce the associated risk to acceptable levels by defining safety-critical systems and identifying associated hazards and risks. Under system safety, an operator develops design-level safety requirements and provides evidence for verification and validation of safety-critical systems and requirements. For safety-critical systems this serves the purpose of design qualification and acceptance. Given that RLVs are built to experience multiple flights, the lifecycle \83\ of safety-critical systems must also be considered as part of the design, testing, and documentation. ---------------------------------------------------------------------------

\83\ Many operators seek to refurbish or otherwise reuse safety- critical systems for multiple flights. Operators must design, test, and document safety-critical systems to demonstrate their safety- critical systems can continue to operate reliably throughout the component life in all predicted operating environments. ---------------------------------------------------------------------------

i. Current Qualification and Acceptance Testing Requirements Qualification testing is an assessment of a prototype or other structural article to verify the structural integrity of a design. Generally, qualification testing involves testing the design under a number of different environmental factors to stress the design, with a multiplying factor applied to the expected environmental testing limit. This qualification testing is conducted for temperatures, tensile loads, handling shocks, and other expected environmental stressors. Unlike qualification testing that is performed on qualification units, acceptance testing is performance testing conducted on the actual hardware to be used on a vehicle after the completion of the manufacturing process. Generally, acceptance tests are performed on each article of the safety-critical flight hardware to verify that it is free of defects, free of integration and workmanship errors, and ready for operational use. Acceptance testing includes testing for defects, along with environmental testing similar to the qualification testing described earlier. For ELVs, qualification and acceptance testing are important verification of the reliability of all FSSs at the subsystem and component level, and ensures the safe operability of the only safety- critical system on any given ELV. For ELVs, current qualification and acceptance testing requirements and procedures for FSS subsystems and components are listed in Sec. Sec. 417.305, 417.307, and appendix E of part 417 (E417). As FSSs are the only safety-critical systems on traditional ELVs, the component-level testing requirements in part 417 describe the testing of specific possible components in great detail, going so far as to differentiate testing requirements for silver-zinc batteries in E417.21 from nickel-cadmium batteries in E417.22. While the FAA has approved alternative FSSs, the prescription level of the current requirements discourages significant innovation. The same emphasis on validation of design and verification of hardware tolerances applies to components that have been identified as safety-critical during a system safety process. For RLVs and reentry vehicles, a system safety process is required by Sec. 431.35(c).\84\ Under the system safety process, a vehicle designer must assess nominal and non-nominal flight scenarios of the vehicle and must account for any possible safety-critical system failures during flight that could result in a casualty to the public. Those vehicle operators are required, by Sec. 431.35(d)(3), to identify all safety-critical systems and are required by Sec. 431.35(d)(7) to demonstrate the risk elimination in relation to those safety-critical systems. While not explicitly called out in the current part 431 or 435, qualification and acceptance testing are the widely accepted standards for demonstrating that safety-critical systems, subsystems, and components are not at risk of failing during flight. ---------------------------------------------------------------------------

\84\ Section 431.35(c) is required for reentry vehicles by Sec. 435.33. ---------------------------------------------------------------------------

Current regulations are undefined with respect to the applicability of qualification and testing of safety-critical components that are not listed in Sec. Sec. 417.301(b), 417.305 and 417.307, or appendix E of part 417. The regulations are similarly ambiguous if the vehicle does not have a traditional FSS but still has components that are considered safety-critical, like many vehicles licensed under part 431. This ambiguity has led to regulatory uncertainty, which in turn has resulted in lengthy exchanges between the FAA and license applicants about what components and systems needed to be tested, what testing would be acceptable to the FAA, and why that testing was necessary to be compliant. Testing is currently generally required for safety-critical systems across all vehicle types, either explicitly or as verification and validation in the

[[Page 15324]]

system safety process, but this is often not well-reflected in the current regulations. As a result, applicants often are confused by qualification testing requirements asserted by the FAA for RLVs when there are no explicit qualification testing requirements in part 431. ii. Current Fault Tolerance Requirements Fault-tolerance is the idea that a system must be designed so that it is able to perform its function in the event of a failure of one or more of its components. In a fault-tolerant design of a safety-critical system, no single credible fault should be capable of increasing the risk to public safety beyond that of a nominal operation. Typically, a fault-tolerant design applies redundancy or a system of safety barriers to ensure the system can function, though perhaps with reduced performance. An example of a fault-tolerant design is an aircraft with multiple engines that can continue flying even if one of the engines fails. The current part 417 regulations cover fault-tolerant design of FSS components as a set of explicit prescriptive requirements. For instance, Sec. 417.303(d) specifically lists fault-tolerance as a requirement of an FSS command control system design, requiring that no single failure point be able to inhibit the system's function or inadvertently transmit a flight termination command. An operator must demonstrate that the command system, in accordance with Sec. 417.309(c), is fault tolerant through analysis, identification of possible failure modes, implementation of redundant systems or other mitigation measures, and verification that the mitigation measures will not fail simultaneously. Appendix D of part 417 (section D417.5) further details single fault tolerance and prescribes redundancy of command strings that are structurally, electrically, and mechanically separated to ensure that any failure that would damage, destroy, or otherwise inhibit the operation of one redundant component would not inhibit the operation of the other redundant component. The current ELV regulations are prescriptive and often dictate specific implementations of fault-tolerance where other forms may be adequate. For instance, a fail-safe approach has been used in the rationale of past applicants that use thrust termination systems to protect public safety. A fail-safe design is a system that can fail in a controlled way, such that the failure will still ensure public safety, like elevator brakes held open by the tension of the elevator cable such that if the cable snaps the brakes engage and stop the elevator from falling. The FAA has granted waivers to the redundancy requirement of section D417.5(c) for fail-safe safety-critical systems that have been integrated in such a way that a loss of power to that system would result in direct thrust termination of the launch vehicle though deactivation of normally-closed valves. Also, ELOS determinations have been issued for flight termination receivers that have fail-safe commands that are issued on signal loss because the failure of the system automatically results in termination of the flight and the constraint of flight hazards. Less prescriptive fault- tolerant design regulations could enable such designs instead of requiring waivers or ELOS determinations. Operations licensed under parts 431 and 435 may not have traditional FSSs, but the need for fault-tolerance is implicitly derived from the system safety process of Sec. 431.35(c) and (d), as it is often a necessary control for an identified hazard. The FAA views fault-tolerance as a necessary characteristic of any reliable system. The current fault tolerance provisions lack clarity in the scope of their applicability to RLVs and reentry vehicles because they are implicit in the system safety processes of hazard identification and mitigation. As with the testing requirements, a lack of regulatory clarity is detrimental to both applicants and the FAA, leading to confusion, a drawn-out application acceptance process, and lengthy discussions to arrive at a clear understanding of how fault tolerance is applicable to a proposed operation. iii. Current Reuse Requirements Safety-critical FSSs of ELVs generally undergo a single flight. Therefore, very little life-cycle planning is required for them unless an operator seeks to reuse certain safety-critical components. However, ELV operators must still account for environments that the FSS is expected to encounter throughout the lifecycle of the system, including storage, transportation, installation, and flight, which generally are built into qualification and acceptance testing levels. Lifecycle planning is a more significant concern for reusable safety-critical systems because near-total reuse is an expected part of their operation. Current parts 415 and 417 contain requirements for the reuse of ELV FSS components. To be a licensed ELV operator, an applicant must submit to the FAA any reuse qualification testing, refurbishment, and acceptance testing plans, in accordance with Sec. 415.129(f). Those test plans must show that any FSS component is still capable of performing as required when subjected to the qualification test environmental levels plus the total number of exposures to the maximum expected environmental levels for each of the flights to be flown. Previously flown FSSs must also abide by Sec. E417.13(a)(3), and the components must undergo one or more reuse acceptance tests before each flight to demonstrate that the component still satisfies all its performance specifications when subjected to each maximum predicted environment. Additionally, tests for reuse must compare performance measurements to all previous tests to ensure no trends emerge that indicate performance degradation in the component that could prevent the component from satisfying all its performance specifications during flight. As the lines have blurred between ELVs with significantly reusable safety-critical systems and RLVs, these requirements still contain good safety policy, but they are constrained by their limited coverage of only traditional FSSs. While operations licensed under part 431 are focused on RLVs, neither part 431 nor part 435 contain any explicit requirements placed on reuse. Like all other aspects of safety-critical system requirements, reuse under these parts is governed by the system safety process of Sec. 431.35. Safety-critical systems that do not account for expected lifecycle, refurbishment, and reuse do not adequately meet the hazard identification and risk mitigation of the system safety requirements. Implicit in the system safety requirements, commensurate testing is required to demonstrate that the planned lifecycle performance remains accurate. Reuse of safety-critical components is a potential hazard that needs to be mitigated. Reuse induces stress on components and systems that can degrade operational performance if not accounted for in design and testing. Additionally, ``reuse'' implies multiple uses of a component after its initial intended lifetime or outside of its initial intended operating environments. Based on industry best practices, intended use and lifetime should be designed into components initially; qualification and acceptance testing should be based on predicted operating environments that encompass the entire lifetime of a system; and lifecycle management practices should be used to refine initial predictions. The current lack of a clear, unified, and simple requirement that explicitly covers reuse for all safety-critical systems leads to prescriptive

[[Page 15325]]

constraints on ELV operators and regulatory confusion for RLV and reentry operators who are unfamiliar with the implicit requirements of a system safety process. iv. Consolidation of Design, Test and Documentation Requirements The FAA proposes to consolidate the design, test and documentation requirements for safety-critical systems and components, both identified by a system safety process and as part of an FSS, currently found in parts 415 and 417, 431, and 435. Specifically, the FAA proposes to provide performance-based requirements for safety-critical systems, including fault tolerant design, design qualification testing, hardware acceptance testing, and the verification of flight environments to assess the life-cycle of safety-critical systems for reuse purposes. Under proposed Sec. 450.143, all safety-critical systems would be required to meet these requirements, including a FSS that also would be required to meet the additional requirements of proposed Sec. 450.145. By having a consistent set of overarching requirements regulating the design, testing, and documentation of safety-critical systems and hardware, the FAA anticipates that applicants would be enabled to implement new risk-mitigating design strategies under a clear and consolidated regulatory regime. New technologies that emerge would be covered by the general requirements without causing regulatory delays due to confusion, increasing paperwork burdens required for requesting waivers, or waiting for future rulemaking changes necessary to allow emerging technologies. These criteria would be the standards for demonstrating that such systems can survive and perform to an adequate level of safety in all operating environments. The ARC recommended that better standards need to be developed regarding safety-critical systems. The ARC pointed out that there is no single process or procedure that documents an acceptable way to go through a system design and determine safety-criticality, and it asked for better guidance on safety-criticality, given that usually industry views criticality more from a mission assurance point of view. More generally, the ARC requested a more performance-based regulatory regime, with a clearer focus on safety and greater flexibility for novel operations. In regards to reuse and maintenance, the ARC suggested that requirements should be focused on maintaining reliability of inputs. The ARC specifically called out the section E417.13 requirement to remove and recomplete acceptance testing prior to reuse of flight safety system components between each flight as an untenable burden both in terms of cost and time. Furthermore, the ARC also noted that continued acceptance testing of flight hardware to predict environmental levels plus margins puts undue strain on flight systems and can significantly reduce their lifespan. To remedy the confusion resulting from a current lack of regulatory clarity for RLVs and reentry vehicles, proposed Sec. 450.143(c) and (d) would explicitly require qualification testing of the design and acceptance testing of the safety-critical flight hardware. To remedy the implied design constraints of current detailed requirements for ELVs, proposed Sec. 450.143(c) and (d) would be general, high-level requirements for demonstrating the performance of safety-critical system design, and that the system is operational and free from defects and errors. Specifically, proposed Sec. 450.143(c) would require an operator to functionally demonstrate \85\ the design of a vehicle's safety- critical systems at conditions beyond its predicted operating environment. The design qualification tests should include enough margin beyond predicted operating environments to demonstrate that the system design can tolerate manufacturing variance or environmental uncertainties without performance degradation. ---------------------------------------------------------------------------

\85\ Functional demonstration is generally achieved through testing. ---------------------------------------------------------------------------

Proposed Sec. 450.143(d)(1) would require operators to perform a functional demonstration of any safety-critical systems by exposing them to their predicted operating environment with margin. The performance of the flight hardware during the test would be required to demonstrate that the flight units are free of defects, integration or workmanship errors, and are ready for operational use. Alternatively, an applicant would be able to comply with proposed Sec. 450.143(d)(2) instead of proposed Sec. 450.143(d)(1). If an applicant chooses to comply with proposed Sec. 450.143(d)(2), it would be required to ensure functional capability and that the flight hardware remains free from error and defect during its service life through a combination of in-process controls and a quality assurance process. This flexible approach to acceptance testing would relieve some of the burdens of a traditional acceptance testing regime and would add clarity that these demonstrations are required for all safety-critical flight hardware. Proposed Sec. 450.143 would clearly state the requirements for all safety-critical system components and eliminate the ambiguity that exists in the current regulations regarding required testing of safety- critical system components that are not a part of an FSS. While FSSs are safety-critical systems, their criticality requires additional requirements beyond proposed Sec. 450.143. The consolidated performance requirements for FSS components are detailed in proposed Sec. 450.145, and are discussed in the ``Flight Safety System'' section of this preamble. As the proposed rule seeks to make the safety requirements of Sec. 450.143 applicable to all commercial space launch and reentry vehicles, there should be better clarity across the industry and the government regarding what is required of safety-critical systems for both design qualification testing and flight hardware acceptance testing. Also, as recommended by the ARC, the FAA's proposal would allow for the possibility of other forms of acceptance testing methodologies and quality controls, subject to approval of the FAA, for safety-critical components that are not directly covered by the flight safety system requirements. This option should enable new business practices but maintain the safety verification necessary to ensure public safety. The ARC did not speak specifically to fault tolerant design but did indicate that vehicle reliability and architecture should be considerations in the FAA's evaluation of novel systems. Proposed Sec. 450.143(b) would require an applicant's safety-critical system to be designed so that no single credible fault would impact public safety. This proposal would provide clarity to the scope of the requirement of fault-tolerance by defining it as an explicit design performance requirement. It would replace many specific prescriptive requirements in part 417's subpart D and appendices D and E with a single general performance requirement and clarify the scope of applicability for RLV and reentry vehicle applicants. Additionally, by requiring only that the safety-critical systems be designed to be fault tolerant so that no single credible fault can lead to increased risk to public safety, the proposed regulations would allow flexibility as to the method an operator uses to comply with the requirements. For example, the FAA anticipates that an operator might choose to comply with proposed Sec. 450.143(b) with a design that provides for redundancy for systems that can be duplicated or

[[Page 15326]]

through damage-tolerant design for those safety-critical systems (like primary structures) that cannot be redundant. It is expected that this flexibility would accommodate technical innovation. Additionally, an operator would be able to satisfy the fault-tolerance requirement by fail-safe designs that have traditionally been approved through ELOS determinations, eliminating the need for applicants to apply for additional FAA review and evaluation. The ARC advised the FAA to focus on verifying the veracity of maintenance processes for reuse, combined with alternatives to acceptance testing on per flight basis. The FAA believes it has addressed the testing alternatives in this NPRM and agrees that the processes and procedures to ensure safety-critical systems are safe for reuse are an important part of lifecycle validation. Given safety- critical systems are essential to public safety, the FAA proposes that an operator would be required to validate predicted operating environments against actual operating environments and assess component life throughout the lifecycle of the safety-critical unit. This validation can be done through an initial fatigue life assessment and continual accounting of remaining components life or through a comprehensive inspection and maintenance program that accounts for damage accumulation and fault detection. Proposed Sec. 450.143(e) would require that predicted operating environments be based on conditions expected to be encountered in all phases of flight, recovery, preparation, and transportation. It would also require an operator to monitor the environments experienced by safety-critical systems in order to validate the predicated operating environment and assess the actual component life left or to adjust inspection periods. While the system safety and FSS approaches to reuse can further define specific requirements, the FAA proposes more general requirements on the operator to account for the complete lifecycle of each safety-critical system, considering the design, testing, and use of safety-critical components. Allowing operators to determine a proposed lifecycle for a safety-critical system, to demonstrate operational capabilities and environmental endurance through testing, to devise processes for monitoring the lifecycle of the safety-critical system, and setting criteria and procedures for refurbishment or replacement allows operators flexibility in their business plans. Having this flexibility would allow applicants to demonstrate to the FAA how they would ensure reused safety-critical components will not degrade in performance. The FAA anticipates that such a demonstration would include elements such as qualification of the design for its intended lifetime; acceptance testing to screen components; monitoring of environmental levels during use; and monitoring component health through inspections for either disposal or refurbishment. While the lifecycle management requirement would give the applicant flexibility on implementation, the proposed rule would require applicants to consider the implementation details such as maintenance, inspection, and consumable replacement. With the flexibility of the top-level requirement, applicants could continue to employ rigorous, per flight acceptance testing of safety-critical components, or with enough flight data they may be able to employ a system more similar to commercial aviation where flown components can be assessed in light of the actual operating environment and planned component reuse does not require component testing on a per flight basis. Monitoring of environments and assessment of safety-critical hardware for reuse is expected to affect the probability of failure that would feed back into FSAs as a check that risk to public safety is not increased. These flexible, top-level requirements for safety-critical systems would make explicit the currently implicit reuse requirements of parts 431 and 435's system safety process, improving regulatory clarity and operational flexibility, while still requiring the important planning, monitoring, and assessments necessary to ensure public safety. To demonstrate compliance with the proposed performance requirements, the FAA proposes clear application requirements in Sec. 450.143(f). As in the current Sec. 431.35(d)(3) and (5), an applicant would have to describe and diagram all safety-critical systems in its application. Similar requirements exist for ELV flight safety systems of part Sec. 415.127(b) and (c). Section 450.143(f)(3) also would require a summary of the analysis detailing how applicants arrived at the predicted operating environment and duration for all qualification and acceptance testing. This is current practice, and proposed Sec. 450.143(e) makes this requirement explicit for RLVs and reentry vehicles. The proposed requirements are also more generalized and adaptable than the current component-level requirements for ELVs. Under proposed Sec. 450.143(f)(4) and (5), applicants would be required to detail their plans for lifecycle monitoring by describing any instrumentation or inspection processes used to assess reused safety- critical systems, and the criteria and procedures for any service life extension proposed for those system components. Much like the rest of the FAA's proposal, applicants of any vehicle type are already expected to provide this information, but the requirements have been distilled into high-level, generalized requirements to allow for maximum operational flexibility while still identifying the inputs the FAA needs to verify compliance with the safe performance and operation requirements. While FSSs are additionally subject to the requirements of proposed Sec. 450.145, the proposed requirements for safety- critical systems would clarify existing practice and enable novel concepts of safety and safety-critical design. 2. Flight Safety System An FSS is an integral tool to protect public health and safety and the safety of property from hazards presented by a vehicle in flight. An FSS allows an operator to exercise positive control of a launch or reentry vehicle, allowing an operator to destroy the vehicle, terminate thrust, or otherwise achieve flight abort. An extremely reliable FSS that controls the ending of vehicle flight according to properly established rules nearly ensures containment of hazards within acceptable limits. For that reason, the FAA considers an FSS a safety- critical system. The FAA currently requires an FSS for ELVs. Most RLVs--aside from unguided suborbital vehicles utilizing a wind weighting system or certain vehicles where the vehicle's operation is contained by physics--derive from the system safety process the need for some FSS to mitigate flight hazards. Traditional FSSs for ELVs are comprised of an onboard flight termination system (FTS), a ground-based command and control system, and tracking and telemetry systems. Historically, the flight safety crew monitoring the course of a vehicle would send a command to self- destruct if the vehicle crossed flight safety limit lines and in doing so threatened a protected area. Redundant transceivers in the launch vehicle would receive the destruct command from the ground, set off charges in the vehicle to destroy the vehicle and disperse the propellants so that an errant vehicle's hazards would not impact populated areas. While this method of flight abort through ordnance is conventional, the FAA currently does

[[Page 15327]]

not require an FSS to be destructive, as made explicit in the definitions of FSS in both Sec. Sec. 401.5 and 417.3. There has been some innovation in FSSs--thrust termination systems are used frequently and most RLVs can demonstrate regulatory compliance with part 431 with a safety system that achieves a controlled landing in the event of an aborted flight. As the commercial space transportation industry has matured, operators have proposed FSS alternatives. These alternative approaches include fail-safe single string systems that trade off mission assurance and redundancy, other fail-safe consequence mitigation systems, and dual purpose systems such as FSSs that reuse the output of safety-critical GPS components for primary navigation avionics. These alternative approaches are not well governed by the existing regulations. i. Current Regulatory Framework for FSS The present ELV licensing requirements in parts 415 \86\ and 417 include lengthy and detailed requirements for the performance of an FSS and its components, as well as detailed testing and reporting requirements. These requirements were originally adopted to match current practices at Federal ranges. Section 417.107(a) identifies the need for an FSS while subpart D (Sec. Sec. 417.301-417.311) identifies the performance requirements of an FSS and its component systems. Appendices D \87\ and E \88\ include prescriptive FSS design, performance, testing, and analysis requirements. Under part 417, an FSS must consist of an FTS, a command and control system,\89\ support systems (like tracking and telemetry),\90\ and identification of the functions of any personnel who operate FSS hardware or software.\91\ Together, these requirements allow for a very limited range of FSS concepts because they are primarily focused on containment of hazards by destruction of the vehicle or stage. ---------------------------------------------------------------------------

\86\ Part 415 contains the application requirements to demonstrate compliance with part 417 and the test report requirements to demonstrate compliance with the relevant appendices of part 417. Specifically, Sec. 415.127 requires detailed descriptions and diagrams of the FSS and subsystems, a list of all system components that have a critical storage or service life, detailed descriptions of controls and displays, the system analyses of Sec. 417.309, demonstration of compliance with the performance requirements, installation procedures, and tracking and monitoring validation procedures. Applicants must file all preliminary design data no later than 18 months before bringing any launch vehicle to a proposed launch site. \87\ Appendix D lists very detailed performance requirements and design reliability requirements including fault tolerance and redundancy, environment survivability requirements, radio command destruct parameters, remote and redundant safing mechanisms, positively controlled arming mechanisms, installation procedures, and system health monitoring. It also requires vehicles to have an automatic or inadvertent separation destruct system for any stage that does not possess a complete command destruct system but is capable of reaching a protected area before the planned safe flight state. \88\ Appendix E to part 417 contains the tests and analysis requirements to verify the performance requirements of FTSs and their components. It contains detailed component level charts for acceptance and qualification performance testing, including the number of samples (or percentage of the lot) that must undergo each test type. The testing plans must detail the environment, equipment, pass/fail criteria, measurements, other testing parameters, and any analyses planned in lieu of testing. \89\ A command control system transmits a command signal that has the radio frequency characteristics and power needed for receipt of the signal by the flight termination system onboard the launch vehicle. The command control system must include equipment to ensure that an onboard flight termination system will receive a transmitted command signal and must meet specific performance requirements in Sec. 417.303. \90\ Currently, under Sec. 417.307 an FSS must include two independent tracking sources and provide the launch vehicle position and status to the flight safety crew from liftoff until the vehicle reaches its planned safe flight state. Additionally, data processing, display, and recording systems must display, and record, raw input and processed data at no less than 0.1 second intervals. \91\ As part of the current requirements for an FSS, Sec. 417.311(a) requires human intervention capability for flight termination to be initiated by flight safety crew. Therefore, Sec. 417.307 requires design, test, and functional requirements for systems that support the functions of a flight safety crew, including any vehicle tracking system. ---------------------------------------------------------------------------

Section 417.301(b) permits applicants to propose alternative FSSs, which do not need to satisfy one or more of the prescriptive requirements of subpart D of part 417. This provision is intended to enable greater flexibility for innovation without negatively impacting safety. The FAA approves an alternative FSS if an operator establishes through a clear and convincing demonstration that a launch would achieve an equivalent level of safety to an operation that satisfies all of the existing FSS requirements. Alternative FSS, like traditional FSS, must still undergo rigorous analysis and testing to demonstrate the system's reliability to perform each intended function. Unlike ELVs, RLVs are not explicitly required to have an FSS, but the requirement for an FSS and its reliability requirement is derived as an essential hazard mitigation from a robust system safety process under part 431. This requirement falls under the Sec. 431.35(c) requirement for applicants to use a system safety process to identify the hazards and mitigate risks to public health and safety under non- nominal flight of the vehicle and payload. An acceptable system safety analysis identifies and assesses the probability and consequences of any reasonably foreseeable hazardous event and safety-critical system failures during launch flight that could result in a casualty to the public. Based on current practice, most RLVs must have some method to reliably achieve flight abort to fully mitigate flight risks and consequences, either in the form of a pilot that can safely abort flight using system controls, a more traditional FSS that is designed and tested in the same manner as is required for ELVs, or a system that can meet the requirements for an alternative FSS under Sec. 417.301(b). The lack of an explicit requirement for an FSS in part 431 often leads to confusion regarding what is expected for applicants mitigating hazards through flight abort. Reentry vehicles under part 435 are also subject to a system safety process to identify hazards and mitigate risks to public health and safety under non-nominal flight of the reentry vehicle and any payload. Because Sec. 435.33 points to part 431, an acceptable system safety analysis for reentry also assesses the probability and consequences of any reasonably foreseeable hazardous events during the reentry flight that could result in a casualty to the public. Unlike part 431, most part 435 reentries do not require an FSS because it is generally accepted that, if controlled reentries become uncontrolled, the vehicle is unlikely to substantially survive reentry. Due to the nature of the hazards associated with reentry, and since breakup is expected for non- nominal reentries, an FSS often cannot significantly ameliorate a reentry flight's risk or consequence. A reentry applicant must still account for the possibility of a random reentry in its risk analysis after attempting a reentry burn. ii. Autonomous Systems Current regulations do not allow an operator to rely solely on an autonomous system to terminate a flight. At the time of their publication, human control capability was considered critical to safety because neither software nor hardware had been proven reliable to make flight termination decisions. Since that time, the FAA has approved the use of autonomous FSSs for ELVs by finding that they can meet the requirements of an alternative FSS under Sec. 417.301(b). Applicants were able to demonstrate that the autonomous FSS achieved an equivalent level of safety to a launch with a human-in-the-loop as the risk to public safety was extremely low and the autonomous system had been flight tested in shadow mode. In past

[[Page 15328]]

rulemakings, the FAA has made clear that, in requiring human intervention capability for activation of an FSS, the FAA did not intend to foreclose development or use of autonomous systems. However, despite those assurances and the FAA findings of equivalent safety, current FAA regulations still expressly require that a capability exist for a person to intervene and make decisions for FSS activation. The FAA is proposing to update the regulations to match the current practice of allowing autonomous FSSs. By removing the outdated requirements for a human in-the-loop, the FAA believes that it would encourage further innovation without negatively impacting safety. The consequence analysis and reliability thresholds would continue to hold any potential autonomous FSS to the rigorous standards previously required of a human-initiated FSS, and the software as part of the autonomous FSS must be demonstrated to meet reliability requirements. With the recent advancements of the requisite technology and the performance constraints of the FSS, the FAA is confident that it is beneficial both to the commercial space transportation industry and public safety to explicitly allow flight abort to be governed by capable autonomous systems. iii. Current Requirement for Reliability of a FSS Each FTS and command and control system must satisfy the predicted reliability requirement of 0.999 at the 95 percent confidence level. For FSSs on both ELVs and RLVs, there are effectively only two methods of currently demonstrating that a system meets reliability standards. The first method is to test 2,995 units at expected operating environment levels with 0 failures to demonstrate a 0.999 design reliability at a 95 percent confidence level. Given the cost of FSS components, the cost of testing, and the time required to conduct such tests, this is not practicable. The second method arises out of RCC 319. The FSS requirements codified in part 417, including component performance requirements, and acceptance and qualification testing, were originally written to align FAA launch licensing requirements with the Federal launch range standards in RCC 319. Like part 417, RCC 319 requires qualification tests to demonstrate reliable operation in environments exceeding the expected operating environment for the system components, acceptance tests to demonstrate that the selected batch of components meets the requirements of the design specifications, and other preflight testing at the system or subsystem level to demonstrate functionality after installation. The benefit of the part 417 and RCC 319 method is that for qualification tests, generally only three test units are required. Three units are required instead of many more because the units are tested with margin above their predicted operating environment. Testing three units with the margin specified achieves the required reliability and confidence levels of 0.999 design reliability at 95 percent confidence level, rather than having to test 2,995 units at the predicted operating environment with no margin. iv. Proposed Reliability Standards for FSS Given the FAA anticipates that most commercial space vehicles will continue to control flight hazards through the use of FSSs, the FAA proposes in Sec. 450.145 to continue to require a very reliable FSS in most instances. Under the current regulations, FSS not only enable an operation to meet the collective and individual risk criteria during flight but also protect against low-probability but high-consequence events near the launch site or when flying over populated areas. As previously discussed, the FAA's proposal to quantify these low- probability but high-consequence events as CEC in proposed Sec. 450.101(c) would clearly delineate which operations are required to use an FSS to control for risks and consequences.\92\ The CEC calculation is the consequence, measured in terms of EC, without regard to the probability of failure. ---------------------------------------------------------------------------

\92\ As noted earlier, only operations that have a predicted consequence of 1 x 10-3 CEC or above for uncontrolled areas for each reasonably foreseeable vehicle response mode in any one-second period of flight would be required to implement an FSS to abort flight as a hazard control strategy. An FSS would not be required for operations that can be shown to have a predicted consequence of less than 1 x 10-3 CEC; however, a hazard analysis would be required for any operations without a FSS or demonstrable physical containment. ---------------------------------------------------------------------------

The underlying intent of the current prescriptive requirements was to have an FSS that could reliably perform flight abort to restrict hazards from reaching populated or otherwise protected areas. The FAA also recognizes that vehicles operating in remote areas are less likely to have significant consequences in the case of a flight failure. For operations where the consequence of a flight failure is less, the FAA has determined that, while still being highly reliable, the FSS may not need to be as highly reliable as an FSS for a vehicle operating in an area where the consequence of a flight failure is higher. Generally, this proposed relaxation of the FSS reliability requirement--based on reduced potential consequence--is expected to be applicable to operations launching or reentering in remote locations or for stages that do not overfly population centers. In order to achieve these scalable, performance-based requirements, proposed Sec. 450.145(a) would contain two reliability standards for an FSS. Proposed Sec. 450.145(a)(1) would require any operator with a consequence of 1 x 10-2 CEC or greater in any uncontrolled area for any vehicle response mode to employ an FSS with the standard design reliability of 0.999 at 95 percent confidence and commensurate design, analysis, and testing. This reliability standard would be consistent with various sections of part 417, in particular Sec. 417.309(b)(2), that require major FSS component systems, such as onboard flight termination systems and ground-based command control systems, to be tested to demonstrate 0.999 design reliability at 95 percent confidence. This reliability threshold would have to be demonstrated for the operation of the entire system, including any systems located on-board the launch or reentry vehicle, any ground- based systems, and any other component or support systems. Alternatively, in order to make regulations adaptable to innovative operations while maintaining appropriate levels of safety, operations with lower potential consequences would require an FSS with less demonstrated design reliability at the same confidence. Proposed Sec. 450.145(a)(2) would require any operator with a consequence of between 1 x 10-2 and 1 x 10-3 CEC in any uncontrolled area for any vehicle response mode to only employ an FSS with design reliability of at least 0.975 at 95 percent confidence and commensurate testing. The FAA considered simply setting the proposed Sec. 450.145(a)(2) threshold an order of magnitude lower, at 0.99 design reliability with a 95 percent confidence, to reflect the order of magnitude less CEC from the consequence analysis. Absent other standards to demonstrate compliance with the reliability threshold, that would mean testing 299 units with 0 failures, instead of testing 2,995 units with 0 failures. However, in consultation with NASA and Air Force representatives in the CSWG, the FAA has elected to propose that the reduced reliability threshold should be set at

[[Page 15329]]

0.975 design reliability with a 95 percent confidence for lower consequence vehicles. While there are no established standards to demonstrate the 0.975 reliability number, that threshold is consistent with reliability parameters in RCC 324 and represents existing single string flight reliability requirements. The FAA is confident that industry associations will develop consensus standards regarding design and testing that sufficiently demonstrate that a novel FSS design meets this reliability threshold. Until such time as an industry standard is established, proposed Sec. 450.145(a)(2) in practice may result in single string or equivalent FSSs being approved for operations in remote areas or for phases of flight that do not overfly populated areas. Similar to FSS that must meet the more reliable threshold, all means of compliance would be required to be accepted by the FAA in accordance with proposed Sec. Sec. 450.145(b) and 450.35. These proposed reliability requirements would replace the existing launch and reentry FSS licensing requirements on all commercial space transportation missions. However, the FAA anticipates that, with the consequence analysis driving the requirement to have an FSS, most reentry operations would continue to not require an FSS as is the current case under part 435. For launch operators, applicants would still be required to demonstrate the reliability by submitting to review of their design, testing, and analysis. Operators would still be required to monitor the flight environments actually experienced by their FSSs in accordance with proposed Sec. 450.145(c) to corroborate the qualification test data submitted to the FAA. Proposed part 450 would consolidate and clarify the performance requirements for future FSSs. In doing so, the FAA anticipates that some operations will be relieved of the burden of unnecessarily stringent FSS reliability requirements and that some operations will be able to utilize innovative concepts to achieve flight abort. By appropriately scaling FSS reliability to consequence analysis, the FAA expects to see the emergence of new industry standards, increased use of autonomous FSSs, and no measurable adverse impact to public health and safety or the safety of property. There is expected to be no measurable adverse impact to public health and safety or the safety of property because the lowered reliability threshold will only apply to launches and reentries which would not create significant consequences, given a flight failure. Furthermore, while rigorous tests and analysis should still be expected for most FSSs, FAA regulations would no longer prescribe a particular form of FSS. The proposed performance measure of reliability to achieve safe flight abort to meet collective and individual risk limits and to mitigate the possibility of low probability but high consequence events is the best method for maintaining safety while scoping FAA regulations to govern only the function, not the form, of FSSs. v. FSS Design, Testing, and Documentation Requirements Applicants using a FSS of any reliability threshold would be required to meet the proposed Sec. 450.143 safety-critical system design, test, and documentation requirements discussed previously. As an FSS will always be considered a safety critical system, any operator utilizing an FSS must comply with the requirements to design their system as fault tolerant, conduct qualification and acceptance testing, and provide evidence to validate predicted operating environments and component life. Proposed Sec. 450.145(d) would include the application requirements for an FSS. Similar to the current part 415 requirements, proposed Sec. 450.145 would require applicants to describe the FSS, including its proposed operation, and diagram the FSS in detail. The FAA's intent is to make these requirements less prescriptive than current regulations and also to allow more flexible time frames. Proposed Sec. 450.145(d) would require applicants to submit any analyses reports and acceptance, qualification, and preflight test plans used to demonstrate that the reliability and confidence levels are met. Any test plans or documentation would be required to detail the planned test procedures and the test environments. Further, an applicant would have to submit procedures for validating the accuracy of any vehicle tracking data utilized by the flight safety crew or the FSS to make the decision to abort flight. While proposed Sec. 450.145(d) consolidates these application requirements and removes prescriptive component-level design requirements, the proposed regulations would not require substantially different information than the FAA requires today to demonstrate that FSSs meet performance standards and will undergo the required testing prior to flight. vi. Reporting Requirements Under the preflight reporting requirements in proposed Sec. 450.213(d), operators would be required to submit, or to provide the FAA access to, any test reports associated with the flight safety system test plans approved during the application process. These reports must be submitted or made available no less than 30 days before flight unless the Administrator agrees to a different time frame under Sec. 404.15. In the reports, licensees would have to clearly show that the testing results demonstrate compliance with the reliability requirements in proposed Sec. 450.145(a). This is current practice under Sec. 417.17(c)(1) and (4) through (6). To show the FSS is in compliance and can support the mission as intended, FSS reports would continue to be required to include testing reports that detail the results of the approved subsystem and component-level testing, including any failures, any actions necessary to correct for any failures, actual testing environment showing sufficient margin to predicted operating environments, and a comparison matrix of the actual qualification and acceptance test levels used for each component compared against the predicted flight levels for each environment. Proposed Sec. 450.213(d)(4) would require licensees to report any components qualified by similarity analysis or some combination of analysis and testing. Preflight reporting is necessary to demonstrate compliance with the test plans approved in the application and to demonstrate that the FSS meets the reliability threshold prior to flight. Proposed Sec. 450.215 (Post-Flight Reporting) would continue to require licensees to submit a post-flight report no later than 90 days after an operation if there were any anomalies in the flight environment material to public health and safety and the safety of property, including those experienced by any FSS components; a practice currently required by Sec. 417.25(c). RLV operators licensed under part 431 are not currently required to submit a post-flight report identifying anomalies that are material to public safety and corrective actions, but the added burden is expected to be minimal. To accurately report any such anomalies so that they may be corrected in future flights, operators would also be required to monitor the FSS during each flight, in accordance with proposed Sec. 450.145(c). Any anomalies experienced by the FSS would be considered material to public health and safety and the safety of property and, therefore, would need to be included in post-flight reporting.

[[Page 15330]]

vii. ARC Recommendations The ARC suggested that, in a performance-based licensing scheme, the regulations should be flexible with regard to FSSs and allow an operator to propose a means of achieving the performance metric without dictating a specific hardware approach. For example, the ARC recommended that an operator should be able to propose an alternative to having a destruct flight termination system. While, the FAA believes that the current regulations allow for non-destructive FSSs, it acknowledges that the preponderance of the existing prescriptive requirements address FSSs that terminate flight through destructive means. The ARC recommended the current prescriptive requirements be moved to a guidance document. As discussed previously, the FAA intends to recognize RCC 319 as the accepted means of compliance in demonstrating that a FSS has a design reliability of 0.999 at 95 percent confidence. The RCC 319 document would maintain the common standards between all Federal launch and reentry safety authorities but also would be updated periodically to address the evolving space transportation industry. Industry could also develop new means of compliance in the future, as discussed below. The ARC also recommended that an FSS should not be required, proposing instead that an operator should only be required to meet risk calculations in the FSA and may do so by utilizing a FSS. The FAA disagrees that an FSS should not be required, as there are other safety factors to be considered beyond simple individual or collective risk, namely, the consequence of a failure as discussed earlier. However, the FAA has attempted to propose more flexible regulations that would allow some operations to be licensed without an FSS, or with novel concepts of FSS, or an FSS that may require less extensive demonstration of reliability. In quantifying the low probability but high consequence events that necessitate an FSS beyond collective and individual risk limits, the FAA intends to more clearly delineate when it would be appropriate for an operation to forego an extremely reliable FSS or an FSS completely. If an FSS is not required, the applicant would be required to demonstrate that hazards are contained or mitigated through a hazard analysis and system safety principles. In addition to proposing the acceptability of FSSs with a design reliability of 0.975 at 95 percent confidence, under certain situations, the FAA proposes to indicate more clearly that FSS concept and design is flexible and open to innovation as long as the reliability thresholds for flight abort are met. The ARC also discussed a number of concepts that industry believes should be considered in scaling an FSS's necessary reliability as determined through the FSA. The ARC pointed specifically to population density, the realm of reasonably foreseeable failures, trajectory, size, and explosive capabilities of the vehicle. The FAA proposes that these factors would be contemplated as a part of the consequence analysis required in the public safety criteria of proposed Sec. 450.101(c), alongside traditional measures of risk. In identifying FSS reliability thresholds pegged to potential consequence, or CEC, the reliability of FSSs is determined through analysis that accounts for factors such as what population centers a vehicle or debris can reach and potential failure modes. The FAA anticipates that this would address the ARC's recommendation that vehicles with low risk to the public, especially vehicles operating in remote and sparsely populated areas, may require a lower demonstrated reliability. To the question of how an applicant might demonstrate the reliability of an FSS with a less than extremely reliable design that does not otherwise meet current common standards like RCC 319, such as the FAA proposed threshold of 0.975 at 95 percent confidence, the ARC advised that several approaches may already exist. As previously discussed, the less reliable FSS can be demonstrated by testing several hundred units under expected environments, instead of the 2,995 tests required to demonstrate design reliability of 0.999 at 95 percent--but it is still likely that neither is practical or viable for most operators. In their place, alternative standards are necessary to approximate the demonstration of the reliability threshold through less burdensome means. The ARC report pointed to the Air Force Space Command's Space and Missile Systems Center Standard SMC-S-016, ``Test Requirements For Launch, Upper-Stage and Space Vehicles,'' as an example of a standard that allows for one unit of qualification testing, instead of the standard three units required by RCC-319.\93\ The ARC noted that standard may be useful for heritage systems that are already considered reliable. The FAA maintains that for 0.999 design reliability at 95 percent, the qualification testing of three or more units may be required to reduce the likelihood of either anomalous test passes or failures. The FAA seeks comment on this approach. The FAA also seeks comment on how SMC-S-016 could be incorporated as an accepted means of compliance for reliability demonstration of the lower reliability criteria. ---------------------------------------------------------------------------

\93\ As one company pointed out in the ARC report, SMC-S-016 and similar standards are for general vehicle testing and do not consider the higher reliability required for FSS, whereas RCC 319 and AFSPCMAN91-710 require additional margins and certainty. The company believes that testing a single unit is not sufficient, unless there was a tradeoff that increased the required test margin. ---------------------------------------------------------------------------

In discussions with Federal launch range personnel, it has been suggested that testing and analysis requirements in RCC 324 may be a more appropriate basis for evaluating a FSS meeting the lower reliability threshold. The FAA remains interested in identifying standards that are applicable or could be drawn upon to develop means of compliance to the proposed regulations. The FAA is also not foreclosing the idea that vehicles can demonstrate the reliability of the FSS or vehicle through flight history. The ARC pointed out in their report that certain aspects of FSSs can be tested in flight--for example using an autonomous FSS in ``shadow mode'' on-board a vehicle and testing the system's function with no ordnance or other active destruct capabilities. The FAA ultimately decided to not propose any explicit requirements pertaining to acceptable flight testing as a means of allowing industry applicants and the FAA to develop new accepted means of compliance in the demonstration of reliability. While the FAA wishes to encourage the innovation and development of novel reliability demonstration standards, the FAA also recognizes that such standards are not currently developed and would require extensive evaluation before they could be accepted as demonstrating fidelity and safety. Because the FSS is so critical to flight safety in the instances where it is required, new reliability and compliance demonstration strategies must be accepted by the FAA prior to application acceptance. In discussing the scalability of FSS requirements, the ARC proposed that the FAA delineate categories of operators and vehicles. The suggested categories included a new vehicle by a new operator, a proven vehicle by an experienced operator, a derived vehicle by an experienced operator, and considerations for vehicle hazard class and population density in operating areas. The FAA considered operator and vehicle categories as a means of scaling FSS reliability requirements as an alternative to consequence analysis, but determined that the relevant measure of public protection indicating the need for

[[Page 15331]]

an FSS is not experience, but risk and possible consequence. While less experienced operators will likely pose a higher risk, as accounted for in the probability of failure, experience does not account for the potential consequences of a vehicle failure. Experienced operators with experienced vehicle designs can propose operations that still pose a high risk to the public, or an operation with low risk but high potential consequences in the event of a failure. The FAA seeks comment on the proposal to use consequence, not operator experience, as a factor in level-of-rigor.

K. Other Prescribed Hazard Controls

1. Agreements The FAA proposes to streamline the existing agreement requirements by removing specific requirements for a variety of agreements and procedures and allowing an operator to determine what agreements would be needed for its particular operation. In Sec. 450.147 (Agreements), a vehicle operator would be required to have written agreements with any entity that provides a service or use of property to meet a requirement in part 450. Current Sec. 417.13 requires a launch operator to enter into an agreement with a Federal launch range to have access to and the use of U.S. Government property and services required to support a licensed launch from the facility and for public-safety related operations and support before conducting a licensed launch from a Federal launch range. The Federal launch range arranges for the issuances of notifications to mariners and airmen. Currently, for launches from a non-Federal launch site in the United States, a launch operator must ensure that launch processing at the launch site satisfies the requirements of part 417. For a launch from a launch site licensed under part 420, a launch operator must conduct its operations in accordance with any agreements that the launch site operator has entered into with any Federal and local authorities. These include agreements with the local U.S. Coast Guard district to establish procedures for the issuance of a Notice to Mariners (NTM) prior to a launch and with the FAA air traffic control (ATC) facility having jurisdiction over the airspace through which the launch will take place to establish procedures for the issuance of a Notice to Airmen (NOTAM) prior to the launch and for the closing of air routes during the launch window. For a launch from an exclusive-use site, where there is no licensed launch site operator, a launch operator must satisfy the requirements of part 420. In addition, a launch operator must: (1) Describe its procedures for informing local authorities of each designated hazard area near the launch site associated with a launch vehicle's planned trajectory and any planned impacts of launch vehicle components and debris; (2) provide any hazard area information to the local U. S. Coast Guard, or equivalent local authority, for the issuance of NTMs and to the FAA ATC office, or equivalent local authority, that have jurisdiction over the airspace through which the launch will take place for the issuance of NOTAMs; and (3) coordinate with any other local agency that supports the launch, such as local law enforcement agencies, emergency response agencies, fire departments, the National Park Service, and the Mineral Management Service. For launches of RLVs under part 431 and reentries under part 435, an operator must enter into launch and reentry site use agreements with a Federal launch range or a licensed launch or reentry site operator that provide for access to and the use of property and services required to support a licensed RLV mission or reentry and public safety-related operations and support. Additionally, an operator must enter into agreements with the U.S. Coast Guard and the FAA regional office that has jurisdiction over the airspace through which a launch and reentry will take place to establish procedures for the issuance of NTMs and NOTAMs. As discussed earlier, there are currently similar requirements under parts 417 and 431 and, by reference, part 435, for agreements to ensure that NTMs and NOTAMs are implemented. Part 417 references part 420, which also contains requirements for these notices and requires operators to describe procedures to ensure that these and other notifications are accomplished. Part 417 requires an operator to execute agreements with multiple entities. None of the current requirements adequately addresses NTMs and NOTAMs when the U.S. Coast Guard or the FAA does not have jurisdiction, such as with launches or reentries from or to foreign or international territories. Currently, these agreements must be in place before a license is issued. However, in practice, the FAA sometimes accepts draft agreements or makes the submission of the executed agreements a condition of the license. Under proposed Sec. 450.147, a vehicle operator would be required to enter into a written agreement with any entity that provides a service or property that meets a requirement in part 450. Such entities would include a Federal launch range operator, a licensed launch or reentry site operator, any party that provides access to or use of property and services required to support a safe launch or reentry under part 450, the U.S. Coast Guard, and the FAA. Other entities that provide a service or property could also include local, state, or federal agencies, or private parties. For instance, a local fire department might provide a standby service to control a possible fire, a state agency could provide any number of services such as road closures, and NASA might provide telemetry capability. Although agreements with local agencies, for example, may be necessary to ensure public safety, the FAA believes that it is overly prescriptive to list in regulation the specific entities with which each operator must enter into an agreement. This proposal would require an operator to enter into only those agreements necessary for its particular operation. If an operator works with multiple entities to satisfy requirements in proposed part 450, it would need multiple agreements. However, if agreements required under this proposed section are already addressed in agreements executed by the site operator, an operator would only need to enter into agreements with either the Federal launch range or other site operator and any entity with which the site operator does not perform the necessary coordination. In particular, Federal launch ranges almost always arrange for the issuance of NTMs and NOTAMs for launches.\94\ ---------------------------------------------------------------------------

\94\ Typically, Federal ranges do not arrange for the issuance of NTMs and NOTAMs for the disposal of a launch vehicle from orbit or the reentry of a reusable launch or reentry vehicle. ---------------------------------------------------------------------------

The proposal also contemplates agreements between a maritime or aviation authority other than the U.S. Coast Guard or the FAA. Unless otherwise addressed in agreements with the site operator, the proposed rule would require an operator to enter into such agreements for a launch or reentry that crosses airspace or impacts water not under the jurisdiction or authority of the U.S. Coast Guard or the FAA. Section 450.147(b) would require all agreements to clearly delineate the roles and responsibilities of each party in order to avoid confusion concerning responsibility for executing safety-related activities. Section 450.147(c) would require all agreements to be in effect before a license can be issued. However, as noted earlier, the FAA recognizes that agreements might not be finalized by the time the FAA is

[[Page 15332]]

prepared to make a licensing determination. Therefore, the regulation would allow an operator to request a later effective date, contingent upon the Administrator's approval. An operator could do this by providing the FAA the status of the negotiations involving the agreement including any significant issues that require resolution and the expected date for its execution. Under proposed Sec. 450.147(d), an applicant would be required to describe each agreement in its vehicle operator license application. An applicant should clearly delineate the roles and responsibilities of each party to the agreement to support a safe launch or reentry. The applicant would also need to provide a copy of any agreement, or portion thereof, to the FAA upon request. The FAA recognizes that some portions of agreements may contain business-related provisions that do not pertain to FAA requirements. Those portions would not be required. The FAA seeks comment on its proposed approach to agreements. 2. Safety-Critical Personnel Qualifications The FAA proposes to remove the certification requirements found in Sec. Sec. 417.105, 417.311, and 415.113 and replace them with performance-based requirements in Sec. 450.149 (Safety-Critical Personnel Qualifications). Section 450.149 would require qualified personnel to perform safety-critical tasks for launch and reentry operations. The FAA also proposes to expand personnel qualification requirements to ensure that safety-critical personnel are qualified to perform their assigned safety tasks. An operator must qualify and train its safety-critical personnel in performing their safety-critical tasks for all vehicle and license types because training mitigates the potential for human error during safety-critical operations. Currently, the FAA requires a personnel certification program in part 417 for personnel that perform safety- related tasks. Specifically, Sec. 417.105 requires that a launch operator employ a personnel certification program that documents the qualifications, including education, experience and training, for each member of the launch crew. The launch operator's certification program must include annual reviews and revocation of certifications for negligence or failure to satisfy certification requirements. Section 415.113 requires an operator to submit a safety review document that describes how the applicant will satisfy the personnel certification program requirements of Sec. 417.105 and identify by position individuals who implement the program. The document must also demonstrate how the launch operator implements the program, contain a table listing each hazardous operation or safety critical task certified personnel must perform, and include the position of the individual who reviews personnel qualifications and certifies the personnel performing the task. In Sec. 417.105(b), an operator is required to review personnel qualifications and issue individual certifications. The intent behind this requirement was to ensure that qualified people perform the required safety tasks. Neither part 431 nor part 435 have a personnel certification program requirement or any personnel training requirement; however, the need for personnel qualifications is a natural outcome of the system safety process. The FAA recognizes that the current regulations in part 417 are inflexible and that using a certification program is not the only method to ensure qualified personnel perform safety-critical tasks. Operators may use other methods to verify all training and experience required for personnel to perform a task is current. For example, an operator may maintain training records to document internal training and currency requirements or completion standards for its safety critical personnel. An operator's issuance of individual certifications does not itself enhance public safety. If the personnel are qualified through training and experience for each safety task performed, additional certification is unnecessary because no additional training is required for an individual to be issued a certification. Removing the certification requirement would also reduce cost to the industry by removing the two-step process to allow qualified personnel to perform safety-related tasks. Additionally, the flight safety crew roles and qualifications requirements in Sec. 417.311, are prescriptive. Section 417.311(a) requires a flight safety crew to document each position description and maintain documentation of individual crew qualifications, including education, experience, and training, as part of the personnel certification program of Sec. 417.105. Section 417.311(b) describes the roles of the flight safety crew and explicitly states subjects and tasks that the crew must be trained in and references the certification program. Finally, Sec. 417.311(c) requires the flight safety crew members to complete a training and certification program to ensure familiarization with launch site, launch vehicle, and FSS functions, equipment, and procedures related to a launch prior to being called on to support a launch. It also requires a preflight readiness training and certification program be completed and prescribes the content that must be included in such training. The current regulations are a burden to operators because they focus on FSSs and do not account for evolving technologies, including autonomous FSSs. Removing the prescriptive requirements in Sec. 417.311 and replacing them with performance-based requirements would alleviate this burden. The ARC recommends that the proposed regulation ensure that the applicant has a structure in place to protect public safety, and that the FAA use current requirements as guidelines for evaluation and approval when necessary. The FAA agrees that the regulations should ensure that personnel performing tasks that impact public safety are qualified to perform those tasks. As the industry grows and operations become more frequent and varied, operators need greater flexibility in operational practices. Employing a qualification program to ensure personnel performing safety-critical tasks are trained is one factor in protecting safety of public and public property. Therefore, the FAA proposes to remove the requirements for a certification program described in Sec. Sec. 415.113 and 417.105 and replace the prescriptive requirements of Sec. 417.311 with performance-based requirements that capture the intent of the current regulations--to ensure that an operator's safety-critical personnel are trained, qualified, and capable of performing their safety critical tasks, and that their training is current. Under proposed Sec. 450.149, an applicant would be required to identify in its application the safety-critical tasks that require qualified personnel and provide its internal training and currency requirements, completion standards, or any other means of demonstrating compliance with proposed Sec. 450.149(a). The proposed performance-based requirements would allow each operator to identify the safety-critical operations and personnel needed for the operation. It would also allow an operator to determine what training, experience, and qualification should be required for each safety-critical task. The FAA would consider any task that may have an effect on public safety and meets the definition of safety- critical found in Sec. 401.5 subject to the requirements of Sec. 450.149. These tasks would include, but are not limited to, operating and installing flight safety system hardware,

[[Page 15333]]

operating safety support systems, monitoring vehicle performance, performing flight safety analysis, conducting launch operations, controlling public access, surveillance, and emergency response. With the many different kinds of operations currently underway, an operator is in the best position to identify the operations, personnel, and training needed for its operation. The FAA would also require that an operator ensure personnel are qualified, and that those qualifications are current, without requiring certification. The regulation would require proper training of personnel and verification that each person performing safety critical tasks is qualified. Under Sec. 450.149, an applicant would be required to document all safety-critical tasks and internal requirements or standards for personnel to meet prior to performing the identified tasks during the application phase. The applicant would be required to provide internal training and currency requirements, completion standards, or any other means of demonstrating compliance with the requirements of Sec. 450.149 in its application. The applicant would also be required to describe the process for tracking training currency. In the event that a person's qualification was not current, either because their qualification does not meet the training currency requirements detailed in the application or because a new process or procedure has been instituted that has made the training inaccurate or incomplete, the individual would not be qualified to perform safety- related tasks specific to the expired qualification. Lastly, part 460 contains training and qualification requirements for flight crew. Compliance with these requirements would meet the training and qualification requirements in proposed Sec. 450.149 for flight crew. 3. Work Shift and Rest Requirements The FAA proposes to combine the rest requirements of Sec. Sec. 417.113(f) and 431.43(c)(4)(i) through (iv) into proposed Sec. 450.151 (Work Shift and Rest Requirements) which would require an applicant to document and implement rest requirements that ensure personnel are physically and mentally capable of performing tasks assigned. An applicant would be required to submit its rest rules during the application phase. Personnel involved in the launch or reentry of expendable and reusable vehicles need to be physically and mentally capable of performing their duties, especially those people making decisions or performing operations that affect public safety. Fatigue can degrade a person's ability to function and make the necessary decisions to conduct a safe launch or reentry operation. Since the FAA started requiring rest rules, there have been no incidents resulting from fatigue during a licensed launch or reentry. To maintain this level of safety, the FAA proposes to continue requiring rest rules in order to prevent fatigue and ensure operator personnel can perform their duties safely. A 1993 NTSB investigation of an anomaly that occurred during a commercial launch from a Federal launch range found a high probability that fatigue and lack of rest prior to launch operations contributed to mistakes that resulted in the vehicle initiating flight while the range was in a no-go condition.\95\ Launching in a no-go condition increases risk to the public because the vehicle operates outside of established boundaries and analysis. The NTSB found that the person who decided to proceed with the launch was not given enough time to rest after working extra hours the previous day. In addition, the launch was scheduled for early in the morning so the on-console time was around 2:00 a.m. The NTSB report recommended instituting rest rules that allow for sufficient rest before the launch operation. ---------------------------------------------------------------------------

\95\ Special Investigation Report: Commercial Space Launch Incident, Launch Procedure Anomaly Orbital Sciences Corporation, Pegasus/SCD-1, 80 Nautical Miles East of Cape Canaveral, Florida, February 9, 1993. Report PB 93-917003/NTSB/SIR93-02, July 23, 1993; (https://www.ntsb.gov/safety/safety-studies/Documents/SIR9302.pdf). ---------------------------------------------------------------------------

As a result of the 1993 NTSB report, the FAA issued rest rules in its 1999 final rule. The 1999 final rule required an applicant to ensure that its flight safety personnel adhere to Federal launch range rest rules. In its 2000 final rule for RLVs, the FAA required rest rules, in Sec. 431.43(c)(4), similar to the Air Force work and rest standards for launches and the FAA's ELV requirements.\96\ The specific and detailed requirements set forth in Sec. 431.43(c)(4) fail to account for the various factors that can affect crew rest such as the time of day of an operation, length of preflight operations, and travel to and from the launch or reentry site. ---------------------------------------------------------------------------

\96\ Section 431.43(c)(4) contains requirements that are detailed and prescriptive. It requires vehicle safety operations personnel to adhere to specific work and rest standards. These requirements prescribe the maximum length of workshift and the minimum rest period after such work shift preceding initiation of an RLV reentry mission or during the conduct of the mission. It also prescribes the maximum hours permitted to be worked in the 7 days preceding initiation of an RLV mission, the maximum number of consecutive work days, and the minimum rest period after 5 consecutive days of 12-hour shifts. ---------------------------------------------------------------------------

The 2006 final rule adopted the current Sec. 417.113(f), which is more performance-based than Sec. 431.43(c)(4). Section 417.113(f) requires that for any operation that has the potential to have an adverse effect on public safety, the launch rules must ensure that the launch crew is physically and mentally capable of performing all assigned tasks. It also requires those rules to govern the length, number, and frequency of work shifts, and the rest afforded to launch crew between shifts. The ARC recommended the FAA use the Sec. 417.113(f) approach as a basis for the proposed rest rules. The ARC recommended that the regulations should require each license applicant and operator to establish crew rest requirements applicable to their individual operation and suggested that the FAA consider each operator's rules through the application review and approval process. The FAA agrees with this approach. Additionally, the ARC suggested that the rest rules apply to specific personnel with direct control of the vehicle or launch or reentry decision making. While the FAA agrees with the intent of requiring all safety critical personnel to adhere to rest rules, it does not want to limit safety critical personnel to the roles the ARC identified because it is prescriptive and does not allow for operational flexibility. The FAA also agrees with the ARC that it is up to the company to monitor compliance with its rest rules. The FAA does not have an explicit requirement for an operator to monitor its employees, only that it documents and implements rest requirements. The FAA seeks comment on whether a specific requirement for operator monitoring would be necessary. Regardless, the FAA would monitor compliance on occasion with its inspection program, as it does today with current crew rest rules. The FAA recognizes that launch and reentry operations are varied. The FAA considered using prescriptive requirements like those in Sec. 431.43(c)(4) to address rest rules. However, there are many factors that can affect crew rest that make a prescriptive regulation impracticably complex and inflexible for allowing alternate methods of compliance that take into account mitigations and unique circumstances. Section 450.151 would retain the current performance-based requirements of Sec. 417.113(f) with modifications to include launch and reentry operations. The proposed requirements would cover operations of expendable, reusable, and reentry vehicles and allow an operator flexibility to employ rest rules that fit

[[Page 15334]]

the particular operations. Current Sec. 417.113(f) requires that crew rest rules govern the length, number, and frequency of work shifts, including the rest afforded the launch crew between shifts. Similarly, proposed Sec. 450.151(a) would require an operator to document and implement rest requirements that ensure safety-critical personnel are physically and mentally capable of performing all assigned tasks. Proposed Sec. 450.151(b) would provide additional requirements regarding the aspects of work shifts and rest periods critical to public safety, and would add a process for extending work shifts. Proposed Sec. 450.151(b)(1) would require an operator's rest rules to include the duration of each work shift and the process for extending this shift; including the maximum allowable length of any extension. This requirement would provide each operator with the flexibility to identify the duration of each work shift most suited to the operation such that safety-critical personnel are physically and mentally capable of performing all assigned tasks. It would also require a process for extending a work shift. Work shift length is important because performance decreases and fatigue increases as the length of the work shift increases. An operator should determine the optimum length for a work shift that ensures personnel are capable of performing their assigned tasks. Unforeseen circumstances can require personnel to work beyond the established work shift length. In such cases, under this proposal, the operator would be required to have a process for extending the work shift length up to a limit where personnel are no longer considered capable of performing their duties. Proposed Sec. 450.151(b)(2) would require an operator's rest rules to include the number of consecutive work shift days allowed before rest is required. This requirement would provide each operator with the flexibility to identify the number of consecutive work shift days safety-critical personnel may work such that they remain physically and mentally capable of performing all assigned tasks. Proposed Sec. 450.151(b)(3) would require an operator's rest rules to include the minimum rest period required between each work shift, including the period of rest required immediately before the flight countdown work shift. An operator would also be required to identify the minimum rest period required after the maximum number of work shift days allowed. Having enough rest between work shifts is important to ensure personnel are able to perform critical tasks. The rest period before a countdown is particularly important because it can be affected by time of launch, reviews, and work needed to get a vehicle ready for operation. The FAA also proposes to remove the term ``crew'' from the rest requirements. The use of ``crew'' can be misleading and limiting. Operators could interpret crew to be flight crew only, whereas the rest rules are intended to apply to any position affecting public safety. Under this proposal, an applicant would be required to submit rest rules to the FAA that demonstrate compliance with proposed Sec. 450.151. The FAA would evaluate an operator's rest rules in the same way as it currently does under Sec. 417.113(f) to ensure that personnel affecting public safety are mentally and physically capable of performing their duties during launch or reentry operations, and that the rest rules satisfy the requirements of proposed Sec. 450.151. While an operator would be able to create its own rest rules under proposed Sec. 450.151, an applicant would also be able to use current rest rules. That is, Sec. 431.43(c)(4) would be an acceptable means of compliance to proposed Sec. 450.151. The FAA would evaluate other rest rules against this benchmark and relevant standards. 4. Radio Frequency Management The FAA proposes to maintain the current substantive requirements of Sec. 417.111(f) for radio frequency management and to expand the applicability of these requirements to RLVs and reentry vehicles in proposed Sec. 450.153 (Radio Frequency Management). The FAA also would remove the current requirements to implement a frequency management plan and to identify agreements for coordination of use of radio frequencies with any launch site operator and local and federal authorities. Under Sec. 415.119 and appendix B of part 415, an applicant for a launch license is required to include a frequency management plan \97\ in its application, and that plan must satisfy the requirements of Sec. 417.111(f). Specifically, current Sec. 417.111(f) requires an operator to implement a frequency management plan that identifies each frequency, all allowable frequency tolerances, and each frequency's intended use, operating power, and source. The plan must also provide for the monitoring of frequency usage and enforcement of frequency allocations and identify agreements and procedures for coordinating use of radio frequencies with any launch site operator and any local and Federal authorities, including the FCC. ---------------------------------------------------------------------------

\97\ A radio frequency management plan describes how an operator manages radio frequencies to meet termination or tracking requirements. ---------------------------------------------------------------------------

While parts 431 and 435 do not contain explicit frequency management requirements, an operator is required to identify and mitigate hazards, including hazards associated with frequency management as part of the system safety process in Sec. 431.35(c) and (d). Section 431.35(c) requires operators to perform a hazard analysis and identify, implement, and verify mitigations are in place.\98\ ---------------------------------------------------------------------------

\98\ One such hazard is radio interference that could disable a commanded FSS. An operator might mitigate such a hazard by ensuring that the power level of the command transmitter is sufficient to ensure termination with high reliability (i.e., 0.999 at 95 percent). For reentry vehicles, radio frequencies for tracking are coordinated to ensure there is coverage where needed as well as communication with the vehicle. ---------------------------------------------------------------------------

Section 450.153 would replace the current requirement in Sec. 417.111(f) to implement a frequency management plan. In proposed Sec. 450.153(a), the FAA proposes to make these radio frequency management requirements applicable to any radio frequency used. This proposed requirement would include radio frequencies used not only in launch vehicles, but also in RLVs and reentry vehicles. Because radio frequency requirements are a mitigation for hazards associated with frequency management, the proposed requirements would not necessarily be new requirements for RLVs or reentry vehicles but would codify the need for radio frequency management for RLVs and reentry vehicles. The FAA also proposes to maintain the substantive radio frequency requirements of current Sec. 417.111(f) in proposed Sec. 450.153(a). Although the increased use of autonomous termination systems makes frequency management less critical for flight termination, there are still many operators that use command termination systems. Moreover, these requirements remain applicable to autonomous termination systems because operators still need to allocate radio frequencies to telemetry and tracking. There are also other hazards, such as electromagnetic interference and induced currents, that can result from radio frequency interference and that require mitigation. Therefore, an operator would continue to be required to: (1) Identify each frequency, all allowable frequency tolerances and each frequency's intended use, operating power and source; (2) provide for monitoring of frequency usage and enforcement of frequency allocations; and (3)

[[Page 15335]]

coordinate the use of radio frequencies with any site operator and any local and Federal authorities. While no substantive changes are proposed to the radio frequency requirements, this proposal would remove the current requirement that an operator's frequency management plan identify agreements and procedures for coordinating the use of radio frequencies with any launch site operator and any local or federal authorities. Many of the agreements necessary for radio frequency management would be covered in proposed Sec. 450.147. In proposed Sec. 450.153(b), an applicant would be required to submit procedures or other means to demonstrate compliance with the requirements of Sec. 450.153(a) as part of its application. This requirement would provide an applicant flexibility in the manner of demonstrating compliance, such as using checklists or continuing to use a frequency management plan. 5. Readiness: Reviews and Rehearsals The FAA proposes to revise and consolidate the readiness requirements of parts 417 and 431 into a performance-based regulation that would require an operator to document and implement procedures to assess readiness to proceed with the flight of a launch or reentry vehicle. The FAA currently requires an operator to be ready to perform launch or reentry operations. Readiness, which is currently addressed through readiness reviews and rehearsals, has three components-- readiness of the vehicle, of the personnel, and of the equipment. In consolidating these parts, the FAA proposes to remove the current requirements to conduct rehearsals, to poll the FAA at the launch readiness review, and to provide a signed written decision to proceed. The FAA also proposes to eliminate the specific review requirements of Sec. Sec. 417.117 and 431.37. Launch rates have increased substantially since the adoption of parts 417 and 431. In 2007, an operator might only launch one to three times a year. Currently, there are operators that have launch rates exceeding 20 launches per year. Readiness requirements have become overly burdensome as operators spend time on rehearsals and reviews that were meant to ensure readiness. Timing requirements have resulted in additional reviews or non-compliances. Operators in a high launch rate environment may not benefit much from rehearsals and added reviews. Currently, Sec. 417.117 requires that a launch operator (1) review the status of operations, systems, equipment and personnel required by part 417, (2) maintain and implement documented criteria for successful completion of each review, (3) track and document corrective actions or issues identified during the review, and (4) ensure that launch operator personnel overseeing the review attest to successful completion of the reviews criteria in writing. Section 417.117(b)(3) requires an operator to conduct a launch readiness review for flight within 48 hours of flight. The decision to proceed with launch must be in writing and signed by the launch director and any launch site operator or Federal launch range. The launch operator must also poll the FAA to verify that the FAA has not identified any issues related to the launch operator's license. For RLV operations, Sec. 431.37 requires an applicant to submit procedures that ensure readiness of the vehicle, personnel, and equipment as part of the application process. These procedures must involve the vehicle safety operations personnel and the launch site and reentry site personnel involved in the mission. The procedures must include a mission readiness review and specify that the individual responsible for the conduct of the licensed activities is provided specific information upon which he or she can make a judgement as to mission readiness. Additionally, as part of the readiness requirements, Sec. 417.119 requires an operator to rehearse its launch crew and systems to identify corrective actions necessary to ensure public safety that cover the countdown, communications, and emergency procedures, and it specifically directs the launch operator in how to conduct its rehearsals. Section 431.33(c)(1) similarly requires an applicant to monitor and evaluate operational dress rehearsals to ensure they are conducted in accordance with procedures required by Sec. 431.37 to ensure the readiness of vehicle safety operations personnel. The requirements of both parts 417 and 431 are prescriptive and do not provide an operator with much flexibility as to compliance. The lack of flexibility is evidenced by the issuance of waivers and documentation of non-compliances. This requirement has created a burden on operators because they must spend extra resources requesting waivers and responding to enforcement actions. Processing waivers and conducting additional reviews costs time and money for the FAA, as well. For example, Sec. 417.117(b)(3) requires a flight operator to hold a launch readiness review no earlier than 48 hours before flight. Since 2007, the FAA has processed over 20 waivers to the 48-hour requirement. In situations where ELV operators have not requested a waiver to the timing requirement, they have held additional reviews just to meet the timing requirement of the flight readiness review. Additionally, the FAA has issued at least three enforcement letters because operators did not meet the timing requirement. The ARC recommended that the FAA distill reviews down to intent, list the minimum items the FAA reviews, and let the operator inform the FAA in the license application where those items are and how they would be reported. The FAA agrees that specific reviews are not required and proposes a list of items required to address readiness. The FAA also agrees that specific rehearsals are not required because there are a variety of methods by which an operator could meet readiness requirements. As discussed later, the FAA proposes to remove the specific requirement for rehearsals. The FAA proposes to revise and consolidate the readiness requirements of parts 417 and part 431 into proposed Sec. 450.155, which would require an operator to document and implement procedures to assess readiness to proceed with the flight of a launch or reentry vehicle. The FAA anticipates that under this proposal an operator would be able to achieve readiness by various methods including, but not limited to, readiness meetings, tests, rehearsals, static fire tests, wet dress rehearsals,\99\ training, and experience. ---------------------------------------------------------------------------

\99\ A wet dress rehearsal includes at least a partial fueling of a vehicle with a liquid propellant. ---------------------------------------------------------------------------

While current regulations require specific readiness reviews, proposed Sec. 450.155 (Readiness) would remove the requirement for flight readiness reviews, including the requirements for a launch readiness review no earlier than 15 days before flight and the flight readiness review no earlier than 48 hours before flight. The FAA proposes to remove these requirements because it has found that multiple readiness reviews may not be necessary to demonstrate readiness. For instance, readiness can be determined by a single meeting close enough in time to the launch or reenty to ensure there have been no material changes to readiness, such as failure of a radar or telemetry system. Under the proposed rule, it would be up to the operator to propose how it would ensure readiness, and whether such procedures would include one or more readiness reviews, testing, or some other means. By eliminating the timing requirements, operators with high launch rates could propose how they

[[Page 15336]]

will ensure they are ready for launch and whether that involves one or more readiness reviews held close enough in time to the launch to ensure no significant changes occur between the review and the launch. Removing the specific requirements for reviews and tests would not relieve the operator from having to perform a test or hold a review that is necessary for determining readiness, rather it would provide the operator with flexibility to develop and propose those tests and reviews most suitable for the operation in order to ensure readiness. The FAA would evaluate and make a determination on the adequacy of the proposed procedures during the licensing process. The FAA plans to publish a draft means-of-compliance guide with the publication of the proposed rule, which should include acceptable approaches. In the long term, the FAA plans to refer to an AC or standard for every performance-based requirement. Instead of requiring specific readiness reviews, proposed Sec. 450.155 would require that an operator document and implement procedures to assess readiness to proceed with the flight of a launch or reentry vehicle. As part of the application requirements, the operator would be required to demonstrate compliance with the requirements of proposed Sec. 450.155 through procedures that may include a readiness meeting close in time to flight. Unlike Sec. Sec. 417.117 and 431.37, proposed Sec. 450.155 would not specify particulars of what the procedures must contain. However, the operator would be required to document and implement procedures that at a minimum address: (1) Readiness of vehicle and launch, reentry, or landing site, including any contingency abort location; (2) readiness of safety-critical personnel, systems, software, procedures, equipment, property and services; and (3) readiness to implement a mishap plan. The FAA proposes to require that the procedures address these particular areas because the FAA has determined that a safe launch or reentry, at a minimum, requires the vehicle, site, and safety personnel to be ready and all safety systems and safety support equipment to be working properly. Additionally, being prepared to implement a mishap plan would ensure that public safety is maintained during a mishap because personnel would be familiar with their roles and ready to perform their duties in order to return the vehicle and site to a safe condition after the mishap. The FAA also proposes to remove the requirement that an operator poll the FAA at the launch readiness review and provide a signed certificate of the decision to proceed contained in Sec. 417.117. This polling is unnecessary because the FAA will always inform the operator of any licensing issues as soon as the FAA becomes aware of them. The FAA also proposes to remove the requirement that an operator provide a signed certificate of the decision to proceed with launch or reentry operations because the FAA has not used any signed certificate required under Sec. 417.117 for any launch or reentry. All the certificates have been filed and have not served any purpose other than to comply with the requirement under Sec. 417.117. The FAA believes that removing the requirements to poll the FAA and to have a signed certificate to proceed would not affect public safety and would relieve burdens to comply with those requirements from the operator and the FAA. The FAA proposes to remove the requirements in Sec. 417.119 because rehearsals are not always needed to achieve readiness. It is important that the launch team be familiar with operations. Rehearsals are a good way to ensure proficiency with procedures, exercise communications and critical safety positions as a team, and identify areas where the operator needs to improve. However, the FAA acknowledges that rehearsals are not the only way to ensure the readiness performance requirement is met. This proposal would allow an operator to determine what methods would be best suited to ensure readiness for its operation. Operators that have high launch rates may not need to rehearse personnel that were involved in a similar launch days or weeks earlier. However, licensees that have not launched for a long time or that are launching for the first time may need rehearsals to meet some of the readiness requirements. Operators with high launch rates could demonstrate readiness with a readiness review and would not have to hold rehearsals, and training could fill gaps where actual operations do not provide familiarity with certain aspects of operations. For example, if no anomalies are experienced during actual operations, the operator could hold a rehearsal or provide additional training to exercise the anomaly resolution process. Current Sec. 417.117(b)(3)(xi) requires an operator to review launch failure initial response actions and investigation roles and responsibilities and Sec. 417.119(c) requires an operator to have a mishap plan rehearsal; current Sec. 431.45 contains the requirements for a mishap plan for RLVs. Section 450.155(a)(3) would require an operator to document and implement procedures to ensure readiness to implement a mishap plan in the event of a mishap. The proposal would allow flexibility to meet the readiness requirement for implementing a mishap plan by allowing an operator to propose a procedure acceptable to the FAA. Thus, an operator would have the ability to develop procedures to ensure readiness through training, rehearsals, or other means that might be more applicable to its vehicle and mission. The FAA would still expect an operator to review any lesson learned, corrective action, or changes to procedures resulting from any mishap plan rehearsals or mishap investigations. Under Sec. 450.155(b), an applicant would need to demonstrate compliance with the requirements through procedures that may include a readiness meeting close in time to flight and describe the criteria for establishing readiness to proceed with the flight of a launch or reentry vehicle. 6. Communications Currently, the FAA requires operators to implement communications plans to ensure that clear lines of authority and situational awareness are maintained during countdown operations. The communications plan was the result of a 1993 NTSB investigation discussed earlier. One of the contributing factors identified in the investigation was the lack of clear communications between different ranges and the operator. The FAA requirements for communications plans are currently found in Sec. Sec. 417.111(k) and 431.41 and are nearly identical. Currently, Sec. Sec. 417.111(k) and 431.41 require an operator to implement a communications plan. Part 435 requires a reentry vehicle operator to comply with the safety requirements of part 431, including Sec. 431.41. Both Sec. Sec. 417.111(k) and 431.41 require an operator's communications plan to define the authority of personnel, by individual or position title, to issue ``hold/resume,'' ``go/no-go,'' and abort commands; assign communication networks so that personnel have direct access to real-time safety-critical information required to issue ``hold/ resume,'' ``go/no-go,'' and any abort decisions and commands; ensure personnel monitor common intercom channels during countdown and flight; and implement a protocol for using defined radio telephone communications terminology. Additionally, Sec. 431.41(b) requires that the applicant submit procedures to ensure that the licensee and reentry site personnel receive copies of the communications plan, and that the reentry site operator concurs with the plan. For launches from a Federal

[[Page 15337]]

launch range, Sec. 417.111(k) also requires the Federal launch range to concur with the communications plan. Operators launching from Federal launch ranges comply with Sec. 417.111(k). Operators submit a communications plan during the application process and coordinate with the Air Force. The communications plan includes lines of authority, identification of who has access to which channels, protocols for communication and procedures for decision processes. Often, the communication plan is not fully developed at the time the operator applies for a license, so operators often submit a representative plan during the application process and then provide a final plan prior to the first launch under a license. The FAA proposes to retain the substantive communications requirements in Sec. Sec. 417.111(k) and 431.41 in Sec. 450.157 (Communications), in paragraph (a), and remove the specific requirement to implement a communications plan. Section 450.157(b) would also require an operator to ensure currency of the communication procedures, similar to the current requirement in Sec. 417.111(e). The FAA would preserve these requirements because all key participants must work from the same communications procedures in order to avoid miscommunication that could lead to a mishap.\100\ ---------------------------------------------------------------------------

\100\ NTSB Special Investigation Report: Commercial Space Launch Incident, Launch Procedure Anomaly Orbital Science Corporation, Pegasus/SCD-1, 80 Nautical Miles East of Cape Canaveral, Florida (February 9, 1993); at p. 53. ---------------------------------------------------------------------------

Section 450.157(c) would require an operator during each countdown to record all safety-critical communications network channels that are used for voice, video, or data transmissions to support safety-critical systems. This is substantially the same requirement as in Sec. Sec. 417.111(l)(5)(vii) and 431.41. The FAA would retain this requirement because communications recording is often critical to mishap investigations. Lastly, the FAA would not require operators to submit communication procedures during the application process because generally such procedures are not mature at the time of application, and hence are unlikely to be the ones used during the actual countdown. Under the proposal, the FAA would not approve the communications procedures prior to licensing and would rely instead on an inspection process that ensures the operator is following the requirements for communications procedures. These inspections would be consistent with current practice, where FAA inspectors often review the operator's final communications procedures. Given that the FAA would no longer require demonstrations of compliance at the application stage for communications and preflight procedures, operators may be required to make revisions to those procedures to resolve issues identified during compliance monitoring. 7. Preflight Procedures Under Sec. 417.111(l), an operator is required to develop and implement a countdown plan that verifies each launch safety rule and launch commit criterion is satisfied, personnel can communicate during the countdown, the communication is available after the flight, and a launch operator will be able to recover from a launch abort or delay. This countdown plan must cover the period of time when any launch support personnel are required to be at their designated stations through initiation of flight. It also must include procedures for handling anomalies that occur during countdown and any constraints to initiation of flight, for delaying or holding a launch when necessary, and for resolving issues. It must identify each person by position who approves the corrective actions, and each person by position who performs each operation or specific action. It also must include a written countdown checklist that must include, among other items, verification that all launch safety rules and launch commit criteria have been satisfied. In case of a launch abort or delay, the countdown plan must identify each condition that must exist in order attempt another launch, including a schedule depicting the flow of tasks and events in relation to when the abort or delay occurred and the new planned launch time, and identify each interface and entity needed to support recovery operations. Currently Sec. 415.37(a)(2) requires that the applicant file procedures that ensure mission constraints, rules and abort procedures are listed and consolidated in a safety directive or notebook. Similarly, the mission readiness requirements of Sec. 431.37(a)(2) require that procedures that ensure mission constraints, rules, and abort plans are listed and consolidated in a safety directive notebook. Currently some operators have paper notebooks containing all the checklists and countdown plans. These notebooks are updated frequently, even up to the day before a launch with change pages by every member of the launch team. This process can sometimes lead to confusion and configuration issues. Other operators have electronic systems that contain all the checklists and countdown procedures. There are many advantages to electronic records, such as ease of dissemination and configuration control. As electronic file use becomes more common, the need for a physical notebook becomes unnecessary. What is critical for safety is that all launch personnel have the same set of procedures. Due to the dynamic nature of countdown procedures, operators provide checklists and procedures used in prior launches to meet the application requirements. The FAA evaluates these checklists and procedures during the license evaluation. However, because the checklists and procedures being evaluated are not final, operators must submit all updates to these documents as part of the continuing accuracy of the license requirements. FAA inspectors ensure the checklists and procedures are the most current, and that configuration control is maintained. The FAA proposes to streamline the current countdown procedures and requirements in Sec. Sec. 415.37(a)(2), 417.111(l), and 431.39(a)(2) and replace them in Sec. 450.159 (Preflight Procedures). In doing so, the FAA proposes to remove the requirements for safety directives or safety notebooks and for a countdown plan, and the requirement to file such plans because there are many methods of documenting the preflight procedures that do not involve a plan or notebook. Although the proposed preflight procedures would not be required to be submitted as part of the license application process, FAA inspectors would still ensure that such preflight procedures are implemented. Unlike the current regulations, the FAA proposes a performance- based requirement where an operator would need to implement preflight procedures would verify that all flight commit criteria are satisfied before flight and that ensure the operator is capable of returning the vehicle to a safe state after a countdown abort or delay.\101\ This aligns with the intent of current regulations while permitting flexibility on how the safety goal is achieved. As a result, there would be no impact on safety resulting from the removal of the current prescriptive requirements. ---------------------------------------------------------------------------

\101\ A countdown abort includes launch scrubs, recycle operations, hang-fires, or any instance in which the launch vehicle does not lift-off after a command to initiate flight has been sent. ---------------------------------------------------------------------------

Additionally, proposed Sec. 450.159(b) would require an operator to ensure the currency of the preflight procedures, and that all personnel are working with the approved version of the preflight

[[Page 15338]]

procedures, similar to the current requirement in Sec. Sec. 415.37(a)(3) and 431.39(c). The FAA would preserve these requirements because all key participants must work from the same preflight procedures in order to avoid a mishap. The FAA anticipates that the current requirements of Sec. 417.111(l)(1) through (6) would be a means of compliance under the proposal, but not the only means of compliance. By allowing alternative means of compliance, the proposed regulations would provide greater operational flexibility and procedure streamlining across all operation types. 8. Surveillance and Publication of Hazard Areas The FAA proposes to adopt surveillance of a flight hazard area regulations based on recent granted waivers and to better align with current practices at the Federal launch ranges, where most commercial launches take place, and to codify current practice that eliminates unnecessary launch delays while maintaining public safety. This proposal would only alter the substantive requirements applicable to the surveillance of ship (waterborne vessel) hazard areas not the surveillance of land or aircraft hazard areas. Therefore, this discussion will focus primarily on the proposal's effect on the surveillance of waterborne vessel hazard areas. The specific requirements for conducting a flight hazard area analysis are discussed later in the preamble. Current regulations on establishing and surveilling hazard areas, including ship hazard areas, for ELVs are found in Sec. Sec. 417.205 \102\ and 417.223 \103\ and part 417, appendix B.\104\ Part 431 does not set explicit requirements for the surveillance of waterborne vessel hazard areas, and the FAA has not yet issued a license under part 431 over water. However, both Sec. Sec. 417.107(b)(2) and 431.35(b)(1)(ii) require that an operator ensure all members of the public are cleared of all regions, whether land, sea, or air, where any individual would be exposed to more than 1 x 10-6 PC. Although not explicit, the current regulations for ELV and RLV operations effectively require surveillance and evacuation of all regions where the individual risk criterion would be violated by the presence of any member of the public. ---------------------------------------------------------------------------

\102\ Section 417.205 requires the flight safety analysis to employ risk assessment, hazard isolation, or a combination of risk assessment and partial isolation of the hazards to demonstrate control of risk to the public. \103\ Section 417.223 requires, in part, that an FSA include a flight hazard area analysis that identifies any regions of land, sea, or air that must be surveyed, publicized, controlled, or evacuated in order to control the risk to the public from debris impact hazards. \104\ Section B417.5(a) of appendix B to part 417 states that a launch operator must perform a launch site hazard area analysis that protects the public, aircraft, and ships from the hazardous activities in the vicinity of the launch site. ---------------------------------------------------------------------------

The net effects of the current ELV regulations are: (1) An operator must establish a ship hazard area sufficient to ensure the PI for any ship does not exceed 1 x 10-5 for any debris that could cause a casualty, (2) an operator must monitor the ship hazard area prior to initiating the flight operation, and (3) if a large enough ship enters the waterborne vessel hazard area to exceed the 1 x 10-5 PI criterion, then the launch must be scrubbed or delayed until the ship exits the hazard area. Appendix B to part 417 directs a launch operator to evacuate and monitor each launch site hazard area to ensure compliance with the risk criteria in Sec. 417.107(b)(2) and (3) and provide an adequate methodology to achieve this end. The FAA designed this methodology to be consistent with Air Force range safety requirements in 2006 and to ensure that the cumulative PI to any ships would not exceed 1 x 10-5 for any debris expected to exceed the kinetic energy or overpressure thresholds established by Sec. 417.107(c). Current Sec. 417.223(b) requires public notices for flight hazard areas. A flight hazard area analysis must establish the ship hazard areas for notices to mariners that encompass the three-sigma impact dispersion area for each planned debris impact.\105\ Section 417.121(e) contains procedural requirements for issuing notices to mariners (and airmen). Furthermore, Sec. 417.111(j) requires a launch operator to implement a plan that defines the process for ensuring that any unauthorized persons, ships, trains, aircraft or other vehicles are not within any hazard areas identified by the FSA or the ground safety analysis. In the plan, the launch operator must list each hazard area that requires surveillance to meet Sec. Sec. 417.107 and 417.223, as well as describe how the launch operator will provide for day-of-flight surveillance of the flight hazard area to ensure that the presence of any member of the public in or near a flight hazard area is consistent with flight commit criteria developed for each launch. In practice, these regulations have been comprehensive enough to ensure public safety, but at times overly prescriptive and unduly conservative. ---------------------------------------------------------------------------

\105\ In addition, a flight hazard area analysis must establish the aircraft hazard areas for notices to airmen that encompass the 3-sigma impact dispersion volume for each planned debris impact. ---------------------------------------------------------------------------

The FAA has waived several waterborne vessel protection requirements \106\ in light of advanced ship monitoring technology and risk calculation models. The FAA's first waiver of the Sec. 417.107(b)(3) requirement illustrates the need for this proposed change.\107\ In approving the first waiver and numerous subsequent waivers to enable the proposed option, the FAA assessed the technological advances previously discussed. In this assessment, the FAA reviewed the Federal launch range input data and probabilistic casualty models that the Air Force at the 45th Space Wing uses to quantify individual and collective risks to people on waterborne vessels during the launch countdown for space launch missions. The FAA found that the 45th Space Wing's public risk analyses use accurate data and scientific methods that are mathematically valid, with reasonably conservative assumptions applied in areas where significant uncertainty exists. In that instance, the FAA performed independent analyses using alternative methods to estimate the casualty risks for multiple foreseeable scenarios involving debris impacts on various types of waterborne vessels and found that large passenger vessels anywhere between the launch point and the first stage disposal zone can contribute significantly to the estimated EC from a launch. The FAA also found that small boats (too small to have Automatic Identification System (AIS) required \108\) located close to the launch point should not produce significant individual risks. However, no past waivers involved changes in the areas where surveillance was mandatory in current practice, only where ships were allowed to be present in order for the launch to proceed. ---------------------------------------------------------------------------

\106\ For example, see Waivers of Ship Protection Probability of Impact Requirement, 81 FR 28930 (May 10, 2016). \107\ 81 FR 28930 (May 10, 2016). \108\ AIS is required on commercial vessels 65 feet in length or more, towing vessels 26 feet in length or more, and other self- propelled vessels certified to carry more than 150 passengers or carrying dangerous cargo. ---------------------------------------------------------------------------

Section 450.161 (Surveillance and Publication of Hazard Areas) would require an operator to publicize, survey, and evacuate each flight hazard area before initiating flight or reentry, to the extent necessary to ensure compliance with proposed Sec. 450.101. Proposed Sec. 450.161(a) does not change the need for surveillance relative to the current requirements in parts 417 or 431 for people on land or aircraft because the proposal would continue to require that

[[Page 15339]]

an operator ensure all regions where any individual member of the public would be exposed to more than 1 x 10-6 PC are evacuated. However, the proposal would remove the requirement to evacuate and monitor areas where a waterborne vessel would be exposed to greater than 1 x 10-5 PI currently required by Appendix B to part 417, paragraph 417.5(a). The FAA proposal to include people on ships in the collective risk computation (see proposed Sec. 450.101(a)(1) and (b)(1)) would explicitly allow the application of risk management principles to protect people on waterborne vessels. For example, an applicant could apply conservative estimates of the ship traffic and vulnerability to demonstrate acceptable public risks. In proposed Sec. 450.161(a), surveillance would only be required to the extent necessary to ensure compliance with the public safety criteria, including individual and collective risks as well as notification of planned impacts from normal flight events capable of causing a casualty. For instance, an operator would not need to perform surveillance of areas where the risk to any individual would be no more than 1 x 10-6 PC, unless surveillance was necessary to ensure acceptable collective risks. The proposal would generally allow operators the option to use the current approach in part 417, where surveillance is required to ensure no ship is exposed to more than 1 x 10-5 PI, because that would generally be sufficient to ensure compliance with proposed Sec. 450.101. In addition, the proposal would also provide the option for launch and reentry operators to use the new technology, including modern surveillance techniques, and include people in waterborne vessels as part of the collective risk calculation as approved by previous waivers.\109\ Current practice is to issue waivers to operators as an alternative to scrubbing or delaying a launch or reentry due to waterborne vessels in an area where the PI exceeds 1 x 10-5. Thus, the proposal would curtail the need for waivers. ---------------------------------------------------------------------------

\109\ 81 FR 28930 (May 10, 2016). ---------------------------------------------------------------------------

While the proposal would relax the current part 417 requirement to ensure that no ship is exposed to more the 1 x 10-5 PI, the FAA notes that the requirement to ensure no ships are present in areas where the individual risk exceeds 1 x 10-6 PC is consistent with international guidelines. The International Maritime Organization (IMO) is the United Nations organization for safety and environmental protection regulations for maritime activities. The IMO has developed a risk-based approach to safety and environmental protection regulations, which identifies a key threshold of one in a million (1 x 10-6) probability of fatality per year for individual crewmembers, passengers, and members of the public ashore (considered third parties by the IMO). The IMO guidelines equate individual risks at the 1 x 10-6 probability of fatality per year as broadly acceptable for maritime activities, and specifically state that individual risks below this level are negligible and no risk reduction required. The proposed Sec. 450.101(a)(2) and (b)(2) requirements would ensure that no person will be present on ships where the individual risk exceeds 1 x 10-6 PC . This requirement is consistent, and reasonably conservative, with respect to the IMO guidelines as explained in the RCC 321-07 Supplement.\110\ Thus, the FAA proposes to codify requirements for the development and surveillance of ship hazard area that are reasonably consistent with IMO guidelines for formal safety assessments. ---------------------------------------------------------------------------

\110\ Range Commanders Council Risk Committee of the Range Safety Group, Common Risk Criteria for National Test Ranges: Supplement. RCC 321-07 Supplement, White Sands Missile Range, New Mexico, 2007, p. 5-50. ---------------------------------------------------------------------------

As previously discussed, there were important advances in ship surveillance techniques in recent years. In the past, observation techniques posed significant risks to launch operators. For example, the only known deaths related to launch operations at Cape Canaveral were five occupants of a helicopter that crashed at sea shortly after 2 a.m. on April 7, 1984, while flying surface surveillance for the scheduled launch of a Trident 1 missile from the USS Georgia.\111\ In many cases, the proposal would relieve the requirement for the type of surveillance that posed significant risks to launch operators in the past. ---------------------------------------------------------------------------

\111\ Air Force News Print Today (Apr. 8, 2011). ---------------------------------------------------------------------------

Section 450.161(b) would require surveillance sufficient to verify or update the assumptions, input data, and results of the flight safety analyses. Given there are numerous assumptions and input data that are critical to the validity of the flight safety analyses, this requirement could have a variety of surveillance implications beyond the surveillance necessary to ensure the public exposure at the time of the operation is consistent with the assumptions and input data for the flight safety analyses. For example, an FSA could assume that a jettisoned stage remains intact to impact or breaks up into numerous pieces that are all capable of causing casualties to people in a class of aircraft (e.g., business jets). An operator would be required to employ some type of surveillance (e.g., telemetry data, or remote sensors such as a camera or radar) to verify that the jettisoned stage behaves as assumed by the FSA if that behavior is germane to the size of the aircraft hazard area. Additionally, Sec. 450.161(c) would require an applicant to publicize warnings for each flight hazard area, except for regions of land, sea, or air under the control of the vehicle or site operator or other entity by agreement. If the operator relies on another entity to publicize these warnings, the proposal requires the operator to verify that the warnings have been issued. The FAA notes that some operators already follow this practice. The proposed requirements would allow warnings that are consistent with current practice but would also allow more flexibility for warnings to mariners in accordance with proposed Sec. 450.133(b). Notably, Sec. 450.133(b)(1) would be consistent with current practice at the Federal launch ranges based on input from the CSWG, and Sec. 450.133(b)(2) and (3) are based on current U.S. Government consensus standards).\112\ Proposed Sec. 450.161(d) would also require an applicant to describe how it will provide for day-of- flight surveillance of flight hazard areas, if necessary, to ensure that the presence of any member of the public in or near a flight hazard area is consistent with flight commit criteria developed for each launch or reentry. ---------------------------------------------------------------------------

\112\ RCC 321-17 Standard. ---------------------------------------------------------------------------

This proposal is consistent with the executive branch policy to replace prescriptive requirements with performance-based criteria.\113\ Specifically, the FAA proposes to replace the ``one-size-fits-all'' approach to ship protection that effectively prevents launch or reentry operations to proceed if ships are in identified hazard areas irrespective of the estimated risks posed to people on those vessels. For example, during the launch of the Falcon 9 from CCAFS to deliver the SES-9 payload to orbit, SpaceX was delayed by the presence of a tug boat towing a large barge inside the ship hazard area in compliance with the FAA's requirement in Sec. 417.107(b) to limit the PI for waterborne vessels to 1 x 10-5.\114\ Under the proposal, delays such as this would be avoided without the need for waivers. The FAA proposes to replace the ``one-size-fits-all'' approach with the performance-based criteria of the collective and individual

[[Page 15340]]

risk limits in proposed Sec. 450.101, and in doing so would require an operational delay only when necessary to ensure acceptable individual and collective risks. This approach was safely and successfully used, by waiver, for all Falcon 9 launches from the CCAFS and KSC starting in 2016. The FAA seeks comment on the proposed approach. ---------------------------------------------------------------------------

\113\ SPD-2 (May 24, 2018), at Section 2b. \114\ 81 FR 28930 (May 10, 2016). ---------------------------------------------------------------------------

Application of public risk management for the protection of people in waterborne vessels has the potential for reducing launch costs by reducing the number of operational delays and scrubs due to ships in areas where the individual and collective risks are nevertheless acceptable. Because it is a major procurer of launch services, reduced launch costs would be of direct benefit to the U.S. Government. It would also help to make the U.S. launch industry more competitive internationally by reducing launch delays and scrubs. 9. Lightning Hazard Mitigation The FAA proposes to remove appendix G to part 417 and replace it with the performance-based requirements of Sec. 450.163 (Lightning Hazard Mitigation). The current requirements in appendix G to part 417 are outdated, inflexible, overly conservative, and not explicitly applicable to many RLVs and reentry vehicles. Lightning is an atmospheric discharge of electricity, and can either occur naturally or be ``triggered.'' Triggered lightning can be initiated as a result of a launch vehicle and its electrically- conductive exhaust plume passing through a strong pre-existing electric field.\115\ However, the triggering phenomenon is unpredictable because there are many conditions that must occur in order for the breakdown of the electric field resulting in a lightning strike to occur. One condition is the enhancement factor of the launch or reentry vehicle that acts as a conductor. The extremities of the vehicle, such as the nose radius of curvature coupled with the effective length of the vehicle (taking into account the plume length) will establish the viability of a lightning strike. Furthermore, a launch vehicle's propellants will have different conductivity characteristics, leading to varying lengths; \116\ as a result, not every vehicle will trigger a lightning strike under the same environmental conditions. This unpredictability is exacerbated further by the fact that a triggered lightning strike can occur even when the vehicle is penetrating a benign cloud, or is outside a cloud that is not producing lightning. ---------------------------------------------------------------------------

\115\ Roeder, William P. and Todd M. McNamara, A Survey Of The Lightning Launch Commit Criteria, American Meteorological Society, Aviation Range and Meteorology Conference. \116\ E. P. Krider, M. C. Noogle, M. A. Uman, and R. E. Orville. ``Lightning and the Apollo 17/Saturn V Exhaust Plume,'' Journal of Spacecraft and Rockets, Vol. 11, No. 2 (1974), p. 72-75. ---------------------------------------------------------------------------

Lightning can and has caused or necessitated the destruction of launch and reentry vehicles in flight. This destruction may occur both by physical damage (direct effect) to structural or electronic components from lightning attachment to the vehicle and by damage or upset to electronic systems from a nearby discharge (indirect effect). The direct and indirect effects of a lightning discharge pose hazards to the safety critical systems of launch and reentry vehicles, such as the FSS. If damage to the vehicle's safety critical components renders it inoperable or causes safety-critical systems to malfunction, there may be no way to stop the vehicle from reaching the public. For example, the damage may cause the command signal that instructs the vehicle to stop thrusting, or to abort the mission, to not be received. Two such triggered lightning events occurred in 1969 and 1987, during ascent. In 1969, when a manned Apollo XII \117\ vehicle lost power to its Command Module, the launch was seconds away from beginning initiation of its abort command. In 1987, an unmanned ELV lost its guidance, navigation and control \118\ and began careening towards the range safety impact limit lines. The range safety officer had to terminate its flight. ---------------------------------------------------------------------------

\117\ Merceret et al., ed., A History of the Lightning Launch Commit Criteria and the Lightning Advisory Panel for America's Space Program. NASA/TP-2010-216283, 10, Section 2.3 (August 2010). \118\ Merceret et al., ed., A History of the Lightning Launch Commit Criteria and the Lightning Advisory Panel for America's Space Program. NASA/TP-2010-216283, 31, Section 4.3.2 (August 2010). ---------------------------------------------------------------------------

These two incidents led to the establishment of the present-day lightning launch commit criteria (LLCC), which the Air Force and NASA adhere to for all launches from a Federal launch range. The Lightning Advisory Panel (LAP),\119\ an advisory body to the Air Force and NASA, is responsible for reviewing and proposing modifications to the LLCC. Adherence to the LLCC has resulted in zero lightning-caused launch incidents for over thirty years. ---------------------------------------------------------------------------

\119\ The LAP's expertise range from in-depth knowledge of the physics of lightning, electric fields, and clouds, to lightning impacts on launch vehicles and statistics of electric field strength in specific environmental conditions. Its membership is primarily academia, although the Air Force and NASA fund this organization. ---------------------------------------------------------------------------

The FAA codified the LLCC into Appendix G to part 417 to address concerns that the direct and indirect effects of a natural or triggered lightning strike may disable a vehicle's FSS such that the launch operator could not stop the vehicle if it veered outside the impact limit lines (i.e., due to degraded signal). The FAA renamed these requirements to ``Lightning Flight Commit Criteria'' (LFCC). The LFCC in appendix G to part 417 consist of 10 natural and triggered lightning avoidance rules that provide criteria to minimize the risk of a launch vehicle being struck by lightning or triggering lightning. One rule contains criteria for avoiding natural lightning, the remaining nine contain avoidance criteria for triggering or initiating lightning when flying through, or near, specific cloud types or phenomena known to produce natural or triggered lightning. Taking into account the electrification process and the properties of electric fields within clouds, the triggered lightning rules establish time and distance requirements for distinct cloud types (e.g., cumulus cloud, attached or detached anvil cloud, thick clouds) believed to contain the necessary environmental conditions to produce elevated electric fields. These time and distance criteria help mitigate the threat of triggering lightning by increasing the probability that the electric field, at a given distance or after a length of time, will be below the threshold needed to produce lightning. Other rules contain prescriptive requirements and thresholds for not launching if there are high-surface electric fields as measured by a ground-based field mill, or if there is a threat of a vehicle becoming charged if it penetrates a cloud that contains frozen precipitation.\120\ ---------------------------------------------------------------------------

\120\ Triboelectrification is a phenomenon that can occur when a launch vehicle flies through a region in a cloud that contains frozen precipitation. Under the right conditions, frozen precipitation can deposit a charge on the vehicle. If the launch vehicle is not treated, an electrostatic discharge could result. ---------------------------------------------------------------------------

Unfortunately, codifying the LLCC into appendix G of part 417 has led to two major challenges. First, because the science behind triggering lightning is not fully known, the criteria were developed with a margin of safety for large ELVs, such as the Titan IV. As a consequence, the criteria may be overly conservative for certain types of vehicles. While the LAP has updated the LLCC to keep pace with the advances in science and technology, the FAA rulemaking process is lengthy, and does not permit appendix G to be updated with the frequency necessary to keep up with the changes to the LLCCs. Revisions to appendix G are likely to be

[[Page 15341]]

out-of-date by the time they are finalized and published. As a result, appendix G preserves much of the original LLCCs outdated standards, which leaves a discrepancy between the LLCC and appendix G. In an effort to address this issue, the FAA made four ELOS determinations. The first ELOS determination permitted the use of a new maximum radar reflectivity method \121\ to determine whether the radar reflectivity values were below the risk threshold for triggering lightning in the cloud. Because this new measurement technique was not in appendix G, the launch operator could not benefit from this improvement unless it requested and received approval to use this technique rather than follow the criteria currently in appendix G. The ELOS determination relieved the burden on the operator to seek approval to use a different radar reflectivity measurement process; therefore, allowing more opportunity for the launch operator to take advantage of the improvement rather than wait until a final rulemaking incorporated the change. ---------------------------------------------------------------------------

\121\ This radar reflectivity method allowed measurement of a hydrometeor by a radar with a wavelength of less than 5 centimeters but greater than 3 centimeters if: (1) The surface of the radome of the radar was hydrophobic and the precipitation rate at the radar site was less than 15 mm/hr (0.59 in/hr) rainfall equivalent, and (2) For each point that was measured, the horizontal extent of composite radar reflectivity greater than lOdBZ along the line of sight between the radar and the point did not exceed the reflectivity extent in kilometers for a 3 cm radar due to radar beam attenuation. ---------------------------------------------------------------------------

When the LAP updated the LLCCs again, the FAA issued a second ELOS determination reducing the distance requirement for the flight path of the launch vehicle in relation to a thick cloud, if the radar reflectivity thresholds were satisfied.\122\ The issuance of this ELOS determination was necessary to enable operators to use the most recent thick cloud rule without needing to seek individual ELOS determinations from the FAA or waiting for the FAA to update appendix G through a rulemaking. ---------------------------------------------------------------------------

\122\ The Launch operator can launch within 5nm of a thick cloud layer if the radar reflectivity is below 0 dBZ. ---------------------------------------------------------------------------

The third ELOS determination also resulted from an update to the LLCCs and allowed for use of a shorter radar wavelength to measure radar reflectivity if the criteria for attenuation due to rainfall and beam spreading were met. This modification allowed a launch operator to make use of weather radars that have wavelengths between 3 and 5 cm, in addition to radars with wavelengths of 5 cm or greater. Similar to the other ELOS determinations, this relieved the burden from the operator to seek approval from the FAA, and allowed the operator to immediately use different radar wavelengths or wait until the FAA updated appendix G. The fourth ELOS determination informed the launch operator that satisfying NASA-STD-4010 would meet the requirements of appendix G to part 417.\123\ This ELOS determination enabled an operator to use the more up-to-date LLCC in place of the outdated LFCC in appendix G. It also recognized that the NASA-STD-4010 contained the most current LLCCs and removed the burden from the FAA to issue an ELOS determination for every new update to the LLCC. ---------------------------------------------------------------------------

\123\ The NASA-STD-4010 has been adopted by both NASA and the Air Force. When NASA published the LLCCs in a NASA Standard document it provided uniform engineering and technical requirements in one location lessening confusion to which version of the LLCCs were currently being applied. ---------------------------------------------------------------------------

The FAA only codified the LFCCs into part 417, and not parts 431 and 435. While the LFCCs are not explicitly included in part 431 or 435, Sec. 431.35(c) requires an applicant to employ a system safety process to identify and mitigate hazards, including lightning. Additionally, while not all launch and reentry vehicles have the same threshold to trigger lightning, they do have the potential to incur direct or indirect effects that may impact their safety critical systems. Therefore, in order to protect public health and safety, the LFCCs are an appropriate mitigation strategy for suborbital RLVs and reentry vehicles that can induce lightning that could affect public safety. In 2006, the FAA sponsored a study to conduct a triggered lightning risk assessment for five different concept suborbital RLVs, from two different launch sites, to gain an understanding of the potential risk of triggering lightning for these new categories of vehicles.\124\ The study took into account the vehicle design, mission profile, and propellants, as well as the lightning climatology of a given launch site. In 2010,\125\ a follow-on study was performed for four concept vehicles at a total of four different launch sites.\126\ The study showed that all concept vehicles had a much higher triggering threshold (i.e., it was harder to initiate lightning) than that of a Titan IV ELV and that they each had different triggering thresholds within each concept vehicle and phase of mission. For instance, the glide phase was shown to have a higher triggering threshold than a powered phase. On the other hand, the study noted that many uncertainties remain with understanding the triggering conditions. Therefore, the results of the study recommended that until more accurate triggering thresholds for the differing vehicle concepts can be quantified, the avoidance criteria should be followed. The FAA requests comments on this proposal. ---------------------------------------------------------------------------

\124\ Krider, Phil, E. et al., Triggered Lightning Risk Assessment for Reusable Launch Vehicles at the Southwest Regional and Oklahoma Spaceports, Report No: ATR-2006(5195)-1, Jan 30, 2006 (https://www.faa.gov/about/office_org/headquarters_offices/ast/reports_studies/media/ATR-2006(5195)-1.pdf). \125\ Krider, Phil, E., et al., Triggered Lightning Risk Assessment for Reusable Launch Vehicles at Four Regional Spaceports, Report No: ATR-2010(4387)-1, Apr 30, 2010. (https://www.faa.gov/about/office_org/headquarters_offices/ast/reports_studies/media/ATR-2010%20(5387)-1.pdf). ---------------------------------------------------------------------------

The ARC recommended the intent or performance goal of the current LFCC be captured into performance-based requirements that allow for the consideration of each launcher's mission profile, general vehicle and flight safety system components, and other factors that may reduce the currently-required 30-minute wait.\127\ The ARC also recommended that the prescriptive requirements in Appendix G be placed in a guidance document that provides acceptable means of meeting the performance- based requirements. Finally, the ARC estimated that launch and site operators could save hundreds of thousands of dollars, or more, for each avoidance of launch scrubs and no-go calls due to unnecessarily conservative weather restrictions. ---------------------------------------------------------------------------

\127\ The ARC stated, ``intent or performance goal, of the stated requirements.'' The FAA has interpreted the phrase ``of the stated requirements'' to mean of the current LFCC found in appendix G to part 417. ---------------------------------------------------------------------------

The FAA generally agrees with the ARC's recommendation and proposes to replace the detailed prescriptive LFCC in appendix G with performance-based requirements in proposed Sec. 450.163. It would also provide an AC that contains an accepted means of compliance with the proposed Sec. 450.163(a)(1), including reference to NASA-STD-4010 \128\ and would also include other relevant standards for the design of a vehicle to withstand the direct and indirect effects of a lightning discharge. The FAA seeks comment on this approach. ---------------------------------------------------------------------------

\128\ NASA-STD-4010 is the current lighting launch commit criteria employed by NASA and the Air Force. The FAA uses this standard as its basis for the requirements in Appendix G and has issued a broad-based ELOS determination allowing an operator to comply with the current NASA-STD-4010 instead of the existing Appendix G which is outdated. ---------------------------------------------------------------------------

The FAA anticipates that a performance-based regulation, accompanied by an associated AC and government standards, would resolve

[[Page 15342]]

many of the issues with the current Appendix G. While a thorough understanding of whether a given launch vehicle and its mission profile will trigger lightning is far from being understood, a performance- based requirement for mitigating natural and triggered lightning strikes or encountering a nearby lightning discharge would allow an operator to use up-to-date lightning avoidance criteria without having to wait for the regulation to be updated, or for the FAA to issue an ELOS determination or a waiver. The intent of the current requirements found in Appendix G to part 417 is to avoid and mitigate natural and triggered lightning. Under the proposed regulations, the FAA would require operators to avoid and mitigate the potential for intercepting or initiating lightning strike or encountering discharge through implementation of flight commit criteria. Alternatively, an operator would be able to use a vehicle designed to continue safe flight if struck by lightning or encountering a nearby discharge. Finally, an operator would be able to comply with the proposed regulation by ensuring that compliance with public safety criteria would be met in the event of a lightning strike on the vehicle. Proposed Sec. 450.163(a)(1), would require an operator to mitigate the potential for a vehicle to intercept or initiate a lightning strike or encounter a nearby discharge through flight commit criteria using a means of compliance accepted by the Administrator. Currently, the FAA is only aware of one standard, NASA-STD-4010, that is currently acceptable and would satisfy the requirements of proposed Sec. 450.163(a)(1). While FAA anticipates that industry might develop new standards as technology advances, such standards would be required to be submitted as alternative means of compliance under Sec. 450.35 (Accepted Means of Compliance) paragraph (c) and accepted by the Administrator prior to use. If an operator were to submit an alternative means of compliance to NASA-STD-4010, the proposed lightning standard would need to be evaluated and accepted by the FAA, including any consultation with outside expert, prior to being used in any license application using the new standard. The FAA anticipates that this revision would provide more flexibility to an operator than the current appendix G, which prescribes the specific lightning flight commit criteria that an operator must use. While the only method currently accepted by the Administrator is NASA-STD-4010, operators would have the flexibility to propose lightning flight commit criteria based on a certain vehicle's mission profile (e.g., whether it is a piloted RLV launching a payload to low Earth orbit, or a piloted suborbital reusable launch vehicle with spaceflight participants on board).\129\ However, as previously discussed, such a proposed means of compliance would need to be accepted prior to being used in a license application to satisfy proposed Sec. 450.165(a)(1). ---------------------------------------------------------------------------

\129\ The piloted vehicles can control and maneuver the vehicle leading up the release point or area thus limiting the exposure of the vehicle to elevated electric fields upon its launch. ---------------------------------------------------------------------------

An operator may choose instead to mitigate lightning strikes and the initiation of lighting by using a vehicle designed to continue safe flight in the event of a lightning strike, in accordance with proposed Sec. 450.163(a)(2). To accomplish this, an operator would need to demonstrate that the vehicle design adheres to design standards for lightning protection of the vehicle and its safety critical systems. The FAA is currently evaluating current aircraft lightning protection standards, such as AC 20-136B and AC20-107B, to determine whether a launch or reentry vehicle designed to those standards would allow for the continued safe flight of the vehicle.\130\ The FAA anticipates that it would accept other industry standards for lightning protection or certification standards during vehicle design, such as SAE Aerospace Recommended Practices, or European Organization for Civil Aviation Equipment, as an acceptable means of compliance to proposed Sec. 450.163(a)(2). ---------------------------------------------------------------------------

\130\ AC 20-136B, Aircraft Electrical and Electronic Lightning System Lightning Protection, provides information and guidance on the protection of aircraft electrical and electronic systems from the effects of lightning. AC 20-107B, provides information and guidance on composite aircraft structure. ---------------------------------------------------------------------------

Finally, an operator would be able to choose to comply with proposed Sec. 450.163(c) by ensuring that it would be in compliance with the public safety criteria of proposed Sec. 450.101 should it encounter discharge or take a direct lightning strike. The use of physical containment as a hazard control strategy would be a prime example, but other scenarios may also apply. Section 450.163 would apply to all launch and reentry vehicles, including ELVs, RLVs, hybrids, and reentry vehicles. Because the proposed requirement is performance based, each operator would be able to provide lightning mitigation methods designed for a specific vehicle's mission profile. Under Sec. 450.163, the FAA anticipates that an operator would be able to apply new research findings or methodologies in a more timely manner than under appendix G. Further, the FAA would be able to update guidance materials in a timely manner to include those means of compliance that result from advances in science, information, or technology. Additionally, the FAA believes that, by providing an operator with the flexibility to mitigate natural and triggered lightning strikes through standards and best practices, the operators could avoid costly delays resulting from compliance with the requirements in the current appendix G. Section 450.163(b) would establish application requirements. To comply with proposed Sec. 450.163(a)(1), an applicant would be required to submit lightning flight commit criteria that mitigate the potential for a launch or reentry vehicle intercepting or initiating a lightning strike, or encountering a nearby discharge using a means of compliance accepted by the Administrator. As previously discussed, the only current method to comply with Sec. 450.165(a)(1) would be to use NASA-STD-4010. If an applicant chooses instead to comply with Sec. 450.163(a)(2), it would be required to provide documentation demonstrating that the vehicle is designed to protect safety critical systems, such as electrical and electronic systems, or FSSs. The FAA anticipates that this documentation would include proof and validation that the vehicle has followed lightning protections standards that would protect the vehicle's safety critical systems from a direct or indirect lightning discharge. If an applicant chooses to comply with Sec. 450.163(a)(3), it would be required to provide documentation demonstrating compliance with Sec. 450.101 in the event of a lightning discharge. As previously discussed, the FAA expects that this would be demonstrated through any number of analyses that validate that the vehicle is able to control individual and collective risk to the public, The FAA considered using direct measurement of the electric field within a cloud as an option for a launch operator to comply with proposed Sec. 450.163. However, it is the FAA's understanding that there is currently no consensus among the scientific community on the electric field value threshold to initiate lightning. Without a definite threshold value, the FAA would not be able to make a safety determination if an operator were to take direct measurements of the electric field. In addition, further research and data is required to establish procedures for measuring within the cloud, for how many measurements to make within a

[[Page 15343]]

period of time or distance from the cloud, and such other considerations. Nevertheless, given the performance-based nature of Sec. 450.163, it is possible that in the future, an accepted means for obtaining real time electric field readings along the flight profile could lead to less restrictive criteria. 10. Flight Safety Rules In proposed Sec. 450.165, an operator would be required to establish and observe flight safety rules that govern the conduct of each launch or reentry. These would include flight commit criteria and flight abort rules. i. Flight Commit Criteria The FAA proposes to consolidate the flight-commit criteria requirements currently contained in parts 417, 431, and 435. Flight- commit criteria are conditions necessary prior to the flight of a launch vehicle or the reentry of a reentry vehicle to ensure that the launch or reentry does not exceed the public safety criteria in proposed Sec. 450.101. Although this proposal restates flight-commit requirements differently than the current regulations, the changes would not alter substantive requirements, and are intended solely for clarification purposes. The ELV launch requirements for flight readiness are contained in Sec. Sec. 415.37 and 417.113. Section 415.37 requires an applicant to file procedures for verifying readiness for safe flight, which result in flight-commit criteria. Section 417.113(c) requires that the launch safety rules include flight-commit criteria that identify each condition that must be met in order to initiate flight. The flight- commit criteria must implement the FSA; for a launch that uses an FSS, must ensure that the FSS is ready for flight; and for each launch, must document the actual conditions used for the flight-commit criteria at the time of lift-off and verify whether the flight-commit criteria are satisfied. Flight-commit criteria for launch and reentry of a reusable launch vehicle are contained in Sec. Sec. 431.37 and 431.39, and by extension in Sec. 435.33 for the reentry of a reentry vehicle other than a RLV. Unlike part 417, the parts 431 and 435 requirements are performance- based and required as part of the system safety analysis requirements. Flight-commit criteria-related requirements appear throughout proposed part 450. The main requirements would be found in Sec. Sec. 450.155, 450.159, and 450.165. Section 450.155 would require an operator to document and implement procedures to assess readiness to proceed with the flight of a launch or reentry vehicle. Proposed Sec. 450.159 would require an operator to implement preflight procedures to verify that each flight-commit criterion has been met before initiating flight. Proposed Sec. 450.165 would mandate that an operator's flight safety rules include flight-commit criteria identifying each condition necessary prior to initiating flight to satisfy proposed Sec. 450.101. These commit criteria would include surveillance, monitoring of meteorological conditions, implementing window closures for the purpose of collision avoidance, monitoring the status of any flight safety system, and any other hazard controls derived from system safety, software safety, or flight safety analyses. Also, for any reentry vehicle, the commit criteria would include monitoring the status of safety-critical systems before enabling reentry flight. Part 450 also includes requirements to develop flight-commit criteria based on the results of various analysis. For instance, Sec. 450.135 (Debris Risk Analysis) would require operators to demonstrate compliance with public safety criteria in proposed Sec. 450.101. In Sec. 450.137, the far-field overpressure blast effect analysis would have to demonstrate compliance with public safety criteria in proposed Sec. 450.101. Sections 450.139 (Toxic Hazards for Flight) and 450.187 (Toxic Hazards Mitigation for Ground Operations) would require an operator to derive flight-commit criteria based on the results of its toxic release hazard analysis, containment analysis, or toxic risk assessment to ensure any necessary evacuation of the public from any toxic hazard area prior to flight. Proposed Sec. 450.141 (Wind Weighting for the Flight of an Unguided Suborbital Launch Vehicle) would require an operator to establish flight-commit criteria that control the risk to the public from potential adverse effects from normal and malfunctioning flight. Proposed Sec. 450.161 would require an applicant to describe how it will provide for day-of-flight surveillance of flight hazard areas, if necessary, to ensure that the presence of any member of the public in or near a flight hazard area is consistent with flight-commit criteria. Section 450.163 would require an operator to derive flight-commit criteria that mitigate the potential for a launch or reentry vehicle intercepting or initiating a lightning strike, or encountering a nearby discharge. Finally, Sec. 450.169 (Launch and Reentry Collision Avoidance Analysis) would require an operator use the results of the collision avoidance analysis to develop flight-commit criteria for collision avoidance. ii. Flight Abort Rules The FAA proposes to include flight abort rules as part of proposed flight safety rules in Sec. 450.165. Flight abort rules apply to a vehicle that uses an FSS and are the conditions under which an FSS must abort the flight to ensure compliance with flight safety criteria. Current regulations in parts 417 and 431 address flight abort rules. Section 417.113(d) sets flight termination rules for ELVs. It requires operators to identify the conditions under which the FSS, including the functions of the flight safety system crew, must terminate flight to ensure public safety. The flight termination rules must implement the FSA, and specifically requires operators to terminate flight in the following six scenarios: 1. When real-time data indicate a flight safety limit has been reached. 2. At the straight-up time if the vehicle flies straight up. 3. If the vehicle becomes erratic and may endanger protected areas, while potentially losing control of the flight safety system. 4. No later than at the expiration of the data loss flight time if tracking data is lost. 5. If a vehicle is performing erratically prior to entering an overflight gate, or if the vehicle is not flying parallel to or converging to the nominal trajectory prior to entering a gate. 6. If a vehicle is performing erratically prior to entering a hold gate, or if the vehicle is not flying parallel to or converging to the nominal trajectory prior to entering a hold gate. Some of these current requirements may be overly prescriptive. For example, flight abort at the straight-up time is only one method of mitigating risk to the launch area in the event of a vehicle that fails to program and flies straight up. Although other methods may mitigate risk to an acceptable level, under the current requirements, an operator would be forced to abort flight at the straight up time. Also, the rules for allowing vehicles to enter gates are too subjective and not easily tied to specific hazards. Part 431, applicable to RLVs, does not impose specific flight abort rules. However, Sec. 431.39(a) requires an applicant to submit mission rules and contingency abort plans that ensure safe conduct of mission operations during nominal and non-nominal vehicle flight. These would encompass flight abort rules because Sec. 401.5 defines contingency abort as the cessation of

[[Page 15344]]

vehicle flight during ascent or descent in a manner that does not jeopardize public health and safety and the safety of property, in accordance with mission rules and procedures. Part 431 requires flight abort when needed to mitigate risk and a set of rules to that end, yet does so without following part 417's more detailed and prescriptive approach. In practice, orbital rockets licensed under part 431 have used an AFSS with flight abort rules that are conservatively consistent with the six scenarios identified in 417.113(d), when applicable (e.g., no straight-up time for a horizontal launch). Section 450.165(c) lays out the proposed consolidation and clarification of flight abort rules. Although the FAA would maintain much of Sec. 417.113(d)'s structure and requirements, the FAA looked for opportunities to replace prescriptive requirements with outcome objectives. The FAA would require operators to develop flight abort rules to comply with the public safety criteria of Sec. 450.101, as well as to prevent debris capable of causing a casualty from impacting in uncontrolled areas if the vehicle is outside the limits of a useful mission. Operators would also need to identify the functions of any flight abort crew, as specifically required in part 417. This is also consistent with the FAA's practice in implementing part 431. Although not specifically stated in Sec. 431.39(a), the FAA has required operators to identify crew functions. The FAA proposes to eliminate the straight-up rule, as it is not reasonable to include the rule at the exclusion of other existing mitigation options. Also, the FAA proposes to simplify the current requirements for gate passage to allow a vehicle to pass through a gate if it can achieve a useful mission. This would allow the operator to specify which vehicle parameters are the most useful for determining whether a vehicle should be allowed to enter a gate. For orbital launches, vehicles unable to achieve orbit cannot achieve a useful mission and should be terminated. The FAA would delete separate requirements for hold-and-resume gates, as analysis should show which types of gates are most effective for the proposed flight, and those should be implemented. These proposed rules, which would be similar to those from part 417, were chosen over the generic requirement for mission rules from part 431 because they correspond to other sections in the proposed rule describing flight safety limits, gates, and other requirements. This is consistent with the ARC's recommendation to change part 431 to better capture the intent of the flight abort rules. An operator should balance potentially competing objectives as necessary to minimize risk when writing specific flight abort rules. For example, if there is a rule to destruct a vehicle to prevent an intact impact in order to reduce distant focused overpressure risk, the operator should also consider the resulting risk to aircraft when establishing the timing of the destruct action. Proposed Sec. 450.165(d) lays out the application requirements for flight safety rules. For flight commit criteria, the FAA would require an applicant to provide a list of all flight commit criteria. These would include any criteria related to surveillance, monitoring of meteorological conditions, implementation of launch or reentry windows closures for the purpose of collision avoidance, confirmation that any safety-critical system is ready for flight, monitoring of safety- critical systems prior to enabling re-entry flight, and any other hazard controls. For flight abort rules, the FAA would require an applicant to provide a description of each rule, and the parameters that will be used to evaluate each rule, as well as a list that identifies the rules necessary for compliance with each requirement in Sec. 450.101. All conditions in which flight abort action would be taken must be described, as well as rules and conditions allowing flight to continue past a gate. Lastly, the FAA would require an applicant to provide a description of the vehicle data that will be available to evaluate flight abort rules across the range of normal and malfunctioning flight. This information is necessary to ensure that compliance with the flight abort rules is achievable. 11. Tracking The FAA proposes to adopt vehicle tracking requirements. Specifically, proposed Sec. 450.167 (Tracking) would require an operator to measure and record in real time the position and velocity of the vehicle. The system used to track the vehicle would be required to provide data to determine the actual impact locations of all stages and components, and to obtain vehicle performance data for comparison with the preflight performance predictions. The proposed requirements would be consistent with current practice for a wide variety of vehicles, including the widespread use of telemetry data, and various requirements of parts 417, 431, and 437. Current regulations for ELVs require a vehicle tracking system as part of the FSS. For example, in Sec. 417.113(c), as part of the flight commit criteria for a launch that uses an FSS, readiness for flight includes that the launch vehicle tracking system has no less than two tracking sources prior to lift-off. Also, the launch vehicle tracking system must have no less than one verified tracking source at all times from lift-off to orbit insertion for an orbital launch, to the end of powered flight for a suborbital launch. Of course, the need for tracking is implicit in other requirements for launch of a vehicle with an FSS, including the requirements regarding data loss flight times in Sec. 417.219. Section Sec. 417.125 also requires an operator of an unguided suborbital launch vehicle to track the flight of its vehicle. Specifically, Sec. 417.125(f) requires an operator to provide data to determine the actual impact locations of all stages and components, to verify the effectiveness of a launch operator's wind weighting safety system, and to obtain rocket performance data for comparison with the preflight performance predictions. Part 431 has no explicit requirements related to tracking. However, currently every operation licensed under part 431 is required to employ a telemetry system that provides, among other safety critical information, data on the position and velocity of the vehicle in real- time. In addition, the one orbital RLV operation licensed to date employed an FSS and established data loss flight times. The use of data loss flight times is an explicit recognition that a vehicle without tracking poses a potential hazard to the public. Tracking is also required under Experimental Permit regulations. Under Sec. 437.67, an operator must, during permitted flight, measure in real-time the position and velocity of its reusable suborbital rocket. The requirements for an operator to measure in real time the position and velocity of its rocket, coupled with the requirement to communicate with ATC during all phases of flight, are intended (among other things) to provide ATC with enough information to protect the public if the vehicle flies outside its planned trajectory envelope. Tracking data sufficient to identify the location of any vehicle impacts following an unplanned event are necessary to ensure a proper response to an emergency. Specifically, a launch operator must implement its mishap response plan if an unplanned event occurring during the flight of a launch vehicle results in the impact of a launch vehicle, its payload or any component thereof outside designated impact limit lines for an expendable launch vehicle; and, for an RLV, outside a designated landing site. More generally, vehicle-

[[Page 15345]]

tracking data provide a level of awareness that enables an appropriate response to an off-nominal situation, such as knowing where to apply fire suppression resources or where to evacuate the public to protect against predicted toxic plumes. More specifically, tracking data are an important element of current U.S. Government consensus standards, in accordance with RCC 321, to ensure the safety of people in aircraft. Specifically, since 2007, RCC 321 has included a requirement (in paragraph 3.3.4) to coordinate with the FAA to ensure timely notification of any expected air traffic hazard associated with range activities. In the event of a mishap, RCC 321 requires that the operator must immediately inform the FAA of the volume and duration of airspace where an aircraft hazard is predicted.\131\ ---------------------------------------------------------------------------

\131\ Range Commanders Council, Common Risk Criteria for National Test Ranges, RCC 321-07, White Sands Missile Range, New Mexico, 2007. ---------------------------------------------------------------------------

Tracking data are also necessary to evaluate vehicle safety performance, even for normal flight. For example, Sec. 417.125(g)(3) requires a launch operator of an unguided suborbital launch vehicle to compare the actual and predicted nominal performance (i.e., trajectory) of the vehicle. Accurate data to describe the vehicle normal trajectory envelope are necessary for valid quantitative public risk assessments. Current practice demonstrates that tracking data will help facilitate safe and efficient integration of launch and reentry operations into the NAS. The increasingly congested and constrained NAS creates a need to transition from segregation, to full integration of space vehicles. The FAA has several efforts underway to ensure the safe and efficient transition of launch and reentry vehicles through the NAS, while minimizing the effects of these operations on other users of the NAS. The FAA has contemplated the need to obtain real time data tracking data, including vehicle state vectors, reports of mission events, and indications of vehicle status, to help accomplish this. However, the FAA is deferring that discussion until after the Airspace Access Priorities ARC.\132\ ---------------------------------------------------------------------------

\132\ Information regarding the Airspace Access Priorities ARC is available at https://www.faa.gov/regulations_policies/rulemaking/committees/documents/index.cfm/document/information/documentID/3443. ---------------------------------------------------------------------------

Proposed Sec. 450.167(a) would require an operator to measure and record in real time the position and velocity of the vehicle. The system used to track the vehicle would need to provide data to determine the actual impact locations of all stages and components, and to obtain vehicle performance data for comparison with the preflight performance predictions. The proposed requirements are consistent with current practice for a wide variety of vehicles, including the widespread use of telemetry data, and various requirements levied under parts 417, 431, and 437. Proposed Sec. 450.167(a) would consolidate and standardize the current regulatory requirements for vehicle tracking-related information. Vehicle-tracking data facilitate appropriate emergency responses, and an ability to determine the actual vehicle impact locations due to an unplanned event is critical to evaluate the class of mishap. Comparison of the actual vehicle safety performance, such as the trajectory, with preflight predictions helps ensure the continued accuracy of the FSA input, and thus the validity of the public risk assessments and hazard areas. A comparison of the actual vehicle safety performance data to predict performance provides the FAA with a means to evaluate an operator's understanding of its safety margins, which is a measure of maturity of the operation and thus a potential factor in the probability of failure analysis. Proposed Sec. 450.167(b) would require an applicant to identify and describe each method or system used to meet the tracking requirements of proposed Sec. 450.167(a) of this section. Because the proposed requirements are consistent with current practice, and in some cases less restrictive, the application requirements would not increase burden on license applicants. 12. Launch and Reentry Collision Avoidance Analysis Requirements The FAA proposes to modernize the launch and reentry collision avoidance analysis criteria to match current common practice and provide better protection for inhabitable and active orbiting objects. It would also allow launch and reentry operators to obtain a launch collision avoidance analysis from Federal entities identified by the FAA. Previously, the FAA established identical rules for expendable launches from Federal and non-Federal launch ranges, RLV operations, and permitted launch operations. The proposed rule would consolidate launch and reentry collision avoidance analysis requirements from these three different parts into a single safety rule. The FAA anticipates that proposed changes to the collision avoidance analysis criteria would not significantly affect operators. The changes would capture current practice, provide alternative means of meeting existing requirements, and clarify the time period that the analysis must address. Launch and reentry collision avoidance measures are necessary actions for responsible and safe launches and reentries. Under current regulations, a launch collision avoidance analysis is performed prior to each launch to protect against collision with only inhabitable objects, including the International Space Station, as required screening objects. It is important to avoid collisions during launches because the energy released through an impact during launch would most likely be catastrophic for the launch vehicle and the object it impacted. In addition to mission assurance, to ensure the successful launch of an object, there are significant reasons to mitigate debris creation through collision avoidance. Launch collision avoidance analysis occurs prior to launch and entails the determination of times when a launch should not be initiated. There is a balance between launch opportunities and orbital safety that must be established to protect both the launch vehicle and on-orbit objects. Reentry collision avoidance analysis occurs prior to the initiation of a reentry maneuver and provides for the review of the maneuver trajectory to establish when reentry should not be initiated. Section 431.43(c)(1)(ii) documents the requirement for reentry collision avoidance. The creation of orbital debris is an expected result of a collision during launch or reentry.\133\ As stated earlier, limiting orbital debris is a vital part of protecting the space environment and is a national objective. Therefore, the FAA believes it is paramount to avoid all collisions during launch and reentry. The Department of Defense created a tiered level of separation distance to avoid collisions and still allow ample opportunity for launch. The FAA agrees with the tiers, identified in the chart below. This chart excludes the object launching or reentering, which would be damaged or destroyed in all cases. ---------------------------------------------------------------------------

\133\ Orbital debris is all human-generated debris in Earth orbit that is greater than 5 mm in any dimension. This includes, but is not limited to, payloads that can no longer perform their mission, rocket bodies and other hardware (e.g., bolt fragments and covers) left in orbit as a result of normal launch and operational activities, and fragmentation debris produced by failure or collision. Gases and liquids in free state are not considered orbital debris.

[[Page 15346]]

Figure 2--Launch Collision Avoidance Justifications and Tiers -------------------------------------------------------------------------------------------------------------------------------------------------------- U.S. national Separation Protect public security or International Avoid debris distance health and safety Safety of property foreign policy obligations generation interests -------------------------------------------------------------------------------------------------------------------------------------------------------- Inhabitable Objects............. 200 km............ Yes............... Yes............... Yes............... Yes............... Yes. Active Satellites............... 25 km............. .................. Yes............... Yes............... Yes............... Yes. Trackable Debris >10 cm\2\ (LEO) 2.5 km............ .................. .................. Yes, if it creates Yes, if it creates Yes. significant significant debris. debris. Un-trackable Debris -6, consistent with current Air Force practice, rather than relying solely on the spherical or ellipsoidal separation distance of 200 km currently required by section A417.31(c)(8)(i) and (ii) and Sec. 431.43(c)(1). The spherical separation-distance option is the most conservative option and requires the least detail about the location of the launch vehicle and therefore results in the largest window closures. If launch operators have covariance--that is, uncertainty--information applicable to their nominal trajectories, the option of limiting the probability of collision allows for greater fidelity in avoiding a collision with inhabitable objects. For collision probability screening, proposed Sec. 450.169(a)(1)(i) would require a covariance information, typically provided in a matrix, that identifies the uncertainty of the launch vehicle trajectory. When an operator can provide sufficient covariance (as identified in proposed appendix A to part 450, paragraph (d)(3)), the probability of its collision with an inhabitable object can be accurately calculated and launch window closures can be limited to only those times where actual high risk exists. In essence, this fine-tuned launch collision avoidance would provide assurance against collisions while minimizing potential launch window closures. The FAA proposes to allow the use of a probability of collision because the 18th Space Control Squadron's (SPCS) use of the proposed probability threshold has prevented collisions while still allowing for maximum availability of launch windows. The FAA agrees that using probability assessment adequately protects inhabitable spacecraft while maximizing the time available for launch. Probability of collision is also the preferred analysis method for reentry collision avoidance. According to NASA,\136\ the Department of Defense's 18th SPCS current practice for on-orbit debris regarding the ISS is to assess potential conjunctions inside specific-sized boxes centered on the ISS. Any object predicted to pass within this box is tracked with higher priority. The 18th SPCS then uses the best available data set to compute the probability of collision with the potentially-threatening catalogued object. If that probability is greater than 1 x 10-4, the ISS performs a collision avoidance maneuver. If that probability is greater than 1 x 10-5, then the ISS would perform a collision avoidance maneuver when doing so would not compromise its mission objectives. Additionally, the proposed requirements in Sec. 450.169 for a launch and reentry collision avoidance probability of collision criteria of 1 x 10-6 against inhabitable

[[Page 15349]]

objects is consistent with current NASA practices. ---------------------------------------------------------------------------

\136\ Operational Interface Procedures. Volume A, Report Number SSP-50643-A, Section 7.16.2. Published June 28, 2003, and last modified October 17, 2008. ---------------------------------------------------------------------------

iii. Separation Distance Calculations by Sphere or Ellipsoid Section 417.231 currently requires a launch operator to ensure a separation distance of 200 km between its launch vehicle, any jettisoned components, or its payload, and an inhabitable object.\137\ The regulation does not specify whether the separation distance must be spherical or may be ellipsoidal. Section A417.31(c)(8) of Appendix A does, however, permit a launch operator to use spherical or ellipsoidal screening. In practice, the 18th SPCS provided ellipsoidal distances in the standardized collision avoidance request form, and the FAA has allowed the 18th SPCS methods as acceptable for launch screening volumes. The FAA anticipates that identifying these options in proposed Sec. 450.169(a) will reduce confusion and accurately capture the requirements for ellipsoidal screening. Additionally, the FAA's proposal would clarify that either method of calculation would be acceptable. ---------------------------------------------------------------------------

\137\ 14 CFR 417.231(b). ---------------------------------------------------------------------------

Using ellipsoidal separation calculation would permit a launch vehicle to come within a predicted 50 km from an inhabitable object in the cross-track and radial directions. The in-track distance would be maintained at 200 km. The result is an ellipse around the inhabitable object that looks approximately like a pencil with the tip in the direction of travel. In accordance with longstanding Federal range standards, the 50-km separation distance in the cross-track and radial directions would provide an equivalent level of safety compared to a separation distance based on a sphere because the uncertainty in orbital location is significantly less side-to-side than it is along the velocity vector. Because the velocity vector is greatest in-track, a small change in velocity results in a significant variation in arrival time, and therefore requires the greatest compensation (200 km). However variations in orbital altitude are possible, but occur at a significantly reduced rate, allowing the exclusion distance to be reduced to 50 km radially. Variations laterally are also minimal and require the smallest compensation, allowing the reduction to 50 km in the cross-track directions. The FAA agrees with the Federal range conclusions that the ellipsoidal calculation maintains an equivalent level of safety as the 200-km spherical calculation. iv. Collision Avoidance for Objects That Are Not Inhabitable Sections A417.31(c)(8) and C417.11(d)(8) require that if a launch operator requests launch collision avoidance analysis for unmanned or unmannable objects, the analysis must use the spherical screening method with a separation distance of 25 km (approximately 15.5 statute miles). The screening was optional but, if used, the distance was mandated. The FAA proposes to alter the collision avoidance requirements for uninhabitable objects. Launches from federal ranges require screening for uninhabitable objects to meet Air Force or NASA requirements, therefore there most space launch operators are already familiar with the process and requirements. The FAA proposal creates a common standard for all commercial space launches. In proposed Sec. 450.169(a)(2) and (3), the screening for potential conjunctions would include avoidance of uninhabitable objects, active objects, and trackable debris. The required minimum separation distance would remain at 25 km, or a PC of 1 x 10-5, for active satellites. For those objects that are tracked and not active, such as debris, defunct rocket bodies, and dead or inactive satellites, for which the FAA currently has no requirement, the FAA proposes a required minimum separation distance of 2.5 km (approximately 1.6 statute miles), consistent with 18th SPCS screening practice. This proposed separation distance would provide increased safety for launches and reentries. The proposed screening would coincide with the screening for inhabitable objects and would cover the same time frames. This is consistent with current 18th SPCS operational procedures. Launch availability during the launch window is a concern of the FAA because excessive launch window closures could limit launch opportunities, increase the effects of prolonged airspace closures on aviation, and increase launch operations costs. The FAA analyzed previous U.S. launches--commercial, civil, and military--to determine the consequence to the launch window availability of adding uninhabitable objects as a mandatory launch collision avoidance requirement. Of the worldwide launches between September 2011 and June 2012, the maximum impact was the closing of approximately 12% of the launch window. The average impact was only 2% of each launch window closed due to launch collision avoidance accounting for both inhabitable and uninhabitable objects. This level of impact was validated for launch closures for launches conducted in 2017. The worst-case scenarios for launch collision avoidance are launches of low inclination that pass through the densest part of the low earth orbit (LEO) population, around 800 km (approximately 497 statute miles) in altitude. The FAA believes implementing collision avoidance for inhabitable objects, active satellites, and trackable debris would adequately prevent collisions without placing excessive restrictions on launch opportunities. The FAA seeks comment on the potential impact of implementing these requirements. v. Accounting for A Conjunction Up to 3 Hours After Launch The current FAA requirement for screening time is one orbit (at least 100 minutes) plus 10 minutes padding.\138\ The current Federal screening practice at the 18th SPCS covers 3 hours. The FAA proposes to adopt 18th SPCS's current practice as the minimum standard to ensure the necessary level of safety to inhabitable and active space objects and to avoid the generation of space debris. Under proposed Sec. 450.169(b), the collision avoidance analysis for orbital launches would have to account for a conjunction that could occur up to 3 hours after launch. This change would be in line with practices for Federal launches. In actual practice, the 18th SPCS performs an analysis from launch to about 3 hours against all objects and debris in the catalog. However, commercial launchers currently can request screening through only one orbit after launch. ---------------------------------------------------------------------------

\138\ 14 CFR 417.107(e)(1)(ii)(B). ---------------------------------------------------------------------------

Pre-launch collision avoidance analysis ensures there are no immediate conjunctions during orbital insertion and shortly thereafter but is dependent on pre-launch estimated trajectories. Extending this collision avoidance analysis to three hours post-launch provides sufficient time for creation of the first orbital element set (ELSET), at which point collision avoidance analysis begins being calculated using real positioning information. To create an ELSET, the Department of Defense uses multiple tracking information to establish the first ELSET and reduce the position error significantly. Once an ELSET has been created when the vehicle is on-orbit, an on-orbit collision avoidance analysis is routinely run out to 72 hours. Pre-launch collision avoidance analysis is the only possible method to prevent a collision until that first ELSET is created.

[[Page 15350]]

There is a significant collision avoidance warning time gap between the end of 18th SPCS's 3-hour launch screening time and when 18th SPCS determines an ELSET. Pre-launch collision avoidance analysis beyond 3 hours is currently of limited utility. As positional errors based on predicted trajectories grow, data validity becomes increasingly suspect. Additionally, it is possible to create large launch window closures or even close the launch window entirely. Therefore, without a significant development in prediction calculation fidelity and accuracy, the FAA proposes to extend pre-launch collision avoidance to 3 hours. The accuracy of pre-launch collision avoidance analysis would be dependent on the accuracy of the trajectories provided. This 3-hour extension is important to protect inhabitable objects on-orbit. The ISS incurs collision risk from every launch. There is a warning time gap between the end of the pre-launch collision avoidance analysis and the start of on-orbit collision analysis done by the 18th SPCS. Until the 18th SPCS can determine the ELSET, the location of upper stages, payloads, and any released debris is unknown. During that time, whether the ISS is at risk from a collision would also be unknown. Extending the pre-launch collision avoidance requirement from one orbit to 3 hours would codify current practice. Additionally, although not required by FAA regulation, operators should promptly provide the 18th SPCS positional updates after orbital insertion until such time as the ELSET is established and on-orbit collision avoidance analysis commences. The FAA proposes to remove the requirements to expand the collision avoidance analysis screening time by 10 minutes to ensure that the entire first orbit of the launch vehicle is screened in sections A417.31(c)(7)(iv) and C417.11(d)(7)(iv). The expanded screening time required by those appendices would be unnecessary if the FAA extends the screening to 3 hours as described in proposed Sec. 450.169(b). vi. Submitting Collision Avoidance Inputs to the FAA Proposed Sec. 450.169(f) would require a launch operator to submit launch collision avoidance trajectory data to both AFSPC and the FAA. The current regulations only requires an operator to submit the data to the AFSPC. However, the AFSPC does not review launch operator data to ensure it complies with FAA requirements. The proposal would ensure the FAA receives and reviews the same data that is provided to AFSPC for launch collision avoidance. As this data is generally submitted electronically, sending the data to both the FAA and AFSPC is not expected to increase cost or paperwork burden of the submission. Direct submission to AFSPC and the FAA will facilitate a quicker response to the operator than having the FAA act as a middleman between the operator and AFSPC, and enables coordination throughout the process. In the past, the FAA has found discrepancies between operator trajectory data and operator requests to AFSPC for specific launch collision avoidance analysis methods. On multiple occasions, operators have misapplied existing launch collision avoidance regulations. To ensure proper application of launch collision avoidance regulations the FAA must be able to review the launch collision data. A specific example of a discrepancy occurred when a launch operator directed the exclusion of the ISS from launch collision avoidance analysis in a request to AFSPC. The launch operator incorrectly assumed the protections for the ISS, the ultimate destination for one of the launched payloads, did not apply. In actuality, the planned rendezvous with the station was days into the mission, and not all objects launched were planned to rendezvous with the ISS. Collision avoidance analysis should have been requested for all launched objects against the catalog of space objects, including the ISS. FAA review of launch collision avoidance trajectory data would have identified that oversight. vii. Appendix A to Part 450--Collision Analysis Worksheet The FAA proposes to consolidate the data input requirements of sections A417.31 and C417.11 and to clarify the data and process for collision avoidance in appendix A to part 450. Existing sections A417.31 and C417.11 provide nearly identical requirements for mission information. However, some elements are no longer useful or require an update to meet current practices. Specifically, proposed appendix A to part 450, paragraph (a)(1) mission name and launch location, paragraph (a)(2) launch or reentry window, paragraph (a)(3) epoch, time of powered flight, and point of contact remain the same as existing requirements. Proposed paragraph (a)(4) segment number has been updated to change the requirement to provide vector at injection to instead provide orbital parameters. The substantive requirement to identify how the operator would receive analysis results in current sections A417.31(c)(3) and C417.11(d)(3) also remains unchanged in proposed paragraph (b); however, minor editorial revisions were made to the examples of the transmission mediums provided to reflect modern technology. The proposed rule provides clarifications for some data elements. Specifically, the FAA proposes to change the requirement to identify orbital objects to evaluate contained in section A417.31(c)(9). As written, section A417.31(c)(9) requires the operator to identify the orbiting objects to be included in the analysis. In all cases the analysis must include all objects. However, the current practice is to identify the characteristics of the orbiting object, i.e., name, length, width, depth, diameter, and mass. The FAA proposes to capture current practice in proposed paragraph (a)(6). Also, the proposed appendix would replace ``vector at injection'' in sections A417.31(c)(5) and C417.11(d)(5), with orbital parameters at proposed paragraph (a)(5). The proposed change would require an operator to identify the orbital parameters for all objects achieving orbit including the parameters for each segment after thrust end instead of the vector at injection for each segment. This requirement would allow accurate COLA calculations that consider changes in trajectory after orbital insertion. The FAA also proposes to clarify the trajectory file requirements in proposed paragraph (d) of appendix A to part 450. Sections A417.31(c)(5)(ii) and C417.11(d)(5)(ii) require that current operators provide position and velocity for each launched object after burnout or deployment. This requirement severely lacks in clarity and completeness. Proposed paragraph (d) would provide a clearer requirement in line with current practices. Launch and reentry operators would be required to provide trajectory files with position and velocity for each object through the entire screening process, not exclusively after burnout. The current practice at Federal ranges is to provide data through the entire screening process, therefore the FAA proposal is in line with current practices. Additionally, radar cross section and covariance (position and velocity) for probability of collision analysis would be required by proposed paragraph (d). These products are used in the analysis of potential collisions. Parts 431 and 437 require the same trajectory files for analysis, however the current regulations do not provide guidance on how to provide the products necessary to complete the analysis. Proposed Sec. 450.169 and appendix A to part 450 would provide

[[Page 15351]]

the necessary guidance for all launch and reentry analysis. Proposed (e) of appendix A to part 450 would provide the three possible screening methodologies--spherical, ellipsoidal, or probability of collision. These requirements were discussed previously in this section. 13. Safety at End of Launch Proposed Sec. 450.171 would include requirements aimed at preventing the creation of orbital debris. Proposed Sec. 450.171(a) is the same as Sec. 417.129 and substantively the same as Sec. 431.43(c)(3), which require certain measures to be taken by a launch operator to prevent the creation of orbital debris. The FAA is not proposing to update the substantive requirements for orbital debris mitigation in this rulemaking because it plans to do so in a future rulemaking. Proposed Sec. 450.171(b) would require an applicant to demonstrate compliance with the requirements in Sec. 450.171(a) in its application. This requirement is the same as Sec. 415.133, which applies to applications for the launch of an ELV from a non-Federal launch site. Proposed Sec. 450.171(b) would broaden the applicability of the application requirement to all launches. This is necessary because the importance of orbital debris mitigation has no relation to whether a launch takes place from a Federal or non-Federal launch site, or whether the launch vehicle is expendable or reusable. The expansion of the applicability of the application requirement is the only change related to orbital debris mitigation. As noted earlier, the substantive safety requirements remain the same. 14. Mishaps: Definition, Plan, Reporting, Response, Investigation, Test-Induced Damage As a part of its streamlining efforts, the FAA proposes four mishap-related actions, including a revised definition of anomaly. First, the FAA proposes to consolidate the many chapter III mishap- related definitions into a mishap classification system. Second, this proposal would consolidate existing chapter III requirements for mishap, accident investigation, and emergency response plans, and clarify and streamline reporting requirements. Third, the FAA proposes to redefine the term ``anomaly'' and expand its application to include licensed, and not just permitted, activities. Fourth, the FAA proposes to exempt pre-coordinated test-induced damage to property involved with the test from being a mishap. The FAA proposes using an overarching mishap classification system instead of separate terms for ``mishap,'' ``launch accident,'' ``reentry accident,'' ``launch incident,'' ``reentry incident,'' ``human space flight incident,'' and ``launch site accident.'' The proposed mishap classification system would streamline and clarify the current accident, incident, and mishap definitions to create four mishap categories organized by severity, from most severe (Class 1) to least severe (Class 4). This proposal would also eliminate the $25,000 monetary threshold from current ``mishap'' and accident terms. This proposal would consolidate parts 417 (Accident investigation plan), 420 (Launch site accident investigation plan), 431 and 435 (Mishap investigation plan and emergency response plan), and 437 (Mishap response plan), into a single section applicable to all types of licenses, permits, and vehicles. Additionally, the FAA proposes to update the definition of the term ``anomaly'' and relocate it from part 437 to part 401, making it applicable to licensed and permitted activities. Finally, the FAA proposes to exclude pre-coordinated test activities, resulting in damage to property owned by the operator and associated with test activities, from mishap consideration. This test-induced damage proposal provides permittees and licensees the freedom to conduct test activities that may result in damage to associated property, and the freedom to test without the need for a mishap investigation for foreseeable test failures. i. Mishap Definitions The FAA currently uses a variety of terms to describe the occurrence of an unplanned event during commercial launch, reentry, and site activities. The term ``mishap'' is a broad term encompassing several of these unplanned events. Mishap, as currently defined in Sec. 401.5, means a launch or reentry accident, launch or reentry incident, launch site accident, failure to complete a launch or reentry as planned, or an unplanned event or series of events resulting in a fatality or serious injury (as defined in 49 CFR 830.2), or resulting in greater than $25,000 worth of damage to a payload, a launch or reentry vehicle, a launch or reentry support facility, or government property located on the launch or reentry site.\139\ As the definition shows, the term ``mishap'' captures 15 specific kinds of unplanned events,\140\ including five types of accidents and incidents. These are launch accident, reentry accident, launch incident, reentry incident, and launch site accident. These terms are defined separately in Sec. Sec. 401.5 and 420.5. Mishap also includes unplanned events resulting in failure to complete a mission as planned, a fatality or serious injury, or damages greater than $25,000 to certain property associated with the licensed or permitted activity. ---------------------------------------------------------------------------

\139\ Section 401.5. \140\ (1) Launch accident; (2) reentry accident; (3) launch incident; (4) reentry incident; (5) launch site accident; (6) failure to complete a launch as planned; (7) failure to complete a reentry as planned; (8) an unplanned event resulting in a fatality; (9) an unplanned event resulting in a serious injury; (10) an unplanned event resulting in greater than $25,000 worth of damage to a payload; (11) an unplanned event resulting in greater than $25,000 worth of damage to a launch vehicle; (12) an unplanned event resulting in greater than $25,000 worth of damage to a reentry vehicle; (13) an unplanned event resulting in greater than $25,000 worth of damage to a launch support facility; (14) an unplanned event resulting in greater than $25,000 worth of damage to government property located on the launch site; or (15) an unplanned event resulting in greater than $25,000 worth of damage to a reentry site. ---------------------------------------------------------------------------

The terms ``launch accident,'' ``reentry accident,'' and ``launch site accident,'' which are encompassed by the mishap definition, all include the occurrence of a fatality or serious injury to persons not associated with the activity and damage to property not associated with the activity exceeding $25,000. Unlike the term ``launch site accident,'' launch and reentry accidents account for the occurrence of a fatality or serious injury to a space flight participant or crew member during FAA-regulated activities. Other factors may also satisfy the various accident definitions. For instance, for launches involving an ELV, impacts of a launch vehicle, its payload, or any component thereof outside designated impact limit lines constitute an accident. If, however, the launch involves an RLV, impacts outside the designated landing site constitute an accident. In contrast, the definition for reentry accident makes no distinction between expendable and reusable vehicles. For reentry accidents, if the vehicle, its payload, or any component thereof lands outside a designated reentry site, the FAA deems it an accident. Similarly, although launch incidents and reentry incidents are both incidents, their definitions consist of different requirements. Launch and reentry incidents occur due to the malfunction of a FSS or other safety-critical system, or a failure of the operator's safety organization, design or operations. The FAA proposes to consolidate these

[[Page 15352]]

terms into a single mishap classification system eliminating the need for multiple terms. Current definitions of mishap and accident also include a $25,000 monetary threshold that is arbitrary and outdated. Experience has shown that even minor damage that does not pose a threat to public safety can easily exceed the $25,000 monetary threshold, triggering potentially costly and burdensome notification, reporting, and investigation requirements. For example, a relatively minor unplanned event following a successful launch could result in damages to ground support equipment or launch facilities exceeding $25,000. The ARC noted the amount is outdated and does not necessarily reflect safety implications. Additionally, the conditions listed under the current definitions do not necessarily reflect the severity of consequences and associated public safety risks. A better mishap classification system would provide consistency of mishap thresholds and applicability to all types of operations, mitigating potential confusion. Rather than adding more definitions, the FAA would consolidate and replace the existing accident, incident, and mishap definitions with a mishap classification system that would be defined in Sec. 401.5 and would apply to all licensed and permitted activities. Under the proposed changes, ``mishap'' would mean any event, or series of events associated with a licensed or permitted activity, that meets the criteria of a Class 1, 2, 3 or 4 mishap. The FAA would use this overarching definition to describe any mishap type occurring during permitted or licensed activities regardless of classification or consequence threshold. The FAA's proposal was informed by existing NASA and Air Force mishap classification system definitions,\141\ and NTSB definitions.\142\ ---------------------------------------------------------------------------

\141\ NPR 8621.1C, NASA Procedural Requirements for Mishap and Close Call Reporting, Investigating, and Recordkeeping. Air Force Instruction 91-204, Safety Investigation and Hazard Reporting. \142\ As defined in 49 CFR 830.2. ---------------------------------------------------------------------------

A ``Class 1 mishap'' would mean any event resulting in a fatality or serious injury to any person who is not associated with the licensed or permitted activity (e.g., members of the public) along with any space flight participant, crew, or government astronaut. The FAA would be adopting the definition of fatality or serious injury from 49 CFR 830.2. To constitute a Class 1 mishap, the fatality or injury must result from licensed or permitted activity, including ground operations at a launch or reentry site. A Class 1 mishap would be a mishap that has the highest consequences and greatest impact on public safety. The proposed Class 1 mishap definition would incorporate existing fatality and serious injury criteria from current ``launch accident,'' ``reentry accident'' and ``launch site accident'' definitions. On November 25, 2015, the U.S Commercial Space Launch Competitiveness Act was signed into law (Pub. L. 114-90). This law amends 51 U.S.C. 50901(15) by inserting ``government astronauts'' after ``crew'' each place it appears. In accordance with this amendment, and to ensure Class 1 mishap criteria applies equally to all persons on board a launch or reentry vehicle, the FAA Class 1 mishap definition includes government astronauts. The definition would only cover fatalities or serious injuries to crew, Government astronauts, spaceflight participants, or uninvolved public. The definition of Class 1 mishap would not cover other persons associated with the launch or reentry, similar to the current accident definitions for which it replaces. The proposed Class 1 Mishap also consolidates existing accident definitions, which would include potential recovery site accidents that were previously not defined. The FAA proposes to define a ``Class 2 mishap'' as any unplanned event, other than a Class 1 mishap, resulting in a malfunction of a safety-critical system, a failure of the safety organization or procedures, substantial damage to property not associated with the operation, or a high risk of causing a serious or fatal injury to any space flight participant, crew, government astronaut, or member of the public. The Class 2 mishap definition would encompass the current definitions of a ``launch incident,'' ``reentry incident,'' and ``human space flight incident.'' The definition would use a substantial damage to uninvolved property requirement instead of the $25,000 damage threshold. Under this proposal, the FAA would make a case-by-case determination whether the damage to public property is substantial. This evaluation may be based on, but not limited to, direct replacement cost, repair cost, and the property's intended use and functionality. For example, structural damage to public property exceeding 50 percent of its market value may be deemed as substantial damage. This approach potentially reduces the burden on the commercial space industry and Federal government by providing flexibility on the determination of substantial damage and the scope of the resulting investigation. This is consistent with the ARC feedback. Other criteria--such as events posing a high risk of causing a serious or fatal injury to any space flight participant, crew, government astronaut, or member of the public--are based on the existing ``human space flight incident'' definition and expanded to include government astronauts and members of the public. With this criterion, the FAA intends to cover events akin to a near miss in the aviation industry and is consistent with the Air Force and NASA practices. The addition of ``members of the public'' is consistent with the FAA's public safety mission. The FAA's goal is to evaluate the event type by impact to public safety. The FAA proposes to define ``Class 3 mishap'' as any unplanned event, other than a Class 1 or Class 2 mishap, resulting in permanent loss of a vehicle during licensed activity or the impact of a vehicle, its payload, or any component thereof outside the planned landing site or impact area. This change would differentiate between licensed launches and reentries and permitted launches and reentries. The FAA believes this proposal captures the intent of the current mishap definition that includes the failure to complete a launch or reentry as planned criterion. At the same time, the separation of licensed and permitted operations between Class 3 and 4 mishaps is also consistent with ARC feedback. The FAA would consider debris impacts outside of defined limits to meet the Class 3 mishap definition, provided the event did not satisfy the criteria of a Class 1 or 2 mishap. Impacts of launch vehicle debris outside designated impact limit lines are currently considered a launch accident. The FAA proposes to define a ``Class 4 mishap'' as an unplanned event, other than a Class 1, Class 2, or Class 3 mishap, resulting in permanent loss of a vehicle during permitted activity, a failure to achieve mission objectives, or substantial damage associated with licensed or permitted activity. The FAA intends proposed ``Class 4 Mishap'' to capture other events with the potential for future public safety implications without directly affecting public safety during occurrence. For example, an operator may have complete loss of a permitted vehicle in a remote and unpopulated area. Although the loss may not have resulted in fatalities, serious injuries, or public property damage on this occasion, it is important to find the root cause of the mishap. Otherwise, if the operator does not identify and address the underlying

[[Page 15353]]

cause, it may endanger public safety during a future launch in different conditions. ii. Anomaly Definition The FAA proposes to change the definition of ``anomaly'' and to move the definition to Sec. 401.5, where it would apply to all of chapter III. Anomaly would mean any condition during a licensed or permitted activity that deviates from what is standard, normal, or expected, during the verification or operation of a system, subsystem, process, facility, or support equipment. The inclusion of anomaly in Sec. 401.5 would clearly define the expectation of post-operation reporting for all licensed or permitted operations. It would also capture off-nominal events that do not fall under the thresholds of Class 1-4 mishaps as part of the required post-launch report. The FAA currently defines anomaly only in part 437. Part 437 defines an anomaly as a problem that occurs during verification or operation of a system, subsystem, process, facility, or support equipment. Section 437.73 requires strict recording, reporting, and implementation of corrective actions in the event of a public safety related anomaly. Section 417.25(c)(1), applicable to ELVs, requires operators to report an anomaly that occurred during launch countdown and flight in the post-launch report but does not define anomaly. Although part 431 does not have specific anomaly reporting requirements, in practice, the FAA requires operators to report anomalies. To ensure anomaly reporting, the FAA has begun adding a term and condition to launch licenses requiring operators to report anomalies prior to the next launch. The FAA uses anomaly reporting to track vehicle-related issues and to ensure an operator mitigates those issues prior to future flights. Given that not all anomalies are identified during flight, the post-launch reporting requirement allows the operator to review countdown and flight data for off-nominal conditions and report any anomalous condition to the FAA as a part of the post-launch report. Although an anomaly is defined in Sec. 437.3, as ``a problem that occurs during verification or operation of a system, subsystem, process, facility, or support equipment,'' it is not defined in part 415, 417, 431, or 435, and hence, it is applicable only to experimental permits. However, Sec. 417.25--Post launch report, requires an operator to ``identify any discrepancy or anomaly that occurred during the launch countdown or flight.'' The FAA is proposing to update the existing definition of an anomaly to ``any condition during a licensed or permitted activity that deviates from what is standard, normal, or expected, during the verification or operation of a system, subsystem, process, facility, or support equipment.'' The proposed definition seeks only to clarify what a ``problem'' is by adding ``deviates from what is standard, normal, or expected.'' iii. Mishaps--Reporting, Response, and Investigation Requirements The FAA proposes to consolidate current chapter III mishap plan, reporting, response and investigation requirements into proposed Sec. 450.173. The FAA seeks comment on its proposed approach, as discussed below, to mishap requirements, including reporting. Current title 14 CFR chapter III requirements for mishap and accident reporting, response, and investigation requirements are inconsistent and create confusion. For that reason, the FAA's proposed changes would apply to mishap requirements for launch and reentry licenses, experimental permits, and launch and reentry site licenses. Proposed Sec. 450.173 would replace Sec. Sec. 417.111(h) (Accident Investigation Plan), 417.415(c) (Post launch and post flight hazard controls), and 431.45 (Mishap investigation plan and emergency response plan). The proposed mishap plan changes to Sec. Sec. 420.59(a) (Mishap) and 437.41 (Mishap plan) would require an operator to meet the requirements of Sec. 450.173. The inconsistencies in the FAA's current regulatory scheme, including signature requirements for mishap plans, has led to much confusion. For example, Sec. 417.111(h) requires an operator to implement a plan containing the launch operator's procedures for reporting and responding to launch accidents, launch incidents, or other mishaps. It also requires two signatures, one from an individual authorized to sign and certify the application, and another from the designated safety official. Similarly, Sec. 420.59 requires that licensed launch site operators develop and implement a launch site accident investigation plan that contains the licensee's procedures for reporting, responding to, and investigating launch site accidents and for cooperating with Federal officials in case of a launch accident. It also requires a signature from an individual authorized to sign and certify the application, but not from the designated safety official like Sec. 417.111(h). Current Sec. 431.45 requires an RLV operator to submit a mishap investigation plan (MIP) containing the applicant's procedures for reporting and responding to launch and reentry accidents, launch and reentry incidents, or other mishaps that occur during the conduct of an RLV mission. It also requires that an RLV operator submit an emergency response plan (ERP) containing procedures for informing the affected public of a planned RLV mission. The FAA requires that an individual authorized to sign and certify the license application, the person responsible for the conduct of all licensed RLV mission activities, and the designated safety official, sign the MIP and ERP. In contrast, Sec. 437.41 does not require any signatures. To ensure consistency between all title 14 CFR chapter III requirements, the FAA proposes to consolidate these requirements. The ARC noted that reporting requirements for mishaps not involving a fatality or serious injury are unclear and left up to the operator to determine. The ARC said the FAA should define a minimum standard for a reportable mishap, in addition to a minimum set of investigation and reporting requirements, including information that should be provided during initial notification. Current notification requirements are generally consistent for a launch, reentry, launch site accident, launch or reentry incident, or mishap involving a fatality or serious injury. In those instances, regulations throughout title 14 CFR chapter III require that operators provide immediate notification to the FAA's Washington Operations Center (WOC).\143\ This is not the case when a mishap does not involve a fatality or serious injury.\144\ For example, part 417 requires notification within 24 hours to the Associate Administrator for Commercial Space Transportation or to the FAA WOC in the event of a mishap that does not involve a fatality or serious injury. In contrast, parts 431 and 437 only require 24-hour notification to the Associate Administrator for Commercial Space Transportation, but not to the FAA WOC for a mishap that does not involve a fatality or serious injury. Current part 420 does not require a launch site operator to provide a 24-hour mishap notification. If a mishap occur during non-business hours, this raises the possibility that a launch operator may be unable to report it to the Associate Administrator for Commercial Space Transportation, which would create the potential for a

[[Page 15354]]

non-compliance. To address these issues, the FAA proposes to provide a single source for all initial mishap notifications. The single source would be the FAA's WOC, a 24-hour, seven-day, operational facility. ---------------------------------------------------------------------------

\143\ 14 CFR 417.111(h)(1)(i), 420.59(b)(1), 431.45(b)(1), and 437.75(a)(1). \144\ 14 CFR 417.111(h)(1)(ii), 431.45(b)(2), and 437.75(a)(2). ---------------------------------------------------------------------------

Parts 417, 420, 431, and 437 all require an operator to submit a written preliminary report within five days \145\ of either an accident or incident to the FAA, Associate Administrator for Commercial Space Transportation. The five-day report is a follow-up requirement designed to supplement initial mishap notification once more detailed information is known. Under the proposed mishap classification system and mishap plan requirements, all mishaps would have similar reporting requirements. The FAA believes the proposed mishap classification system would save the operator time and resources during the initial mishap response by eliminating the need to evaluate whether the event is an accident, incident, or mishap. This streamlining of reporting requirements reduces the burden of unclear reporting requirements noted by the ARC. ---------------------------------------------------------------------------

\145\ 14 CFR 417.111(h)(1)(iii), 420.49(b)(2), 431.45(b)(3), and 437.75(a)(3). ---------------------------------------------------------------------------

Based on past examples, the five-day report is usually only one to three pages in length, requiring minimal time to compose. The FAA will use the information contained within the five-day report to ensure the mishap has been properly classified and the proper level of investigation and FAA oversight is being conducted. The FAA believes the time required to complete the five-day report is minimal and that by providing a clear expectation of required report contents in the event of all mishap types will eliminate confusion and ultimately result in time-savings. Response plan requirements for containing and minimizing the consequences of a mishap and for ensuring the preservation of data and physical evidence are generally consistent throughout license types with some exceptions. For instance, the regulations require that a launch site operator's plan include procedures for reporting and cooperating with FAA and NTSB investigations, and for designating one or more points of contact. Additionally, licensees must identify and adopt preventive measures for avoiding recurrence of the event. Current investigation requirements are also generally consistent across license types. The FAA currently requires that operators investigate the cause of a launch, reentry, or launch site accident, launch or reentry site incident, or mishap across license types.\146\ After the investigation, an operator must report investigation results to the FAA and delineate responsibilities for personnel assigned to conduct the investigation and for anyone retained by the operator to participate in an investigation. Section 420.59(e)(1) also requires that a launch site operator's investigation plan include procedures for participating in an investigation of a launch accident for launches launched from the launch site. ---------------------------------------------------------------------------

\146\ 14 CFR 417.111(h)(3), 420.59(d)(3), 431.45(d), and 437.75(c). ---------------------------------------------------------------------------

To ensure vehicle recovery can be conducted safely and effectively and with minimal risk to the public, part 431 operators must submit an ERP containing the operator's procedures for notifying local officials of unplanned and offsite landings. In addition, these operators must provide a plan for informing the public potentially affected of the estimated date, time, and landing location for the reentry activity. This information must be provided in layman's terms. These requirements are unique to operations conducted under part 431. Section 417.415(c)'s post-launch and post-flight-attempt hazard controls require that an operator establish procedural controls for hazards associated with an unsuccessful flight where the launch vehicle has a land or water impact. These procedures ensure the evacuation and rescue of members of the public, the dispersion and movement of toxic plumes, identifying areas of risk, and communication with local government authorities. Additionally, these procedures require that an operator extinguish fires, secure impact areas, evacuate members of the public, prevent unauthorized access, and preserve evidence. Lastly, the operator must ensure public safety from hazardous debris and have plans for the recovery, salvage, and safe disposal of debris and hazardous materials. For all FAA-licensed operations, proposed Sec. 450.173 would require that an operator report, respond, and investigate class 1, 2, 3, and 4 mishaps, using a plan or other written means.\147\ ---------------------------------------------------------------------------

\147\ For purposes of the preamble discussion regarding proposed Sec. 450.173, the term ``mishap plan document'' is used to encompass a plan or other written means. ---------------------------------------------------------------------------

An approved mishap plan document would be eligible for reuse with other specific or similar vehicles, sites, and operations. This would ease the burden on industry. For example, a permittee applying for a license or a current licensee applying for a different type of license, would be able to use the same written mishap plan document previously developed because the requirements would be the same regardless of license type. This mishap plan document would include notification to local officials should a mishap cause the vehicle to land offsite, such that a coordinated effort can be made to protect the public. Provided emergency response requirements such as coordinated emergency response agreements remain current, a permittee can submit a mishap response plan developed for permitted operations to satisfy the mishap plan document application requirements under a license. Additionally, the FAA would not have to evaluate the same company differently depending on the permit or license type. This would reduce time and cost for the industry and the FAA while maintaining the same level of public safety. iv. Discussion of the Mishap Plan--Reporting, Response, and Investigation Proposed Requirements Proposed Sec. 450.173 would eliminate all mishap plan signature requirements. The requirement that the person certifying the accuracy of the application also sign the mishap plan document is not necessary because by signing the application, the operator is already certifying that the components thereof, including the mishap plan document, are accurate. Additional signatures (e.g., from the safety official or mission director) are also unnecessary as the roles and responsibilities for personnel implementing the mishap plan document are contained in the plan itself. Eliminating the signature requirements would provide operators with the flexibility to assign personnel to implement a mishap plan document without having to resubmit a signed document to the FAA. Proposed Sec. 450.173(a) would require an operator to report, respond, and investigate class 1, 2, 3, and 4 mishaps according to paragraphs (b) through (h) of Sec. 450.173, using a plan or other written means. Proposed Sec. 450.173(b)(1) would require that an operator document the responsibilities for personnel assigned to implement the requirements of proposed Sec. 450.173. Proposed Sec. 450.173(b)(2) would require an operator to document reporting responsibilities for personnel assigned to conduct investigations and for anyone retained by the licensee to conduct or participate in investigations. Proposed Sec. 450.173(b)(3) would require an operator to document the allocation of roles and responsibilities between the launch operator and any site operator for reporting, responding to, and

[[Page 15355]]

investigating any mishap during ground activities at the site. Further, proposed Sec. 450.173(c) would require an operator to report to, and cooperate with, FAA and NTSB mishap investigations. Also, it would require that the operator identify one or more points of contact for the FAA and NTSB. This proposal does not substantively change current requirements to report, cooperate, and designate points of contact. Any changes from current regulations would be made merely for clarification purposes. In the event of an FAA- or NTSB-led investigation, the FAA would not require an operator to perform an independent internal investigation because it would be a party to the investigation. However, the operator would remain responsible for reporting investigation results to the FAA, which would include any government- generated or independent investigation reports as well as party submissions. In the event of an operator-led investigation under FAA oversight, the operator's investigation would be the primary investigation, although the FAA may grant official observer status to U.S. Government representatives (e.g., NASA, the Air Force). As official observers, these representatives would be integrated into the operator's investigation to the extent the FAA finds appropriate. These U.S. Government entities may decide to conduct their own investigation independent of FAA oversight, although the FAA and NTSB have primary jurisdiction. Proposed Sec. 450.173(d) would establish mishap reporting requirements applicable to all operations, vehicles, or mishap types. Proposed Sec. 450.173(d)(1) would require that an operator immediately notify the FAA WOC in case of a mishap involving a fatality or serious injury. Immediately would continue to mean notification without delay. The immediate notification should not hamper emergency response activities. Proposed Sec. 450.173(d)(2) would require that operators report other mishaps not involving a fatality or serious injury to the WOC within 24 hours. This would eliminate the current option to notify the Associate Administrator for Commercial Space Transportation instead of the WOC because the WOC, unlike the Administrator for Commercial Space Transportation, is available 24-hours per day, 7 days per week. Proposed Sec. 450.173(d)(3) would require operators to submit a written preliminary report to the FAA Office of Commercial Space Transportation within five days of any mishap. The report would need to include the information listed in proposed Sec. 450.173(d)(3). This list of information would include the operator's assessment on how the cause of its mishap could potentially affect similar vehicles, systems, or operations. Given some systems and components are common across operators, this information could prevent mishaps due to similar failures of a common system or component, including ground and range systems. The reporting requirements in this paragraph are similar to existing five-day reporting requirements. Under current regulations, a five-day preliminary written report was only required in the event of an accident or incident. Based on lessons learned from past mishaps, the FAA is streamlining these reporting requirements to ensure consistency between mishap classes and that information required to properly classify a mishap and the level of investigation required are reported. For example, mishaps involving a fatality or serious injury are typically investigated at the Federal level, as such, the FAA is aware of the information that may affect the safety of the public or public property. The operator, in accordance with their mishap plan, may investigate mishaps not involving a fatality or serious injury. In such cases, it is possible that the FAA may not become aware of information potentially affecting the public safety or public property in a timely manner, or other facts that may require elevating the class of mishap to a higher level. Proposed Sec. 450.173(e) sets emergency response requirements. Proposed Sec. 450.173(e)(1) would require that an operator activate emergency response services following a mishap. This requirement is consistent with the post-launch and post-flight attempt hazard controls in current Sec. 417.415. Proposed Sec. 450.173(e)(2) would require that an operator maintain existing hazard area surveillance and clearance as necessary to protect public safety. These notices would include NOTAM and NOTMAR. Proposed Sec. 450.173(e)(3) would require that an operator contain and minimize the consequences of a mishap. Proposed Sec. 450.173(e)(4) would provide for the preservation of data and physical evidence, including debris, which the FAA considers to be a physical record. In an effort to contain and minimize the consequences of the mishap and maintain site integrity for investigation, an operator would need to safe and secure the mishap site in a timely manner. Proposed Sec. 450.173(e)(4) is consistent with current requirements. Proposed Sec. 450.173(e)(5) would require an operator to implement agreements with local government authorities and emergency response services, as necessary. Emergency response procedures should identify who is responsible for securing the mishap site, and procedures for access to the mishap site. For example, the procedures should identify who is responsible for educating persons on the treatment of debris, and the disposal of hazardous materials. The FAA recommends that prior to beginning operations, an operator coordinate with Federal, state, and local authorities and emergency first responders to familiarize them with permitted and licensed operations and hazards associated with an operator's activities, such as launch vehicle hazards. This pre-coordination is important to ensure the safety of emergency personnel responding to the mishap. Vehicle and operational hazards may include vehicle composites, propellants, oxidizers, pressure vessels, unexploded ordnance, oxygen systems, and batteries. If implemented, proposed Sec. 450.173(f) would require an operator to investigate the root causes of a mishap and report the results to the FAA. Proposed Sec. 450.173(g) would require that an operator identify and implement preventive measures prior to the next flight, unless otherwise approved by the Administrator. The FAA is proposing that preventive measures be implemented prior to the next flight in all cases in order to codify current practice. The FAA would work with operators on a case-by-case basis to determine whether its next operation may proceed if it is unable to implement preventive measures before the next flight. The requirement to implement corrective action prior to next flight is consistent with existing requirements in Sec. 437.73(d) for anomaly recording, reporting, and implementation of corrective actions. Proposed Sec. 450.173(h) would require that an operator maintain records associated with a mishap in accordance with proposed Sec. 450.219(d) (Records). The operator would make these records available to Federal officials for inspection and copying. This requirement is consistent with existing record keeping requirements.\148\ Records would include debris, which the FAA considers a physical record. In all mishap cases, disposal of any related debris would be required to be coordinated with the FAA. Note that this proposal would allow for the sharing of proposed Sec. 450.173

[[Page 15356]]

responsibilities between launch and reentry operators pursuant to an agreement. For example, the site operator may report the mishap occurrence to the FAA as required by proposed Sec. 450.173(d), while the emergency response requirements of proposed Sec. 450.173(e) may be shared by both the launch or reentry operator and site operator. An operator would be required to retain all records until completion of any Federal investigation and the FAA advises the operator that the records need no longer be retained. ---------------------------------------------------------------------------

\148\ Sections 417.15(b), 420.61(b), 431.77(b), and 437.87(b). ---------------------------------------------------------------------------

Finally, proposed Sec. 450.173(i) would set application requirements. This section would require the submission of the mishap plan document at the time of license or permit application. v. Test-Induced Damage The FAA proposes to introduce a test-induced damage exception to the mishap definition in proposed Sec. 450.175 (Test-induced Damage). This proposal would allow an operator to coordinate testing activities with the FAA before the activities take place to prevent the FAA from labeling failures as mishaps. Any test failure covered by this section would be considered test-induced damage and not a mishap, so long as the failure falls within the pre-coordinated and FAA-approved testing profile. The test-induced damage concept is not currently within the FAA's commercial space regulations. This proposal is due to the FAA's recognition that current mishap regulations may deter the kind of robust testing that may yield future safety benefits. The FAA currently deems a failure to achieve test objectives as a mishap (failure to complete a launch or reentry as planned). Similarly, a test failure that results in over $25,000 in damage to associated property would also be considered a mishap.\149\ In both cases, the resulting mishap designation would require a mishap investigation to identify root causes and preventive measures, which the operator would need to implement before the next operation. ---------------------------------------------------------------------------

\149\ ``[R]esulting in greater than $25,000 worth of damage . . .'' in accordance with the mishap definition in Sec. 401.5. ---------------------------------------------------------------------------

In the recent past, the FAA accepted the possibility of a test- induced damage approach by pre-coordinating with a launch operator prior to conducting an in-flight abort test of a crew escape system.\150\ The FAA found that this process worked well in pre- defining the objectives of the test, test limits, expected outcomes, and potential failure modes. It also allowed the operator and FAA to reach a common understanding of what events would be categorized as a test-induced damage or mishap. This approach would also be consistent with ARC feedback that the existing mishap definition leads to protracted mishap investigations because it does not recognize the difference between operational missions and higher risk experimental or test missions. The ARC and FAA believe this discourages robust testing to push the limits of a vehicle and undercutting test programs currently covered under experimental permits. ---------------------------------------------------------------------------

\150\ Given these events fell within the pre-coordinated possible scenarios, the FAA did not consider them unplanned events and therefore, did not consider the events mishaps. ---------------------------------------------------------------------------

As noted earlier, the ARC shared its concern that current mishap reporting and investigation requirements discourage robust testing. The FAA believes that the proposed test-induced damages paradigm addresses this concern by providing an opportunity for license applicants and existing license holders to pre-coordinate test activities and pre- declare damages that the FAA would not consider a mishap. Under this paradigm, failure to achieve identified test objectives and certain pre-declared damages to property associated with the licensed activity, including ground support equipment, ground support systems, and flight hardware would not be reportable as an FAA-mishap provided the requirements of this section are met. The FAA also proposes to replace its existing mishap related definitions in favor of a mishap classification system to further clarify the types of events that would be considered a mishap. Proposed Sec. 450.175(a) would lay out the specific conditions for the test-induced damage approach. It would require an operator to coordinate test activities with and obtain approval from the FAA before the planned activity. The coordination should take place with sufficient time for the FAA to evaluate the proposal during the application process or as a license modification. A test activity would need to be pre-coordinated with the FAA to be eligible for the test- induced damage mishap exception. The FAA would conduct pre-coordination activities during pre-application consultation. The test-induced damage exception would be optional and an operator would not be required to take this path. However, absent the test-induced damage exception, the FAA would categorize an unplanned event as a mishap in accordance with the proposed mishap classification system. Proposed Sec. 450.175(a)(2) would preclude certain kinds of mishaps from the test-induced damage alternative. Specifically, any mishap involving a serious injury or fatality, damage to property not associated with the licensed activity, or hazardous debris leaving the pre-defined hazard area would be treated as a mishap and not test-induced damage. Finally, proposed Sec. 450.175(a)(3) would require test-induced damage to fall within the scope of activities coordinated with the FAA to be eligible for this alternative. In other words, the FAA would consider the occurrence of damages resulting from test activities that fall outside the scope of approved activities (e.g., before scheduled test activities begin or exceeding operation limits) as a mishap in accordance with the proposed mishap classification system. The approved scope of the test would be outlined in the information submitted by the permittee or licensee to meet the application requirements of proposed Sec. 450.175(b). Proposed Sec. 450.175(b) would set the test-induced damage application requirements. The paragraph would list the information an applicant would need to submit under the test-induced damage alternative to mishap classification. The FAA does not intend the test- induced damage exception to apply to the operation of an entire vehicle, but rather the testing of specific components and systems. The applicant should submit test objectives in a complete, clear, and concise manner to help the FAA distinguish between nominal operations and specific test objectives. It should also provide test limits such as the expected environments, personnel, equipment, or environmental limits. Also, the applicant would identify expected outcomes that the FAA would later compare to actual outcomes. The FAA would also request a list of potential risks, including the applicant's best understanding of the uncertainties in environments, test limits, or system performance. Applicable procedures or steps taken to execute the tests and the expected time and duration of the test would also be required. Finally, the FAA may request additional information such as clarification information to ensure public safety, safety of property, and to safeguard the national security and foreign policy interests of the United States. This proposal is similar to NASA's test-induced damages process, as defined in NPR 8621.1C (NASA Procedural Requirements for Mishap and Close Call Reporting, Investigating, and Recordkeeping). NASA developed the test-induced damages paradigm in support of the December 2014 launch of Exploration Flight Test-1 and it has been in use supporting NASA test

[[Page 15357]]

programs ever since. The test-induced damages process is a formal process documenting the risk of damage and accepting that risk by signature before the test. Similar to the commercial space industry, NASA conducts tests to better understand and mitigate complex design, manufacturing, or operational issues with the objective of providing NASA with confidence that the system meets its technical and programmatic requirements and can successfully and safely perform its mission in the operational environment. As noted in NPR 8261.1C, some tests are designed and intended to result in hardware damage (e.g., a structural test-to-failure). Other tests are aggressive in nature, and test-incurred damage often occurs; the knowledge gained is used to improve designs. These statements hold true for the commercial space transportation industry as well. The FAA's proposed test-induced damages takes a NASA-proven process and tailors it to satisfy the FAA's public safety mission.

L. Pre- and Post-Flight Reporting

1. Preflight Reporting Under proposed Sec. 450.213, the FAA would continue to require a licensee to provide the FAA with specified information prior to each launch or reentry, consistent with current requirements. An operator would send the information as an email attachment to [email protected], or by some other method as agreed to by the Administrator in the license. The FAA would require five categories of information: mission-specific, flight safety analysis products, flight safety system test data, data required by the FAA to conduct a collision avoidance analysis, and a launch or reentry schedule. The first category would be mission-specific information in proposed Sec. 450.213(b). As currently required in Sec. Sec. 417.17(b)(2) and 431.79(a), an operator would be required to provide this information to the FAA not less than 60 days before each mission conducted under the license. The FAA may also agree to a different time frame in accordance with Sec. 404.15. An operator would not have to provide any information under this section if the mission-specific information was already provided in the application. This would be the case if an operator's license authorizes specific missions, as opposed to unlimited launches or reentries within certain parameters. Specifically, an operator would continue to have to provide payload information in accordance with proposed Sec. 450.43(i), and flight information, including the vehicle, launch site, planned flight path, staging and impact locations, each payload delivery point, intended reentry or landing sites including any contingency abort locations, and the location of any disposed launch or reentry vehicle stage or component that is deorbited. This section would combine the reporting requirements of Sec. Sec. 417.17(b)(2) and 431.79(a), although reporting the location of any disposed launch or reentry vehicle stage or component that is deorbited would be a new requirement. The FAA would add this information requirement because disposals are much more common now than when parts 417 and 435 were issued, and notifications to airmen and mariners would be necessary to protect the public from vehicle stages or components reentering as part of a disposal. In practice, licensees have arranged for the issuance of NOTAMs and NTMs for vehicle stages purposefully deorbited. The second category is flight safety analysis products in proposed Sec. 450.213(c). An operator would need to submit to the FAA updated flight safety analysis products, using previously-approved methodologies, for each mission no less than 30 days before flight. The FAA may also agree to a different time frame in accordance with proposed Sec. 404.15. The flight safety analysis products are similar to what is currently required under Sec. 417.17(c)(3). Part 431 does not require similar flight safety analysis products to be submitted, although current practice is to require similar information in license orders. An operator would not be required to submit flight safety analysis products if the analysis submitted in the license application already satisfies all the requirements of the section. This would be the case if a licensee's license authorizes specific missions, as opposed to unlimited launches within certain parameters. An operator would also not be required to submit flight safety analysis products if the operator demonstrated during the application process that the analysis does not need to be updated to account for mission-specific factors. This would be the case if an operator operates within certain operational constraints proven to satisfy public safety criteria. Otherwise, an operator would be required to submit flight safety analysis products while accounting for vehicle and mission specific input data and potential variations in input data that may affect any analysis product within the final 30 days before flight. An operator would also be required to submit the analysis products using the same format and organization used in its license application. Lastly, an operator would not be able to change an analysis product within the final 30 days before flight, unless the operator has a process, approved in the license, for making a change in that period as part of the operator's flight safety analysis process. The third category is flight safety system test data in proposed Sec. 450.213(d). If an operator would be required to use an FSS to protect public safety as required by proposed Sec. 450.101(c), it would need to submit to the FAA, or provide access to, any test reports in accordance with approved flight safety system test plans no less than 30 days before flight. The FAA may also agree to a different time frame in accordance with proposed Sec. 404.15. This reporting requirement is discussed earlier in the section for flight safety systems. The fourth category would be data required by the FAA to conduct a collision avoidance analysis in proposed Sec. 450.213(e). Not less than 15 days before the flight of a launch vehicle or the reentry of a reentry vehicle, an operator would need to submit the collision avoidance information in proposed Appendix A to part 450 to a Federal entity identified by the FAA, and the FAA. This reporting requirement is discussed in the ``Launch and Reentry Collision Avoidance Requirements'' section. The fifth category, as proposed in Sec. 450.213(f), a launch or reentry schedule that identifies each review, rehearsal, and safety- critical operation. The schedule would be required to be filed and updated in time to allow FAA personnel to participate in the reviews, rehearsals, and safety-critical operations. This is similar to current Sec. 417.17(b). 2. Post-Flight Reporting Under proposed Sec. 450.215, the FAA would require an operator to provide specified information no later than 90 days after a launch or reentry. The FAA may also agree to a different time frame in accordance with proposed Sec. 404.15. An operator would send the information as an email attachment to [email protected], or other method as agreed to by the Administrator in the license. Specifically, as discussed earlier, an operator would need to provide any anomaly that occurred during countdown or flight that is material to public health and safety and the safety of property,\151\ and any corrective action

[[Page 15358]]

implemented or to be implemented after the flight due to an anomaly or mishap. Section 417.25(b) and (c) requires similar information. Part 431 does not require post-flight information, although current practice is to require similar information in license orders. ---------------------------------------------------------------------------

\151\ What is material to public health and safety and the safety of property is discussed later in this preamble in reference to proposed Sec. 450.211(a)(2). ---------------------------------------------------------------------------

In addition, an operator would need to provide the actual trajectory flown by the vehicle, and, for an unguided suborbital launch vehicle, the actual impact location of all impacting stages and impacting components. The actual trajectory flown by the vehicle would be a new requirement, while the actual impact locations for an unguided suborbital launch vehicle is similar to the requirements in current Sec. 417.25(b) and (c). The FAA would use the actual trajectory flown by the vehicle to compare it to predicted trajectories. Because the FAA may not need this information for all launches, this information would only need to be reported if requested by the FAA. Lastly, an operator would need to report the number of humans on board the vehicle. This would be required because the FAA keeps a human space flight database for use by launch and reentry operators for the purposes of informed consent. Under Sec. 460.45(c), and pursuant to statute, an operator must inform each space flight participant of the safety record of all launch or reentry vehicles that have carried one or more persons on board, including both U.S. government and private sector vehicles, to include the total number of people who have died or been seriously injured on these flights, the total number of launches and reentries conducted with people on board, and the number of catastrophic failures. To facilitate all operators accurately informing space flight participants, the FAA maintains the human space flight database and populates it using voluntarily provided information from industry. As more launches and reentries are expected with humans on board, the FAA will require this information to keep the human spaceflight database up to date, and expects that this would not significantly increase the burden to operators.

Ground Safety

A. Definition and Scope of Launch

As discussed in more detail in this section, the FAA proposes to amend the definitions of ``launch'' and ``reentry'' in part 401 to mirror the statutory definitions. The FAA would move the beginning and end of launch to proposed Sec. 450.3, which defines the scope of a vehicle operator's license. Proposed Sec. 450.3(b) would establish that launch begins under a license with the start of hazardous activities that pose a threat to the public, and it would amend the end of launch language to remove any reference to ELVs and RLVs. Finally, the FAA proposes to clarify that, absent the launch vehicle, the arrival of a payload at the launch site would not trigger the beginning of launch. Also, at a non-U.S. launch site, launch would begin at ignition or take-off for a hybrid vehicle. Title 51 U.S.C. 50902 defines launch as to place or try to place a launch vehicle or reentry vehicle and any payload or human being from Earth in a suborbital trajectory; in Earth orbit in outer space; or otherwise in outer space, including activities involved in the preparation of a launch vehicle or payload for launch, when those activities take place at a launch site in the United States. The FAA added the current regulatory definition of launch in the 1999 final rule.\152\ The language in the regulatory definition differs slightly from the current statutory language regarding activities in preparation of the vehicle, and the regulatory definition does not include the reference to human beings because that reference was added to the statute after 1999.\153\ The regulatory definition also includes language that is not set forth in the statute pertaining to pre- and post-flight ground operations including language identifying the beginning of launch and end of launch. ---------------------------------------------------------------------------

\152\ 64 FR 19586 (April 21, 1999). \153\ As currently defined in 14 CFR 401.5, launch means to place or try to place a launch vehicle or reentry vehicle and any payload from Earth in a suborbital trajectory, in Earth orbit in outer space, or otherwise in outer space, and includes preparing a launch vehicle for flight at a launch site in the United States. The current definition also defines beginning and end of launch, which, as discussed later in the preamble, the FAA proposes to amend and move to proposed part 450 (Scope of a vehicle operator license). ---------------------------------------------------------------------------

The FAA and industry have identified a number of issues associated with the current definition of launch in Sec. 401.5. The current definition of launch is inflexible and has resulted in confusion regarding launch from non-U.S. sites and whether the arrival of a payload constitutes the beginning of launch. The preamble discussion in the 1999 final rule stated that the intent of the FAA's definition of ``launch'' is to require a license at the start of those hazardous preflight activities that put public safety at risk. The final rule stated that, in accordance with this responsibility, the FAA will exercise regulatory oversight only if an activity is so hazardous as to pose a threat to third parties. Specifically, the FAA determined that launch begins when hazardous activities related to the assembly and ultimate flight of the launch vehicle commence.\154\ The preamble further elaborated that the moment at which hazardous activities begin is when the major components of a licensee's launch vehicle enter, for purposes of preparing for flight, the gate of a U.S. launch site, regardless of whether the site is situated on a Federal launch range and regardless of whether flight occurs from that site.\155\ At the time, the FAA determined that the arrival of the launch vehicle at a U.S. launch site would trigger the beginning of launch for the following reasons: ease of administration, consistent and broad interpretation, and change in the level of risk.\156\ Additionally, the rule stated that shortly after vehicle components arrive, hazardous activities related to the assembly and ultimate flight of the launch vehicle begin and therefore the arrival of the vehicle or its parts is a logical point at which the FAA should ensure that a launch operator is exercising safe practices and is financially responsible for any damage it may cause.\157\ In accordance with the definition of launch, the FAA has required a launch license to be in place before the arrival of major components of a launch vehicle at a U.S. launch site that are intended for use on a specific FAA- licensed launch. ---------------------------------------------------------------------------

\154\ 64 FR 19586 (April 21, 1999), at 19591. \155\ 64 FR 19586 (April 21, 1999). \156\ 64 FR 19586 (April 21, 1999), at 19589. \157\ 64 FR 19586 (April 21, 1999), at 19591. ---------------------------------------------------------------------------

The lack of flexibility in the definition of beginning of launch has led to multiple requests from the industry to waive the requirement for a license to bring vehicle hardware on site and begin preflight activity.\158\ The FAA has issued numerous waivers because it determined that the proposed preflight activities associated with the arrival of launch vehicles or their major components were not so hazardous to the public as to require FAA oversight. In granting a waiver, the FAA determines that the waiver is in the public interest and will not jeopardize public health and safety, the safety of property, or any national security or foreign policy interest of the United States. In addition, by requesting a waiver to conduct preflight activities, the operator agrees that it must forgo the opportunity to seek indemnification for

[[Page 15359]]

any loss incurred under the waiver during the waived preflight activities. ---------------------------------------------------------------------------

\158\ As stated previously, the FAA is only able to waive regulatory requirements, not definitions, and therefore has issued waivers to the requirement to obtain a license, rather than to the definition of launch. ---------------------------------------------------------------------------

Further, the current definition does not account for the significant technological advances the industry has experienced since adoption of the 1999 rule. For example, in the current commercial space transportation environment, launch operations often include vehicles or vehicle stages that fly back to a U.S. launch site and remain at the launch site. In cases where no license was in place to cover the presence of flight hardware for possible reuse, consistent with 1999 rule preamble language, the FAA has deemed this to be storage and does not require a license or waiver.\159\ As currently written, however, the definition could imply that a license is required for RLV launches during the period between end-of-launch and launch vehicle reuse, even when the vehicle is in a safe and dormant state, and would not be a threat to public safety. ---------------------------------------------------------------------------

\159\ 64 FR 19586 (April 21, 1999), at 19593. ``On the other hand, the FAA does not intend a launch license to encompass components stored at a launch site for a considerable period of time prior to flight.'' ---------------------------------------------------------------------------

Because the current definition states that launch begins under a license with the arrival of a launch vehicle or payload at a U.S. launch site, the term ``or payload'' has been interpreted to mean arrival of a payload by itself could constitute beginning of launch. However, the 1999 preamble explicitly states that the FAA does not define launch to commence with the arrival of a payload absent the launch vehicle at a launch site.\160\ Also, it states that the FAA does not consider payload processing absent launch vehicle integration to constitute part of licensed activities.\161\ In addition, the 1999 rule preamble refers to launch beginning when the ``major components'' of a launch vehicle arrive at the launch site. However, the regulatory language remains unclear. ---------------------------------------------------------------------------

\160\ 64 FR 19586 (April 21, 1999), at 19589. \161\ 64 FR 19586 (April 21, 1999), at 19593. ---------------------------------------------------------------------------

Another point of current uncertainty is when launch begins from a non-U.S. site. Title 51 U.S.C. chapter 509 gives the FAA authority to issue a launch license to a U.S. citizen conducting a launch anywhere in the world. However, the current definition of launch is silent as to when launch begins from a non-U.S. site. This has resulted in operators lacking clarity as to when launch begins. In recent years, the FAA has licensed launches from international waters, Australia, the Marshall Islands, New Zealand, and Spain. In licensing these launches, the FAA has consistently interpreted that launch from outside of U.S. territory to begin at ignition or at the first movement that initiates flight, whichever occurs earlier. The ARC commented about the definition of launch for licensed launches from a U.S. launch site. The ARC report stated that launch should be defined on a case-by-case basis for all operators. The ARC recommended licensed activities on U.S. launch sites for all vehicles include preflight ground operations, flight operations, and launch operations phases as tailored by each launch operator. The ARC further recommends the initiation and scope of launch activities, including preflight ground operations and flight operation phases, be defined by the impact of each activity on public safety and property. These activities may include both hazardous and safety-critical operations, the latter encompassing non-hazardous activities that may impact public risk during other pre-launch and flight activities. A list of performance-based criteria for licensed activities would be tailored for each operator and the FAA based on their specific concept of operations. This scope should only include hazardous operations unique to activities as defined in the operator's license application documents and not activities already regulated by another government agency. In light of the multiple waiver requests and ARC recommendations, the FAA proposes to amend the regulatory definitions of launch and reentry (discussed later in this section) to match the statutory definitions. The FAA would also move the details in the definitions for beginning and end of launch (discussed later in this section) and reentry to the scope of a vehicle operator license requirements in proposed Sec. 450.3. In addition, the FAA would revise ``beginning of launch'' to be more performance-based and ``end of launch'' to remove references to ELVs and RLVs. Finally, the FAA proposes to clarify that launch from a non-U.S. site would begin at ignition, and that the arrival of a payload to a launch site does not constitute beginning of launch. The FAA believes the proposed revisions capture the primary intent of the ARC's recommendation, which is to limit FAA oversight to those launch operations that pose a hazard to public safety and the safety of property. The FAA would revise the definitions of launch and reentry in Sec. 401.5 to mirror the statutory definitions. Specifically, the FAA would remove the beginning and end of launch language from the definition of ``launch,'' and add the term ``human being'' to align with the 2015 update to the Act. Similarly, the FAA would revise the definition of ``reenter/reentry'' in part 401 to mirror the statutory definition, and would add the term ``human being'' to align with the 2015 update to the Act. The FAA would move the beginning and end of launch and reentry language to proposed Sec. 450.3. The FAA proposes this change because such detail in a definition makes the definition unwieldy and, unlike regulatory requirements, definitions cannot be waived. The FAA would amend beginning of launch such that launch begins with the first hazardous activities related to the assembly and ultimate flight of the launch vehicle at a U.S. launch site. Unless a later point is agreed to by the Administrator, hazardous preflight ground operations would be presumed to begin when the launch vehicle or its major components arrive at the launch site. For operations where an applicant identifies a later time when hazardous operations begin, the applicant may propose the event that it believes should constitute the beginning of launch during the pre-application process.\162\ As a result, there would be no need to request a waiver. ---------------------------------------------------------------------------

\162\ The FAA's proposal regarding how an operator would determine what event constitutes the beginning of launch, and how to obtain the Administrator's approval, is located in the Ground Safety section under the Identifying First Hazardous Activity sub-heading of this preamble. ---------------------------------------------------------------------------

This proposed change would also clarify that for launch vehicle stages or when launch begins for an RLV that returns to a launch site and remains there in a dormant state, FAA oversight is not necessary since no hazardous activity that falls under the FAA's oversight responsibilities are being performed. This proposal would clarify that, absent vehicle hardware, the arrival of payload does not constitute beginning of launch. Instead, launch would begin with the arrival of a launch vehicle or its major components at a U.S. launch site, or at a later point as agreed to by the Administrator. This proposal would also specify that launch from a non-U.S. site begins at ignition, or at the first movement that initiates flight, of the launch vehicle, whichever comes first. For hybrid vehicles, flight commences at take-off. The current ``beginning of launch,'' as defined in the definition of ``launch'' refers only to launches from a U.S. launch site, and is silent with regard to launches from sites outside the United States. Although the FAA issues launch licenses for launches from non-U.S. launch sites if the operator is a citizen

[[Page 15360]]

of the U.S., the FAA considers it outside its authority to license preflight activities that take place at a non-U.S. launch site in light of the statutory definition of launch that explicitly refers to ``activities involved in the preparation of a launch vehicle . . . when those activities take place at a launch site in the United States.'' The FAA also believes that this interpretation is necessary because of issues of sovereignty and liability under international law. For these non-U.S. launch sites, the FAA has historically licensed launches beginning at ignition, or if there is no ignition, then at the first movement that initiates flight. In order to provide clarity for launch operators launching from non-U.S. sites, the FAA is proposing to codify this approach in part 450. In addition to addressing issues in the current definition of ``launch'' regarding when launch begins, the FAA proposes to clarify when launch ends. First, the FAA would move the provisions in the current definition of launch regarding end of launch to proposed Sec. 450.3. Second, the FAA would remove the distinction between ELVs and RLVs, which is consistent with one of the overall goals of this proposed rule. Overall, the substance of the current provisions related to end of launch currently located in Sec. 401.5 would not change. Specifically, launch ends: 1. For an orbital launch of an ELV, after the licensee's last exercise of control over its vehicle whether on orbit or a vehicle stage impacting on Earth; 2. For an orbital launch of an RLV, after deployment of all payloads or if there is no payload, after the launch vehicle's first steady state orbit; and 3. For a suborbital launch of either an ELV or RLV that includes reentry, launch ends after reaching apogee; or for a suborbital launch that does not include a reentry, launch ends after the vehicle or vehicle component lands or impacts on Earth. In all these cases, activities on the ground to return either the launch site or the vehicle or vehicle component to a safe condition are part of launch and could possibly extend the end of launch. In the rare, yet to be seen, situation of a suborbital launch that does not require an FAA launch license but does require a reentry license, launch ends after the vehicle reaches apogee. In addition, the FAA would move the provisions related to reentry readiness and returning the vehicle to a safe state on the ground to proposed Sec. 450.3. Including these reentry provisions in the scope of a vehicle operator license would clarify an operator's responsibilities regarding post- flight ground operations related to returning the vehicle to a safe state on the ground. Finally, the FAA proposes to modify the definition for reentry. Title 51 U.S.C. 50902 defines reentry as: to return or attempt to return, purposefully, a reentry vehicle and its payload or human beings, if any, from Earth orbit or from outer space to Earth. In 2000, the FAA codified the current regulatory definition of reentry in the final rule, Commercial Space Transportation Reusable Launch Vehicle and Reentry Licensing Regulations. Section 401.5 defines ``reenter; reentry'' as: To return or attempt to return, purposefully, a reentry vehicle and its payload, if any, from Earth orbit or from outer space to Earth. The term ``reenter; reentry'' includes activities conducted in Earth orbit or outer space to determine reentry readiness, and that are critical to ensuring public health and safety and the safety of property during reentry flight. The term ``reenter; reentry'' also includes activities conducted on the ground after vehicle landing on Earth to ensure the reentry vehicle does not pose a threat to public health and safety or the safety of property. As noted earlier, the FAA proposes to revise the definition to mirror the statute and move the provisions related to reentry readiness and returning the vehicle to a safe state on the ground to proposed Sec. 450.3.

B. Ground Safety Requirements

This proposal would revise current ground safety requirements to make them more flexible, scalable, and adaptable to varying types of launch and reentry operations. The proposal seeks to ensure that the FAA's oversight of ground operations at U.S. launch sites would only cover activities that are hazardous to the public and critical assets. Specifically, as proposed in Sec. 450.179, an operator would be required to protect the public from adverse effects of hazardous operations and systems associated with preparing a launch vehicle for flight, returning a launch or reentry vehicle to a safe condition after landing, or after an aborted launch attempt, and returning a site to a safe condition. An operator would be required to conduct a ground hazard analysis (proposed Sec. 450.185) and comply with certain prescribed hazard controls during those preflight activities that constitute launch. In addition, an operator would be required to comply with other ground safety and related application requirements in proposed part 450. The FAA proposed the part 417 ground safety regulations in the 2000 NPRM \163\ and codified it in the 2006 final rule. The 2006 final rule adopted ground safety standards governing the preparation of a launch vehicle for flight. The final rule specified that in order for a launch operator to meet part 417 ground safety requirements, an operator must conduct a ground hazard analysis to meet the requirements of subpart E, part 417, as well as a toxic release hazard analysis to meet the requirements of Sec. 417.227. For launches conducted from a Federal launch range, a launch operator could rely on an LSSA as an alternative means of demonstrating compliance with the FAA's part 417 ground safety rules. Because most licensed ground operations were covered by the LSSA approach, the FAA did not begin to exercise the ground safety requirements in part 417 until 2016. ---------------------------------------------------------------------------

\163\ Licensing and Safety requirements for Launch, NPRM. 65 FR 63922 (October 25, 2000). ---------------------------------------------------------------------------

Beginning in 2016, the FAA received several applications for launch licenses from non-Federal launch sites.\164\ Applicants were required to demonstrate compliance with the ground safety regulations in part 417. During the FAA's evaluation, the agency found that many of its ground safety requirements were overly burdensome, highly prescriptive, and did not include criteria for determining public safety. Furthermore, the FAA discovered the requirements were out-of-date with commercial space transportation practices and operations, and in some cases duplicated other state and Federal regulations. ---------------------------------------------------------------------------

\164\ The FAA's first license application involving a launch from a non-Federal launch range was from SpaceX for operations at pad 39A in Cape Canaveral, Florida. The FAA completed its evaluation and issued SpaceX the license on February 2017. Astra Space originally applied for a launch license from a non-Federal launch range in June 2017, and the FAA issued its license March 2018. ---------------------------------------------------------------------------

Part 431 does not include explicit ground safety requirements. However, the scope of a launch license under part 431 includes preparing a launch vehicle for flight at a launch site in the United States. In conducting its safety review under Sec. 431.31, the FAA must determine whether an applicant is capable of launching an RLV and payload, if any, from a designated launch site without jeopardizing public health and safety and the safety of property. The FAA evaluates on an individual basis all public safety aspects of a proposed RLV mission to ensure they are sufficient to support safe conduct of the mission, including ground safety. In licenses issued under part 431, the FAA has required operators to address reasonably

[[Page 15361]]

foreseeable hazards to ensure the safety of pre- and post-flight ground operations. The lack of clarity in part 431 is problematic, and would be fixed by the ground safety requirements in this proposal. The ARC recommended that the FAA create ground safety regulations that are flexible and streamlined, continue to protect the public, and are not duplicative of other state or Federal authorities. The ARC provided four primary recommendations for ground safety. First, the ARC recommended the FAA allow operators to determine what activities and operations would be covered under FAA regulations by performing an analysis to define hazards. Second, the ARC recommended the FAA scale the scope of what is considered licensed activities based on each operator's unique operations. Third, the ARC recommended the FAA focus its regulatory authority solely on those things that affect public safety. Finally, the ARC recommended the FAA only regulate those things that are not already overseen by other governmental authorities. The FAA agrees with the ARC's recommendations that ground safety regulations should be flexible, performance-based, and utilize a ground hazard analysis that determines the best methods for protecting the public. The proposed ground safety regulations would rely on a system safety approach to allow flexibility by stripping away specific design requirements, establishing more performance-based requirements, and giving the operator flexibility in satisfying these requirements. Specifically, an operator would conduct a ground hazard analysis (proposed Sec. 450.185), and comply with prescribed hazard controls. In addition to any mitigations identified in the ground hazard analysis, the proposed regulations would require several prescribed hazard controls, including an accounting of how the operator would protect members of the public who enter areas under their control, provisions on how the operator would mitigate hazards created by a countdown abort, an explanation of the operator's plans for controlling fires, and generic emergency procedures an operator would implement. As will be discussed later, operators using toxic materials would have to perform a toxic release hazard analysis (proposed Sec. 450.187), show how it would contain the effects of a toxic release, or how the public would be protected from those risks from toxic releases. Operators would also be required to develop an explosive siting plan (proposed Sec. 450.183) and to coordinate with licensed launch and reentry site operators (proposed Sec. 450.181). 1. Ground Safety: Identifying First Hazardous Activity In proposed Sec. 450.3, an operator would have the flexibility to determine for its particular operation when the first preflight activity that poses a hazard to the public begins in coordination with the FAA. An operator could identify the arrival of the vehicle or its major components at the launch site as the beginning of hazardous operations, which is consistent with current practice. This option would provide a clear demarcation of when launch begins that is easily understood by both an operator and the FAA. The license would cover all ground operations that may present a hazard to the public from the time flight hardware first arrives at the launch or reentry site to the end of launch or reentry. Alternatively, an operator could identify some other action, after the arrival of the vehicle or its major components at the launch site, as the beginning of hazardous activities. As discussed earlier in the scope of a vehicle operator license discussion, this option would be available for those operations where the arrival of the launch vehicle does not constitute the beginning of hazardous activities. It would also provide flexibility to operators because the start of hazardous launch operations is unique to each operator's circumstances. These hazardous launch operations would include the pressurizing or loading of propellants into the vehicle or launch system,\165\ operations involving a fueled launch vehicle,\166\ or the transfer of energy necessary to initiate flight.\167\ ---------------------------------------------------------------------------

\165\ This would include the loading of propellants or pressurants, where there are potential hazards such as overpressure, explosion, debris, deflagration, fire, and toxic material release. The operations that are typically performed include wet dress rehearsals, cold flow, returning the vehicle to a safe state following a scrub, and tests that might be performed while the vehicle is being fueled. \166\ This would include static fire or tests with a fully- fueled integrated vehicle. \167\ This would include activities that involve placing the launch vehicle into a state that would enable it to achieve suborbital or orbital flight. Even if traditional propellants are not used, the energy needed to escape Earth's gravity is significant and the initiation of the action to launch a vehicle could potentially have significant impact to public safety. ---------------------------------------------------------------------------

While this option offers greater flexibility, it would require that an applicant talk with the FAA during pre-application consultation to identify which activity would be the beginning of hazardous launch operations. This is necessary for the FAA to scope its requirements accordingly, and so that the applicant knows what to include in its application. Early interactions with the FAA would allow a potential applicant to work with the FAA to determine which preflight operations constitute launch and therefore must occur under a license. An applicant that elects to identify an activity after the arrival of a launch vehicle or associated major components at a launch site as the beginning of launch should be prepared to discuss its operations with the FAA so that the FAA can determine that operations occurring prior to that point would not pose a threat to public safety. Note that under this proposal, indemnification and reciprocal waiver of claims coverage would start when launch begins as it does under current regulations. In other words, financial responsibility requirements would apply from the first hazardous operation until launch ends. 2. Ground Safety: Ground Hazard Analysis Proposed Sec. 450.185 (Ground Hazard Analysis) would require an operator to complete a ground hazard analysis which would include a thorough assessment of the launch vehicle, the launch vehicle integrated systems, ground support equipment, and other launch site hardware. The analysis would include an identification of hazards, a risk assessment, an identification and description of mitigations and controls, and provisions for hazard control verification and validation. Although the analysis might incorporate employee safety and mission assurance, this proposal would only require an applicant to identify the hazards that affect the public, and how an operator would mitigate those hazards. Proposed Sec. 450.185(a) would require an operator to identify hazards. A hazard is a real or potential condition that could lead to an unplanned event or series of events resulting in death, serious injury, or damage to or loss of equipment or property. The FAA proposes separating ground hazards into two primary categories: System and operational hazards. System hazards would include, but would not be limited to, vehicle over-pressurization, sudden energy release including ordnance actuation, ionizing and non-ionizing radiation, fire or deflagration, radioactive materials, toxic release, cryogens, electrical discharge, and structural failure. Operational hazards would be hazards introduced to the launch site through procedures and processes that occur during vehicle processing. Operational hazards would include propellant handling and

[[Page 15362]]

loading, transporting vehicles or components, vehicle system activation, and related tests. Once an operator has identified hazards, proposed Sec. 450.185(b) would require an operator to conduct a risk assessment. In other words, an operator would have to evaluate each hazard to determine the likelihood and the severity of that hazard. This assessment should identify the likelihood of each hazard causing a casualty. This assessment should also account for the likelihood of each hazard causing major damage to public property or critical assets. Public property, in this case, means any property not associated with the operation. Critical assets means an asset that is essential to the national interests of the United States, and includes property, facilities, or infrastructure necessary to maintain national defense, or assured access to space for national priority missions. Proposed Sec. 450.185(c) would require an operator to identify mitigations or controls used to eliminate or mitigate the severity or likelihood of identified hazards. An operator would be required to demonstrate, as part of its ground hazard analysis, that the mitigations or controls reduce the likelihood of each hazard that may cause (1) death or serious injury to the public to an extremely remote likelihood, and (2) major damage to public property or critical assets to a remote likelihood. These qualitative thresholds are the same as those in Sec. 437.55(a)(3) and proposed Sec. 450.109(a)(3). A hazard control is a preventative or mitigation measure that reduces the likelihood of the hazard or ameliorates its severity. Proposed Sec. 450.185(d) would require an operator to identify and describe the risk elimination and mitigation measures required to satisfy the risk criteria in proposed Sec. 450.185(c). Under current industry standards, these measures include one or more of the following: Design for minimum risk, incorporate safety devices, provide warning devices, or implement procedures and training, as previously discussed in reference to the analogous flight hazard analysis requirement in Sec. 450.109(a)(4).\168\ ---------------------------------------------------------------------------

\168\ MIL-STD-882E, section 4.3.4. ---------------------------------------------------------------------------

Finally, proposed Sec. 450.185(e) would require an operator to demonstrate through verification and validation that the risk elimination measures meet the remote and extremely remote standards discussed earlier. Verification is an evaluation to determine that safety measures derived from the ground hazard analysis are effective and have been properly implemented. Verification provides measurable evidence that a safety measure reduces risk to acceptable levels. Validation is an evaluation to determine that each safety measure derived from the ground hazard analysis is correct, complete, consistent, unambiguous, verifiable, and technically feasible. Validation ensures that the right safety measure is implemented, and that the safety measure is well understood. While this proposal would require an operator to complete a full ground hazard analysis as described previously, an operator would not need to submit this analysis in its entirety as part of its vehicle operator license application. Rather in proposed Sec. 450.185(f), the FAA would require an applicant to provide a description of the ground safety hazard analysis methodology, a list of the systems and operations involving the vehicle or payload that may cause a hazard to the public, and the results of the ground hazard analysis that affect the public. Although the results of the ground hazard analysis would be unique to each applicant's operations, the ground hazard analysis application deliverables should have common elements. Specifically, the ground hazard analysis should contain the hazards that have a high likelihood or high severity of affecting the public. The analysis should include controls for the hazards that mitigate the risk to the public and all of the other requirements shown in Sec. 450.185. Common hazards that affect public safety, which the FAA would expect to be addressed in a ground hazard analysis, include propellant loading, ordinance installation or actuation, proximity to pressurized systems during operations, certain lifting operations (such as solid rocket motors and payload integration), operations which could result in toxic release, and RF testing. Fundamentally, if the operator identifies a hazard that affects the public, it must be properly documented and mitigated to reduce the risk to the public. It should be noted that any part of the ground hazard analysis could be reviewed during inspection. 3. Ground Safety: Ground Safety Prescribed Hazard Controls In addition to those mitigations an operator would implement as a result of its ground hazard analysis, proposed Sec. 450.189 (Ground Safety Prescribed Hazard Controls) would require an operator to implement certain prescribed hazard controls during the ground operations period of launch or reentry. These prescribed hazard controls would require that an operator document how it would protect members of the public who enter areas under the operator's control, mitigate hazards created by a countdown abort. They would also require the operator's plans for controlling fires and emergency procedures. Specifically, proposed Sec. 450.189(b) would require an operator to document a process for protecting members of the public who enter any area under the operator's control. Although the public would be protected from many hazards because they are excluded from safety clear zones and prevented from entering the site during certain hazardous operations, an operator should account for the protection of the public when they are allowed to be on the site. The proposed rule would require an operator to develop procedures to identify and track members of the public while on site, and methods to protect the public from hazards in accordance with the ground hazard analysis and the toxic hazard analysis. For example, the operator could have plans in place to control who enters its site, whether or not members of the public on site will be escorted, how the public will be made aware of and protected from hazards, and if members of the public will be required to wear personal protective equipment. This rule would also require an operator to establish, maintain, and perform procedures for controlling certain hazards in the event of a countdown abort or recycle operation. Current Sec. 417.415(b) requires an operator to meet specific requirements for safing their vehicle, maintaining control of their FSS, and controlling access to the site until it is returned to a safe state. This rule would require a more performance-based approach to ensuring the safety of the vehicle and the site following a countdown abort or recycle operation in order to accommodate many different types of flight safety systems and operations. Proposed Sec. 450.189(c) would require that an operator, following a countdown abort or recycle operation, establish, maintain, and perform procedures for controlling hazards related to the vehicle and returning the vehicle, stages, or other flight hardware and site facilities to a safe condition. In all of these instances, this proposal would require an operator to have provisions in place to keep the public safe while returning the launch vehicle or launch site back to a safe condition. If a launch vehicle does not lift-off after a command to initiate flight, an operator would be required to ensure that the vehicle and any payload are in a safe configuration, prohibit the public from entering into any identified hazard areas until the site

[[Page 15363]]

is returned to a safe condition, and maintain and verify that any FSS remains operation until certain that the launch vehicle does not represent a risk of inadvertent flight. These more specific requirements would be levied on an operator in the event of a failure to lift-off after a command to initiate because a launch vehicle can be in a particularly hazardous state. This proposed requirement is similar to Sec. 417.415(b), which requires a launch operator to establish procedures for controlling hazards associated with a failed flight attempt where an engine start command was sent, but the launch vehicle did not lift-off. These procedures must include maintaining and verifying that each flight termination system remains operational, assuring that the vehicle is in a safe configuration, and prohibiting launch complex entry until the launch pad area safing procedures are complete. Proposed Sec. 450.189(d) would require an operator to have in place reasonable precautions for reporting and controlling any fire that occurs during launch and reentry activities in order to prevent the occurrence of secondary hazards such as a brush fire caused by a static fire test or some related ground launch activity. These secondary hazards, if not controlled, could reach pressure vessels or other related equipment causing more damage. An operator may choose to meet industry standards or fire codes as a means of satisfying this requirement. Proposed Sec. 450.189(e) would require an operator to establish general emergency procedures that address how emergencies would be handled at the site. An emergency has the potential to directly affect the public or create secondary hazards that may affect the public; therefore, implementation of these procedures are critical for safety of the public. An emergency would include any event that would require an evacuation, or a response from emergency officials such as the fire department or emergency medical technicians. Additionally, the establishment of general emergency procedures would allow the operator to have roles, responsibilities, and plans in place in advance of an emergency to reduce the effects of any emergency on the public. Section 417.111(c)(15) currently requires an operator to have generic emergency procedures in place for any emergency that may create a hazard to the public, and this rule would replace those prescriptive requirements with performance-based requirements. Proposed Sec. 450.189(f) would require an applicant to submit its process for protecting members of the public who enter any area under the operator's control. This process would be submitted as part of an applicant's vehicle operator license application. 4. Ground Safety: Coordination With a Licensed Launch or Reentry Site Operator Under proposed Sec. 450.181(a), for a launch or reentry conducted from or to a Federal launch or reentry site or a site licensed under part 420 or 433, an operator must coordinate with the site operator because the two entities each have public safety responsibilities during ground operations. Specifically, an operator must coordinate with the site operator to ensure public access is controlled where and when necessary to protect public safety, to ensure launch or reentry operations are coordinated with other launch and reentry operators and other affected parties to prevent unsafe interference, to ensure that any ground hazard area does not unnecessarily interfere \169\ with continued operation of the launch or reentry site, and to ensure prompt and effective response in the event of a mishap that could impact public safety. This is similar to Sec. 417.9(b)(2), which requires a launch operator to coordinate with a launch site operator and provide any information on its activities and potential hazards necessary for the launch site operator to determine how to protect any other launch operator, person, or property at the launch site. Part 431 requires an agreement between a launch or reentry operator and any site operator in Sec. 431.75. In addition, in the mission readiness review requirements in Sec. 431.37(a), an operator must involve launch site and reentry site personnel and verify their readiness to provide safety-related launch property and launch services. ---------------------------------------------------------------------------

\169\ The FAA has proposed minimum requirements for ground hazard areas based on safety thresholds, either toxic hazard areas or other hazard areas derived from the ground hazard analysis, but has always allowed operators to propose to clear areas larger than necessary to ensure greater safety. In consultation with NASA and the Department of Defense, the FAA discovered that FAA approved ground hazard areas were having adverse impacts on neighboring space operations in easily avoidable ways. As such, the FAA has proposed ground hazard areas be coordinated with the affected launch or reentry site operators prior to licensing. ---------------------------------------------------------------------------

For a launch or reentry conducted from or to a site licensed under part 420 or 433, Sec. 450.181(b) would require an operator to also coordinate with the site operator to establish roles and responsibilities for reporting, responding to, and investigating any mishap during ground activities at the site. The same mishap plan requirements in proposed Sec. 450.173 would apply to a site operator leaving open the assignment of roles and responsibilities between a site and launch or reentry operator for reporting, responding to, and investigating mishaps during ground operations. Proposed Sec. 450.181(b) is designed to ensure those roles and responsibilities are established. As part of its application, an applicant would be required to describe how it is coordinating with a Federal or licensed launch or reentry site operator in compliance with this section. As discussed earlier, in reference to proposed Sec. 450.147, a vehicle operator would be required to submit as part of its vehicle operator license application references to any agreements with other entities utilized to meet any requirements of this section. In this context, agreements may include security, access control services, any lease agreements for launch sites, services used for hazard controls or analysis, or any agreement with local emergency or government services. 5. Ground Safety: Explosive Site Plan Proposed Sec. 450.183 (Explosive Site Plan) would require an applicant to include an explosive site plan as part of its vehicle operator license application, if it proposes to conduct a launch or reentry from or to a site exclusive to its own use. The explosive site plan would have to demonstrate compliance with the explosive siting requirements of Sec. Sec. 420.63, 420.65, 420.66, 420.67, 420.69, and 420.70. Currently for exclusive use sites, Sec. 417.9(c) requires a launch operator to satisfy the requirements of the public safety requirements of part 420. With proposed Sec. 450.183, the FAA is clarifying that the only requirements from part 420 that need be conducted by an exclusive use operator is the explosive safety requirements. 6. Ground Safety: Toxic Hazards During Ground Operations Proposed Sec. 450.187 contains requirements for toxic hazard mitigation for ground operations. This is discussed later in the ``Additional Technical Justification and Rationale'' section, in the subsection on toxic hazards for flight, due to the commonality of toxic requirements for ground operations and flight.

Process Improvements

A. Safety Element Approval

This proposal would modify part 414 to enable applicants to request a safety

[[Page 15364]]

element approval in conjunction with a license application as provided in proposed part 450. Proposed Sec. 450.39 (Use of Safety Element Approval) would allow an applicant to use any vehicle, safety system, process, service, or personnel for which the FAA has issued a safety element approval under part 414 without the FAA's reevaluation of that safety element during a license application evaluation to the extent its use is within its approved envelope. Finally, this proposal would change the part 414 term from ``safety approval'' to ``safety element approval'' to distinguish it from ``safety approval'' as used in parts 415, 431, and 435, and proposed part 450, because these terms, as discussed later in this section, have entirely different meanings. i. Part 414 and 415 Safety Approval Clarification As defined in current Sec. 414.3, a safety approval is an FAA document containing an FAA determination that one or more safety elements, when used or employed within a defined envelope, parameter, or situation, will not jeopardize public health and safety or safety of property. As listed in the Act, safety elements include: (1) Launch vehicle, reentry vehicle, safety system, process, service, or any identified component thereof; or (2) qualified and trained personnel, performing a process or function related to licensed launch activities or vehicles. In contrast, parts 415, 431, and 435 reference ``safety approval'' to mean an FAA determination that an applicant is capable of launching a launch vehicle and its payload without jeopardizing public health and safety, and safety of property. Other chapter III parts, including parts 431 and 435, reference ``safety approval'' as described in part 415. The use of identical terms in parts 414, 415, 431, and 435 to reference different meanings has caused confusion. Therefore, the FAA proposes to distinguish these terms by changing the part 414 term to ``safety element approval.'' This proposed term more accurately reflects the substance of a part 414 safety approval of a particular element that may be used to support the application review for one or more launch or reentry licenses. Other than the addition of ``element'' to the current term, the part 414 definition and related references in parts 413 and 437 would remain the same. The FAA would make conforming changes throughout parts 413, 414, and 437, where a part 414 safety approval is referenced, to change those references to ``safety element approval.'' The term ``safety approval'' would maintain the same meaning as that in current 415, 431 and 435 where it appears in the proposed rule. ii. Part 414 Safety Element Approval \170\ Application Submitted in Conjunction With a License Application ---------------------------------------------------------------------------

\170\ For readability and ease of understanding, this section refers to a current part 414 safety approval as a safety element approval, regardless of whether the discussion is referencing the current regulations or the proposed regulations. For direct quotations, the FAA retains the previous term ``safety approval.'' ---------------------------------------------------------------------------

Part 414 enables a launch and reentry operator to use an approved safety element within a specified scope without a re-examination of the element's fitness and suitability for a particular launch or reentry proposal. A safety element approval may be issued independent of a license, and it does not confer any authority to conduct activities for which a license is required under chapter III. A safety element approval does not relieve its holder of the duty to comply with all applicable requirements of law or regulation that may apply to the holder's activities. The ARC recommended that an applicant for a launch or reentry license be able to identify one or more safety elements included in the applicant's license application and to request review of those safety elements for a safety element approval concurrent with the license application review.\171\ ---------------------------------------------------------------------------

\171\ ARC Report, p. 24-25. ---------------------------------------------------------------------------

The FAA agrees with the ARC's recommendation. The FAA notes that its practice has always been to accept references to information provided in a previous license application so long as the applicant can demonstrate the relevance of that information to the current application. The FAA also relies on previous evaluations where it analyzed compliance with a particular requirement if the same operator submits a more recent application using the same analysis. The proposed changes would codify this approach for safety element approval applications in proposed Sec. 450.39 \172\ and the relevant sections in part 414. ---------------------------------------------------------------------------

\172\ Proposed Sec. 450.39 is similar to Sec. 437.21(c) for experimental permits, which states that if an applicant proposes to use any reusable suborbital rocket, safety system, process, service, or personnel for which the FAA has issued a safety approval under part 414, the FAA will not reevaluate that safety element to the extent its use is within its approved envelope. Parts 415 and 431 do not have similar sections because they were developed before part 414 was issued. ---------------------------------------------------------------------------

This proposal would allow an applicant to request a safety element approval as part of its vehicle operator license application. Specifically, this rule would provide a process in proposed Sec. 414.13 to apply for a safety element approval concurrently with a license application. These safety element approval applications submitted in conjunction with a license would largely use information contained in a license application to satisfy part 414 requirements. This would alleviate the need to provide separate applications for a vehicle operator license and a safety element approval. The FAA envisions safety element approvals in conjunction with a license application to cover the same safety elements as delineated in Sec. 414.3. Using similar processes as for part 414, the FAA would determine whether a safety element is eligible for a safety element approval. The FAA would base its determination on criteria in proposed part 450. The applicant would be required to specify the sections of the license application that support its application for a safety element approval. The technical criteria for reviewing a safety approval submitted as part of a vehicle operator license application would be limited to the requirements of proposed part 450. This limitation would simplify the safety element approval process by eliminating the need to provide a Statement of Conformance letter, as required under current Sec. 414.1(c)(3) for a safety element approval separate from a vehicle operator license application. To avoid this limitation to proposed part 450 criteria, an applicant could apply for a safety element approval separate from a vehicle operator license. However, there is no difference between a safety element approval issued through a separate application or a vehicle operator license application. Finally, the FAA proposes to remove the requirement stating that, for each grant of a safety element approval, the FAA will publish in the Federal Register a notice of the criteria that were used to evaluate the safety element approval application, and a description of the criteria. The FAA provided the rationale for this notification in the preamble to a proposed rule.\173\ The FAA explained that the purpose of this notification requirement was to make clear the criteria and standards the FAA used to assess a safety element. However, the FAA has found that this requirement is unnecessary, and has potentially discouraged applications for safety element approvals due to concerns that proprietary data may be disclosed. Going forward, a safety element approval application submitted concurrently with a vehicle operator license application would be evaluated

[[Page 15365]]

based only on criteria in proposed part 450. For other safety element approvals, experience has shown that there is no need to publish the criteria because the FAA's determinations were not based on any uniquely-derived standard. In fact, all eight safety element approvals granted by the FAA have been evaluated against regulations in 14 CFR chapter III. Therefore, the FAA proposes to revise the requirement in current Sec. 414.35 (re-designated as Sec. 414.39) such that safety element approval evaluation criteria, whether related to an application submitted concurrently with a license application or separately, would not require publication. ---------------------------------------------------------------------------

\173\ Safety Approvals, NPRM, 70 FR 32191, 32198 (June 1, 2005). ---------------------------------------------------------------------------

Given the FAA's proposal to not require publication of evaluation criteria, the confidentiality provision under current Sec. 414.13(d) \174\ is no longer necessary. That provision notifies applicants that if proposed criteria is secret, proprietary, or confidential, it may not be used as a basis to issue a safety approval. ---------------------------------------------------------------------------

\174\ Current Sec. 414.13 would be renumbered in this proposal as Sec. 414.17 to maintain sequential section numbering. ---------------------------------------------------------------------------

B. Incremental Review of a License Application

In response to the ARC recommendations, the FAA proposes to amend part 413 and to include language in proposed part 450 to allow an applicant the option for an incremental review of the safety approval portion of its application. Under 51 U.S.C. 50905(a)(1), the FAA is required by statute to issue or deny a launch or reentry license not later than 180 days after accepting an application. Under the same statute, the FAA must inform the applicant of any pending issue and action required to resolve the issue not later than 120 days after accepting an application. To ensure that the FAA has sufficient time to complete a thorough review to evaluate whether the applicant complies with the FAA's commercial space transportation regulations in the prescribed time frame, Sec. 413.11 states the FAA screens the application to determine if it contains sufficient information for it to begin its review. It also states that if the application is so incomplete or indefinite that the FAA cannot start to evaluate it, the FAA will notify the applicant accordingly. In accordance with internal policy, the FAA aims to make this complete enough determination within two calendar weeks after receiving the application. When the FAA accepts an application, the 180-day review period begins on the date that the FAA received the application. If the FAA accepts an application as complete enough to review, the FAA works with applicants to identify additional information and documentation needed to demonstrate regulatory compliance, and advises applicants when those materials are needed. If the additional materials are not provided within an appropriate time frame, the FAA tolls the review period, stopping the counting of time towards the 180-day deadline. Once the FAA has completed its review, it issues a license, or informs the applicant, in writing, that the license application is being denied and states the reasons for denial. Industry representatives have expressed frustration both with a lack of clarity as to what is ``complete enough'' for the FAA to accept an application and begin review and with the 180-day review period. The FAA seeks comment on how the FAA can improve the clarity of ``complete enough'' to address past frustrations. For an applicant that is in the early stages of development, there are challenges with compiling all of the documentation in parallel with their vehicle development. First- time applicants regularly underestimate the amount of time needed for licensing. For nearly all applicants, much of the vehicle and mission information is only refined and finalized within the 180-day review period, which may subject the application to tolling and business risk to the applicant's timeline for launch operations. The timing of the issuance of an FAA authorization has never caused a delay to a launch or reentry operation, but the FAA is cognizant that there could be impacts on an operator even absent an operation delay. In part to address these issues, and bearing in mind that a written application is the means by which the FAA determines whether a launch or reentry operator can conduct a launch or reentry safely, the FAA invited the ARC to describe how the FAA might modify its application process to improve efficiency for both the FAA and applicants. The ARC suggested in part that the FAA allow for an incremental or modular application and review process. Specifically, the ARC recommended that the application review process should be modified to allow for incremental approvals of subsections to guide a focused review and avoid tolling. The recommendation suggested further that, rather than 180 days for review of an entire application, the FAA should assign a brief period for each subsection or module. The current application process is already modular to an extent. The FAA has issued payload determinations outside of a license, primarily for payload developers seeking early assurances that their payload would be permitted to be launched. The FAA has even conducted preliminary policy reviews to provide similar assurances to future applicants on a less formal basis. Despite these allowances, the vast majority of FAA commercial space licensing evaluation time is spent on evaluating the safety implications of a license application. Because this proposed rule seeks to convert the prescriptive safety requirements to performance-based criteria, the FAA believes that it may be possible to develop a flexible safety review process that can afford applicants early determinations, providing an applicant more flexibility and control over the timing of the licensing process. The ARC also recommended that the FAA reduce its application review time. The ARC focused on differentiating between experienced and inexperienced operators in order to decrease FAA review time of license applications. While the FAA agrees that experienced operators may require shorter application review times, it should be noted that this would likely be due to familiarity with the application process, more streamlined application materials that lend themselves to a more efficient review, and established processes that have been through FAA review previously (such as ground safety analyses). While the proposed incremental review process would empower operators to better define when certain portions of an application are reviewed and would allow an operator that has satisfied certain requirements early to receive credit for those portions of its application in advance, other proposals in this rulemaking, such as safety element approvals concurrent with a license application, flexible time frames, and reduced application burdens, would probably serve to reduce review times more effectively than an incremental application process. Nevertheless, the modular nature of payload determinations, policy approvals, environmental evaluations, and financial responsibility requirements, and the more granular incremental review of compliance with the safety approval requirements would allow an applicant to seek partial approval of an application as soon as a portion is ready to be evaluated. These approvals would allow an operator to better manage its timeline and any potential timeline risk. The flexible nature of this proposal would allow the FAA to further engage with industry and establish new best practices and greater efficiencies for

[[Page 15366]]

both government evaluators and our commercial partners. The option of using an incremental approach would provide more flexibility to operators who are able to provide portions of their application in advance. In proposed Sec. 450.33 (Incremental Review and Determinations), the FAA would revise the launch and reentry regulations to allow for an incremental review application submission option for vehicle operator license applicants. Because the current regulations already allow an operator to submit the payload, policy, environmental, and financial responsibility portions of its application independently, the FAA proposes that the incremental review process apply specifically to the safety approval portion of a license application. Given the large variety of applicant experience, proposed operations, and company timelines, the FAA recognizes a need for flexibility. Accordingly, the FAA is proposing amendments to part 413 and regulatory language in proposed part 450 to allow for incremental application submission and determinations. This incremental review application process would not replace the traditional review of a full, complete application submitted at once--the incremental review would be an optional path to obtaining an FAA license determination that allows an applicant to choose an application submission process that suits their business model and program needs. The FAA is proposing in Sec. 450.33(a) that, prior to any submission, an applicant would be required to identify to the FAA that it plans to avail itself of the incremental review and determination application process. During pre-application consultation, the FAA would work with an applicant towards an incremental review process that is aligned to both the development process for an applicant and the necessities of the FAA's evaluation framework. The FAA proposes to coordinate with applicants during pre-application consultation to determine the following: (1) Appropriate portions of an operator's application that could be submitted and reviewed independently; (2) the application and review schedule with dates of key milestones; (3) the applicant's planned approach to demonstrate compliance with each applicable regulation, to include any foreseeable requests for waiver; and (4) the scope of the proposed action being applied for, the identification of any novel safety approaches or other potentially complicating factors, and how those will be addressed during the licensing process. The details of an applicant's incremental application process would have to be approved by the FAA in accordance with proposed Sec. 450.33(b) prior to application submission and the FAA could issue determinations towards a safety approval resulting from those reviews, in accordance with proposed Sec. 450.33(c). An applicant would be able to propose sections of the safety approval portion of its application that the FAA could review independently. This process would allow an applicant to submit completed sections, for example the System Safety Program, to the FAA early, rather than wait until the entire application was complete enough. The FAA would also be able, where appropriate, to review and make determinations on these increments prior to a full licensing determination. It would also allow an applicant to identify more challenging or lengthy portions of an application that could be submitted earlier to avoid delays and tolling closer to a launch date. The FAA believes this process would improve predictability for applicants seeking assurances against business risks. As the FAA gains more experience with the incremental application process, the FAA may issue guidance for the process or an example of a process that has been found to satisfy the intent of the regulation. The FAA considered the ARC's recommendations for predetermined modules, but identified several concerns in attempting to model the practice of such a process. The ARC provided a flow diagram that partitioned the evaluation process into nine conceptual 30-day modules, with the proposal that those modules could be reviewed in serial or in parallel. As noted earlier, the FAA is statutorily limited to a 180-day review process, so any review of modules in serial could not exceed 180 days. The ARC recommended that if the modules are submitted in parallel for concurrent review, extra time should be provided for FAA review up to 90 days to allow for dependent analyses. The ARC recommendation asserted the importance that the modules are independent in terms of content, when possible, but correctly acknowledged that some modules will necessarily depend on others.\175\ The FAA seeks to provide as much flexibility as practicable in the proposed process to enable innovative business practices and schedules that contemplate frequent launches and reentries, but many aspects of the safety evaluation are interdependent, and the FAA requires certain material from one aspect of a safety evaluation to inform and remain consistent with other aspects. Furthermore, operators generally develop and define standards, methodologies, processes, preliminary designs, and plans for an aspect of their evaluation long before they are able to submit advanced analysis products or testing results. The FAA seeks comment on how a formal incremental review process would account for the statutory 180- day review period, when application increments or modules are likely to be submitted and reviewed at very different time periods. ---------------------------------------------------------------------------

\175\ ARC Report, p. 61. ---------------------------------------------------------------------------

To enable incremental application submission and review, the FAA is proposing to amend Sec. 413.1 to broaden the term application to encompass either a full application submitted for review or an application portion submitted under the incremental review process. In making this amendment, the FAA would be able to accommodate applications submitted under either process. The FAA proposes to retain the pre-application consultation requirement of Sec. 413.5, which is streamlined by the proposed removal of Sec. 415.105 and its duplicative requirement for a more prescriptive pre-application consultation process. Under this proposal, an operator would be required to identify whether it wants to enter into the incremental application process during pre-application consultation. Should an operator elect to submit its application incrementally, it would work with the FAA to detail what is needed for each application portion to begin review. In proposing an approach to incremental review, the FAA expects that an applicant would consider the following: 1. Application increments submitted at different times should be not be dependent on other increments to the extent practicable. 2. Application increments should be submitted in a workable chronological order. In other words, an applicant should not submit an application increment before a separate application increment on which it is dependent. For example, the FAA would not expect to agree to review a risk analysis before reviewing a debris analysis or probability of failure analysis because the risk analysis is directly dependent on the other two analyses. 3. An applicant should be able to clearly identify all the regulations and associated application materials that would be required for each application increment, and should be able to demonstrate to the FAA that all the applicable regulations are covered by the separately submitted portions.

[[Page 15367]]

4. Examples of application increments that may be suitable for incremental review include: System Safety Program, Preliminary Safety Assessment for Flight, Flight Safety Analysis Methods, and FSS Design. The FAA seeks comment on the incremental approach generally. The FAA further seeks comment on any other useful guidelines that an applicant should consider when crafting an incremental approach. Finally, the FAA also seeks comment on any other safety approval sections of a license application that would be appropriate for incremental review. Finally, the FAA would amend Sec. 413.15 to provide that the time frame for any incremental review and determinations would be established with an applicant on a case-by-case basis during pre- application consultation. The FAA would continue to work with applicants during the pre-application phase to assist applicants in navigating the FAA's regulations and identifying potential challenges.

C. Time Frames

Chapter III regulations include a number of prescriptive time frame requirements that the FAA proposes to make more flexible. In 2016, the FAA conducted a review of the time frames in chapter III and found that many could be made more flexible without any discernable impact on safety. During meetings with the Commercial Spaceflight Federation (CSF) \176\ in 2017 and 2018, some members of industry expressed concern about the FAA's restrictive time frame requirements. The ARC also stated that the current regulatory time frames and requirements for submission of changes is onerous and untenable for high flight rates.\177\ ---------------------------------------------------------------------------

\176\ The Commercial Spaceflight Federation (CSF) states that its mission is ``to promote the development of commercial human spaceflight, pursue ever-higher levels of safety, and share best practices and expertise throughout the industry.'' Its member businesses and organizations include commercial spaceflight developers, operators, spaceports, suppliers and service providers. \177\ ARC Report, p. 48. ---------------------------------------------------------------------------

In consideration of the industry's comments and the FAA's review of chapter III time frames, the FAA proposes in Sec. 450.15 to increase flexibility by allowing an operator the option to propose alternative time frames that better suit its operations. The FAA would revise the time frame requirements in parts 404, 413, 414, 415, 417, 420, 431, 437, and 440 that are overly burdensome and may result in waiver requests. Further, the FAA would, after reviewing the operator's request for an alternative time frame, provide the FAA's expected review period to make its determination on the proposed alternative time frame. The proposed revisions to parts 415, 417, and 431 would be included in new proposed part 450. For ease of reference, the FAA would list all revised chapter III time frames in proposed appendix A to part 404. Proposed Sec. 450.15(b) would inform the operator to submit its request for an alternative time frame in writing. The ``in writing'' provision could be in the form of a formal letter or email sent electronically to the email address [email protected], with the subject line ``Alternative Time Frame Request.'' If an operator would like to send the request in hardcopy, it would mail the request to the Federal Aviation Administration, Associate Administrator for Commercial Space Transportation, Room 331, 800 Independence Avenue SW, Washington, DC 20591; Attention: Alternative Time Frame Request. The FAA anticipates that an operator would submit these requests during the pre-application consultation or during the application process, and not after a license has been issued. At a minimum, the operator would be required to submit its request before the time frame specified in the regulations. Note, the FAA would need time to process the request. For example, if a requirement states that an operator must submit a document 30 days before launch, the operator may not submit a request for an alternative time frame 30 days before launch or later. Also, under the proposal, the requested alternate time frame must be specific. For example, an operator could request to submit a document 15 days before launch, but not ``as soon as possible.'' The FAA would provide the operator its decision in writing. Proposed Sec. 404.15(c) would provide the conditions under which the Administrator would agree to an alternative time frame. That is, the FAA would review and agree to an alternative time frame if the proposed alternative time frame would allow time for the FAA to conduct its review and make the requisite findings. For example, the default time frame in proposed Sec. 450.213(b) for a licensee to submit to the FAA certain payload information would be not less than 60 days before each mission conducted under a license. The FAA uses the information to verify that each payload fits within any approved class of payload under the license, and to address any issues that may arise. The FAA may only need a shorter time frame for this effort if the approved payload classes are well defined and unlikely to generate payload- specific issues. As another example, the default time frame in proposed Sec. 450.213(d) for a licensee to submit to the FAA certain flight safety system test data would be no later than 30 days before flight. The FAA may agree to a shorter time frame for an experienced operator that uses a proven flight safety system.

D. Continuing Accuracy of License Application and Modification of License

The FAA proposes to consolidate continuing accuracy requirements currently in Sec. Sec. 417.11 and 431.73 in proposed Sec. 450.211. The proposed rule would preserve the standards in Sec. Sec. 417.11 and 431.73. In addition, it would allow an applicant to request approval of an alternate method for requesting license modifications during the application process. This option currently only exists in Sec. 437.85 for experimental permits. Under the current regulations, an operator must ensure that any representation contained in a license application is accurate for the entire term of a license. After the FAA issues a launch license, an operator must apply to the FAA for a license modification if any representation that is material to public health and safety or safety of property is no longer accurate (commonly referred to as ``material change''). An application to modify a license must be prepared and submitted in accordance with part 413. The licensee must indicate what parts of its license application or license terms and conditions would be affected by a proposed modification. Although license applications are often updated during the application process, the application, as fixed at the time of license issuance, becomes part of the licensing record. After issuing the license, the FAA deems any material change to a representation in the application to be a modification to the license. However, changes may occur after a license is issued, particularly among operators that are developing new systems or incorporating innovative technology. The FAA does not wish for the material change requirement to deter those changes intended to improve operations. Although the FAA and operators may not always agree on what constitutes a material change, the FAA works with the operator to resolve any issues and reduce uncertainties. Regarding compliance with an issued license, the ARC recommended that information needed prior to each launch, as long as it is within the approved flight envelope, should be minimized and a centralized, automated

[[Page 15368]]

system for submitting preflight information should be established. Continuing accuracy reviews should be limited to an assessment of the risks created by the change. The ARC further recommended that if the regulations continued to use the term ``material change,'' then that term should be defined in the regulations, guidance, or pre-application agreement. The FAA agrees with the ARC's recommendations. While there already exist avenues by which a licensee can minimize the need for license modifications,\178\ this rule would adopt an approach from Sec. 437.85 where the FAA may identify the types of changes that a permittee may make to a reusable suborbital rocket design without invalidating the permit. In proposed Sec. 450.211, the FAA may approve an alternate method for requesting license modifications if requested during the application process. The FAA envisions that this approach would permit an applicant during the application process to propose a method that is responsive to its anticipated types of changes after a license is issued. ---------------------------------------------------------------------------

\178\ A license applicant may circumvent or lessen the need for frequent license modification due to material change by providing in its application a range of payloads, flight trajectories, hazard areas, and orbital destinations, so as to encompass more flexibility in actual licensed operations. A license applicant may also create acceptable processes for making changes to safety critical systems and their components, mission rules, hazard areas, and safety organization, that limit the need for license modifications. Part of these processes would include a mechanism for informing FAA of the change. ---------------------------------------------------------------------------

Regarding the recommendation for the development of a centralized automated system for submitting preflight information, while the FAA has been flexible in accepting application material and license updates submitted in electronic format, it recognizes that an improved system is desirable. The FAA is exploring mechanisms to facilitate these submissions. Finally, the FAA agrees with the ARC recommendation that it should develop guidance on what constitutes a ``material change'' and has identified the following areas that often constitute a material change: 1. Safety-critical system or component changes (e.g., flight safety system) that may affect public safety, including-- a. Substitution of an existing safety-critical component with a component with a new part number or manufacturer (reflecting changed dimensions, changed functional or performance specifications, or changed manufacturing process). b. Modifications to a safety critical component deemed necessary by an anomaly investigation, and requiring re-verification by test or inspection. c. Rework or repair of a safety-critical component after inspections or tests revealed fabrication or assembly imperfections. d. Reuse, after an earlier launch or reentry, of safety-critical systems or components, requiring refurbishment, re-qualification testing, and re-acceptance testing. 2. Hazard analysis changes that may affect public safety such as the validity of the hazard analysis, mitigation measure, or verification of a safety critical system or component. 3. Flight safety rule changes that may affect public safety such as flight commit criteria associated with public safety. 4. Hazard area changes that may affect public safety, including the dimensions of the area. 5. Maximum Probable Loss (MPL) related changes that affect the validity of the assumptions used to establish the MPL (e.g., change in the number of personnel within a hazard area, change in trajectory resulting in more overflight of people or property, increase in vehicle size with more propellant, hazardous materials, or potential debris). 6. Environmental Assessment related changes that affect the validity of an environmental assessment (e.g., changes to mitigation measures outlined in a record of decision or environmental impact statement). 7. Safety organization changes that may affect public safety such as changes to the roles and responsibilities of the safety organization or personnel, including changes in contractual safety services.\179\ ---------------------------------------------------------------------------

\179\ As discussed earlier in the preamble, the proposed rule would eliminate the current requirement to name a specific individual as the safety official. Instead, the NPRM would allow for one person or several persons to perform the safety official functions, and, the operator would be required to designate a position, not a specific individual, to accomplish the safety official functions. Therefore, under this proposal, if the operator changes the specific individual performing the safety official functions, that would not constitute a material change. ---------------------------------------------------------------------------

8. Critical documents or processes that may affect public safety. The FAA believes that this list provides guidance to help operators better understand what constitutes a material change. As the industry continues to develop and the FAA identifies material changes, it will consider providing more detailed guidance.

Other Changes

A. Pre-Application Consultation

As discussed earlier, the ARC recommended that the FAA require the pre-application process only for new operators or new vehicle programs. For all other operations, the ARC recommended that pre-application occur at the operator's discretion.\180\ The FAA does not agree that pre-application should be discretionary for anyone. In light of the various flexibilities proposed in this rule, pre-application consultation would remain critical to assist operators with the licensing process, especially those that choose to avail themselves of the flexibilities provided in this proposal. These flexibilities include incremental review, timelines, and the performance-based nature of many of the regulatory requirements. Pre-application consultation eases the burden on both the applicant and the FAA during the application process by identifying and resolving issues that allow applicants to submit application materials the agency can accept as complete enough for review. That being said, pre-application consultation with an experienced operator conducting an operation substantively similar to one previously licensed would likely be an abbreviated process. ---------------------------------------------------------------------------

\180\ ARC Report, p. 23. ---------------------------------------------------------------------------

In response to the ARCs request for defined review times, the FAA considered an approach to pre-application consultation that would culminate in a mutually agreeable ``compliance plan.'' Under this approach, a compliance plan would be developed collaboratively between the applicant and the FAA. Key milestones that could be established by the compliance plan would include, but would not be limited to, the planned dates of the formal application submittal, the FAA's licensing determination, and the submission of any required information that is unavailable at the time of formal application submittal. The FAA chose not to propose this requirement because it could be overly burdensome, possibly delay an application submittal, and the compliance plan could require frequent updates. However, the FAA would be open to commenters' views on how to best develop a voluntary pre-application product, such as a compliance plan.

B. Policy Review and Approval

The FAA currently reviews a launch and reentry license application to determine whether it presents any issues affecting national security

[[Page 15369]]

interests, foreign policy interests, or international obligations of the United States. As part of its review and in accordance with section 50918 of the Act, the FAA consults with the Department of State, Department of Defense, and other executive agencies, as appropriate. The Department of Defense assesses the effect of the launch on U.S. national security, and the Department of State assesses its effect on foreign policy interests and international obligations of the United States. For good practice, the FAA also consults with NASA, the Department of Commerce's National Oceanic and Atmospheric Administration (NOAA), and the Federal Communications Commission (FCC), for counsel on those U.S. interests related to the primary responsibilities of each agency. As such, the FAA coordinates with the FCC and NOAA over matters related to frequency licensing and Earth imaging, respectively, and with NASA for matters particularly related to its assets in space. Section 415.25 currently contains application requirements for a policy review of the launch of a vehicle other than an RLV, Sec. 431.25 for the launch and reentry of an RLV, and Sec. 435.23 for the launch of a reentry vehicle other than an RLV.\181\ To date, these informational requirements have served their purpose well. However, the FAA believes that the current informational requirements should be modified to relieve the applicant of unnecessary burden and to improve the utility of the information requested for a policy review. Currently, Sec. Sec. 415.25(b) and 431.25(b) both require an applicant to identify structural, pneumatic, propellant, propulsion, electrical and avionics systems. Section 431.25(b) also requires an applicant to identify thermal and guidance systems used in the launch vehicle, and all propellants. Although identifying the aforementioned systems is important for a safety review, the FAA believes that this information is not critical for a policy review, which addresses whether the launch or reentry presents issues affecting national security interests, foreign policy interests, or international obligations of the United States. ---------------------------------------------------------------------------

\181\ These sections require an applicant to provide basic information about the launch or reentry vehicle, its ownership, launch site, flight azimuths, trajectories, associated ground tracks and instantaneous impact points, sequence of planned events or maneuvers during flight, range of nominal impact areas for all spent motors and other discarded mission hardware, and for each orbital mission, the range of intermediate and final orbits of each vehicle upper stage, and their estimated orbital lifetimes. ---------------------------------------------------------------------------

The FAA proposes to consolidate the policy review requirements contained in Sec. Sec. 415.25 and 431.25 under proposed Sec. 450.41 (Policy Review and Approval). In doing so, the FAA would retain the substance of the current requirements while further tailoring the informational requirements toward a policy review. Also, the FAA would replace the launch or reentry vehicle description requirements with vehicle description requirements that are more appropriate for a policy review. Finally, the FAA would require the applicant to provide flight azimuths, trajectories, and associated ground tracks and instantaneous impact points, and contingency abort \182\ profiles, if any, for the duration of the licensed activity. ---------------------------------------------------------------------------

\182\ The FAA proposes to revise the definition in Sec. 401.5 of ``contingency abort'' to mean a flight abort with a landing at a planned location that has been designated in advance of vehicle flight. The proposed definition is discussed later in this preamble. ---------------------------------------------------------------------------

Specifically, proposed Sec. 450.41(e)(2) would replace the current requirement to identify structural, pneumatic, propulsion, electrical, thermal, guidance and avionics systems with a requirement to describe the launch or reentry vehicle and any stages, including their dimensions, type and amounts of all propellants, and maximum thrust. As previously mentioned, currently required information is not critical for a policy review because policy determinations do not require the same level of technical detail as a safety review and do not need to delve into vehicle design specifics. Instead, the information required by proposed Sec. 450.41(e)(2) would provide the FAA and its interagency partners with the scope of the proposed activity that is more pertinent to a policy review. Moreover, the FAA anticipates that the proposed changes would be significantly less burdensome for an applicant, as the information is readily available and requires minimal effort to provide. In contrast, the currently required information, while also readily available, might be extensive and require more effort to compile. Additionally, it is unclear that the requirements to supply flight azimuths, trajectories, and associated ground tracks and instantaneous impact points, currently found in Sec. Sec. 415.25(d)(2) and 431.25(d)(2), apply for the duration of the licensed activity (i.e., from lift-off to the end of licensed activities). For example, applicants previously have interpreted the requirement to supply flight azimuths and trajectories to end at orbital insertion because that is when ground tracks and instantaneous impact points vanish. However, during interagency coordination for policy reviews of orbital missions, NASA and the Department of Defense have repeatedly, and specifically, requested information from the FAA concerning the trajectories of upper stages after orbital insertion in order to determine the potential for the proposed mission to jeopardize the safety of government property in outer space or national security. Therefore, in addition to consolidating Sec. Sec. 415.25(d)(2) and 431.25(d)(2) into proposed Sec. 450.41(e)(4)(ii), the FAA would add language to clarify that the requirement to supply flight azimuths, trajectories, and associated ground tracks and instantaneous impact points applies for the duration of the licensed activity (i.e., lift off to the end of launch). This clarification would eliminate the need for the FAA to request additional information from an applicant to satisfy inquiries from NASA and the Department of Defense during policy reviews and prevent any unnecessary delays to the policy review process.

C. Payload Review and Determination

The FAA proposes to consolidate the payload review requirements. The agency would also remove the requirement to identify the method of securing the payload on an RLV, add application requirements to assist the interagency review, such as the identification of approximate transit time to final orbit and any encryption, clarify the FAA's relationship with other federal agencies for payload reviews, and modify the 60-day notification requirement currently found in Sec. Sec. 415.55 and 431.53. While speaking of payload reviews, it is important to keep in mind the definitions of launch vehicle and payload as defined in FAA regulations. The FAA is not proposing to amend these definitions. A launch vehicle is a vehicle built to operate in, or place a payload in, outer space or a suborbital rocket. A payload is an object that a person undertakes to place in outer space by means of a launch vehicle, including components of the vehicle specifically designed or adapted for that object. Thus, a payload can become a reentry vehicle. For example, the Dragon is a payload when it is launched on the Falcon 9 and a reentry vehicle when it reenters from Earth orbit. The FAA believes that any component attached to, or part of, a launch or reentry vehicle that has an intended use in space other than transporting itself or a payload, is in fact a payload. For example, the FAA has treated canisters of cremains attached to a stage left in orbit as payloads.

[[Page 15370]]

Pursuant to Sec. 415.51, unless the payload is exempt from review under Sec. 415.53, the FAA reviews a payload proposed for launch to determine whether an applicant, payload owner, or operator has obtained all the required licenses, authorization, and permits. The FAA further determines whether a payload's launch would jeopardize public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States. Similarly, both Sec. 431.51 for launch and reentry of an RLV and Sec. 435.41 for reentry of a reentry vehicle other than an RLV, require the FAA to review a payload to examine the policy and safety issues related to the proposed reentry of a payload. Current Sec. Sec. 415.59 and 431.57 also require the applicant to submit basic payload information to allow the FAA to conduct a payload review. While the information requirements for payload review in Sec. Sec. 415.59 and 431.57 are similar, they are not identical. Both sections require that an applicant provide the payload's physical dimensions and weight; owner and operator; orbital parameters for parking, transfer, and final orbits; and hazardous materials, as defined in Sec. 401.5, and radioactive materials, and the amounts of each. However, Sec. 415.59 requires an applicant to provide the name and class of the payload, the intended payload operations during the life of the payload, and the delivery point in flight at which the payload will no longer be under the licensee's control. Whereas, Sec. 431.57 requires an applicant to provide either the payload name or payload class and function; the physical characteristics of the payload in addition to the payload's dimensions and weight; the explosive potential of payload materials, alone and in combination with other materials found on the payload or RLV during reentry; and the method of securing the payload on the reusable launch vehicle. It also replaces delivery point with designated reentry site(s); and requires the identification of intended payload operations during the life of the payload. With respect to hazardous materials, Sec. 431.57 also requires the applicant to identify the container of the hazardous materials, in addition to the type and amount, because how the hazardous materials are contained is important for reentry. The FAA believes that the current payload review informational requirements necessitate modification to improve the utility and efficiency of payload review. During interagency review, other agencies have requested information from the FAA for the amount of time a payload will take to reach its final orbital destination. This information allows the agencies to assess the payload's potential to impact their operations. However, current regulations do not contain an informational requirement that the applicant provide this information. As a result, the FAA often must make additional requests to the applicant in order to provide the requesting agencies with the information. In the past, most non-government payloads were telecommunications or remote sensing satellites for which there were well-established regulatory regimes. Operators are now proposing payloads with new intended uses such as servicing other satellites and mapping frequency use. The capabilities of payloads continue to grow; for example, cubesats are appearing in great numbers with unique capabilities. As a result, it is possible that these new uses may pose threats to national security, such as the resolution of on-board cameras that might be used to survey national security space assets. Consequently, payload reviews increasingly need to address the threat that these new uses and capabilities might pose to U.S. national security, either unintentional or malicious. Additionally, Sec. 415.53 provides that the FAA does not review payloads regulated by the FCC or the Department of Commerce. Section 431.51 provides that the FAA does not review payloads subject to regulation by other federal agencies. However, neither of these regulations reflect current practice. In practice, the FAA includes payload information in its interagency reviews for all payloads, with the exception of certain U.S. Government payloads for which information is unavailable due to national security concerns, because Sec. 415.51 provides that the safety requirements apply to all payloads, regardless of whether the payload is otherwise exempt. Even though the FAA conducts a review of all payloads, the FAA does not impinge on the authority of the FCC or the Department of Commerce, nor question the decision of the FCC or NOAA to approve communications or remote sensing satellites. It does not question the decision of another federal agency concerning its payloads. More accurately, while the FAA may conduct a review of all payloads, the FAA does not make a payload determination on what it considers an ``exempt'' payload. Changes in the types of payloads that are being launched or proposed have also complicated the scope of FAA payload reviews and demonstrated that the language exempting certain payloads from review is overly restrictive. The FAA has made payload determinations for payloads that will undoubtedly require FCC or NOAA licensing, but the proposed payload missions were beyond the scope of communications or remote sensing. These payloads were examined in the interagency process and neither the FCC nor NOAA took exception to the FAA's approach. Section 50918 of Title 51 of the U.S. Code mandates that the Secretary of Transportation consult with the Secretary of Defense on matters affecting national security, the Secretary of State on matters affecting foreign policy, and the heads of other agencies when appropriate. Section 50919(b) states that chapter 509 of Title 51 does not affect the authority of the FCC or Department of Commerce. The language of FAA regulations exempting from review those payloads subject to the jurisdiction of the FCC, NOAA, and other agencies, is more restrictive regarding the FAA's authority than what is required in the statutory mandate of 51 U.S.C. 50918 and 50919. The genesis of this more-limited role by the FAA came from the Report of House of Representatives, May 31, 1984, that accompanied H.R. 3942. Specifically, the report stated: ``[t]he Committee intends that the Secretary not review or otherwise evaluate the merits of communications satellites licensed and approved by the FCC, other than to assure the proper integration of such payload with the launch vehicle and its launch into orbit.'' At that time, almost all non-government payloads were communications or remote sensing satellites, regulated by the FCC and NOAA, respectively. When DOT published the initial licensing regulations in 1988, the preamble noted that the payloads subject to existing payload regulation included only telecommunications satellites licensed by the FCC and remote sensing satellites licensed by NOAA. It went on to state that payloads that were not subject to review by DOT included all domestic payloads not presently regulated by the FCC or NOAA and all foreign payloads. Almost any domestic payload, even if it is not a telecommunications satellite, however, requires FCC licensing because it will invariably have a U.S.-owned or -operated transmitter for telemetry purposes. Therefore, it appears that the intention of the rule was only to exclude from FAA regulation telecommunications satellites licensed by the FCC and likewise, remote sensing satellites licensed by

[[Page 15371]]

NOAA, and not any satellite with a transmitter licensed by the FCC or with some incidental remote sensing capability. In recent years, there have been proposals for commercial payloads where the primary purpose might be scientific or exploratory or even artistic. Despite their primary purpose, these payloads almost always require an FCC license because they have transmitters for telemetry. Similarly, some payloads also require approval by NOAA even though remote sensing may be ancillary to the main purpose. Without an interagency review, the FAA has no direct means of knowing whether a payload is exempt from review and, as a result, has initiated interagency reviews. These reviews also serve the purpose of alerting the other agencies to launches of payloads that might jeopardize U.S. national security or foreign policy interests, or international obligations of the United States, even if they are exempt from an FAA payload review. Although the FAA has not to date been faced with the Department of Defense or the Department of State raising concerns through the interagency review regarding national security or foreign policy for an ``exempt'' payload, the FAA believes that it would be its responsibility to convey those concerns to the appropriate agencies for resolution. The ARC asserts that the payload reviews being conducted are more detailed than necessary to assure the protection of ``public health and safety.'' The ARC recommended that payloads that stay within the vehicle, have non-hazardous materials, or those that have previously been approved for flight, should not require reviews. It recommended that safety goals can be met by only requiring reviews for hazardous payloads that could impact ``public health and safety.'' The ARC also stated that it would be more cost effective to regulate only hazardous payloads ejected from the launch vehicle in reportable quantities using the existing standards in 49 CFR 172.101. It believes such an approach would reduce unnecessary paperwork and subsequent FAA review for ``benign payloads,'' and the reduction of burden on the FAA to review ``non-safety related payloads'' would support industry's increased flight tempo and reduce FAA review times. The FAA does not agree with the ARC recommendation that payloads that stay within the vehicle, payloads that are non-hazardous materials, or those that have previously been approved for flight should not require reviews. The fact that a payload remains on or within the launch or reentry vehicle does not change the function of the payload. The payload's intended use in space or changes in the orbit of the vehicle to accommodate the payload operation might present issues because it could affect NASA or Department of Defense assets either due to its orbit or function. For example, the Department of Defense has concerns regarding payloads that may pass close enough to its assets to photograph them. The FAA recognizes that some payloads, such as canisters of cremains, attached to an upper stage, might have little or no safety or policy implications. However, a review is still necessary to make that determination. Obviously, the absence of hazardous materials also removes some safety concerns; however, as previously discussed, hazardous materials are not the only concern addressed in the payload review. While payloads that stay within a vehicle, do not contain hazardous materials, or have previously been approved may require less scrutiny, a payload review is still required because the FAA is statutorily mandated under 51 U.S.C. 50904(c) to determine whether a license applicant or payload owner or operator has obtained all required licenses, authorization, and permits. If no license or authorization or permit is required by another federal agency, the FAA must determine whether a launch would jeopardize public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States. Similarly, while potentially it might be more cost effective to regulate only hazardous payloads ejected from a launch vehicle in reportable quantities using existing standards in 49 CFR 172.101, the FAA must still comply with the statutory requirements imposed on it by 51 U.S.C. 50904(c). Both the FAA's current and proposed regulations reflect this statutory requirement. As for payloads that have previously been approved for launch, the FAA already authorizes classes of payloads under Sec. Sec. 431.53 and 415.55, but it still requires identification of the specific payload at least 60 days prior to the launch in order to confirm that the payload fits within the authorized class and to coordinate with other federal agencies. The FAA currently does not make a new payload determination if a payload fits within a class of payloads authorized under a particular license, but the review is still necessary to confirm there are no issues that affect public health and safety, the safety of property, or national security. The more defined the payload class, the less the likelihood of any issues once the specific payload is identified. For series of virtually identical payloads, the FAA has authorized the entire series. A payload or launch operator can work with the FAA to facilitate and expedite payload approvals by defining payload classes to accommodate possible payloads. Also, payload classes authorized for one operator will usually be authorized for another operator. The FAA acknowledges that the current 60-day notification requirement might be unnecessary for certain well-defined payload classes and proposes to modify this requirement to permit a shorter notification on a case-by-case basis. The FAA anticipates that the notification requirement would be specified either in the separate payload determination or in a vehicle operator license. The ARC recommended that payloads that contain hazardous materials in Federally-reportable quantities be reviewed in 15 days. The FAA does not agree with the ARC's recommendation because there are other considerations regarding intended operations in space that might affect national security or the safety of property. For example, a payload may have the capability of observing or interfering with U.S. national security assets or violate a provision of a treaty. The FAA proposes to consolidate the requirements for a payload review currently contained in subparts D of parts 415, 431, and 435 in proposed Sec. 450.43 (Payload Review and Determination). The proposed consolidation would retain most of the current payload review requirements. The limited changes the FAA proposes to the payload requirements are discussed in this section. The FAA proposes to modify the relationship with other agencies by removing the misleading statement that the FAA does not review payloads that are subject to regulation by the FCC or the Department of Commerce. Specifically, the FAA proposes to modify the regulation to reflect that while it does not review those aspects of payloads that are subject to regulation by the FCC or the Department of Commerce, it still reviews the payloads to determine their effect on the safety of launch. The FAA also consults with other agencies to determine whether their launch would jeopardize public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States. Proposed Sec. 450.43(b) would provide that the FAA would not make a payload determination over those aspects of payloads that are subject to regulation by the FCC or the

[[Page 15372]]

Department of Commerce. The FAA does not intend to interfere with any requirement that these agencies might impose or with approvals or denials. This clarification is merely a recognition of current practice regarding payloads that do not easily fit into the existing regulatory rubric. The FAA also proposes not to retain the specific reference to NOAA in Sec. 415.53(a). Although commercial remote sensing is currently licensed by NOAA's Office of Commercial Remote Sensing Regulatory Affairs (CRSRA), the Secretary of Commerce recently proposed merging CRSRA with NOAA's Office of Space Commerce and moving them directly under the Office of the Secretary of Commerce. As a result, proposed Sec. 450.43(b) would revise the description of which payloads are exempt, to clarify that a payload planning to conduct remote sensing operations would be exempt if licensed by any office within the Department of Commerce. In consolidating the informational requirements in parts 415, 431, and 435, the FAA proposes to eliminate information requirements concerning the method of securing a payload that was a requirement under Sec. 431.57(g) for RLVs because that information is not relevant to a payload review. The FAA considered replacing that informational requirement with a more general one to provide the potential of the payload to affect the dynamics of the vehicle. However, the FAA determined such information was more pertinent to the vehicle operator and should instead be included in systems safety analysis for the launch or reentry, if appropriate. Proposed Sec. 450.43(i)(1) also would require an applicant to provide an expanded description for the payload that would include its composition and any hosted payloads in addition to the current requirements of physical dimensions and weight. The FAA proposes to ask for any foreign ownership of the payload or payload operator. In addition, the FAA would add the approximate transit times to final orbit for the payload. The FAA proposes to elaborate what it means by intended payload operations during the life of the payload by adding its anticipated life span and any planned disposal. Further, it proposes a requirement to describe any encryption associated with data storage on the payload and transmissions to or from the payload. Encryption helps ensure against cyber intrusion, loss of spacecraft control, and potential debris-causing events. The FAA is proposing these additions to the information requirements for launches to assist other federal agencies because NASA and the Department of Defense frequently have requested this information in response to the FAA's interagency review in order to determine whether the proposed payload would jeopardize the safety of government property in outer space, or U.S. national security. The FAA also proposes to add a general requirement that it may request any other information necessary to make a determination based on public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States. The FAA believes that it would rarely invoke this provision but believes that it is crucial to address unique payloads. The FAA anticipates that for payload classes--as distinguished from specific payloads--the applicant might only be able to provide a range of expected transit times and would find this acceptable. Similarly, for classes of payloads the FAA would find it appropriate to provide ranges for information related to size of the payload and quantities of hazardous materials. It also proposes to add the explosive potential of payload materials, alone and in combination with other materials on the payload for launches, as it already does for reentries because the information is equally relevant to the safety of a launch as for a reentry. The FAA anticipates that these additional data requirements would impose minimal burden, if any, on the applicant. For example, the payload operator should already have detailed plans for moving its payload to its final destination, and the explosive equivalent for most materials is easily calculated using readily-available information. As another example, in requesting information about what encryption, if any, is used, the FAA is not asking for a detailed account of encryption methodology. Many operators are already using 256-bit Advanced Encryption Standard encryption (AES-256) to protect commercial telemetry, tracking, and control data links and mission data transmission or storage. In this case, an operator would only need to state that it uses AES-256. These additional data requirements help inform the overall evaluation of a payload. By specifying in its regulations what is required to expedite the FAA's payload review process without the need to make supplemental requests to an applicant to address interagency concerns, and the applicant would avoid having to respond to such requests. The FAA seeks comment on this proposed approach.

D. Safety Review and Approval

As part of its current licensing process under parts 415 and 431, the FAA conducts a safety review to determine whether a proposed launch or reentry will jeopardize public health and safety and safety of property. The FAA would not change the philosophy or purpose of a safety review in this rulemaking. As with the current regulations, an applicant would have to satisfy the safety requirements in order to obtain a license to conduct a launch or reentry. Only a vehicle operator license applicant would be eligible to apply for a safety approval, and may apply for a safety approval separately and incrementally. As with current regulations, the FAA would advise an applicant, in writing, of any issues raised during a safety review that would impede issuance of a license, and the applicant may respond in writing, or amend its license application in accordance with Sec. 413.17. This proposal would also not change the process by which the FAA denies a license, and the recourse afforded an applicant if a license is denied. For launches and reentries from, or to, a Federal launch range or any launch or reentry site where a Federal launch range provides safety-related launch or reentry services or property by contract, the FAA would accept the service or property as meeting the relevant requirements of proposed part 450, as long as the FAA determines that the Federal launch range's safety requirements for the launch or reentry services or property provided satisfy those requirements. Note that a Federal launch range could, at the direction of the operator, provide FSA products such a debris risk analyses or flight safety limits analyses, directly to the FAA on behalf of an operator. While the FAA is not proposing to change the philosophy and purpose of a safety review and approval, the FAA is proposing changes to the requirements to obtain a safety approval. The FAA proposes to locate the application requirements for a safety approval in proposed Sec. 450.45 (Safety Review and Approval), in paragraph (e), and throughout proposed subpart C. The application requirements in proposed Sec. 450.45(e) are general and not specific to any safety requirement, and would include information not covered explicitly in proposed subpart C. Proposed Sec. 450.45(e)(1) would address basic requirements for an application, such as the inclusion of a glossary of terms and a listing of referenced material. This proposed requirement is similar to current Sec. 415.107, although

[[Page 15373]]

the proposed regulation would not include the requirement for an application to be logically organized, with a clear and consistent page numbering system, and topics cross-referenced. The FAA expects an applicant to ensure its application meets these basic organizational standards without explicitly requiring them. In proposed Sec. 450.45(e)(2), the FAA would require an applicant to submit information about its launch or reentry site. This proposed requirement is similar to current Sec. 415.109(a), with the addition of references to a reentry site. In proposed Sec. 450.45(e)(3), the FAA would require an applicant to submit information about its launch or reentry vehicle, including safety critical systems. This proposed requirement is similar to current Sec. 415.109(b), but would include reentry vehicles in addition to launch vehicles. In proposed Sec. 450.45(e)(4), the FAA would require an applicant to submit a generic launch or reentry processing schedule that identifies any readiness activities, such as reviews and rehearsals, each safety-critical preflight operation, and day of flight activities. Although the proposed regulations do not necessarily require reviews or rehearsals, should the applicant propose them to meet readiness requirements, they should be included in the schedule. This proposed requirement is similar to current Sec. 415.119, but with the addition of reentry vehicles. Proposed Sec. 450.45(e)(5) would apply to any proposed launch or reentry with a human being on board the vehicle, and would require an applicant to demonstrate compliance with certain safety requirements in part 460. This proposed requirement is similar to current Sec. 415.8, except that it would include reentry vehicles. Proposed Sec. 450.45(e)(6) would address the potential launch or reentry of radionuclides, similar to current Sec. 415.115(b) but with the addition of reentries. Because such proposals are rare, it is the current practice of the FAA to address the public safety issues on a case-by-case basis. This proposed rule would not change this approach. Lastly, in proposed Sec. 450.45(e)(7), the FAA would reserve the right to request additional information if necessary. This request would include information incorporated by reference in the license application, such as a previous application submittal. The FAA could also request additional products that would allow the FAA to conduct an independent safety analysis. The FAA periodically conducts independent system safety and flight safety analyses in order to gain a deeper understanding of the safety issues associated with a launch or reentry proposal. This independent analysis is particularly important for novel systems or operations. The FAA proposes to continue this practice with this rulemaking. Proposed subpart C would contain the remainder of the application requirements for a safety approval. With some exceptions, discussed later, each safety requirement in proposed subpart C has application requirements articulated at the end of each section. Under current regulations for ELVs, application requirements are contained in part 415, while safety requirements are contained in part 417. Under current regulations for RLVs contained in part 431, application requirements and safety requirements are not distinguished so clearly. The proposed approach is designed to clearly separate safety requirements from application requirements. However, the following proposed sections do not include application requirements, either because they introduce other sections or because the FAA would not require a demonstration of compliance to obtain a license: 1. Sec. 450.101: This section would address the core public safety criteria for launching a launch vehicle or reentering a reentry vehicle. An applicant would demonstrate that it can meet these criteria in other parts of proposed subpart C. 2. Sec. 450.113 (Flight Safety Analysis Requirements--Scope and Applicability): This section would address the scope and applicability of the FSA requirements contained in Sec. Sec. 450.113 through 450.141. 3. Sec. 450.157: This section would include requirements for communication procedures, but an applicant would not have to demonstrate compliance with this section in order to obtain a license. 4. Sec. 450.159: This section would include requirements for preflight procedures. Similar to proposed Sec. 450.157, an applicant would not have to demonstrate compliance with this section in order to obtain a license. 5. Sec. 450.169: This section would include requirements for launch and reentry collision avoidance analysis. An applicant would not have to demonstrate compliance with this section in order to obtain a license, but it would have to provide certain information to the FAA prior to a launch or reentry. 6. Sec. 450.179 (Ground Safety--General): This section would address the scope and applicability of the ground safety requirements contained in Sec. Sec. 450.181 (Coordination with a Site Operator) through 450.189.

E. Environmental Review

The FAA proposes to consolidate environmental review requirements for launch and reentry operators in a single section, as proposed Sec. 450.47 (Environmental Review). Currently, these requirements are set forth in Sec. Sec. 415.201, 415.203, 431.91, 431.93, and 435.61. In addition, the FAA proposes to revise current Sec. Sec. 420.15, 433.7, 433.9, and 437.21 to conform to the changes in proposed Sec. 450.47. Apart from consolidation, these proposed revisions would not alter the current environmental review process. The FAA is responsible for complying with the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders prior to issuing a launch or reentry license. To comply with NEPA, the FAA must first determine whether the licensing action requires a Categorical Exclusion (CATEX), an Environmental Assessment (EA), or an Environmental Impact Statement (EIS). A CATEX is appropriate when actions, individually or cumulatively, do not have a significant effect on the human environment. An EA broadly documents evidence and analysis necessary to determine whether a proposed action may significantly affect the human environment requiring the preparation of an EIS or results in a finding of no significant impact (FONSI). If the action may significantly affect the human environment, NEPA requires preparation of an EIS. An EIS is a thorough analysis of a proposed action's impacts on the environment, including a public involvement process. Under current FAA practice, the issuance of a new launch or reentry license does not fall within the scope of a CATEX. However, an applicant may provide data and analysis to assist the FAA in determining whether a CATEX could apply (including whether an extraordinary circumstance exists) to a license modification. Examples include modifications that are administrative in nature or involve minor facility siting, construction, or maintenance actions. If a CATEX does not apply to the proposed action, but it is not anticipated to have significant environmental effects, then NEPA requires the preparation of an EA instead. The FAA may prepare an EA using applicant-provided information. In the alternative, an applicant may prepare an EA with FAA oversight. When NEPA requires an EIS for commercial space actions, the FAA uses third-party contracting to

[[Page 15374]]

prepare the document. That is, the FAA selects a contractor to prepare the EIS, and the license applicant pays the contractor. Finally, if an EA or EIS was previously developed, the FAA may require a written re- evaluation of the environmental document to ensure the document's continued adequacy, accuracy and validity.\183\ ---------------------------------------------------------------------------

\183\ FAA Order 1050.1F, Environmental Impacts: Policies and Procedures, provides a more detailed description of the FAA's policies and procedures for NEPA and CEQ compliance. ---------------------------------------------------------------------------

This proposed rule would not alter the current environmental review requirements. However, the consolidation of the launch and reentry regulations would require a consolidation of the environmental review requirements.

F. Additional License Terms and Conditions, Transfer of a Vehicle Operator License, Rights Not Conferred by a Vehicle Operator License

As discussed earlier in this preamble, the FAA proposes to consolidate, under proposed part 450, the differing types of launch and reentry licenses, currently in parts 415, 431, and 435, into a single vehicle operator license. As part of this consolidation, the FAA would combine specified sections of parts 415, 431, and 435 into proposed sections of part 450, such that the consolidated requirements would apply to a single vehicle operator license. Except for these changes, the current requirements would remain the same. The specific proposed changes are identified below. 1. Additional Terms and Conditions The FAA proposes to consolidate the current additional terms and conditions requirements in Sec. Sec. 415.11, 431.11, and 435.11 into proposed Sec. 450.9 (Additional License Terms and Conditions) without substantive change. Therefore, the proposed requirement would state that the FAA may amend a vehicle operator license at any time by modifying or adding terms and conditions to the license to ensure compliance with the Act and regulations. 2. Transfer of a Vehicle Operator License The FAA proposes to consolidate the requirements to transfer a license in current Sec. Sec. 415.13, 431.13, and 435.13 into proposed Sec. 450.11 (Transfer of a Vehicle Operator License). Although the location of the requirements would change, the requirements themselves would not substantively change. The proposed requirements would continue to provide that only the FAA may transfer a vehicle operator license; and, that an applicant must submit a license application to transfer a license according to the provisions of part 413 and the requirements of proposed part 450. Also, like the current requirements, the proposal would require an applicant to satisfy all of the approvals and determinations required under part 450 before the FAA would transfer a license to an applicant, and the FAA would retain the ability to incorporate by reference any findings made part of the record to support the initial licensing determination and to modify a license to reflect any changes necessary because of a license transfer. 3. Rights Not Conferred by a Vehicle Operator License The FAA proposes to consolidate in proposed Sec. 450.13 (Rights Not Conferred by a Vehicle Operator License) the requirements in current Sec. Sec. 415.15, 431.15, and 435.15 regarding the rights that are not conferred by issuance of a license. Although the location of the requirements would change, the requirements themselves would not substantively change. The proposed requirements would continue to state that issuance of a vehicle operator license does not relieve a licensee of its obligation to comply with all applicable requirements of law or regulation that may apply to its activities. In addition, the proposal would state the issuance of a license does not confer any proprietary, property or exclusive right in the use of any Federal launch range or related facilities, airspace, or outer space.

G. Unique Safety Policies, Requirements, and Practices

Proposed Sec. 450.177 (Unique Policies, Requirements and Practices) would require an operator to review operations, system designs, analysis, and testing, and to identify any unique launch or reentry hazards not otherwise addressed by proposed part 450, consistent with current regulations and practice. An operator would be required to implement any unique safety policy, requirement, or practice needed to protect the public from the unique hazard. In its application, an operator would have to identify any unique safety policy, requirement, or practice, and demonstrate that each it protects public health and safety and the safety of property. Proposed Sec. 450.177 would also provide that the FAA may identify and impose a unique policy, requirement, or practice, as needed, to protect the public health and safety, safety of property, and the national security and foreign policy interests of the United States. In its application, an operator would need to demonstrate that each unique safety policy, requirement, or practice imposed by the FAA protects public health and safety, safety of property, and the national security and foreign policy interests of the United States. Proposed Sec. 450.177 is largely the same as Sec. 417.127 with two differences. Section 417.127 requires an applicant to file a request for license modification for any change to a unique safety policy, requirement, or practice. The FAA would not incorporate this requirement in proposed part 450 because it is duplicative given the general license modification requirement in proposed Sec. 450.177. Also, Sec. 417.127 applies only when necessary to protect the public, whereas proposed Sec. 450.177(b) would also apply to national security and foreign policy interests of the United States. This is necessary to cover the full scope of FAA's licensing authority. The purpose for this proposed section is the same as for current Sec. 417.127. As the space transportation industry continues to grow, advances in technology and implementation of innovations by launch and reentry operators will likely introduce new and unforeseen safety challenges. These unique challenges will require FAA officials and operators to collaborate on a case-by-case basis to identify and mitigate those unique hazards to public health and safety, safety of property, and the national security and foreign policy interests of the United States not specifically addressed by proposed part 450.

H. Compliance Monitoring

The FAA proposes to combine the compliance monitoring requirements of parts 417 and 431 into Sec. 450.209 (Compliance Monitoring). In combining the requirements, the FAA would adopt Sec. 417.23. The FAA currently conducts safety inspections to ensure a licensee complies with applicable regulations, the terms and conditions of its license, and representations the licensee made in its application. Compliance monitoring requirements are codified in Sec. Sec. 417.23, 431.83, and 435.51. Section 417.23 requires that a launch operator cooperate with and allow Federal officers or employees access to observe any of its activities associated with the conduct of a licensed launch, and provide the FAA with a console for monitoring the countdown's progress, and the communication on all channels of the countdown communication network. The requirements of Sec. Sec. 417.23(a) and 431.83 are nearly identical in that both require a licensee to cooperate with and

[[Page 15375]]

to allow Federal officers or employees access to observe any of its activities associated with the conduct of a licensed RLV mission. However, unlike Sec. 417.23, Sec. 431.83 does not require a licensee to provide a console to the FAA for monitoring all the channels on the countdown communication network. Monitoring the communications channels--including countdown, anomaly, range coordination, surveillance, and weather--is a vital part of compliance monitoring and safety inspection operations, regardless of operation type. Under part 417, a licensee cooperates with the FAA and provides its inspectors with access and consoles to observe the activities associated with the licensed launch. As a result, the FAA is able to monitor all communication channels, and has access to the safety official and the mission director through the communications panel and through a phone line. FAA inspectors regularly monitor an operator's communications channels. In doing so, an inspector can become aware of issues that arise during a countdown. These issues may include vehicle health, ground operations, FSS health, range readiness, clearance of surveillance and hazard areas, weather, and countdown procedures. Additionally, listening to the communications channels also gives an inspector a sense of an operator's safety culture, rigor, and readiness. In addition, inspectors can communicate face-to-face with the safety official and the mission director, if necessary, because they are typically collocated. Although there is a requirement in part 431, and incorporated by reference in part 435, that an operator cooperate with safety inspectors, there is no specific requirement for the licensee to provide access to all communication channels. The FAA has had to discuss with the operator what channels will be available for monitoring during these operations. Some operators have contended that their employees will not be as forthcoming with information if they know FAA inspectors are listening. However, being able to hear how the operator communicates during critical operations is necessary for inspectors to determine compliance and to address problems before they occur. Since inspectors cannot physically listen to all channels concurrently, an inspector will listen to one or more channels that can provide situational awareness and information used to determine compliance. The necessary discussions require additional time and may cause a delay, consume man-hours, and is a cost to both the government and the operator during the license application phase, or potentially during a launch countdown. Regarding the contention that personnel are less likely to discuss problems if inspectors are monitoring their conversation, the FAA strives to be as unobtrusive as possible so as not to affect operations. Additionally, the purpose of compliance monitoring is not to punish operators. Rather, channel monitoring and on-site inspection allows inspectors to identify potential licensing issues and alert the operator, so it can take action to maintain or return to compliance. This approach ensures safety while minimizing impacts to the operator. There have been many instances where inspectors noticed incorrect test setups for FSS checks, for example, or other issues during compliance monitoring that would affect public safety, and informed the operator so they could be corrected before safety was impacted. Compliance monitoring is important for ensuring public safety and requires that FAA safety inspectors be exposed to actual operations in order to be trained, qualified, and capable of performing their safety- critical role. Because safety inspectors are trained to detect non- compliances, they need to have access to, and the discretion to see and hear, as much of the operation as they deem necessary. Observing activities for training and familiarization purposes benefits both the inspectors and the operator because the more familiar an inspector is with an operation, the better he or she can perform the inspection. Knowledgeable inspectors cause less operational impacts because they ask fewer questions and are less likely to incorrectly identify a non- compliance. The FAA proposes to combine the compliance monitoring requirements of Sec. Sec. 417.23 and 431.83 in proposed Sec. 450.209. The proposed regulation would primarily adopt those requirements in Sec. 417.23, but ``launch operator'' would be replaced by ``licensee'', and ``licensed launch'' would be replaced by ``licensed launch or reentry.'' Additionally, the FAA proposes to allow an operator the option to provide the FAA with means other than a console for monitoring the communication and countdown channels. For example, a smaller company may operate without consoles, in which case the operator may provide the FAA with radio monitoring and a location in close proximity to the necessary data to monitor launch. As a result, the compliance monitoring requirements of proposed Sec. 450.209 would apply to all launch and reentry operations, thereby capturing licensed launch operations under current part 417 and licensed RLV operations under current part 431. Proposed Sec. 450.209 also codifies current FAA practice for conducting compliance monitoring of part 435 operations. Proposed Sec. 450.209(b) would require the licensee to provide the FAA with a console or other means for monitoring the countdown and communication network. This proposed requirement would alleviate the issues that result from extended negotiations. The option for ``other means'' would provide the operator with some flexibility, as the FAA recognizes that operations may occur with temporary infrastructure and a console may be an unrealistic request. In this case, the operator would be expected to provide the FAA with an alternative method to monitor communications that is approved by the FAA prior to operations.

I. Registration of Space Objects

The FAA proposes to consolidate the requirements for the registration of space objects in proposed Sec. 450.217 (Registration of Space Objects). These requirements currently reside in Sec. Sec. 417.19 and 431.85 and are largely identical. This proposal would not change the substantive requirements of either section, except to add a registration requirement for objects owned by a foreign entity. The 1975 Convention on Registration of Objects Launched into Outer Space (Registration Convention), to which the United States is a signatory, requires details about the orbit of each space object. To that end, current regulations require an applicant to provide information on space objects that the FAA forwards to the Department of State. The Department of State then registers the objects with the United Nations as required by the Registration Convention. Since enacting these current regulations, the Department of State has requested that the FAA also provide this information for objects possibly owned by foreign entities. Current registration of space objects requirements is codified in Sec. 417.19, applicable to ELVs, and Sec. 431.85, applicable to RLVs. The two provisions are substantively identical in all respects but one. That is, they both require the registration of any object placed in space by a licensed mission, unless the object is owned and registered by the U.S. Government or owned by a foreign entity. Similarly, both sections require the licensee to submit information about the space object's international designator, the date and location of the mission, the general function of the space object, and

[[Page 15376]]

the final orbital parameters. The sole substantive distinction is that Sec. 431.85 also requires an operator to notify the FAA when it removes a space object. Proposed Sec. 450.217 would deviate from current Sec. Sec. 417.19 and 431.85 by requiring the registration of foreign-owned space objects. The FAA would not require the licensee to determine the owner's nationality. The Department of State would use this information to ensure that other nations meet their obligations by registering their foreign objects. Proper registration of all objects owned by foreign entities would allow for the protection of the United States from liability associated with these objects. Otherwise, the FAA would retain the same informational requirements. It would continue to require a licensee to submit information about the space object's international designator, the date and location of the mission, the general function of the space object, and the final orbital parameters. Additionally, proposed Sec. 450.217 would retain current Sec. 431.85's requirement that an operator notify the FAA when it removes a space object.

J. Public Safety Responsibility, Compliance With License, Records, Financial Responsibility, and Human Spaceflight Requirements

The FAA is not proposing any substantive changes to the requirements specified below. However, the agency is proposing to consolidate these requirements into the new, proposed part 450; clarify that the consolidated requirements apply to any licensed launch or reentry; and make other minor, clarifying edits. The following is a summary of the proposed changes: 1. Public Safety Responsibility and Compliance With License The FAA would consolidate the public safety responsibility requirements in current Sec. Sec. 417.7 and 431.71(a) into proposed Sec. 450.201 (Public Safety Responsibility). Also, the FAA would move the compliance requirement in current Sec. 431.71(b) to its own section, proposed Sec. 450.203, Compliance with License. Although the location of these requirements would change, the requirements themselves would not change. Therefore, proposed Sec. 450.201 would provide that a licensee is responsible for ensuring public safety and safety of property during the conduct of a licensed launch or reentry. Proposed Sec. 450.203 (Compliance with License) would require that a licensee conduct a licensed launch or reentry in accordance with representations made in its license application, the requirements of proposed part 450, subparts C and D, and the terms and conditions contained in the license. The proposed requirement for a licensee to conduct a licensed launch or reentry in accordance with representations made in its license application is the same, in substance, to Sec. Sec. 417.11(a) and 431.71(b). Section 417.11(a) states that a launch operator must conduct a licensed launch and carry out launch safety procedures in accordance with its application. Section 431.71(b) states that a licensee must conduct a licensed RLV mission and perform RLV safety procedures in accordance with representations made in its license application. The fact that representations made in a license application become binding on a licensee is discussed earlier in this preamble. The proposed requirement for a licensee to conduct a licensed launch or reentry in accordance with the requirements of proposed part 450, subparts C and D, is the same, in substance, to Sec. 417.1(b)(2)'s treatment of part 417 requirements. Section 417.1(b)(2) states that the safety requirements of part 417, subparts B through E, apply to all licensed launches of expendable launch vehicles. Part 431 does not have a similar requirement because application requirements and safety requirements are interlinked, leaving uncertain the actual safety requirements under a license. Note that in subpart C, the application requirement paragraphs do not apply once a license is issued, unless a licensee applies for a modification. The proposed requirement for a licensee to conduct a licensed launch or reentry in accordance with the terms and conditions contained in the license is the same, in substance, to Sec. Sec. 415.9(b) and 431.71(b). Section 415.9(b) states that a launch license authorizes a licensee to conduct a launch or launches subject to the licensee's compliance with terms and conditions contained in license orders accompanying the license. Section 431.71(b) states that a licensee's failure to comply with any license condition is sufficient basis for the revocation of a license or other appropriate enforcement action. The FAA includes terms and conditions in a license to address license- specific requirements. Under the proposal, a licensee's failure to act in accordance with these items would be sufficient basis to revoke a license, or some other appropriate enforcement action. 2. Financial Responsibility The FAA would consolidate the current financial responsibility requirements in Sec. Sec. 417.21 and 431.81 into proposed Sec. 450.205 (Financial Responsibility Requirements). Although the location of the requirements would change, the requirements themselves would not change. As such, the proposed regulation would require a licensee to comply with financial responsible requirements as required by part 440, and as specified in a license or license order. 3. Human Spaceflight The FAA would consolidate the human spaceflight requirements in current Sec. Sec. 415.8, 431.8, and 435.8 into proposed Sec. 450.207 (Human Spaceflight Requirements). The proposal would require a licensee conducting a launch or reentry with a human being on board the vehicle to comply with human spaceflight requirements as required by part 460 of this chapter and as specified in a license or license order. Although the location of the requirements would change, the requirements themselves would not change. 4. Records The FAA would consolidate the current record requirements in Sec. Sec. 417.15(a) and (b) and 431.77(a) and (b) into proposed Sec. 450.219(a) and (b). However, the FAA would replace the terms ``launch accident'' and ``launch incident'' in Sec. 417.15(b) and the terms ``launch accident,'' ``reentry accident,'' ``launch incident,'' and ``reentry incident'' in Sec. 431.77(b) with ``class 1 or class 2 mishap.'' As discussed in more detail earlier in this preamble, the FAA proposes to replace current part 401 definitions involving ``accident,'' ``incident,'' and ``mishap'' with specified mishap classes. The proposed regulation would require an operator to maintain, for 3 years, all records, data, and other material necessary to verify that a launch or reentry is conducted in accordance with representations contained in the operator's application, the requirements of subparts C and D, and the terms and conditions contained in the license. To satisfy this requirement, the FAA expects an operator to keep a record of the actual conditions at the time of flight and any deviations outside of the flight commit criteria as specified in the current Sec. 417.113(c). Similar to current requirements, in the event of a class 1 or class 2 mishap, an operator would be required to preserve all records related to the event until the completion of any

[[Page 15377]]

Federal investigation (which could be greater than 3 years) and the FAA has notified the operator that the records need no longer be retained. The operator would need to make all records required to be maintained under the regulations available to Federal officials for inspection and copying.

K. Applicability

1. General Proposed Sec. 450.1 (Applicability) would state that part 450 prescribes requirements for obtaining and maintaining a license to launch, reenter, or both launch and reenter, a launch or reentry vehicle. As discussed previously, proposed part 450 would consolidate licensing requirements currently covered in parts 415, 417, 431, and 435. 2. Grandfathering Under proposed Sec. 450.1(b), proposed part 450 would not apply to any launch or reentry that an operator elects to conduct pursuant to a license issued by the FAA or an application accepted by the FAA prior to the effective date of proposed part 450, with two exceptions. The proposed requirements for collision avoidance analysis (COLA) and asset protection would apply to all operators subject to the FAA's authority under 51 U.S.C. chapter 509 who are conducting launches after the effective date of the new regulations. The FAA would determine the applicability of proposed part 450 to an application for a license modification submitted after the effective date of the part on a case- by-case basis. The proposed regulations are more performance based, and many of the current requirements would serve as a means of compliance to meet the proposed regulations. As a result, activities authorized under the existing regulations would be authorized under the proposed regulations. The FAA proposes to allow an operator to operate under the current regulations (specifically, parts 401, 415, 417, 431, and 435) when conducting a launch after the effective date of new part 450 provided it holds a license or has had a license application accepted prior to the effective date of this regulation. Pursuant to Space Policy Directive-3 \184\ (SPD-3), proposed Sec. 450.169 and proposed appendix A to part 450 would align the COLA criteria with current common practice and provide better protection for inhabitable and active orbiting objects. Additionally, Sec. 450.101 would require that the probability of loss of functionality for each critical asset must not exceed 1 x 10-\3\ to protect national assets. For that reason, the FAA is proposing that all operators would be required to comply with these two provisions on this rule's effective date. ---------------------------------------------------------------------------

\184\ Space Policy Directive-3, National Space Traffic Management Policy, 83 FR 28969 (June 21, 2018). ---------------------------------------------------------------------------

Because many of the current regulations would serve as a means of compliance for the proposed regulations, the FAA would review license modifications that applied the current regulations as means of demonstrating compliance with the proposed regulations. Additionally, an operator could use a means of compliance other than the current regulations to demonstrate compliance in a license modification request. The FAA would determine the applicability of proposed part 450 to an application for a license modification submitted after the effective date of the part on a case-by-case basis. The FAA does not anticipate that a vehicle operator would have any greater difficulty meeting the requirements under the proposed regulations than under the existing regulations. In fact, the FAA believes that the proposed regulations are more flexible because most allow for many different means of compliance. An applicant for a renewal would be required to meet all the requirements of proposed part 450. The FAA anticipates that this would not be burdensome for operators seeking license renewals because there would be few, if any, additional application requirements that could not be fulfilled by reference to previously submitted information.

L. Equivalent Level of Safety

In addition to developing performance-based requirements, this proposal would preserve the equivalent-level-of-safety flexibility by relocating the provision to proposed Sec. 450.37. Unlike using a means of compliance, which requires demonstration of compliance with a performance-based regulation, the ELOS provision would continue to allow an applicant to propose an alternative method to meet the safety intent of a current regulatory requirement. For example, Sec. 450.117(d)(3) would require representative normal flight trajectory analysis outputs for each one second of flight. An applicant may wish to request an ELOS determination to the one-second interval, and the FAA would likely accept it if an alternative interval provides smooth and continuous individual PC contours. To demonstrate equivalent level of safety, an operator would provide a clear and convincing demonstration, through technical rationale, that the proposed alternative approach provided a level of safety equivalent to the requirement it would replace. An ELOS determination means an approximately equal level of safety as determined by qualitative or quantitative means. Under Sec. 450.37(b), an operator would not be able to use an ELOS determination to replace the public risk criteria set forth in Sec. 450.101. In 2018, the FAA issued a final rule that expanded the option to satisfy commercial space transportation requirements by demonstrating an equivalent level of safety in order to provide more choice to operators and reduce the number of waivers that must be prepared by industry and processed by the government.\185\ To utilize the option, operators are required to demonstrate that they are achieving a level of safety equivalent to any safety parameters specified in the regulations. The FAA evaluates every request for an alternative means of regulatory compliance under the ELOS provisions to ensure that the safety of the public, property, or any national security or foreign policy interest of the United States is maintained to be consistent with the requirements in 14 CFR chapter III. The FAA would preserve the process established in the 2018 rulemaking, and would include its ELOS determination as part of any license issued applying this provision. ---------------------------------------------------------------------------

\185\ Updates to Rulemaking and Waiver Procedures and Expansion of the Equivalent Level of Safety Option, Final Rule, 83 FR 28528 (June 20, 2018). ---------------------------------------------------------------------------

The FAA requests comment on the potential use of ``safety cases'' when demonstrating an equivalent level of safety under proposed Sec. 450.37. A safety case is a structured argument, supported by a body of evidence that provides a compelling, comprehensive, and valid case that a system is safe, for a given application in a given environment.\186\ The ARC report (at p. 25) suggested that FAA review time could be minimize if applicant submittals were ``structured as a reasonable safety case that the proposed actions are safe under all plausible scenarios.'' In fact, the ARC suggested ``safety cases'' could be useful options several times. With respect to the proposed regulation, a safety case would potentially show that certain requirements identified by the applicant, excluding the requirements of Sec. 450.101, need not be complied with per se in order to demonstrate that an alternative approach provides an equivalent level of safety to the

[[Page 15378]]

requirements identified by the applicant. ---------------------------------------------------------------------------

\186\ This Safety Case definition is from the U.K. Ministry of Defence (MOD) Standard 00-56, ``Safety Management Requirements for Defence Systems.'' ---------------------------------------------------------------------------

A-P-T Research, Inc., under contract to the FAA, recommended the use of a safety case approach as an alternate path to securing a license.\187\ The FAA considered proposing a safety case approach to demonstrating an equivalent level of safety under proposed Sec. 450.37 that would include a formal proposal process that must use a means of compliance accepted by the Administrator, unless the Administrator determines otherwise based on predicted public risks and consequences, or demonstrated reliability. The formal proposal process would: (1) Facilitate an FAA audit of all risk management methods proposed for use, including a demonstration of how the proposed methods can demonstrate compliance with Sec. 450.101; (2) implement all the recommended improvements from the audit or justify all deviations from the recommended improvements; (3) document the risk management methods used and the verification evidence to demonstrate compliance with Sec. 450.101; (4) facilitate an audit by an FAA-approved third party of the risk management methods used and the verification evidence to demonstrate compliance with Sec. 450.101; and (5) submit the results of the third party audit for FAA review and approval. An applicant that sought to use this safety case approach would need to submit: (1) A description of their plan to facilitate an FAA audit of all risk management methods proposed for use, including a demonstration of how the proposed methods can demonstrate compliance with Sec. 450.101; (2) a description of the improvements implemented based on the FAA audit and detailed justifications for any deviations from the FAA recommended improvements; (3) a description of the risk management methods used and the verification evidence to demonstrate compliance with Sec. 450.101; (4) an agreement to facilitate an audit by an FAA-approved third party of the risk management methods used and the verification evidence to demonstrate compliance with Sec. 450.101; and (5) a description of the results of the third party audit. The safety case approach recommended by APT included the use of a third party to review. The FAA sees potential complications, including liability considerations, when involving a third party in the licensing process. The FAA seeks comments on the potential usefulness and challenges associated with a safety case approach, whether or not a third party would be involved. ---------------------------------------------------------------------------

\187\ A-P-T Research, Inc. ``A New Path to Launch Licenses,'' Doc. No. CDSP-FL004-18-00402 (October 16, 2018). ---------------------------------------------------------------------------

Additional Technical Justification and Rationale

The sections below provide detailed discussions of flight safety analyses and software safety. Additionally, this section discusses the numerous conforming changes the FAA proposes to the existing regulations in order to implement the proposed regulations.

A. Flight Safety Analyses

As discussed earlier, for purposes of this proposed rule, an FSA consists of a set of quantitative analyses used to determine flight commit criteria, flight abort rules, flight hazard areas, and other mitigation measures, and to verify compliance with the public safety criteria in proposed Sec. 450.101. The FAA proposes 15 sections for flight safety analysis, as discussed below. 1. Scope and Applicability Proposed Sec. 450.113 establishes the portions of flight for which an operator would be required to perform and document an FSA, and would describe the analyses required for each type of operation. The portion of flight governed by the public safety criteria is central to the scope of the FSA. The current scope of FSA regulations is laid out in Sec. Sec. 417.201 and 417.107(b) for ELVs. Specifically, Sec. 417.107(b)(1) currently requires that FSAs quantify the collective risks from lift- off through orbital insertion for orbital launches and from lift-off to final impact for suborbital launches. Unfortunately, Sec. 417.107(b)(2) does not clearly specify the portion of flight for which an FSA must quantify the individual risks. In practice, the FAA has reconciled this vagueness by requiring the same scope for both collective and individual risks: From lift-off through orbital insertion for orbital launches and from lift-off to final impact for suborbital launches. It is also unclear in current regulations what portions of flight the FSA needs to cover for RLVs. Section 431.35(b)(1) simply states that the collective public risk limit applies to each proposed reentry, but does not speak specifically to beginning and end of the period of flight that an FSA must analyze. Reentry means to return or attempt to return, purposefully, a reentry vehicle from earth orbit or from outer space to Earth.\188\ Reentry includes activities conducted in Earth orbit or outer space to determine reentry readiness and that are critical to ensuring public health and safety and the safety of property during reentry flight. The definition also includes activities conducted on the ground after vehicle landing on Earth to ensure the vehicle does not pose a threat to public health and safety or the safety of property. In practice, the FAA has required public risk assessments to begin at the final health check prior to initiation of de-orbit burn and ending when flight stops, such as splashdown for a capsule. ---------------------------------------------------------------------------

\188\ 14 CFR 401.5. ---------------------------------------------------------------------------

Further, for both ELVs and RLVs, the current regulations do not expressly address the potential public safety hazards caused by the disposal of a launch vehicle stage or component from orbit. That is, Sec. Sec. 417.107(b) and 431.35(b)(1), in addressing the public risk criteria, do not specifically address the disposal of launch vehicle stages or components. As discussed earlier, such vehicle disposals have become more common in recent years, reflecting the elevated priority put on orbital debris mitigation. The FAA explained in the 2016 final rule \189\ that when the FAA requires that the quantitative risk analysis account for the planned impact of a first stage (or any stage) jettisoned prior to orbital insertion, it includes accounting for stage impacts regardless of whether the actual impact occurs before or after orbital insertion. ---------------------------------------------------------------------------

\189\ Changing the Collective Risk Limits for Launches and Reentries and Clarifying the Risk Limit Used to Establish Hazard Areas for Ships and Aircraft, Final Rule. 81 FR 47017 (July 20, 2016). ---------------------------------------------------------------------------

For reentry, proposed Sec. Sec. 450.101(b) and 450.113(a)(4) would clarify and reduce the period FSAs must analyze when quantifying the public risks posed by reentry operations. The proposal would clarify that post-flight operations are not included in the safety analyses necessary to quantify the public risks posed by reentry operations. In Sec. 401.5, the FAA proposes to include a definition for deorbit that clarifies that deorbit begins with the final command to commit the vehicle to a perigee below 70 nautical miles, approximately 130 km, and ends when all vehicle components come to rest on the Earth. Proposed Sec. 450.113 replaces Sec. 417.201 to clarify the scope and applicability of FSAs. In proposed Sec. 450.113(a)(1), an operator would be required to perform and document an FSA for orbital launch, from lift-off through orbital insertion,\190\ including any component or stage landings. In proposed Sec. 450.113(a)(2), an operator would be

[[Page 15379]]

required to perform and document an FSA for suborbital launch, from lift-off through final impact. In proposed Sec. 450.113(a)(3), the FAA clarifies the scope of disposal FSA that would be necessary to demonstrate compliance with the disposal safety criteria in proposed Sec. 450.101(d). Specifically, for disposal, an FSA would span from the beginning of the deorbit burn through final impact. ---------------------------------------------------------------------------

\190\ The FAA proposes orbital insertion to mean the point at which a vehicle achieves a minimum 70-nautical mile perigee based on a computation that accounts for drag. This adopts the definition of orbital insertion in RCC 321-17 Standard. ---------------------------------------------------------------------------

Proposed Sec. 450.113(a)(4) would require an operator to perform and document an FSA for reentry, from the beginning of the deorbit burn through landing. The proposal is consistent with current practice, but would clarify that post-landing activities are not included in the FSA. Proposed Sec. 450.113(a)(5) would explicitly address hybrid vehicles, which include air-launch rockets released from carrier aircraft such as the Pegasus rocket carried by a modified L-1011 airliner. The proposal would clarify that FSAs generally apply to hybrid vehicles, for all phases of flight unless the Administrator determines otherwise based on demonstrated reliability. Thus, the proposal would enable an operator of a hybrid vehicle with a high level of demonstrated reliability for the entire flight or for a phase of flight, to be exempt from performing some FSAs without seeking a waiver for the flight or phase of flight. Demonstrated reliability refers to statistically valid probability of failure estimates based on the outcomes of all previous flights of the vehicle or stage. For example, if an applicant seeks to operate a hybrid vehicle that features an air- launch rocket released from a carrier aircraft with minimal modification from the original design certified as a commercial transport aircraft, the FAA would find certain FSAs not applicable if empirical data sufficiently showed that the demonstrated reliability and estimated public risks of the system are equivalent to general aviation aircraft during a given phase of flight. Specifically, the FAA foresees that such an applicant could be exempt from some of the normal flight trajectory analysis requirements during the captive carry phases of flight if the applicant could demonstrate compliance with the public safety criteria in proposed Sec. 450.101 without the benefit of some of the normal flight trajectory analysis outputs. Proposed Sec. 450.113(b) would identify the specific FSA actions applicable to all launch and reentry vehicles (in paragraph (b)(1)), a launch or reentry vehicle that relies on an FSS to comply with proposed Sec. 450.101 (in paragraph (b)(2)), and launch of an unguided suborbital launch vehicle (in paragraph (b)(3)). 2. Flight Safety Analysis Methods Proposed Sec. 450.115 (Flight Safety Analysis Methods) would set the methodology requirements for FSAs. This section would replace the prescriptive requirements currently in Sec. 417.203 and appendices A, B, C and I to part 417. Currently, Sec. 417.203(a) requires that FSAs meet the requirements for methods of analysis contained in appendices A (section A417) and B (section B417) to part 417 for a launch vehicle flown with an FSS, and appendices B and C (section C417) for an unguided suborbital launch vehicle that uses a wind-weighting safety system. Specifically, section A417 provides prescriptive requirements on the FSA methodologies and products for a launch vehicle flown with an FSS. Section B417 provides prescriptive requirements on the FSA for hazard area analyses for ship and aircraft protection. Section C417 provides prescriptive requirements on the FSA methodologies and products for a launch vehicle flown with a wind weighting safety system. Section 417.203(b) specifically lists the broad categories of approved methods of analysis while Sec. 417.203(c) addresses requirements for alternate analysis methods. Section 417.203(c) currently requires that an alternate FSA method be based on accurate data and scientific principles, and is statistically valid. In practice, the FAA has evaluated the validity of an applicant's proposed methods by comparing the results to valid benchmarks such as data from mishaps, test, or validated high-fidelity methods. Section 417.203(e) requires that a launch operator demonstrate to the FAA compliance with the requirements of part 417, subpart C. In its application, a launch operator must include the analysis products required by parts 415, subpart F, 417, subpart A, and appendices A, B, C, and I, depending on whether the launch vehicle uses an FSS or a wind-weighting safety system. Pursuant to Sec. 431.35(c), the FSA for an RLV is required to account for any reasonably foreseeable hazardous event and safety- critical system failures during launch flight or reentry that could result in a casualty to the public. However, part 431 does not include requirements for the methods used to provide an FSA, thus providing no standards for evaluating an FSA's validity or level of fidelity. The part 431 license applications approved by the FAA included FSA methodologies and products comparable to those in 417 license applications. Proposed Sec. 450.115(a) sets the scope for FSA methods. This section would not materially change the scope of the FSA methods under current parts 417 and 431, which account for the risk to the public from hazards associated with normal and malfunctioning vehicle flight in accordance to Sec. 417.205(a). However, proposed Sec. 450.115(a) would add language currently not expressly provided in Sec. 417.205(a) that would require an operator's FSA method to account for all reasonably foreseeable events and failure of safety-critical systems. This language is consistent with the current requirement in Sec. 431.35(c) to account for any reasonably foreseeable hazardous event, and safety-critical system failures during launch flight or reentry that could result in a casualty to the public. Proposed Sec. 450.115(b) would establish the level of fidelity for FSAs. Specifically, it would require a level of fidelity sufficient to demonstrate that any risk to the public would satisfy the public risk criteria of proposed Sec. 450.101, including the use of mitigations, accounting for all known sources of uncertainty, using a means of compliance accepted by the Administrator. It would also require that the analysis identify the dominant source of each type of public risk with a criterion in proposed Sec. 450.101(a) or (b) in terms of phase of flight, source of hazard (such as toxic exposure, inert, or explosive debris), and vehicle response mode. Thus, this proposed rule would provide performance targets instead of the current part 417 approach that mandates a single level of fidelity equivalent to methods that comply with the extensive requirements given in the appendices of part 417. The requirements in proposed Sec. 450.115(b) would account for all known sources of uncertainty and identify the dominant sources of risk. The proposal would be consistent with the best practices of other regulatory agencies that use quantitative risk analyses as part of a risk management approach to ensure public safety. The Nuclear Regulatory Commission (NRC), which has a long history of performance- based regulations with quantitative risk analyses to ensure public safety, has a long-standing policy to ensure that the quantitative techniques used for regulatory decision-making take into account the potential uncertainties that exist so that an estimate can be made on the confidence level to be ascribed to the quantitative

[[Page 15380]]

results.\191\ The NRC has also found that, through use of quantitative techniques, important uncertainties have been, and continue to be, brought into better focus and may even be reduced as compared to those that would remain with sole reliance on deterministic decision-making. The NRC found that direct lack of severe accident experience makes it necessary that proper attention be given not only to the range of uncertainty surrounding probabilistic estimates, but also to the phenomenology that most influences the uncertainties. In other words, the NRC found the need to identify the dominant sources of public risks and their uncertainties when using quantitative risk analyses to ensure public safety.\192\ ---------------------------------------------------------------------------

\191\ Nuclear Regulatory Commission, Nuclear Regulatory Safety Policy Goals. 51 FR 28044 (August 21, 1986). \192\ The Department of the Interior (DOI), Bureau of Reclamation, uses risk criteria for achieving public protection in dam safety decision-making in a manner consistent with this proposed rule. Specifically, the DOI uses mean values calculated from Monte Carlo or similar analyses that include explicit treatment of input uncertainty. ---------------------------------------------------------------------------

The FAA would require that operators use a means of compliance accepted by the Administrator for FSA methods. The FAA plans to publish a draft version of that AC concurrently with this NPRM. An important aspect of that AC is the use of approaches generally consistent with the consensus U.S. Government standards on launch and reentry risk assessments (e.g., RCC 321). The RCC 321 Standard (paragraph 2.4) recognizes that there is significant uncertainty in the computed risks of rocket launches and notes that confidence bounds of 90 percent describing the uncertainty in the computed risk can span multiple orders of magnitude. Thus, the consensus U.S. Government standards on launch and reentry risk assessments contains a policy statement that uncertainty cannot be ignored. The RCC 321 Supplement further concurred with several statements originally made by the NRC, including the following three: (1) The use of mean estimates does not, however, resolve the need to quantify (to the extent reasonable) and understand those important uncertainties involved in risk predictions; (2) sensitivity studies should be performed to determine those uncertainties most important to the probabilistic estimates; and (3) the results of sensitivity studies should be displayed showing, for example, the range of variation together with the underlying science or engineering assumptions that dominate this variation. Even so, the RCC went on to conclude that a formal uncertainty analysis may not be necessary under conditions where the best mean estimate of the public risk is low relative to the collective risk criterion. For this rulemaking, the FAA considered adopting an approach to the treatment of uncertainty following RCC 321 Standard and Supplement. The FAA requests comment on whether this treatment of uncertainty is reasonable. Specifically, the FAA solicits input on the process whereby the uncertainty does not have to be considered if the computed risk is less than one-third of the primary aggregated collective risk criterion.\193\ Current Air Force practice is to include implementation of measures to improve risk analyses to reduce the level of uncertainty when the predicted risks exceed 3 x 10-5 EC. Examples of that could include refined input data or a higher-fidelity method for the risk computations. ---------------------------------------------------------------------------

\193\ The choice of one-third was consistent with the recommendation in AFSPCMAN 91-710 Vol.1, 1 July 2004. Attachment 5 states that if risk to all individuals from a single hazard exceeds an EC of 30 x 10-6, a range user may have to take additional measures to protect personnel and resources. Examples include to fix, correct, or improve existing non- compliances, improve risk analyses to reduce the level of uncertainty, require a day-of-launch risk analysis, or establish disaster aversion criteria. ---------------------------------------------------------------------------

Similarly, if the estimated risk level exceeds 3 x 10-5 EC, the RCC 321 Standard states that the range should compute the uncertainty to ensure that a launch is not allowed that would violate the criterion based on best estimates that account for uncertainty. There are published examples of uncertainty analyses for launch risks that explicitly account for uncertainties associated with the input data (e.g., the probability of failure associated with a given break-up state vector), and biases and uncertainties in key sub- models (e.g., the sub-model used to compute the PC given an impact with a given piece of debris on a specific structure type). However, the end effect of the RCC 321 Standard approach to uncertainty treatment is that a range or range user could continue operating under current practice, using their current tools without formal uncertainty quantification for missions with a collective risk no greater than 3 x 10-5 EC. Under the RCC approach, only missions that pose collective risks above 3 x 10-5 EC based on point estimates would be required to perform formal uncertainty quantification. The FAA requests comment on whether the current approaches to uncertainty treatment employed by the RCC or the Air Force are viable in the FAA's regulatory framework. The FAA further requests comments on any currently available approaches to address uncertainties in public risk assessments, including the approach identified in the draft means of compliance on uncertainty and level of fidelity in FSA methods. Proposed Sec. 450.115(b) would require that an operator account for all known sources of uncertainty in various FSAs. The FAA intends to ensure that FSA methods account for known sources of aleatory (random) uncertainties that are the result of inherently random processes. An example of aleatory uncertainty is the influence of prevailing weather conditions on the results of collective and individual risk analyses for launch or reentry. The true EC is often highly influenced by the prevailing weather conditions during the proposed operation. The uncertainty in the true EC due to weather conditions is substantial for a typical baseline risk analysis that accounts for the foreseeable weather conditions in a given month based upon historical data and assumes that an operation is equally feasible under any of those likely weather conditions given all the safety and mission assurance constraints. For example, most vehicles would not attempt to fly through certain wind conditions due to the potential for the vehicle to break up or veer off-course, leading to a violation of safety or mission assurance constraints. The uncertainty in the true EC for a day-of-launch risk analysis is much smaller, but the uncertainty in any forecast or measured weather input data will still produce some uncertainty in the EC due to measurement errors and variability in the weather measurements and forecasts. There are several other potentially important sources of aleatory uncertainty in an EC analysis, and there are various valid approaches to account for these aleatory uncertainties. This proposed rule would require that aleatory uncertainties are accounted for, including known sources of randomness in critical input data. These would include normal and malfunction trajectories, weather conditions, population and sheltering characteristics (e.g., between day and night), velocities induced during break-up, aerodynamic properties of the vehicle and debris, any yield from an explosive impact, and the amount of debris that burns up due to aero-thermal heating during re-entry. Proposed Sec. 450.115(c) would establish application requirements for methods of analysis. Specifically, the proposed rule would require that an applicant submit a description of the FSA methodology for each launch or reentry approved by the FAA, including identification of the

[[Page 15381]]

scientific principles and statistical methods used, and all assumptions and their justifications. However, if the FAA determines that the range's FSA methods meets FAA safety requirements, then the operator would not be required to provide the FAA with a description of the FSA methodology. Also, an applicant would be required to include the rationale for the level of fidelity, the evidence for validation and verification required by proposed Sec. 450.101(g), the extent that the benchmark conditions are comparable to the foreseeable conditions of the intended operations, and the extent the analyses accounted for risk mitigations. The FAA intends for assumptions to be justified using logic, historical flight experience data, relevant test data, and the results from physics-based simulations. 3. Trajectory Analysis for Normal Flight The FAA proposes a single regulation governing an FSA for normal trajectories, applicable to all launch and reentry vehicles, in proposed Sec. 450.117 (Trajectory Analysis for Normal Flight). The provision would distinguish between variability in the intended trajectory and uncertainties due to random sources of dispersion such as winds and vehicle performance. It would also clarify application requirements. All the FSAs depend on some form of analysis of the trajectory under normal conditions, otherwise known as a normal trajectory. That is, one must first understand a vehicle's trajectory when it performs as intended and under normal conditions before one can determine the effects of malfunctions along its flight path. Current regulations for normal trajectory analyses are found in Sec. Sec. 417.207 and 431.35(d) and appendix A to part 417. Section 417.207 sets the current trajectory analysis requirements for ELVs. Section 417.207(a)(1) requires an analysis that establishes the limits of a launch vehicle's normal flight, as defined by the normal trajectory and potential three-sigma trajectory dispersions about the normal trajectory for any time after lift-off. Although this requirement is generally clear, the uncertainties the analysis must consider could be clearer. For example, the current requirement does not distinguish between inherently random uncertainties that could cause the actual trajectory to differ from the nominal trajectory, and variability in the known conditions immediately prior to the initiation of the operation (e.g., weather conditions at the time of the launch or the time into a launch window that the launch occurs for a rendezvous mission). In terms of current RLV regulations in part 431, they describe flight trajectory analyses requirements in a single paragraph in Sec. 431.35(d)(8). Specifically, the FAA requires that applicants provide flight trajectory analyses covering launch or ascent of the vehicle through orbital insertion and reentry or descent of the vehicle through landing, including its three-sigma dispersion. This regulation is silent as to the specific uncertainties for which the analysis must account. In practice, part 431 license applicants have provided normal trajectory data consistent with the part 417 regulations. Proposed Sec. 450.117 would retain the substantive normal trajectory analysis requirements currently in Sec. 417.207 and the definitions of key terms such as ``normal flight'' and ``normal trajectory.'' Proposed Sec. 450.117(a)(1) would require a trajectory analysis that establishes the limits of a vehicles normal flight. The proposal would retain the requirement in Sec. 417.207(a)(1) to establish a nominal trajectory where the vehicle performs as designed without any deviation due to winds, propulsion performance, or mass properties but would add clarity about the sources of uncertainty that a trajectory analysis must account for by distinguishing between variability and random uncertainty. Specifically, the proposal would expressly require a trajectory analysis to establish two separate sets of trajectories to characterize distinct sources of uncertainty, including variability and random uncertainty. One set of normal trajectories in Sec. 450.117(a)(1)(ii) would characterize the uncertainty during normal flight due to random deviations from ideal conditions, such as wind conditions, vehicle mass, and performance characteristics. Another set of normal trajectories in Sec. 450.117(a)(1)(i) would characterize how the intended trajectory could vary due to conditions known prior to initiation of flight. An example of variability is how the intended trajectory would change due to different times for lift-off within a launch window that lasts several minutes for a mission with an orbital rendezvous as the primary objective. Another example of variability is how the intended trajectory would change due to wind conditions. In such cases, the nominal trajectory represents the most likely lift-off time. An FSA must distinguish between variability and random uncertainty in the normal trajectory in order to demonstrate that the criteria in proposed Sec. 450.101 would be satisfied at any time the operator intends to initiate launch or re-entry flight. Section 450.117(a)(2) would require a fuel exhaustion trajectory that produces instantaneous impact points with the greatest range for any given time after liftoff for any stage that has the potential to impact the Earth and does not burn to propellant depletion before a programmed thrust termination. This is the same as current Sec. 417.207(a)(2). The FAA is unaware of any challenges with the current regulation regarding a fuel exhaustion trajectory. For vehicles with an FSS, proposed Sec. 450.117(a)(3) would establish a new requirement for trajectory data or parameters that describe the limits of a useful mission. The FAA proposes in Sec. 401.5 to define the ``limits of a useful mission'' as the trajectory data or other parameters that describes the limits of a mission that can attain the primary objective, including but not limited to flight azimuth limits. Thus, the proposal would require an operator to establish the limits of a useful mission based on the values of trajectory parameters necessary to attain the primary mission objective, including flight azimuth limits. Note that the azimuth limit data is currently required by the Air Force in Air Force Space Command Manual (AFSPCMAN) 91-710 Vol. 2. The limits of a useful mission are essential input data for the flight safety limits analysis, and for an evaluation of whether a vehicle should be allowed to pass through a gate, as discussed later in this preamble. Proposed Sec. 450.117(b) would require a final trajectory analysis to use a six-degree of freedom trajectory model, and proposed Sec. 450.117(c) would require a trajectory analysis to account for all wind effects, including profiles of winds that are no less severe than the worst wind conditions under which flight might be attempted, and for uncertainty in the wind conditions. These are similar to Sec. 417.207(b) and (c), respectively. Proposed Sec. 450.117(d) would provide application requirements for trajectory analyses that address the proposed methodology, input data, and output data. In paragraph (d)(1), an applicant would be required to describe the methodology used to characterize normal flight and the limits of a useful mission, including the scientific principles and statistical methods used, all assumptions and their justifications, the rationale for the level of fidelity of the methods, and the evidence for validation and verification that would be required by proposed Sec. 450.101(g). In paragraph (d)(2), the FAA proposes to require that the applicant describe the

[[Page 15382]]

input data used in normal trajectory analyses and provides a list of the minimum input data an applicant must describe. In paragraph (d)(3), the FAA proposes to require that an applicant describe a representative normal trajectory analysis outputs (e.g., position, velocity, and vacuum instantaneous impact point) for each second of flight for (1) the nominal trajectory, (2) a fuel exhaustion trajectory under otherwise nominal conditions, (3) a set of trajectories that characterize variability in the intended trajectory based on conditions known prior to initiation of flight, (4) a set of trajectories that characterize how the actual trajectory could differ from the intended trajectory due to random uncertainties, and (5) a set of trajectories that characterize the limits of a useful mission as described in proposed Sec. 450.117(a). The proposed application requirements provide regulatory clarity regarding the normal trajectory characterization necessary to ensure compliance with proposed Sec. 450.101. Note that in this proposed section, and other proposed flight safety analysis application requirements, the FAA requires representative data. This allows the FAA to evaluate an applicant's methodologies. Representative data should be the best, meaning the most realistic, data available given the intended flight parameters. The applicant would also be required to submit additional products that allow the FAA to conduct an independent analysis, if requested by the Administrator. This same application requirement would also be in proposed Sec. Sec. 450.119 through 450.141. At times, the FAA conducts independent flight safety analyses which usually require additional information than is normally required of an applicant. Instead of attempting to list out what is needed for every independent analysis, which is usually case-specific, the FAA proposes to simply state that more information may be necessary. The FAA's conduct of an independent analysis is usually reserved for new vehicle concepts, new analysis methods, or proposals that involve unique public safety issues. 4. Trajectory Analysis for Malfunction Flight Proposed Sec. 450.119 (Trajectory Analysis for Malfunction Flight) would consolidate trajectory analysis requirements for all launch and reentry vehicles. In consolidating, the FAA would also update its requirements to reflect advancements in trajectory analysis capabilities and clarify application requirements. A malfunction trajectory analysis is necessary to determine how far a vehicle can deviate from its normal flight path in case of a malfunction. This analysis helps determine impact points in case of a malfunction and is therefore a vital input for the analyses needed to demonstrate compliance with risk criteria. The FAA's current regulations covering trajectory analyses in case of malfunction are in Sec. 417.209 (Malfunction turn analysis), appendix A to part 417, and Sec. 431.35(d)(8). Current Sec. 417.209 sets forth the trajectory analysis requirements in case of a malfunction applicable to ELVs. Section 417.209(a)(1) requires a trajectory analysis to establish the launch vehicle's turning capability in the event of a malfunction during flight using a set of turn curves. Appendix A to part 417 (section A417.9) also provides more detailed and prescriptive requirements for analyzing ``turn curves.'' Turn curve data offered a reasonable way to simulate failures that produce trajectory departures, particularly in response to thrust offsets when computational limitations made it impractical to perform six degrees of freedom (6-DOF) simulations of malfunction trajectories. In the past, turn curves produced a reasonable way to model the classic cornus spiral behavior associated with a constant thrust offset or nozzle burn-through. Thus, Sec. 417.209(b) requires a set of turn curves to establish the launch vehicle velocity vector turn angle from the nominal launch vehicle velocity vector, and to establish the vehicle velocity turn magnitude from the nominal velocity magnitude. There are two fundamental types of malfunction turn curves: (1) One that shows how the magnitude velocity changes during the turn; and (2) the other for the direction of the velocity. Given advancements in computational capabilities, the use of turn curves as mandated by the current regulations constitutes an outdated and unnecessarily simplified analysis technique. For instance, through current computational capabilities, particularly the prevalence of 6-DOF trajectory models, it is generally more efficient and more accurate for an applicant to provide sets of Monte Carlo trajectories that characterize a given type of malfunction, even for the thrust vector offsets and nozzle burn-through, than to provide turn curve data. The current RLV regulations in part 431 do not explicitly address malfunction trajectory analyses. Section 431.35(d)(8) describes flight trajectory analysis requirements in a single paragraph. It requires that applicants provide flight trajectory analyses covering launch or ascent of the vehicle through orbital insertion and reentry or descent of the vehicle through landing, including its three-sigma dispersion. In practice, part 431 license applicants have provided malfunction trajectory analyses consistent with the part 417 regulations. However, the lack of clarity regarding the malfunction trajectory analysis requirements and ensuing discussions between the FAA and operators has resulted in inefficiencies and delays in the licensing process. Proposed Sec. 450.119 would consolidate all trajectory analysis requirements for a malfunctioning flight which would be applicable to any launch or reentry vehicle. Based on the noted advancements in computational capabilities that have rendered the current use of turn curves outdated and over simplistic, the FAA proposes to remove the Sec. 417.209(b) requirements related to turn curves in favor of more modern Monte Carlo methods. Proposed Sec. 450.119(b) would provide performance-based requirements regarding what a malfunction trajectory analysis must account for, including applicable times in flight and valid trajectory time intervals. Specifically, the proposal would require the analysis to account for (1) all trajectory times during the thrusting phases or when the lift vector is controlled during flight, (2) the duration starting when a malfunction begins to cause each flight deviation throughout the thrusting phases of flight, and (3) trajectory time intervals between malfunction turn start times that are sufficient to establish flight safety limits, if any, and individual risk contours that are smooth and continuous. The proposal would retain in Sec. 450.119(b)(4) the performance-based requirement currently in Sec. 417.209(a)(3) to establish the relative probability of occurrence of each malfunction turn of which the vehicle is capable. In proposed Sec. 450.119(b)(5), the analysis would also have to account for the probability distribution of position and velocity of the vehicle when each malfunction will terminate due to vehicle breakup, along with the cause of termination and the state of the vehicle.\194\ Finally, in proposed Sec. 450.119(b)(6), the analysis would establish the vehicle's flight behavior from the time when a malfunction begins to cause a flight deviation until ground impact or predicted structural failure, with trajectory time intervals that are

[[Page 15383]]

sufficient to establish individual risk contours that are smooth and continuous. ---------------------------------------------------------------------------

\194\ The proposed Sec. 450.119(b)(5) requirement would be equivalent to the Sec. 417.209(a)(4) through (9) requirements. Under Sec. 417.209, the FAA prescribed the use of ``turn curves'' that were a particular way to compute the position and velocity at the end of a malfunction trajectory. ---------------------------------------------------------------------------

Finally, proposed Sec. 450.119(c) would provide application requirements for malfunction trajectory analyses that address the proposed methodology, input data, and output data. An applicant would be required to describe the methodology used to characterize malfunction flight including the same elements required for the normal trajectory analyses. The FAA proposes to require that an applicant describe the input data used in malfunction trajectory analyses and provides a list of the minimum data an applicant must describe. The FAA also proposes to require that an applicant describe representative malfunction trajectory analysis outputs (e.g., position, velocity, and vacuum instantaneous impact point) for each second of flight and for the probability of each trajectory that characterizes a type of malfunction flight. Finally, the FAA may also request additional products to conduct an independent analysis. These proposed application requirements are consistent or less burdensome than current requirements. 5. Debris Analysis Proposed Sec. 450.121 (Debris Analysis) would set the requirements for debris analysis by revising current requirements in Sec. 417.211 (Debris analysis), accounting for part 431 practices not fully expressed in the regulatory language, consolidating requirements from Sec. 417.107 (Flight Safety), and removing overly prescriptive and burdensome requirements from Appendix A to part 417. Under Sec. 417.211(a), a debris analysis must identify the inert, explosive, and other hazardous vehicle debris that results from normal and malfunctioning flight. Section 417.211(b) specifies that a debris analysis must account for various causes of a launch vehicle breakup. This analysis includes debris from any flight termination system activation, launch vehicle explosion, aerodynamic loads, inertial loads, atmospheric reentry heating, and impact of an intact vehicle. Section 417.211(c) asks for a list of debris fragments for each cause of breakup and any planned jettison of debris, launch vehicle components, or payload. Also, Sec. 417.107(c) contains debris threshold requirements for debris analysis and appendix A to part 417 (section A417.11) provides detailed direction on the debris analysis constraints, debris models, and other debris analysis products. Although part 431 does not expressly ask for a debris analysis, the FAA has deemed Sec. 431.35(b) to require one, applying the same standards as those in part 417. However, this lack of regulatory specificity in part 431 has led to longer pre-application consultation periods as the FAA and operators worked to ascertain the applicable requirements. Proposed Sec. 450.121 would provide performance-based regulations regarding the level of fidelity required for key elements of a valid debris analysis. Proposed Sec. 450.121(a) would include a debris analysis that characterizes the debris generated for each foreseeable vehicle response mode as a function of vehicle flight time, accounting for the effects of fuel burn and any configuration changes. The FAA proposes to add the references to fuel burn and configuration changes that are absent from current part 417 because an operator's debris list will change over time with variations to the amount of available propellant and with the jettisoning of hardware. Proposed Sec. 450.121(b) would require that the debris analysis account for each foreseeable cause of vehicle breakup, including any breakup caused by an FSS activation or by impact of an intact vehicle. This proposal would include debris from a vehicle's jettisoned components and payloads because such debris could cause a casualty due to impact with an aircraft or waterborne vessel or could pose a toxic or fire hazard. This proposal is consistent with the ARC recommendation to develop a process for a debris catalogue. Foreseeable causes of vehicle breakup would include engine or motor explosion, or exceeding structural limits due to aerodynamic loads, inertial loads, or aerothermal heating. Proposed Sec. 450.121(c) is substantively the same as Sec. 417.107(c). The section contains the debris thresholds requirements. It would adopt the references to inert, explosive, and other hazardous vehicle debris currently in Sec. 417.211(a). The inert debris requirement would include all debris that could impact a human being with a mean expected kinetic energy at impact greater than or equal to 11 ft-lbs, or mean impact kinetic energy per unit area of 34 ft-lb/ in\2\. The required thresholds are well-established standards used by Federal launch ranges. In general, the 11 ft-lb requirement is the primary threshold for debris, whereas the 34 ft-lb/in\2\ is for penetrating injuries. This paragraph also would clarify the need to consider the effects of all inert debris on aircraft or waterborne vessels, or those that pose a toxic or fire hazard. The debris analysis would also be required to identify any explosive debris. Proposed Sec. 450.121(d) would provide the debris analysis application requirements. This paragraph would inherit, in a less detailed and prescriptive manner, the requirements in appendix A to part 417, section A417.11. It would expressly identify the information and data needed by the FAA to evaluate compliance with the regulatory requirements. Proposed Sec. 450.121(d) would describe the level of fidelity required for the products of a debris analysis including (1) a description of the debris analysis methodology, including input data, assumptions, and justifications for the assumptions; (2) a description of all vehicle breakup modes and the development of debris lists; and (3) all debris fragment lists necessary to quantitatively describe the physical, aerodynamic, and harmful characteristics of each debris fragment or fragment class. Finally, as discussed earlier, the applicant would be required to provide additional products as requested by the FAA to conduct an independent analysis to ensure that public safety criteria are satisfied. 6. Flight Safety Limits Analysis Proposed Sec. 450.123 would set the requirements to identify uncontrolled areas and establish flight safety limits that define when an operator must initiate flight abort to (1) ensure compliance with the public safety criteria of proposed Sec. 450.101 and (2) prevent debris capable of causing a casualty from impacting in uncontrolled areas if the vehicle is outside the limits of a useful mission. Current Sec. 417.213(a) requires that a flight safety limits analysis identify the location of populated or other protected areas and establish flight safety limits to define when an FSS must terminate a launch vehicle's flight to prevent hazardous impacts from reaching any protected area and ensure that the public risk criteria of Sec. 417.107(b) are satisfied. Section 417.3 currently defines a flight safety limit as criteria to ensure a set of impact limit lines established for the flight of a launch vehicle flown with an FSS bound the area where debris with a ballistic coefficient of 3 psf or more is allowed to impact when an FSS functions. Thus, Sec. 417.213(a) and the definition of flight safety limit require that any populated area be protected by flight safety limits from where the FSS must be activated. This requirement is not consistent with operations on Federal launch ranges

[[Page 15384]]

that allow potential debris impact in populated areas inside the impact limit lines, as long as the individual and collective public risks remain within acceptable limits. The requirements in Sec. 417.213(b) are specific about potential contributors to the vehicle and debris dispersions for which the flight safety limits analysis must account including time delays, all wind effects, velocity imparted to vehicle fragments by breakup, all lift and drag forces on the malfunctioning vehicle and falling debris, all launch vehicle guidance and performance errors, all launch vehicle malfunction turn capabilities, and any uncertainty due to map errors and launch vehicle tracking errors. Section 417.213(d) requires that the analysis establish designated impact limit lines to bound the area where debris with a ballistic coefficient of 3 psf is allowed to impact, assuming the FSS functions properly. In contrast, part 431 does not contain any express requirements for a flight safety limits analysis to set flight safety limits. That being said, part 431 license applicants have performed a flight safety limits analysis mirroring part 417 requirements in cases where an FSS was employed to satisfy the public risk criteria in Sec. 431.35(b). The FAA proposes to move the definition of ``flight safety limit'' from current Sec. 417.3 to Sec. 401.5 and update the definition to mean criteria to ensure that public safety is protected from the flight of a vehicle when an FSS functions properly. Thus, the proposal would remove any ballistic coefficient threshold from the definition of a flight safety limit. As previously discussed, the Air Force has permanently waived its previous requirement that embedded a specific ballistic coefficient threshold into the flight safety limits, and the FAA has also waived the corresponding requirement in Sec. 417.213(d).\195\ When the FAA adopted the 3 psf ballistics coefficient standard (in 2006), the FAA recognized that ballistic coefficient is not well correlated with the probability of a casualty producing impact.\196\ Simply put, ballistic coefficient is an imperfect surrogate that was adopted based on past practice when computers were less capable than today. ---------------------------------------------------------------------------

\195\ 81 FR 1470 (January 12, 2016). \196\ Licensing and Safety Requirements for Launch, NPRM. 67 FR 49464 (October 28, 2002). ---------------------------------------------------------------------------

In Sec. 401.5, the proposal would also replace the term ``protected area'' with ``uncontrolled area,'' defined as an area of land not controlled by a launch or reentry operator, a launch or reentry site operator, an adjacent site operator, or other entity by agreement. This change reflects the fact that all members of the public, even those in areas of land controlled by a launch operator, are protected to the extent that collective and individual public risk limits apply everywhere. Specifically, proposed Sec. 450.123(a) would require protection of uncontrolled areas by flight safety limits and ensure compliance with the public safety criteria of proposed Sec. 450.101, while controlled areas would be required to meet only the collective and individual risk requirements (also in accordance with proposed Sec. 450.101). The FAA intends to assess the need for flight safety limits to protect environmentally-sensitive areas in the environmental review process of proposed Sec. 450.47. The FAA anticipates that not all environmentally-sensitive areas will need this protection. For example, current practice for launches from the Western Range protects a National Marine Sanctuary in the Pacific Ocean against planned impacts of jettisoned items, but not against debris from a flight abort. Proposed Sec. 450.123(a) would require an FSA to identify the location of uncontrolled areas and establish flight safety limits that would define when an operator must initiate flight abort to prevent debris capable of causing a casualty from impacting in uncontrolled areas if the vehicle is outside the limits of a useful mission, and to ensure compliance with the public safety criteria of proposed Sec. 450.101. Given flight safety limits are only required to protect people in uncontrolled areas and not people in controlled areas, the proposal would reconcile the current inconsistency between the part 417 requirements versus the current practice at some Federal launch ranges that allows the public's exposure to debris hazards as long as the collective and individual risk criteria are met. Proposed Sec. 450.123(b) would require a flight safety limits analysis to identify flight safety limits for use in establishing flight abort rules. The flight safety limits would be required to account for temporal and geometric extents on the Earth's surface of any vehicle hazards resulting from any planned or unplanned event for all times during flight, and account for potential contributions to the debris impact dispersions. This is the same as Sec. 417.213(b). Proposed Sec. 450.123(b)(3) would add a requirement to design flight safety limits to avoid flight abort under conditions that result in increased collective risk to people in uncontrolled areas, compared to continued flight. The proposed requirement is equivalent to the U.S. Government consensus standard that a conditional risk management process should be implemented to ensure that mission rules do not induce unacceptable consequences when they are implemented.\197\ In the flight safety context, a flight abort is a good example of a safety intervention intended to mitigate public risks, but that typically induces a conditional risk (e.g., a consequence associated with the debris event triggered by the flight abort). A flight safety limits analysis would ideally minimize all foreseeable consequences, not just those to people on the ground or to the extent necessary to meet the public safety criteria. For example, placing flight safety limits in areas where flight abort might place debris on a busy shipping lane or air corridor is not an ideal solution when other locations for the limits could meet the public safety criteria and consequence criteria, and still provide space for the vehicle to fly a useful mission. Also, as a malfunctioning vehicle's debris footprint migrates towards a populated area, the consequence to people on the ground from a flight abort will increase from a low number and possibly reach the proposed consequence limit. The ideal location for a flight safety limit on such trajectory is not at the last location where an abort would still result in meeting the consequence criteria, which would presumably result in a consequence close to the limit, but at a location that minimizes the consequence. This proposed approach could result in flight safety limits that provide debris containment, or nearly so, while also allowing normal flight and flight within the limits of a useful mission without triggering an abort. In summary, the design of the flight safety limits and the associated flight safety rules would be required to avoid an increase in risk induced by a flight abort, compared to inaction or action at a different time. This is relevant to areas where debris containment is not possible, as discussed in greater length in the next section on proposed Sec. 450.125. ---------------------------------------------------------------------------

\197\ RCC 321-10 at p. 2-7. ---------------------------------------------------------------------------

Proposed Sec. 450.123(c) would require the flight safety analysis to include a gate analysis for an orbital launch, or any launch or reentry where one or more trajectories that represents a useful mission intersects a flight safety limit that provides containment of debris capable of causing a casualty. This is also discussed in more detail in the next section on gate analysis. Proposed Sec. 450.123(d) would provide flexibility to allow the computation of

[[Page 15385]]

flight safety limits in real-time in lieu of computing flight safety limits preflight. This alternative would reduce the number of assumptions used in the flight safety limits analysis and allow for a computation that uses the best available data on the vehicle state. The proposal would allow the computation of flight safety limits in real- time to be performed on the ground or onboard the vehicle. The FAA proposes to remove the requirement for a straight-up time analysis currently in Sec. 417.215. A straight-up time analysis establishes when to terminate the flight of a vehicle that fails to pitch over, and thus flies straight up, to achieve debris containment. The straight-up time is not the only method of limiting the risks and consequences to the launch area in the case of a vehicle that flies a straight-up trajectory. Although the express provision is being removed in the proposed rule, the new performance-based analysis permitted under Sec. 450.213 would allow the straight-up time approach to control the hazards from a straight-up flight, but its use would not be required. Proposed Sec. 450.123(e) lays out the application requirements for flight safety limits analyses. The FAA would require an applicant to submit: (1) A description of how each flight safety limit will be computed; (2) representative flight safety limits and associated parameters; (3) an indication of which flight abort rule from proposed Sec. 450.165(c) is used in conjunction with each example flight safety limit; (4) a graphic depiction or series of depictions of representative flight safety limits, the launch or landing point, all uncontrolled area boundaries, and vacuum instantaneous impact point traces for the nominal trajectory, extents of normal flight, and limits of a useful mission trajectories; (5) if the requirement for flight abort is computed in real-time in lieu of precomputing flight safety limits, a description of how the real-time flight abort requirement is computed including references to public safety criteria of Sec. 450.101; and (6) additional products requested by the FAA for an independent analysis when necessary to demonstrate compliance with risk criteria. The proposed application requirements are consistent with current practice under parts 417 and 431. 7. Gate Analysis The FAA proposes Sec. 450.125 to make regulations governing gate analyses more performance-based, flexible, and clear. This change would include revising the definition of ``gate'' and, as discussed earlier, adding a definition of the ``limits of a useful mission.'' The proposal would also add an option to relax flight safety criteria without using a gate. Current Sec. 417.3 defines a ``gate'' as the portion of a flight safety limit boundary through which the tracking icon of a launch vehicle flown with an FSS may pass without flight termination. As discussed earlier, a gate is an opening in a flight safety limit through which a vehicle may fly, provided the vehicle meets certain pre-defined conditions such that the vehicle performance indicates an ability to continue safe flight. If the vehicle fails to meet the required conditions to pass a gate, then flight abort would occur at the flight safety limit. In other words, the gate would be closed. The FAA has requirements for an overflight gate analysis in Sec. 417.217 and appendix A, section A417.17, and for a hold-and-resume gate analysis in Sec. 417.218. An overflight gate analysis determines whether a vehicle can overfly populated areas. This analysis requires a launch operator determine why it is safe to allow flight through a flight safety limit--the limit that protects populated or protected areas--without terminating a flight. This analysis accounts for the fact that it is potentially more dangerous to populated or protected areas to destroy a malfunctioning vehicle during certain portions of a launch than not to destroy it. In some circumstances, a destroyed vehicle may disperse debris over a wider area affecting more people than if the vehicle were to impact intact. The primary purpose of flight safety limits and gates is to establish safe locations and conditions to abort the flight prior to the vehicle entering a region or condition where it may endanger populated or other protected areas if flight were to continue. From an operator's perspective, a gate should allow the vehicle to fly through a flight safety limit when the trajectory corresponds to a useful mission.\198\ Otherwise, a flight abort would be required for every flight that intersects with a flight safety limit even if the mission can still have a successful outcome. The optimal use of flight safety limits and gates would be to prevent vehicles that cannot achieve a useful mission from continuing flight, even when the flight is along a trajectory that crosses a gate. ---------------------------------------------------------------------------

\198\ As discussed earlier in this preamble, the FAA proposes in Sec. 401.5 to define the ``limits of a useful mission'' as the trajectory data or other parameters that describes the limits of a mission that can attain the primary objective, including but not limited to flight azimuth limits. ---------------------------------------------------------------------------

The current gate regulations imply that gates are the only option when debris containment is not possible along a trajectory that represents a useful mission, whether it is normal or outside of the normal trajectory envelope. This requirement does not reflect current practice at the Federal launch ranges. Federal launch ranges sometimes relax flight safety limits to allow continued flight for these trajectories without the use of a gate, as long as the operations satisfies the collective risk criterion. Also, some Federal launch ranges do not currently require explicit identification of the conditional risk posed by a vehicle that flies on a trajectory within the normal trajectory envelope or the limits of a useful mission. The preflight risk due to such a trajectory is often small because the vehicle is not likely to deviate far from nominal. However, a gate or relaxed flight safety limit to allow flight on such a trajectory implies that the risk must be acceptable given that the vehicle does fly on such a trajectory. Such a failure to identify the conditional risk associated with such a trajectory as part of the gate analysis is inconsistent with the U.S. Government consensus standard (RCC 321-17 paragraph 2.3.6) that a conditional risk management process should be implemented to ensure that mission rules do not induce unacceptable levels of risk when they are implemented. Although part 431 has no requirements related to gate analysis, the one orbital RLV operation licensed to date employed an FSS and performed a gate analysis. The FAA's proposed Sec. 450.125 would establish a single set of performance-based gate analysis requirements applicable to all launch and reentry vehicles. The gate analysis requirements in Sec. Sec. 417.217 and 417.218 would be combined. Proposed Sec. 450.125 would remove prescriptive requirements on the types of gates, standardize the requirements for establishing a gate, and open the possibility of relaxing flight safety limits. The FAA believes an operator should have the freedom to select risk mitigation methods that will present the best safety posture rather than prescribing certain strategies that may not be the best for all scenarios and vehicles. The FAA also proposes to revise the existing definition of ``gate'' in Sec. 401.5 to replace the term ``flight termination'' with ``flight abort'' and to add language to reflect that the flight must remain within specified parameters to avoid flight abort. Proposed Sec. 450.125(a) would require a gate analysis for an orbital launch, or

[[Page 15386]]

any launch or reentry where one or more trajectories that represents a useful mission intersects a flight safety limit that provides containment of debris capable of causing a casualty. Proposed Sec. 450.125(b) would set the gate analysis requirements. The FAA would require an analysis to establish a relaxation of flight safety limits to allow continued flight or a gate where a decision will be made to abort the launch or reentry, or allow continued flight. If a gate is established, the analysis should establish a measure of performance at the gate that would enable the flight abort crew or autonomous FSS to determine whether the vehicle is able to complete a useful mission, and abort the flight if it is not. Further, the analysis should establish accompanying flight abort rules. Finally, for an orbital launch, the analysis should establish a gate at the last opportunity to determine whether the vehicle's flight is in compliance with the flight abort rules and can make a useful mission, and abort the flight if not. This last requirement would achieve the goal of assuring that only missions that can be useful are allowed to proceed to orbit, thereby limiting the potential for space debris. In addition, when the vehicle performance does not demonstrate an ability to reach a minimum safe orbit (without an imminent random reentry), meaning it cannot pass the useful mission requirement, the regulation would require that flight abort occur. In proposed Sec. 450.125(c), the FAA would require the extents of any gate or relaxation of the flight safety limits to be based on normal trajectories, trajectories that may achieve a useful mission, collective risk, and consequence criteria. In proposed Sec. 450.125(c)(1), the FAA proposes to require a gate or relaxation of flight safety limits anywhere a flight safety limit intersects with a normal trajectory if that trajectory would meet the individual and collective risk criteria of proposed Sec. 450.101(a)(1) and (2) or (b)(1) and (2) when treated like a nominal trajectory with normal trajectory dispersions.\199\ Requiring all normal trajectories to be treated like a nominal trajectory with dispersions as input to a conditional risk analysis (given a sample normal trajectory) for the gate analysis would resolve the issue of an incomplete characterization of the conditional risk of a vehicle that flies through what was a flight safety limit while within the normal trajectory envelope. ---------------------------------------------------------------------------

\199\ The FAA would retain the definitions of ``normal flight'' and ``normal trajectory'' currently found in Sec. 417.3. ---------------------------------------------------------------------------

Another requirement of the proposed gate analysis would be that the predicted average consequence from flight abort resulting from any reasonably foreseeable vehicle response mode, in any one-second period of flight, using any modified flight safety limits must not exceed 1 x 10-2 CEC. The goal of this requirement is to ensure that flight safety limits do not create an unacceptable consequence when used, since debris containment is no longer provided. A gate that does not have flight safety limits after the gate would not need to meet this consequence criterion since it would be placed at the same location as flight safety limits that do provide debris containment. Under the proposal, any intersections of flight safety limits with normal trajectories would result in flight safety limits that are relaxed enough to allow passage, or an open gate in the flight safety limit as long as there is enough data available to confirm that the vehicle is healthy (i.e., appears capable of reaching a minimum safe perigee). Flight on normal trajectories must still meet the public safety criteria in proposed Sec. 450.101, so this practice would ensure acceptable risks and use the best available data to confirm that a vehicle is unlikely to fail before being allowed to fly through a gate, if one is present. Whether flight safety limits would be relaxed enough to let a vehicle fly through that area, or be gated, is optional. A gate is preferred if it would reduce risk, given that there is sufficient information available to make a decision on whether the vehicle is sufficiently healthy to pass. This practice would align with the Federal launch range's current practice and meet the intent of the current requirement in Sec. 417.107(a)(2). In proposed Sec. 450.125(c)(2), trajectories that are outside of normal flight but within the limits of a useful mission would be evaluated as potential normal trajectories. Proposed Sec. 450.125(c)(2) would allow flight safety limits to be gated or relaxed where they intersect with any trajectory within the limits of a useful mission, if the trajectory would meet the individual and collective risk criteria of proposed Sec. 450.101(a)(1) and (2) or (b)(1) and (2), assuming that the trajectory flown would be treated like a nominal trajectory with normal trajectory dispersions. The predicted average consequence from flight abort resulting from a failure in any one- second period of flight, using any modified flight safety limits, would be required to not exceed 1 x 10-2 CEC. The philosophy behind proposed Sec. 450.125(c)(2) is to allow a non-normal flight to continue as long as the mission does not pose an unacceptable conditional risk given the present trajectory. A good example of missions that fall into this category are missions that lift-off on an incorrect flight azimuth, usually due to a software input error, such as the Ariane 5 failure on January 25, 2018, during its 97th mission (VA241). Apart from the programming error, these vehicles may be healthy and are not expected to fail more frequently than a flight without the programming error, so these flights should be allowed to continue if they meet the individual and collective risk criteria on the present azimuth (unless the risk from planned debris impacts was unacceptable on the present flight azimuth). If they do not, such flights would be required to implement an abort. This proposal is consistent with the ARC's recommendation to expand part 431 to include flight abort rules that apply when the vehicle is performing outside of its profile and is unable to reach a useful orbit or survive, and needs to be terminated prior to overflight of a populated area. Proposed Sec. 450.125(d) would establish the application requirements for gate analyses. Specifically, the proposal would require an applicant to submit a description of the methodology used to establish each gate or relaxation of a flight safety limit; a description of the measure of performance used to determine whether a vehicle will be allowed to cross a gate without flight abort, the acceptable ranges of the measure of performance, and how these ranges were determined; a graphic depiction showing representative flight safety limits, any protected uncontrolled area overflight regions, and instantaneous impact point traces for the nominal trajectory, extents of normal flight, and limits of a useful mission trajectories; and any additional products requested by the FAA to conduct an independent analysis when necessary to ensure that public risk criteria are not exceeded. The proposed application requirements are consistent with current practice under parts 417 and 431. 8. Data Loss Flight Time and Planned Safe Flight State Analyses The FAA proposes to consolidate and update data loss flight times and planned safe flight states requirements in proposed Sec. 450.127 (Data Loss Flight Time and Planned Safe Flight State Analyses). Data loss flight time analyses are used to establish when an operator must abort a flight following the loss of vehicle tracking information. In Sec. 417.3,

[[Page 15387]]

the FAA currently defines ``data loss flight time'' as the shortest elapsed thrusting time during which a launch vehicle flown with an FSS can move from its normal trajectory to a condition where it is possible for the launch vehicle to endanger the public. This definition is unclear as to what constitutes a condition where it is possible for the launch vehicle to endanger the public. Given the overall approach to impact limit lines in Sec. 417.213(d) and the treatment of data loss flight times in appendix A to part 417, section A417.19, the FAA has interpreted the definition to mean any impact on a protected area with debris greater than 3 psf ballistic coefficient. With this proposal, the FAA would move the definition of ``data loss flight time'' from current Sec. 417.3 to Sec. 401.5 and update the definition to mean the shortest elapsed thrusting or gliding time during which a vehicle flown with an FSS can move from its trajectory to a condition where it is possible for the vehicle to violate a flight safety limit. An important change in the definition would be the replacement of ``move from its normal trajectory'' with ``move from its trajectory.'' Computing data loss flight times initialized using normal trajectories or nominal trajectories would both be acceptable means of compliance with the proposed regulation, since using the former should be more conservative. This resolves the issue of varying practices at different ranges and provides additional flexibility. In Sec. 417.219(a), the FAA requires a launch operator to establish data loss flight times and a planned safe flight state. In Sec. 417.219(b), the FAA requires that thrust be considered as a means of moving a vehicle towards a protected area, but some vehicles can also glide a significant distance using lift. Further, Sec. 417.219(b) requires the data loss flight time to be relative to reaching protected areas, not flight safety limits. The requirements in Sec. 417.219(c) also include a method of establishing the planned safe flight state that includes the subjective phrase ``the absence of a flight safety system would not significantly increase the accumulated risk from debris impacts.'' Data loss times are currently computed in different ways at Federal launch ranges, with some initializing the computation from the nominal trajectory and some from trajectories within the normal trajectory envelope, sometimes referred to as ``dispersed'' trajectories. Part 431 has no requirements related to analysis to establish data loss flight times or planned safe flight state. However, the one orbital RLV operation licensed to date employed an FSS and established data loss flight times. The FAA's proposed Sec. 450.127(a) would require an FSA to establish data loss flight times and a planned safe flight state for each flight to establish each flight abort rule that applies when vehicle tracking data is not available for use by the flight abort crew or autonomous FSS. Substantively, this proposal is consistent with the current rule in Sec. 417.219(a). However, the FAA's proposal would update language to account for autonomous FSS and the use of the term flight abort in place of flight termination. Proposed Sec. 450.127(b)(1) would retain the data loss flight time analysis requirements consistent with Sec. 417.219, but with the addition of gliding flight as a means of moving a vehicle towards flight safety limits (in lieu of protected areas in accordance with Sec. 417.219). The proposal would replace the subjective method of establishing the safe flight state with a more straightforward method of analyzing when the vehicle's state vector reaches a state where the vehicle is no longer required to have a flight safety system. This is to avoid aborting a flight due to loss of track data during a phase of flight in which track data is not required to ensure safe flight. Thus, the proposal would encourage operators to avoid a flight abort, which often correlates with creating debris, due to loss of track data when in an area where flight abort is not required to meet the regulations. Proposed Sec. 450.127(b)(2) would require data loss flight times to account for forces that may stop the vehicle before reaching a flight safety limit, such as aerodynamic forces that exceed the structural limits of the vehicle. When more conservative methods are used, such as assuming an instantaneous turn towards the nearest flight safety limit, data loss flight times can be underestimated in that a vehicle could not physically perform the turn without breaking up. Data loss flight times that are unrealistically low create the risk of an unnecessary abort (and thus, an unnecessary debris event) if track is lost, since track may return and allow flight to continue if the data loss flight times are greater. Proposed Sec. 450.127(b)(3) would allow the computation of data loss flight times in real-time in lieu of only computations made preflight. This proposal would allow for a computation using the last- known state vector of the vehicle before track was lost. Proposed Sec. 450.127(b)(3) would allow the computation of data loss flight times to be performed on the ground or onboard the vehicle, depending on whether a traditional command destruct or autonomous flight safety system is used. In proposed Sec. 450.127(c), the requirements regarding the planned safe flight state would be consistent with those currently in Sec. 417.219(c), only generalized to apply to reentry as well as launch. Proposed Sec. 450.127(c)(1) would update the Sec. 417.219(c)(1) requirement using new terminology without any change to the meaning. Proposed Sec. 450.127(d) lays out the application requirements for data loss flight time and planned safe flight state analyses. Specifically, the proposal would require an applicant to submit a description of the methodology used to determine data loss flight times; tabular data describing the data loss flight times from a representative mission; the safe flight state and methodology used to determine it; and any additional products requested by the FAA to conduct an independent analysis. 9. Time Delay Analysis For ELVs, Sec. 417.221(a) requires a time delay analysis that establishes the mean elapsed time between the violation of a flight termination rule and the time when the flight safety system is capable of terminating flight for use in establishing flight safety limits. Section 417.221(b) requires the analysis to determine a time delay distribution that accounts for the variance of all time delays for each potential failure scenario, a flight safety official's decision and reaction time, and flight termination hardware and software delays which includes all delays inherent in tracking systems, data processing systems, display systems, command control systems, and flight termination systems. The FAA has also required time delay analyses for RLVs under the current regulatory scheme. Specifically, Sec. 431.39(a) requires an RLV license applicant to submit contingency abort plans, if any, that ensure safe conduct of mission operations during nominal and non- nominal vehicle flight. In practice, a time delay analysis has been necessary to ensure safe conduct of an RLV that uses flight abort. The FAA proposes to streamline the regulations governing the analysis of time delay in proposed Sec. 450.129 (Time Delay Analysis). Proposed Sec. 450.129(a) would use language identical to Sec. 417.221(a), except that the term ``terminating'' would be replaced with the term ``aborting.'' The proposal would replace the list of time delay contributions prescribed in Sec. 417.221(b) with a performance- based requirement in proposed Sec. 450.129(a), that the time delay analysis would be required to

[[Page 15388]]

determine a time delay distribution that accounts for all foreseeable sources of delay. Proposed Sec. 450.129(b) would list application requirements. Specifically, the proposal would require an applicant to submit a description of the methodology used in the time delay analysis, a tabular listing of each time delay source and the total delay, with uncertainty, and any additional products the FAA would request to conduct an independent analysis. 10. Probability of Failure Proposed Sec. 450.131 (Probability of Failure Analysis) would cover probability of failure (POF) analysis requirements for all launch and reentry vehicles. The proposal would also make application requirements clearer and implement performance-based requirements to address allocation to flight times and vehicle response modes. The proposed POF performance requirements would allow an operator to employ alternative, potentially innovative methodologies so long as the results satisfy proposed requirements such as valid input data. Current regulations covering POF analysis requirements for ELVs are found in Sec. 417.224. Part 431 does not have requirements for a POF analysis. Even so, a POF analysis is necessary to demonstrate compliance with the public risk criteria set for RLV operations in Sec. 431.35(b). Section 417.224(a) requires that POF analyses use accurate data, scientific principles, and a method that is statistically or probabilistically valid. For vehicles with fewer than two flights, the POF must account for the outcome of all previous launches of vehicles developed and launched in similar circumstances. If a vehicle has more than two flights, the POF analysis must account for the outcomes of all previous flights of the vehicle in a statistically valid manner. Section 417.224(a) does not address the use of data on partial failures and anomalies, which is a shortcoming the FAA seeks to correct. Section 417.224(b) defines failure to mean when a launch vehicle does not complete any phase of normal flight, or when any anomalous condition exhibits the potential for a stage or its debris to impact the Earth or reenter the atmosphere during the mission, or any future mission, of similar launch vehicle capability. The paragraph makes clear a launch incident or accident also constitutes a failure. Finally, Section 417.224(c) explains that previous flights begin when the launch vehicle normally or inadvertently lifts off from a launch platform and that liftoff occurs with any motion of the launch vehicle with respect to the launch platform. Although the Sec. 417.224 definitions have generally served the FAA and the industry well, Sec. 417.224 lacks requirements to address allocation to flight times and vehicle response modes (VRMs), even though these allocations are necessary to determine the public risks posed by various VRMs at various times in flight. Given POF is a primary factor in any risk computation, it is impossible for an applicant to demonstrate compliance with the quantitative public risk criteria without an analysis to determine the probability of any reasonably foreseeable outcome, such as an on-trajectory loss of thrust or a malfunction turn ending in aerodynamic break-up. The FAA would retain the substantive Sec. 417.224 POF analysis requirements in proposed Sec. 450.131, including the definitions of key terms such as ``failure'' and ``previous flight''. However, the proposal would apply to all launch and reentry vehicles. In addition, it would clarify the data a POF analysis must use to establish a valid allocation to flight times and vehicle response modes. Proposed Sec. 450.131(a) would retain the same substantive requirements regarding the an operator's estimation of the POF for vehicles with fewer than two flights. However, for vehicles with two or more previous flights, the proposal would change the Sec. 417.224(a) provision by requiring that the outcomes of all previous flights of the vehicle or vehicle stage account for data on partial failures and anomalies including Class 3 and Class 4 mishaps. Thus, the proposal would require an analysis to account for partial failures and anomalies. These changes should improve the credibility of POF analyses by giving due credit to stages that succeed even though a subsequent stage fails. For example, consider a vehicle launched two times, with a failure during the second stage on the first launch and no failures during the second launch. For the third launch, the proposal would allow a probability of failure analysis to account for the fact that the first stage flew twice without a failure, while the second stage flew twice with one failure. Proposed Sec. 450.131(b) would retain essentially the same definition of ``failure'' used in Sec. 417.224(b), with changes using the proposed mishap terminology (Class 1 or Class 2) and to cover other vehicles beyond ELVs. Proposed Sec. 450.131(c) would retain essentially the same definition of ``previous flight'' for FSA purposes, with changes intended to encompass all launch and reentry vehicles, including cases where an operator uses a carrier aircraft. Thus, ``previous flight'' for the purposes of an FSA would cover the flight of a launch vehicle beginning when the vehicle normally or inadvertently lifts off from a launch platform. Liftoff would still occur with any motion of the launch vehicle with respect to the launch platform. The FAA would clarify that this would include a carrier aircraft as a launch platform, and would include any intentional or unintentional separation from the launch platform. In terms of a reentry vehicle, the flight of a reentry vehicle or deorbiting upper stage would begin when a vehicle attempts to initiate a deorbit. Proposed Sec. 450.131(d), titled ``Allocation,'' would establish performance requirements to address POF allocation to flight times and VRMs. The proposal would require that a vehicle POF be distributed across flight times and vehicle response modes consistent with the data available from all previous flights of vehicles developed and launched or reentered in similar circumstances; and data from previous flights of vehicles, stages, or components developed and launched or reentered by the subject vehicle developer or operator. Such data may include previous experience involving similar vehicle, stage, or component design characteristics; development and integration processes, including the extent of integrated system testing; and level of experience of the vehicle operation and development team members. These requirements were not in Sec. 417.224 or part 431. In this context, phases of flight would be defined by planned events affecting the vehicle configuration and its failure rate, such as ignition, first stage flight, stage separation, second stage ignition, second stage flight, payload fairing separation, etc. This proposal would require what is already necessary and thus done in current practice. In proposed Sec. 450.131(e), the FAA would require that a POF allocation account for significant differences in the observed failure rate and the conditional failure rate. The conditional failure rate represents the failure rate conditional on the vehicle or subsystem having survived, without a failure as defined earlier, to a given time in flight. The observed failure rate is the product of the conditional failure rate and the reliability function, which is commonly defined as the probability that the vehicle or subsystem has not failed prior to a given time in flight. For high reliability systems where the reliability function is close to one (by definition),

[[Page 15389]]

the observed failure rate can be approximated as the conditional failure rate. If the overall vehicle or stage POF is below 10 percent (over the entire period of time corresponding to a phase of flight), then this simplified approach produces a relative error less than approximately 0.5 percent, which is generally not considered a significant difference. For lower reliability systems, this approximation does produce a significant difference between the observed failure rate and the conditional failure rate. Here again, the proposal would clarify what is already necessary and thus done in current practice. Proposed Sec. 450.131(e) would also require that a POF analysis use a constant conditional failure rate for each phase of flight, unless there is clear and convincing evidence of a different conditional failure rate for a particular vehicle, stage, or phase of flight. Thus, the proposal would require a POF analysis to assume that the conditional failure rate can be represented as a piece-wise constant function of time for each phase of flight, absent clear and convincing evidence to the contrary. The points that define transitions to a potentially different conditional failure rate must include staging events or other vehicle configuration changes, such as ignition of other engines or rocket motors. In some cases, the FAA anticipates that there will be sufficient evidence to justify a different failure rate, for example during a start-up or shut-down/burnout transient for a rocket motor compared to steady state operation of a stage, engine, or motor. Proposed Sec. 450.131(f) would lay out the FAA's application requirements for POF analyses that address the proposed methodology, assumptions and justification, input data, and output data. An applicant would also be required to provide a complete set of tabular data and graphs of the predicted failure rate and cumulative failure probability for each foreseeable VRM. The proposed requirements are consistent with current practice to the extent that any valid FSA must include the probability of failure assigned to each VRM as a function of time into flight. 11. Flight Hazard Areas The FAA proposes to streamline its regulations on flight hazard area in proposed Sec. 450.133, applicable to all launch and reentry vehicles. The FAA would codify its working definition of ``flight hazard area'' to mean any region of land, sea, or air that must be surveyed, publicized, controlled, or evacuated in order to protect the public health and safety and safety of property. An FSA would include a flight hazard area analysis to identify regions of land, sea, or air where an operation poses a potential hazard to the public. The proposal would reduce the size of the regions of land, sea, and air requiring hazard warnings from normal flight events and would reduce the size of regions requiring surveillance prior to initiating a commercial space transportation operation. These changes would be consistent with practices at Federal launch ranges. The current FAA regulations most pertinent to flight hazard area analysis are found in Sec. Sec. 417.107(b) (Flight safety) and 417.223 (Flight hazard analysis) for ELVs, and Sec. Sec. 431.35(b) (Acceptable reusable launch vehicle mission risk) and 431.43(b) (Reusable launch vehicle mission operational requirements and restrictions) for RLVs. Both the ELV and RLV regulations require flight hazard areas to protect against hazards posed by vehicle malfunctions (e.g., an in-flight break-up) and normal flight events that create hazards (e.g., any planned jettison of debris, launch vehicle components, or vehicle stages). The FAA currently sets requirements to warn of, or limit the operations of, ELVs and RLVs in regions where planned debris impacts are likely, for example, due to jettisoned stages. In Sec. 417.223(b), the FAA currently requires flight hazard area analyses to establish ship and aircraft hazard area warnings to mariners and airman in regions that encompass the three-sigma impact dispersion area for each planned debris impact. Similar language appears in Sec. 431.43(b), which states that a nominal landing location is suitable if the area of the predicted three-sigma dispersion of the vehicle impacts can be wholly contained within the designated location. In the 2000 final rule, the FAA explained that it intended the three-sigma to refer a location where the vehicle or stage landing would be contained 997 times out of 1000 attempts, or 99.7 percent probability of containment.\200\ Hence, these regulations used the term ``three- sigma'' to refer to a univariate Gaussian distribution,\201\ despite the fact that impact dispersions are bivariate, and not necessarily Gaussian. Notably, neither Sec. 417.223 nor Sec. 431.43 stipulate whether these warning areas must account for all debris or only debris capable of causing a casualty. There is evidence that the separation of large stages can liberate small fragments with a negligible probability of creating a casualty, depending on the nature of the exposed population. For example, people in aircraft are often more vulnerable than people on the ground because a fragment that impacts an aircraft has a much higher kinetic energy due to the velocity of the aircraft. ---------------------------------------------------------------------------

\200\ 65 FR 56618 (September 9, 2000), at 56629. \201\ Gaussian distribution (also known as normal distribution) is a bell-shaped curve, and it is assumed that during any measurement values will follow a normal distribution with an equal number of measurements above and below the mean value. ---------------------------------------------------------------------------

Both the ELV and RLV regulations require public risk controls, such as evacuation or surveillance, to ensure that no individual member of the public is exposed to greater one-in-a-million (1 x 10-6) PC, irrespective of their location on land, sea, or air, to satisfy risk criterion in Sec. Sec. 417.107(b) and 431.35(b). The part 417 regulations address the identification and surveillance of flight hazard areas explicitly in several sections, including Sec. Sec. 417.111(b)(5), 417.121(f), and 417.223 as discussed below. Part 431 regulations do not expressly address flight hazard areas. However, the preamble to the 2000 final rule stated that the individual risk limit of 1 x 10-6 PC would dictate whether or not an area must be evacuated for launch or reentry activity along that trajectory to occur safely, and clarified that limit applied for any person not involved in the licensed activity. Hence, the current RLV regulations clearly intended the evacuation, and surveillance by inference, of any area where a person not involved in the licensed activity would otherwise experience more than 1 x 10-6 PC. Only Sec. 417.223 and associated appendices provide specific direction on conducting flight hazard area analyses. In Sec. 417.223(a), the FAA requires launch operators to perform a flight hazard area analysis that identifies any regions of land, sea, or air that must be surveyed, publicized, controlled, or evacuated in order to control the risk to the public from debris impact hazards. In addition, the current regulation notes that the risk management requirements of Sec. 417.205(a) apply to the flight hazard area analyses. Lastly, Sec. 417. 223(a) paragraph lists factors that the analysis must account for. Regarding aircraft hazard areas, the preamble to part 431 stated that the FAA also reserves discretion to impose measures deemed necessary by that office to protect public safety.\202\ This deference to regional offices for aircraft protection resulted in a lack of clarity and potential unevenness to the aircraft protection requirements potentially imposed on RLV operators. ---------------------------------------------------------------------------

\202\ 65 FR 56618 (September 19, 2000), at 56646. ---------------------------------------------------------------------------

Proposed Sec. 450.133 would establish general requirements for the flight hazard area analysis as well as

[[Page 15390]]

requirements specific to waterborne vessel hazard areas, land hazard areas, airspace hazard volumes, and the license application. The proposal would make uniform to launch and reentry the requirement in current Sec. 417.223(a) that operators must identify any regions of land, sea, or air that must be surveyed, publicized, controlled, or evacuated to the extent necessary to ensure acceptable individual and collective risks. However, as discussed later in this section, the proposed regulations would allow operators to reduce, or otherwise optimize, the size of the warning regions for hazards resulting from normal flight events. The proposal would add a definition of ``flight hazard area'' to Sec. 405.1 to mean any region of land, sea, or air that must be surveyed, publicized, controlled, or evacuated in order to protect the public health and safety, and safety of property. This definition is consistent with the current requirement in Sec. 417.223(a). Note that the proposed definition would allow for the fact that it may be appropriate to issue a public warning for a flight hazard area, but unnecessary to survey or evacuate the area to ensure the public risks are within the criteria given in proposed Sec. 450.101, as explained in the discussion of hazard area surveillance and publication. Proposed Sec. 450.133(a) would also revise the technical factors for which the hazard area analysis must account to remove language limiting those factors to launch activity alone, thus making consistent the regulations for all types of commercial space transportation operations. The proposal would merge current Sec. 417.223(a)(2), (3), and (4) with slight changes into Sec. 450.133(a)(1) to require an operator to account for the ``regions of land, sea, and air potentially exposed to debris impact resulting from normal flight events and from debris hazards resulting from any potential malfunction.'' Proposed Sec. 450.133(a)(5) would also clarify that the analysis must account for all foreseeable sources of debris dispersion during freefall, including wind effects, guidance and control, velocity imparted by break-up or jettison, lift, and drag forces with winds that are no less severe than the worst wind conditions under which flight might be attempted, and uncertainty in the wind conditions. In Sec. 417.223(a)(4), the current regulation implies that the analysis only needed to account for some exposed populations in the vicinity of the launch site. The proposed Sec. 450.133(a) would further clarify that all sources of debris dispersion must be accounted for by removing any ambiguity associated with what constitutes ``in the vicinity of the launch site;'' by eliminating that phrase, and thus ensuring equal protection for all public exposures. Finally, the proposal would clarify that valid flight hazard area analyses would be required to treat all planned debris hazards, planned impacts, and planned landings as a virtual certainty, consistent with current practice and the regulations in sections A417.23 and B417.13. Again, part 431 does not address flight hazard areas, but current practice for RLVs is generally consistent with the ELV regulations. Proposed Sec. 450.133(b)(1), (c)(1), and (d)(1) would align FAA regulations with practices at the Federal launch ranges by allowing operators to reduce or otherwise optimize the size of the regions for warnings of potential hazardous debris resulting from normal flight events. Specifically, in Sec. 417.223(b), the FAA currently requires hazard area analyses to establish ship and aircraft hazard area warnings in regions that encompass the three-sigma impact dispersion area for each planned debris impact. Similar language appears in Sec. 431.43(b), and the FAA previously took the position that ``three- sigma'' in this context referred to 99.7 percent probability of containment (as explained earlier). However, the current regulations do not specify if the confidence of containment applies to all planned debris or only debris capable of causing a casualty. In any case, current practice includes the establishment of flight hazard areas sufficient for 97 percent probability of containment of debris capable of causing a casualty. Thus, the proposed requirements in Sec. 450.133 (b)(1), (c)(1), and (d)(1) would be revised to include language reflecting that the provision applies to debris capable of causing a casualty to any person located on land, sea, or air. Finally, proposed Sec. 450.133(e) would list flight hazard area application requirements. An applicant would need to submit a description of the methodology to be used in the flight hazard area analysis, including all assumptions and justifications for the assumptions, vulnerability models, analysis methods, and input data. This information would include the worst wind conditions under which flight might be attempted accounting for uncertainty in the wind conditions, the classes of waterborne vessels and vulnerability criteria employed, and the classes of aircraft and vulnerability criteria employed. Section 450.133(e)(2) would require an applicant to submit representative hazard area analysis outputs to include tabular data and graphs of the results of the flight hazard area analysis. Note that the proposal would require hazard area results to identify the regions of land, sea, and air considered hazardous, regardless of location or ownership.\203\ The proposed requirement to show contours of probability of impact (PI) and PC that are an order of magnitude lower than those used to define the flight hazard areas is necessary to demonstrate sufficient computational resolution and analysis fidelity for the results that are critical to public safety. Furthermore, the FAA Air Traffic Organization currently requires identification of regions of air where the PI exceeds 1 x 10-7 for all debris capable of causing a casualty to persons on an aircraft, in order to facilitate safe and efficient integration of launch and reentry operations into the NAS. Proposed Sec. 450.133(e)(3) would specifically provide that applicants must provide additional products if requested by the FAA to conduct an independent analysis. ---------------------------------------------------------------------------

\203\ However, as provided in proposed Sec. 450.161(c), an operator would only be required to publicize warnings for flight hazard areas that exclude any regions of land, sea, or air under the control of the vehicle or site operator or other entity by agreement. ---------------------------------------------------------------------------

12. Debris Risk Analysis The FAA proposes to streamline, clarify, and make consistent its regulations on debris risk analysis used to evaluate compliance with the public safety criteria in proposed Sec. 450.101. The proposal would require launch and reentry operators to conduct a debris risk analysis that demonstrates compliance with proposed Sec. 450.101 either prior to the day of the operation, accounting for all foreseeable conditions within the flight commit criteria, or during the countdown using the best available input data. A debris risk analysis determines the expected average number of casualties to the public, individually and collectively, due to inert and explosive debris hazards. This analysis includes an evaluation of risk to populations on land, including areas following passage through any gate in a flight safety limit boundary. The current FAA regulations require a debris risk analysis, but only part 417 provides any specificity about what constitutes a valid analysis including prescriptive requirements in section A417.25 of appendix A. Part 431 provides no requirements to clarify what constitutes a valid debris risk analysis. In practice though, RLV license applicants often abided by debris risk performance requirements set in part 417, such as the need to use trajectory time intervals sufficient to

[[Page 15391]]

produce smooth and continuous individual risk contours. Section A417.1 states that the appendix applies to the methods for performing analysis required by Sec. Sec. 417.107 and 417.225, and provides (1) an acceptable means of compliance, and (2) a standard and a measure of fidelity against which the FAA will measure any proposed alternative analysis approach. However, in some cases the 417 appendices are overly prescriptive and unduly burdensome. For example, section A417.25(c) requires an operator to file with the FAA a debris risk analysis report that includes all populated areas included in the debris risk analysis, which typically translates into many thousands of population centers for an orbital launch, as well as the values of probability of impact and expected casualty for each populated area. In other cases, the part 417 appendices mistakenly neglected to direct an applicant to account for important phenomena, such as the influence of uncertainties in atmospheric conditions on the propagation of debris from each predicted breakup location to impact. The FAA proposes to streamline, clarify, and make consistent its regulations regarding debris risk analyses to determine if public risks posed by a proposed launch or reentry can comply with the public safety criteria in proposed Sec. 450.101. The proposal would provide performance-based regulations regarding the level of fidelity required for key elements of a valid debris risk analysis, including analyses for the propagation of debris, public exposure and critical assets model, and casualty areas. The proposed debris risk analysis requirements in Sec. 450.135 would supplement the more generic requirements for flight safety methods proposed in Sec. 450.115. The proposal would also align FAA regulations with practices at the Federal launch ranges. Proposed Sec. 450.135(a) provides applicants an option to perform a debris risk analysis that demonstrates compliance with public safety criteria in Sec. 450.101, either prior to the day of the operation, by accounting for all foreseeable conditions within the flight commit criteria, or during the countdown using the best available input data. Thus, the proposal provides flexibility that was lacking in both parts 417 and 431. Proposed Sec. 450.135(b) would include performance-based requirements to clarify the phenomena the propagation-of-debris portion of the analysis must consider. The propagation of debris is a physics- based analysis that predicts where debris impacts are likely to occur in the case of a debris event while the vehicle is in flight, such as jettison of a vehicle stage or an explosion. As mentioned previously, section A417 provides some requirements regarding the sources of debris impact dispersions that must be accounted for, but in some cases that was either overly prescriptive or incomplete. A debris risk analysis must compute statistically-valid debris impact probability distributions using the input data produced by FSAs required in proposed Sec. Sec. 450.117 through 450.133. The propagation of debris from each predicted breakup location to impact would be required to account for all foreseeable forces that can influence any debris impact location, and all foreseeable sources of impact dispersion. At a minimum, the foreseeable sources of impact dispersion must include the uncertainties in atmospheric conditions, debris aerodynamic parameters, pre-breakup position and velocity, and breakup-imparted velocities.\204\ ---------------------------------------------------------------------------

\204\ The level of fidelity of the analysis would be subject to the requirements in proposed Sec. 450.101(g) which, as proposed, requires an operator's flight safety analysis method to use accurate data and scientific principles and be statistically valid. The method must produce results consistent with or more conservative than the results available from previous mishaps, tests, or other valid benchmarks, such as higher-fidelity methods. ---------------------------------------------------------------------------

Proposed Sec. 450.135(c) would provide performance-based regulations that specify features of a valid exposure model. An exposure model provides critical input data on the geographical location of people and critical assets at various times when the launch or reentry operation could occur. A debris risk analysis must use an exposure model that accounts for the distribution of people and critical assets. The exposure input data would be required to include the entire region where there is a significant probability of impact of hazardous debris, to characterize the distribution and vulnerability of people and critical assets both geographically and temporally, and to account for the distribution of people in various structure and vehicle types with a resolution consistent with the characteristic size of the impact probability distributions for relevant fragment groups. It would be required to have sufficient temporal and spatial resolution that a uniform distribution of people within each defined region can be treated as a single average set of characteristics without degrading the accuracy of any debris analysis output, and to use accurate source data from demographic sources, physical surveys, or other methods. As well, the exposure input data would be required to be regularly updated to account for recent land-use changes, population growth, migration, and construction. Finally, it would be required to account for uncertainty in the source data and modeling approach. In Sec. 450.135(d), the proposal would provide performance-based regulations that set forth the features of a valid casualty area and consequence analysis. The proposal would include a definition of casualty area in Sec. 401.5. ``Casualty area'' would mean the area surrounding each potential debris or vehicle impact point where serious injuries, or worse, can occur. A debris risk analysis would be required to model the casualty area and compute the predicted consequences of each reasonably foreseeable vehicle response mode in terms of conditional expected casualties. The casualty area and consequence analysis would be required to account for all relevant debris fragment characteristics and the characteristics of a representative person exposed to any potential debris hazard; any direct impacts of debris fragments, intact impact, or indirect impact effects; and vulnerability of people and critical assets to debris impacts. The vulnerability of people and critical assets to debris impacts would be required to account for the effects of buildings, ground vehicles, waterborne vessel, and aircraft upon the vulnerability of any occupants; for all hazard sources, such as the potential for any toxic or explosive energy releases; and for indirect or secondary effects such as bounce, splatter, skip, slide or ricochet, including accounting for terrain. It would also be required to account for the effect of wind on debris impact vector and toxic releases, and for impact speed and angle (also accounting for motion of vehicles). Finally, it would be required to account for uncertainty in fragment impact parameters, and uncertainty in modeling methodology. These broad performance-based items would replace the unduly narrow and prescriptive requirements in appendix A which would give operators more flexibility in demonstrating that public risk criteria have been met. In order to provide adequate protection from public safety risks such as the risk of casualties, it is important that analyses used to protect public safety account for all known influences on the vulnerability of people and critical assets. At the same time, the proposal recognizes in Sec. 450.101(g) that a valid method must produce results consistent with or more conservative than the results available from previous mishaps, tests, or other valid

[[Page 15392]]

benchmarks. Hence, the proposal would not require a vulnerability model to account explicitly for each known influence on the empirical results per se, but the proposal would require that a valid vulnerability model produce results that are either consistent with the standard in proposed Sec. 450.101(g). Proposed Sec. 450.135(e) would list application requirements, which are designed to be more balanced and less prescriptive and ambiguous than current requirements in appendix A to part 417, section A417. The proposal would require an application to describe the methods used to compute debris impact distributions, population exposure data, atmospheric data, as well as how the operator proposes to account for the conditions immediately prior to enabling the launch or reentry flight, per Sec. 450.135(e)(1) through (5). Proposed Sec. 450.135(e)(6) and (7) would require an applicant to submit sample debris risk analysis outputs, including the effective unsheltered casualty area for all fragment classes, assuming a representative impact vector; and the effective casualty area for all fragments classes for a representative type of building, ground vehicle, waterborne vessel, and aircraft, assuming a representative impact vector. This is not a new requirement because the effective casualty area was always necessary for computing the EC. The proposal would define effective casualty area in Sec. 401.5 as the aggregate casualty area of each piece of debris created by a vehicle failure at a particular point on its trajectory. The effective casualty area for each piece of debris is a modeling construct in which the area within which 100 percent of the population are assumed to be a casualty, and outside of which 100 percent of the population are assumed not to be a casualty. In proposed Sec. 450.135(e)(8), an applicant would be required to submit sample collective and individual outputs under representative conditions and the worst foreseeable conditions, including the total collective casualty expectation for the proposed operation; a list of the collective risk contribution for at least the top ten population centers and all centers with collective risk exceeding 1 percent of the collective risk criterion in proposed Sec. 450.101; a list of the maximum individual PC for the top ten population centers and all centers that exceed 10 percent of the individual risk criterion in proposed Sec. 450.101. The applicant would also be required to submit a list of the probability of loss of functionality of any critical asset that exceeds 1 percent of the critical asset criterion in proposed Sec. 450.101. Proposed Sec. 450.135(e)(9) would require an operator to submit a list of the conditional collective casualty expectation for each vehicle response mode for each one-second interval of flight under representative conditions and the worst foreseeable conditions. Finally, in all FSAs, the applicant must also submit additional products that allow an independent analysis, if requested by the FAA, in order to assure that the public risk criteria are satisfied. 13. Far-field Overpressure Blast Effects The FAA proposes to consolidate its regulations on far-field overpressure blast effects analyses in proposed Sec. 450.137 (Far- Field Overpressure Blast Effect Analysis), used to demonstrate compliance with the public safety criteria in proposed Sec. 450.101. This analysis looks at the potential public hazard from broken windows as a result of impacting explosive debris, including impact of an intact launch vehicle. The near-field effects of explosions are covered under debris risk analysis, where meteorological conditions do not significantly influence the attenuation of overpressure. However, the FAA would require a far-field blast effect analysis for peak incident overpressures below 1 pound per square inch (psi,) the point where meteorological conditions can significantly influence the attenuation of explosive overpressures. A launch and reentry operator would be required to conduct a far-field overpressure blast effects analysis (also known as distance focusing overpressure, or DFO) that demonstrates compliance with public safety criteria in proposed Sec. 450.101. An operator would need to complete the analysis either prior to the day of the operation accounting for all foreseeable conditions within the flight commit criteria or during the countdown using the best available input data. An applicant would be required to describe the critical input data, such as the meteorological measurements, and develop flight commit criteria to include any hazard controls derived from this FSA in accordance with proposed Sec. 450.165(b)(6). Impacting explosive materials, both liquid and solid, have the potential to explode. Given the appropriate combination of atmospheric pressure and temperature gradients, the impact explosion can produce distant focus overpressure at significant distance from the original blast point. Overpressures from as low as 0.1 psi may cause windows to break. However, other forms of overpressure, such as multiple pulses, may also prove hazardous depending on the size and thickness of windows and the number of windowpanes. Moreover, levels of overpressure will change depending on distance, atmospherics, and a vehicle's explosive yield. Multiple historical events involving large explosions, including rocket failures, have shown that under unfavorable atmospheric conditions, a shock wave may focus to produce significant peak overpressures at communities beyond the boundaries of the launch site, potentially causing window breakage and injuries. In light of the historical evidence of blast damage due to overpressure focusing, and building on the legacy of U.S. agency efforts to protect against the potential public risks associated with rocket explosions, the FAA adopted regulations to protect the public from the DFO phenomena in Sec. 417.229 (Far-field overpressure blast effect analysis) and appendix A to part 417 (section A417.29.) In Sec. 417.229, the FAA requires an FSA to establish flight commit criteria that protect the public from any hazard associated with DFO effects and demonstrate compliance with the public risk criterion. Section 417.229(b) currently lists appropriate constraints on the analysis and section A417.29 provides an acceptable means of compliance. Section A417.29 includes hazard controls based on ANSI S2.20-183 Standard,\205\ as well as a standard and a measure of fidelity used to assess any proposed alternative analytic approach. Section A417.29 also lists the products of a valid DFO analysis. ---------------------------------------------------------------------------

\205\ ANSI S2.20-1983, Estimating Air Blast Characteristics for Single Point Explosions in Air, with a Guide to Evaluation of Atmospheric Propagation and Effects, Acoustical Society of America, New York (1983). ---------------------------------------------------------------------------

However, current regulations lack clarity on when a day-of-launch DFO analysis is necessary. Specifically, section A417.29(c) requires that an operator conduct a risk analysis that accounts for ``current meteorological conditions,'' unless the operator complies with the prescriptive requirements in Sec. 417.229(b) that include the extremely conservative method prescribed by the ANSI S2.20-183 Standard. These requirements have led to situations where an operator was technically required to perform a day-of-launch risk analysis to protect against the DFO hazard, when in fact the public risks due to the DFO phenomena were insignificant based on every weather condition measured over a period of many years. Part 431 does not explicitly address the potential public hazard posed by

[[Page 15393]]

DFO. However, since 2016, Sec. 431.35(b)(1)(i) has required an applicant to demonstrate that the total collective risk does not exceed 1 x 10-\4\ EC, where the total risk consists of risk posed by impacting inert and explosive debris, toxic release, and far-field blast overpressure. Because the RLVs licensed to date under part 431 have relatively low potential explosive yields (compared to large ELVs), some part 431 license applicants were able to perform hazard analyses based on the extremely conservative method prescribed by the ANSI S2.20-183 Standard to demonstrate that the public risks due to the DFO phenomena were insignificant. The FAA proposes to streamline and clarify its regulations on DFO analyses. Whereas part 417 regulations and relevant appendices contain prescriptive methodology requirements in Appendix A, the proposal would distill these sections into performance requirements applicable to both launch and reentry flight operations. Proposed Sec. 450.137(a) would provide applicants an option to perform a DFO risk analysis that demonstrates compliance with public safety criteria in proposed Sec. 450.101, either prior to the day of the operation, by accounting for all foreseeable conditions within the flight commit criteria, or during the countdown using the best available input data. If an operator could satisfy Sec. 450.137(a)(1), then it would not be required to satisfy Sec. 450.137(a)(2). There are at least two different screening analyses that would demonstrate compliance with Sec. 450.137(a)(1). Method one would be a very simple deterministic window breakage screening analysis. Method two would be a simplified risk-based screening analysis. If either screening analysis indicates no potential hazards or insignificant risks, with or without mitigations, then an operator would not be required to comply with Sec. 450.137(a)(2). Conversely, an operator would be required to satisfy proposed Sec. 450.137(a)(2) if it could not demonstrate compliance with Sec. 450.137(a)(1). Thus, the proposal would provide clarity regarding how to determine if a day-of-operations risk analysis is necessary, and flexibility to establish flight commit criteria to limit the contribution of DFO public risks based on analysis done prior to the day of the operation. This clarity and flexibility were lacking in both parts 417 and 431. Proposed Sec. 450.137(b) would set required performance outcomes and the specific factors that a DFO FSA must consider. Substantively, Sec. 450.137(b) would contain the same requirements as those currently in Sec. 417.229(b). Note that the level of fidelity of the DFO analysis would be subject to the requirements in proposed Sec. 450.101(g), so that the analysis methods used must produce results consistent with, or more conservative than, the results available from valid benchmarks. Proposed Sec. 450.137(c) would clarify the materials an operator must submit with its license application, which are generally consistent with those currently required to comply with part 417. This paragraph would clarify the level of fidelity required for the products of a DFO analysis by specifying the key input data and critical model elements that an application would be required to describe. The proposal would require an application to include: (1) A description of the population centers, terrain, building types, and window characteristics used as input to the far-field overpressure analysis; (2) a description of the methods used to compute the foreseeable explosive yield probability pairs, and the complete set of yield- probability pairs, used as input to the far-field overpressure analysis; (3) a description of the methods used to compute peak incident overpressures as a function of distance from the explosion and prevailing meteorological conditions, including sample calculations for a representative range of the foreseeable meteorological conditions, yields, and population center locations; (4) a description of the methods used to compute the probability of window breakage, including tabular data and graphs for the probability of breakage as a function of the peak incident overpressure for a representative range of window types, building types, and yields accounted for; (5) a description of the methods used to compute the PC for a representative individual, including tabular data and graphs for the PC, as a function of location relative to the window and the peak incident overpressure for a representative range of window types, building types, and yields accounted for; (6) tabular data and graphs showing the hypothetical location of any member of the public that could be exposed to a PC of 1 x 10-\5\ or greater for neighboring operations personnel, and 1 x 10-\6\ or greater for other members of the public, given foreseeable meteorological conditions, yields, and population exposures; (7) the maximum expected casualties that could result from far-field overpressure hazards greater given foreseeable meteorological conditions, yields, and population exposures; and (8) a description of the meteorological measurements used as input to any real-time far-field overpressure analysis. It would also require the submission of any additional products that allow an independent analysis, as requested by the Administrator. 14. Toxic Hazards for Flight The FAA proposes to replace current Sec. 417.227 and appendix I to part 417 with the following two performance-based regulations: Sec. 450.139 for toxic hazard analyses for flight operations and Sec. 450.187 for toxic hazards mitigation for ground operations. Currently, the requirements for a toxic release hazard analysis are specified in Sec. 417.227. Section 417.277 requires that an FSA establish flight commit criteria that protect the public from any hazard associated with toxic release and demonstrate compliance with the public risk criteria of Sec. 417.107(b). This analysis must account for any toxic release that will occur during the proposed flight of a launch vehicle or that would occur in the event of a flight mishap, and for all members of the public that may be exposed to toxic release. Additionally, Sec. 417.405 sets forth the requirements for a ground safety analysis, and, although toxic release is not explicitly enumerated, a launch operator must identify each potential hazard including the sudden release of a hazardous material. Appendix I to part 417 provides methodologies for performing toxic release hazard analysis for the flight of a launch vehicle and for launch processing at a launch site in the U.S. as required by Sec. 417.407(f). Similarly, Sec. 431.35 requires that for a reusable launch vehicle mission, an applicant must demonstrate that the proposed mission does not exceed the acceptable risk defined in Sec. 417.107(b)(1) that includes the risk associated with toxic release. Further, Sec. 431.35(c) requires that an applicant employ a system safety process to identify the hazards and assess the risks to public health and safety of property associated with the mission. Although parts 431 and 435 have the same risk criteria for toxic release as are contained in part 417, unlike part 417, they have no explicit requirements for establishing toxic thresholds. Instead, toxic hazards are addressed as part of the systems safety process. The lack of definitive requirements in parts 431 and 435 has created a lack of clarity as to the requirements for toxic release hazard analysis during the system safety process. The current toxic hazard requirements have a number of shortcomings. The

[[Page 15394]]

requirements of Sec. 417.227 are not sufficiently definitive for an operator to establish the toxic concentration and exposure duration threshold for a toxic propellant, to evaluate toxic hazards for flight or for ground operations, to determine a toxic hazard area in the event of a release during flight or from a ground operations mishap, or to require toxic containment or evacuation of the public from a toxic hazard area. Conversely, the existing appendix I to part 417 is overly prescriptive in defining permissible values for assumptions and data inputs to analyses but, as discussed later, lacks important items. In many instances, appendix I requires specific methods, formulas, acceptable sources, specific conditions, and assumptions. However, often these are not the only ways in which the requirements or required demonstrations can be made. There are numerous examples of the prescriptive nature of appendix I to part 417. For example, section I417.3(c)(1) identifies only three agencies of the U.S. Government, namely, the Environmental Protection Agency, the Federal Emergency Management Agency, and the Department of Transportation, that the launch operator is permitted to use as sources of toxicant levels of concern (LOC). There are no common standards in toxicological dose-response data. The data bases of concentration thresholds are different from agency to agency. Specific toxic chemicals that are released may not be included in some or many lists, and some databases account for exposure durations where others do not. Additionally, some databases account for differences in the age and vulnerability of populations exposed, while others do not. Furthermore, some databases account for differences in the severity of physiological responses to exposure, when others do not. Therefore, excluding available dose-response databases limits the capability of the operator to select the most appropriate LOC. Other U.S Government agencies that have established airborne toxic concentration thresholds of exposure, including the National Research Council (NRC), the U.S. Occupational Safety and Health Administration (OSHA), the National Institute for Occupational Safety and Health (NIOSH), the National Oceanic and Atmospheric Administration (NOAA), the American Conference of Government Industrial Hygienists (ACGIH), the U.S. Department of Defense, the National Institutes of Health (NIH), the U.S. National Institute of Medicine, and the U.S. National Library of Medicine. Other prescriptive examples in Appendix I include section I417.3(c)(3) which requires the launch operator to use only one formulation to determine the toxic concentration threshold for mixtures of two or more toxicants, and section I417.5(c)(2), which prescribes a set of single-valued worst-case conditions that a launch operator must apply in an analysis of toxic hazard conditions for uncommon or unique propellants. Other sections of the appendix mandate specific assumptions.\206\ ---------------------------------------------------------------------------

\206\ For example, section I417.7(e)(2), the worst-case release scenario for toxic liquids, requires an assumption that liquid spreads to one centimeter deep, and that the volatilization rate must account for the highest daily maximum temperature occurring the past 3 years precluding more severe or more realistic worst-case conditions, such as assuming the liquid spreads to a lesser depth, exposing a greater surface area for evaporation. This may not be conservative enough to provide acceptable public safety in some cases. ---------------------------------------------------------------------------

In addition to being overly prescriptive, Appendix I also contains inaccuracies and out of date information. For example, section I417.7(b) (Process hazards analysis) provides that an analysis that complies with 29 CFR 1910.119(e) satisfies section I417.7(b)(1) and (2). However, the specific requirements of 29 CFR 1910.119(e) are not completely congruent with the specific requirements of section I417.7(b)(1) and (2). In particular, the following requirements of section I417.7(b)(2) do not have counterparts in Sec. 1910.119(e): location of the source of the release; each opportunity for equipment malfunction or human error that can cause an accidental release; and each safeguard used or needed to control each hazard or prevent equipment malfunctions or human error. Thus, if an operator chooses to satisfy Sec. 1910.119(e), important parts of section I417.7(b)(2) may not be addressed, such as the location of the source of the release which is needed to determine the toxic hazard area necessary to achieve toxic containment. The tables in appendix I are also problematic and in many cases omit important information. For example, Table I417-1, Commonly Used Non-Toxic Propellants, contains only three propellants, designated as commonly used non-toxic propellants. However, this list leaves other non-toxic liquid propellants such as liquid methane or liquefied natural gas without an explicit exemption from performing a toxic release hazard analysis. The FAA proposes to consolidate the requirements for toxic release analysis for the launch of an ELV currently contained in parts 415 and 417, the launch and reentry of an RLV in part 431, and the launch of a reentry vehicle other than a reusable launch vehicle in part 435. Specifically, the FAA proposes to replace current Sec. 417.227 and appendix I to part 417, with two performance-based regulations-- proposed Sec. Sec. 450.139 and 450.187. The proposed requirements would apply to all launches and reentries, and would provide more definitive application requirements for the toxic release hazard analysis. Both proposed Sec. Sec. 450.139 and 450.187 would apply to launch and reentry vehicles, including all components and payloads that have toxic propellants or other toxic chemicals, making it explicitly clear that reentry operations require a toxic hazard release analysis where the requirement was not previously explicit in parts 431 and 435. The FAA decided to split the toxic release analysis regulations into two sections, one for flight and the other for ground operations, because ground operations and flight operations have different criteria available to establish an acceptable level of public safety. Specifically, the FAA proposes to apply a quantitative public risk acceptability criteria for flight consistent with the risk criteria in Sec. 450.101 and to apply a qualitative hazard acceptability criterion for ground hazards that is consistent with the standard in Sec. 450.109(a)(3).\207\ ---------------------------------------------------------------------------

\207\ Section 450.109(a)(3) would require that the risk associated with each hazard meets the following criteria: (i) The likelihood of any hazardous condition that may cause death or serious injury to the public must be extremely remote and (ii) the likelihood of any hazardous condition that may cause major damage to public property or critical assets must be remote. ---------------------------------------------------------------------------

Proposed Sec. 450.139(b)(1) would require an operator to conduct a toxic release hazard analysis. Additionally, under paragraph (b)(2) an operator would be required to manage the risk of casualties that could arise from exposure to toxic release either through containing hazards in accordance with proposed Sec. 450.139(d) or performing a toxic risk assessment under proposed paragraph (e) that protects the public in compliance with proposed Sec. 450.101, including toxic release. Furthermore, under proposed Sec. 450.139(b)(3) an operator would be required to establish flight commit criteria based on the results of its toxic release hazard analysis, containment analysis, or toxic risk assessment for any necessary evacuation of the public from any toxic hazard area. Section 450.139(c) would contain the requirements for a toxic release hazard analysis, which are currently lacking in

[[Page 15395]]

Sec. 417.227. Specifically, under proposed Sec. 450.139(c) the toxic release hazard analysis would require an operator to account for any toxic releases that could occur during nominal or non-nominal launch or reentry for flight operation. Furthermore, an operator's toxic release hazard analysis would be required to include a worst-case release scenario analysis or a maximum-credible release scenario analysis for each process that involves a toxic propellant or other chemical; determine if toxic release can occur based on an evaluation of the chemical compositions and quantities of propellants, other chemicals, vehicle materials, and projected combustion products, and the possible toxic release scenarios; account for both normal combustion products and any unreacted propellants and phase change or molecular derivatives of released chemicals; and account for any operational constraints and emergency procedures that provide protection from toxic release. While the proposed Sec. 450.139(c) would contain more definitive requirements than current regulations, it would also provide the operator more flexibility in the analysis because unlike the current regulations it would not require an operator to make specific assumptions when performing a worst-case release scenario analysis to determine worst-case released quantities of toxic propellants, toxic liquids, or toxic gases from ground operations. Proposed Sec. 450.139(b)(2) would require an operator to manage the risk of casualties arising from toxic release either by containing the hazards in accordance with paragraph (d) or by performing a toxic risk assessment in accordance with paragraph (e) that protects the public in compliance with the risk criteria of Sec. 450.101. If an operator chose toxic containment to comply with proposed Sec. 450.139(b)(2), the operator would be required to manage the risk of casualties by either (1) evacuating, or being prepared to evacuate, the public from a toxic hazard area, where an average member of the public would be exposed to greater than one percent conditional individual PC in the case of worst-case release or maximum credible release scenario, or (2) by employing meteorological constraints to limit a launch operation to times when the prevailing winds would transport a toxic release away from populated areas otherwise at risk. The conditional individual PC would be computed assuming that (1) a maximum credible release event occurs, and (2) average members of the public are present along the boundary of the toxic hazard area. If an operator chose to comply with proposed Sec. 450.139(b)(2) by conducting a toxic risk assessment that protects the public in compliance with proposed Sec. 450.101, in accordance with Sec. 450.139(e), the toxic risk assessment would require the operator to account for airborne concentration and duration thresholds of toxic propellants or other chemicals. For any toxic propellant, other chemicals, or combustion product, an operator would be required to use airborne toxic concentration and duration thresholds identified in a means of compliance accepted by the Administrator. Currently, the thresholds set by the Acute Exposure Guideline Level 2 (AEGL-2), the Emergency Response Planning Guidelines Level 2 (ERPG-2), or the Short- term Public Emergency Guidance Level (SPEGL) \208\ would be accepted means of compliance for proposed Sec. 450.139(e)(1) (and Sec. 450.187(d)(1)). These are thresholds designed to anticipate casualty- causing health effects from exposure to certain airborne chemical concentrations. The FAA anticipates, as discussed earlier, that additional agencies' threshold values could satisfy the requirements and would identify any additional accepted thresholds. By requiring an operator to use airborne toxic concentration thresholds identified in a means of compliance accepted by the Administrator under proposed Sec. 450.35, the FAA anticipates that operators would be provided with some flexibility to utilize toxic concentration thresholds identified by agencies other than the three currently identified in appendix I to part 417 thereby enhancing the capability of the operator to select the most appropriate LOC for its operation. ---------------------------------------------------------------------------

\208\ AEGLs are used by EPA, the American Industrial Hygiene Association's ERPGs are used by NOAA, and the National Research Council's SPEGL is used by the DOD. ---------------------------------------------------------------------------

An operator also would be required under Sec. 450.139(e)(2) to account for physical phenomena (such as meteorological conditions and characterization of the terrain) expected to influence any toxic concentration and duration in the area surrounding the potential release site instead of prescribing a set of single-valued wind speed and atmospheric stability classes and dictating how an operator must derive the variance of the mean wind directions. Hence, under proposed Sec. 450.139(e)(2) the toxic assessment would likely be more appropriate for the actual situation. Proposed Sec. 450.139(e)(3) would require an operator to determine a toxic hazard area for the launch or reentry, surrounding the potential release site for each toxic propellant or other chemical based on the amount and toxicity of the propellant or other chemical, the exposure duration, and the meteorological conditions involved. Finally, under proposed Sec. 450.139(e)(4) and (5) the toxic assessment would be required to account for all members of the public that may be exposed to the toxic release, including all members of the public on land and on any waterborne vessels, populated offshore structures, and aircraft that are not operated in direct support of the launch or reentry, and for any risk mitigation measures applied in the risk assessment. In many respects, proposed Sec. Sec. 450.139 and 450.187 are nearly identical, and the rationale behind the revisions proposed in Sec. 450.139 would be the same for proposed Sec. 450.187. As discussed previously, proposed Sec. 450.187 would apply to any launch or reentry vehicle, including all vehicle components and payloads, that uses toxic propellants or other toxic chemicals. Like Sec. 450.139, Sec. 450.187(b) would require a toxic hazard analysis. Under the proposed rule an operator would be required to manage risk from a toxic release hazard or demonstrate compliance with proposed Sec. 450.109(a)(3) \209\ with a toxic risk assessment. The requirements for a toxic risk assessment under proposed Sec. 450.187(e) are substantially similar to those of proposed Sec. 450.139, except that ground operations use a qualitative acceptability criteria and flight operations can use quantitative risk criteria. FAA has not proposed quantitative criteria for ground operations because there are no commonly accepted criteria. ---------------------------------------------------------------------------

\209\ As discussed earlier, Sec. 450.109(a)(3) would require that the risk associated with each hazard meets the following criteria: (i) The likelihood of any hazardous condition that may cause death or serious injury to the public must be extremely remote and (ii) the likelihood of any hazardous condition that may cause major damage to public property or critical assets must be remote. ---------------------------------------------------------------------------

The proposed application requirements under Sec. 450.139(f) toxic hazards for flight and under Sec. 450.187(e) for ground operations would be similar. The FAA believes that the proposed approach will provide applicants with a clear understanding of what the FAA requires in order to avoid repeated requests for clarifications and additional information. Both would require the applicant to submit: (1) The identity of the toxic propellant, chemical, or toxic combustion products or derivatives in the possible toxic release; (2) its selected airborne toxic concentration and duration thresholds; (3) meteorological conditions for the atmospheric

[[Page 15396]]

transport, and buoyant cloud rise of any toxic release from its source to downwind receptor locations; (4) characterization of the terrain; (5) the identity of the toxic dispersion model used, and any other input data; (6) representative results of toxic dispersion modeling to predict concentrations and durations at selected downwind receptor locations; (7) a description of the failure modes and associated relative probabilities for potential toxic release scenarios used in the risk evaluation; (8) the methodology and representative results of the worst-case or maximum-credible quantity of any toxic release; (9) a demonstration that the public will not be exposed to airborne concentrations above the toxic concentration and duration thresholds; (10) the population density in receptor locations that are identified by toxic dispersion modeling as toxic hazard areas; and (11) a description of any risk mitigations applied in the toxic risk assessment; and (12) the identity of the population database used. Like other risk analyses, the FAA may request additional products that allow the FAA to conduct an independent analysis. 15. Wind Weighting for the Flight of an Unguided Suborbital Launch Vehicle The FAA proposes to consolidate three current part 417 provisions expressly regulating unguided suborbital launch vehicle operations into Sec. 450.141. The proposed rule would retain the performance requirements and remove the prescriptive provisions in Sec. Sec. 417.125 and 417.233. The FAA also proposes to incorporate the overarching safety performance requirements in appendix C to part 417 related to wind weighting analysis products. This proposal applies specifically to the flight of unguided suborbital launch vehicles using wind weighting to meet the public safety criteria of proposed Sec. 450.101. An unguided suborbital launch vehicle is a suborbital rocket that does not contain active guidance or a directional control system. Unlike the launch of a guided launch vehicle, an unguided suborbital launch vehicle may safely fly by adjusting the launcher azimuth and elevation (aiming the rocket) shortly before launch to correct for the effects of wind conditions at the time of flight. This process limits impact locations to those that minimize public exposure. The FAA refers to this safety process as ``wind weighting,'' which involves unique organizational and operational safety requirements. Section 417.125 provides the broad requirements for launching an unguided suborbital launch vehicle. Specifically, it lays out provisions for a flight safety system, a wind weighting safety system, public risk criteria, stability, tracking, and post launch review. Section 417.125(b) requires an applicant to use an FSS if the vehicle can reach a populated area and the applicant does not use an effective wind weighting system. Section 417.125(c) sets requirements for a wind weighting system if that system is used in place of an FSS. It provides that the vehicle must not contain a guidance or directional control system. It also requires the launcher azimuth and elevation setting to be wind weighted to correct for the effects of wind conditions at the time of flight in compliance with Sec. 417.233's FSA requirements, and requires specific nominal launcher elevation angle for proven (85[deg], and 86[deg] with wind correction) and unproven (80[deg], and 84[deg] with wind correction) unguided suborbital launch vehicles. These prescriptive launch elevation angles are used so that the vehicle does not fly uprange. In other words, the rocket should not be angled so vertically that winds could force the rocket uprange instead of the intended downrange direction. Section 417.125(d) expressly requires unguided suborbital launch vehicles to fly in accordance with the public risk criteria required for all launch vehicles under part 417. In addition, the current rule has stability, tracking, and post- launch review requirements that are specific to unguided suborbital launch vehicles. Section Sec. 417.125(e) requires specific stability requirements measured in calibers to ensure that the unguided suborbital launch vehicle is stable throughout flight. The tracking requirements in Sec. 417.125(f) require that a launch operator track impact locations after launch to verify that the preflight wind weighting analysis was accurate. Section 417.125(g) is related to post- launch review and states that the launch operator must provide these impact locations, a comparison of actual to predicted nominal performance, and investigation results of any launch anomaly. Current Sec. 417.233 describes the FSA requirements particular to unguided suborbital launch vehicles with wind weighting systems. The analyses must establish flight commit criteria, wind constraints under which launch may occur, and launcher azimuth and elevation settings that correct for wind effects on the launch vehicle. This last requirement is known as the wind weighting analysis. Appendix C to part 417 contains flight safety methodologies and products for an unguided suborbital launch vehicle flown with a wind weighting safety system. These includes methodologies and products for a trajectory analysis, a wind weighting analysis, a debris analysis, a risk analysis, and a collision avoidance analysis. Section C417.3 requires the launch operator perform a six-degrees-of-freedom trajectory simulation in order to determine a nominal trajectory, impact point, and potential three-sigma dispersions about the nominal impact point. Section C417.5 is related to wind weighting and describes the methodology an applicant must use to measure winds and incorporate them into the trajectory simulation in order to determine launch elevation angle and azimuth settings. The debris (section C417.7) and risk (section C417.9) analyses describe methodologies and analysis products applicable to all launch vehicles for calculating EC. The parts of appendix C that are covered elsewhere in the proposed rule because they are applicable to all vehicles have not been transferred to proposed Sec. 450.141. This includes the debris, risk, and collision avoidance analyses. Proposed Sec. 450.141 would consolidate the requirements of Sec. Sec. 417.125 and 417.233 and appendix C, but would not carry over the detailed methodological and prescriptive requirements. Proposed Sec. 450.141(a) would explain that the section applies to the flight of an unguided suborbital launch vehicle using a wind weighting safety system to meet the public safety criteria of proposed Sec. 450.101. The FAA proposes to define a wind weighting safety system as equipment, procedures, analysis, and personnel functions used to determine the launcher elevation and azimuth setting that correct for wind effects that an unguided suborbital launch vehicle will experience during flight. The FAA proposes the wind weighting safety system be a means to satisfy the safety requirements in proposed Sec. 450.101. Proposed Sec. 450.141(b) would set the requirements for the wind weighting safety system. It would require that the launcher azimuth and elevation angle settings (1) be wind weighted to correct for the effects of wind conditions at the time of flight to provide a safe impact location, and (2) ensure the rocket will not fly in an unintended direction given wind uncertainties. This section would replace current Sec. 417.125(b), which requires a flight safety system unless the vehicle uses wind weighting or does not have sufficient energy to reach a populated area. Rather than the blanket FSS requirement in current Sec. 417.125(b), the consequence analysis in proposed Sec. 450.135(d) would determine the need

[[Page 15397]]

for an FSS. This section also eliminates the requirement in Sec. 417.125(c)(3) regarding specific nominal launcher elevation angle for proven (85[deg] and 86[deg] with wind correction) and unproven (80[deg] and 84[deg] with wind correction) vehicles to prevent the vehicle from flying uprange. Rather than requiring specific launcher elevation angles to prevent a vehicle from flying uprange, the FAA would require an operator to determine what angles would ensure the rocket not fly in unintended direction given wind uncertainties. This flexibility would allow a licensee to determine the best angle to both maximize mission objectives given the particularities of their operation while simultaneously ensuring safety. Proposed Sec. 450.141(c) would contain FSA performance requirements that apply only to the launch of an unguided suborbital launch vehicle flown with a wind weighting safety system. It is necessary to establish the flight commit criteria and other flight safety rules to control risk to the public and satisfies the public safety criteria in proposed Sec. 450.101. Proposed Sec. 450.141(c) would require an operator to establish any wind constraints under which launch could occur, and conduct a wind weighting analysis that establishes the launcher azimuth and elevation settings. Proposed Sec. 450.141(c) is, in essence, the same as Sec. 417.233. Proposed Sec. 450.141(d) would require an unguided suborbital launch vehicle to remain stable in all configurations throughout each stage of powered flight. This performance outcome would eliminate the need for the specific prescriptive stability requirements of current Sec. 417.125(e), which requires a suborbital launch vehicle be stable in flexible body to 1.5 calibers and rigid body to 2.0 calibers throughout each stage of powered flight. Finally, proposed Sec. 450.141(e) would establish the agency's application requirements specific to unguided suborbital launch vehicles. The FAA would require a description of wind weighting analysis methods, description of wind weighting system and equipment, and a sample wind weighting analysis, all derived from part 417, appendix C, section C417.5(d). The remainder of appendix C was not included in the proposal because these are all prescriptive methodologies, or are requirements applying to all launch vehicles covered in other sections of the proposal. For instance, the Trajectory Analysis of section C417.3 would be covered by proposed Sec. Sec. 450.117 and 450.119. Except for section C417.5(d) as described earlier, section C417.5 was not included in the proposal since this is a prescriptive methodology. The methodologies for debris analysis from section C417.7 are not in the proposal and the debris analysis proposal would now be in proposed Sec. 450.121. Similarly, section C417.9 would be covered by proposed Sec. 450.135 without the prescribed methodologies. Lastly, the collision avoidance section of the appendix, section C417.11 would be covered by proposed Sec. 450.169.

B. Software

As discussed earlier, the FAA proposes software safety requirements in Sec. 450.111. The risk mitigation measures that result from this rule are meant to be minimums, and software development processes tend to benefit from consistency across projects, so an applicant may apply the requirements from its most critical software to all of its software, but the FAA does not require that an applicant do so. Software can contribute to accidents or losses in several ways. Software may contain errors that, in certain system conditions, cause unintended behaviors or prevent intended behaviors. Software may also perform actions that while correct and intended in isolation, cause hazards when interacting with other components or the system as a whole. Software may provide accurate information to an operator in a manner that confuses the operator, leading to a software-human interaction error. Software safety therefore typically requires separate analyses of the software, software and computing system interaction, and the integration of software, hardware, and humans into the entire system. Software becomes safety-critical when the applicant uses its outputs in safety decisions. The development, validation, and evaluation of safety-critical software requires a level of rigor commensurate with the severity of the potential hazards and the software's degree of control over those hazards. Reliance on software differs among operators. For example, some launch systems employ Autonomous Flight Safety Systems (AFSS) that rely on rigorously- developed and thoroughly-tested software to make safety decisions to protect the public without human intervention. Other systems require human intervention to make safety decisions, such as when a pilot or ground transmitter operator must make decisions for launch systems. Current FAA licensing regulations segregate software safety requirements by type of vehicle (ELV, RLV, or reentry vehicle) in three separate sections.\210\ Current software safety regulations in parts 415, 417, and 431 are flexible. With this flexibility comes uncertainty. For example, Sec. 415.123(b) requires that a launch operator provide all plans for software development, the results of software hazard analyses, and plans and results of software validation and verification, but does not give guidance on the minimum-acceptable levels of rigor for those products or guidance on their contents. The FAA and the operator must determine the appropriate level of rigor, scope, and content of each plan and result for each operation. This process can be labor-intensive, requiring multiple meetings over a period of weeks or months. ---------------------------------------------------------------------------

\210\ Part 415 covers launch license application procedures for ELVs; part 417 addresses launch safety requirements for ELVs, and part 431 sets launch license and safety requirements for RLVs. ---------------------------------------------------------------------------

Also, Sec. 417.123(c), applicable to ELVs, requires that a launch operator conduct computing system and software hazard analyses for the integrated system. This requirement does not specify the requisite forms of the analyses, the scope and contents of the analyses, or the application data required to demonstrate compliance with the requirement. The FAA and the applicant must negotiate the specifics for each of those items for every application. Similarly, Sec. 417.123(d) requires that a launch operator develop and implement computing system and software validation and verification plans, but is silent regarding the contents of the plans. This again requires that the FAA and the applicant discuss, often at length, the software test plans for every operation. Unlike Sec. Sec. 415.123 and 417.123, Sec. 431.35 does not contain any explicit references to software safety. However, in practice, the FAA has set software safety requirements under the current system safety process requirements in Sec. 431.35(c). Pursuant to Sec. 431.35(c), the FAA has required applicants satisfy Sec. 417.123 or demonstrate an equivalent level of safety, in order to meet Sec. 431.35 for software safety. This lack of detail forces the FAA and applicant to work collaboratively to develop the system safety process criteria on a case-by-case basis. Operators have offered consistent feedback on the FAA's software safety requirements. Applicants frequently asked whether Sec. Sec. 417.123(b) and 431.35(c)'s verification and validation plan requirement included a requirement for independent verification and validation. Independent verification and validation is a common

[[Page 15398]]

and effective method of mitigating software hazards for high- criticality software, one for which there is no known substitute. Thus, although not explicitly stated in the regulations, the FAA has required independent verification and validation as part of the verification and validation requirements in Sec. Sec. 417.123(b) and 431.35(c). The FAA considers software testers independent when the test organization is independent of the development organization up to the senior-executive level. Generally, an in-house software testing team can be sufficiently independent to perform a credible independent verification and validation function when rigorously insulated from software development authorities and incentives. Still more independence may be required for highly safety-critical autonomous software, such as an independent contractor, depending on the risks and the other mitigation measures implemented by the applicant. The FAA has required at least independence up to the senior-management level and expected an applicant to show evidence of this independence in its application. Applicants have also often asked whether the FAA requires submissions of software code. The FAA has not historically required executable code submissions and does not plan to do so in this proposal. Instead, the FAA's requirements focus on the software development and testing processes, combined with analysis of the software's use in the context of the system as a whole. Firstly, the FAA seeks to understand the software development processes used for the design, production, verification, and qualification of software to determine the code quality. Proposed Sec. 450.111(a), (b), and (c) would provide these general software process requirements that are independent of the degree of control exercised by a given software component. Secondly, the FAA must understand the impacts of the software on the system as a whole. It is important to understand design risks, which are those risks inherent to the software design and architecture; and also process risks, which arise from the software development processes and standards of the applicant. The FAA uses these two components, process and implementation, to evaluate software components and processes for the appropriate level of rigor. The FAA must also understand the relationship between software actions and system risks to set the appropriate level of rigor. Establishing the required level of rigor and understanding its implementation form the basis of software safety determinations. Configuration management, including version control, then ensures the operator uses the intended processes and functionality for the correct software in the system's operation. Applicants have often sought help in determining whether software is safety-critical in accordance with Sec. Sec. 417.123(b) and 415.123(a). For instance, operators sometimes use software to generate information used in safety-critical decisions, such as initiating a deorbit burn. The FAA has consistently found software that generates information used in safety-critical decisions to be safety-critical software, albeit with a low degree of control over the system. Applicants have also asked whether the FAA requires redundant processing such as running a second instance of a software component on a second independent computer, and if so, the required level of risk. The FAA has made such determinations based on the hazards involved and on the software's degree of control over those hazards. The FAA has chosen not to prescribe a requirement for redundant processing because such a requirement is best derived from the applicant's individual approach to hazard mitigation at the system level. Redundant copies of identical software contain identical software faults, so redundant processing is best described as a mitigation for hardware failures. The proposal would allow for software without redundant processing whenever processing redundancy is not necessary to achieve acceptable risk. For example, the FAA may not require redundant processing in fail-safe systems, low-criticality systems, or where hardware ensures software processing integrity by using hardware features such as watchdog timers or error-correcting memory. In light of the range of design strategies between commercial space operators, the FAA realized that a one-size-fits-all approach to software safety would not be practical. Instead, in proposed Sec. 450.111(d) through (g) the FAA would establish requirements for each safety category of software. The safety categories, commonly known in the software safety industry as ``levels of rigor'' or ``software criticality indexes,'' would range from autonomous software with catastrophic hazards to software with no safety impact. Applicants may rely upon Federal launch range standards to show compliance with the proposed rule, provided the standards meet the regulations. The FAA maintains awareness of the Federal launch range safety standards through the CSWG. The FAA currently incorporates the known and coordinated standards maintained by the Federal launch ranges into FAA licensing in order to avoid duplication of effort. The Federal launch ranges have an extensive launch safety history, and their standards meet or exceed the level of safety required by the FAA. The FAA intends to retain the ability to apply Federal launch range safety standards toward license evaluation and issuance. In developing this proposed rule, the FAA has tried to remain consistent with prevalent industry standards related to the ``level of rigor'' approach to software safety. Specifically, the FAA has used the level of rigor approaches applied by the Department of Defense and NASA to inform the FAA's proposed level of rigor approach to software safety regulation. The FAA proposes to use the Department of Defense's MIL-STD-882E concept of ``level of rigor'' to categorize software according to the amount of risk it presents to the operation and use its ``level of rigor tasks'' to derive appropriate regulatory requirements for each level of rigor. MIL-STD-882E uses a software hazard severity category with a software control category to assign level of rigor tasks to software. This method has proven successful in achieving an acceptable level of safety for space operations. The FAA also used RCC 319, Flight Termination Systems Commonality Standard, to develop the requirements for autonomous software in proposed Sec. 450.111(d). RCC 319-14 provides detailed software requirements for autonomous flight safety systems, which have been extensively reviewed by the space community. RCC 319-14 creates software categories that combine hazard severity and degree of control in a single step, and provides deep detail on the appropriate risk reduction tasks for each category. AFSPCMAN 91-712 (draft) is the source of RCC 319-14's software categories and risk reduction tasks. The FAA also reviewed NASA's Software Safety Standard (NASA-STD- 8719.13C), which provides standards applicable to defining the requirements for implementing a systematic approach to software safety. Like RCC 319-14, NASA-STD-8719.13C combines software hazard's severity with the software's degree of control to assign analysis and testing tasks. However, NASA expands its software control category definitions to include software autonomy, software complexity, time-criticality, and degree of hazard control. The FAA also considered NASA's Software Assurance Standard (NASA-STD-8739.8), which provides criticality, risk, resource investment, and financial impact categorizations and correlates

[[Page 15399]]

these to levels of software assurance effort. These two NASA documents provided the FAA with a wealth of potential software safety requirements and methods to determine the requirements that would be most appropriate for a variety of space systems. These documents also provided a checklist of key aspects of software projects that enable software safety. The FAA has drawn from these documents the minimum set of requirements that would enable space operators to protect the public, and the minimum set of data that would enable the FAA to verify that space operators will protect the public in the course of their innovations. Finally, the FAA reviewed the Air Force Space Command's draft 91- 712, Launch Safety Software and Computing System Requirements. The Air Force has successfully used 91-712 for military space projects and it is the source of many RCC 319-14 requirements. 91-712, and the standards discussed earlier, all prescribe increasing the effort devoted to software safety in proportion to the severity of the hazards that software can create and in proportion to the degree of control that software exercises over those hazards. The proposed software safety regulations would categorize software and computing functions into the following degrees of control as defined in proposed Sec. 450.111(d) through (g): Autonomous software, semi-autonomous software, redundant fault-tolerant software, influential software, and no safety impact. This proposal for software safety would address the causes of software faults and software failures. Software faults are design flaws in software that cause unintended behaviors or prevent intended behaviors. Software faults include errors in syntax, definitions, steps, or processes that can cause a program to produce an unintended or unanticipated result. The presence of software faults might not always result in an observable software failure that is evident to the user because it may appear to be behaving properly. A software failure, in contrast, is an unintended or undesirable event caused by, or unintentionally allowed by, one or more software faults. A software fault is a defect or vulnerability in software while a software failure results from the execution of faulty software.\211\ ---------------------------------------------------------------------------

\211\ An example of a software failure is the ``blue screen of death,'' which causes a computer to end all processing. An example of software fault is a fault in requirements for measurement units and a fault in test procedures. The Mars Climate Orbiter was lost as a result of these two faults when one function was written in English units while the rest were written in metric. ---------------------------------------------------------------------------

This proposal would address faults in software requirements by analytical means in proposed Sec. 450.111. Specifically, the proposal would require an applicant to describe the functions and features, including interfaces, of the software. The FAA has interpreted the need to describe software to include providing the software requirements for each safety-critical software component even though not explicitly required by Sec. 431.35 or Sec. 417.123. The proposal therefore codifies current practice. Software requirements are an excellent, even indispensable, means of understanding any software component's safety implications. Software requirements, both documented and implied, are the basis of the software design and constitute a key part of Sec. 417.123(a) through (e) requirement for software designs. The FAA proposes to clarify the necessity and scope of software requirements that would be required to be included in an application in proposed Sec. 450.111(h). Software requirements would need to be documented and analyzed whenever safety- critical software is present.\212\ Software requirements are frequently inherited from system requirements, and both must be internally and mutually consistent and valid for the resulting software to work safely. A system-level hazard analysis finds out what hazards software presents to the system. The software analyses can use the system-level analyses as initial assessments of software's criticality when starting software safety analyses. If software requirements are flawed, the software written to those software requirements will be flawed as well. This causal path, where software faults originate in software requirements, is the reason for the proposal's focus on identification, documentation, validation, and verification of software requirements. ---------------------------------------------------------------------------

\212\ Implied or undocumented software requirements are common sources of software faults. ---------------------------------------------------------------------------

This proposal addresses faults in implementation by requiring specific types of software verification and validation testing in proposed Sec. 450.111(d)(4), (e)(4), (f)(3), and (g)(2). This proposal would clarify the required types of software verification and validation testing that are required under current Sec. Sec. 417.123(d) and 415.123(b)(8).\213\ Verification and validation are standard aspects of a software development cycle and are used together to determine that software meets its intended purpose. In this context, verification refers to ensuring software meets the software requirements and design specifications. Validation ensures that the software achieves its intended purpose.\214\ While testing does not ensure the absence of software faults, it helps detect and therefore reduce their presence. ---------------------------------------------------------------------------

\213\ Examples of testing include unit testing to verify some of the smallest units of code, such as functions, and acceptance testing to validate high-level software requirements. \214\ Verification takes place while the software is under development while validation is performed after completing software development and implementation. ---------------------------------------------------------------------------

The proposal would address faults in configuration with explicit requirements to establish and verify software configuration management processes. Configuration management is the set of processes that ensure that the flight components, including software components, are the correct components with the appropriate development and test heritage. Faults in configuration management can lead to unsuitable or incompatible components in a system, resulting in an increased potential for unintended and unsafe system actions. Proposed Sec. 450.111(a) would require operators to document a process that identifies the risks to the public health and safety and the safety of property arising from computing systems and software. This is consistent with the Sec. 417.123(a) requirement for a description of the computing system and software system safety process. It adds no more requirements than part 415 because Sec. 415.123(b)(6) requires an applicant to describe the computing system and software system safety process as required by Sec. 417.123(a). Unlike Sec. 431.35(c), proposed Sec. 450.111(a) specifically mentions computing systems and software as items to be included in the system safety process. Proposed Sec. 450.111(b) would require an operator to identify all safety-critical functions associated with its computing systems and software. The 10 listed functions are a minimum set of items to include whenever they are present in a system, because they represent the most common safety-critical roles in which software can be employed. For example, software used to control or monitor safety-critical systems is capable of hazardous actions by definition. Similarly, software that accesses safety-critical data is safety-critical because it may alter safety-critical data or prevent other components from accessing safety- critical data at required times. The software safety process must then demonstrate that the software that accesses safety-critical data cannot

[[Page 15400]]

cause a hazard by doing so. These requirements are the same as in the current Sec. 417.123(b), with the addition of one new criterion for software that displays safety-critical information. Proposed Sec. 450.111 would retain the requirement of Sec. 417.123(b) for the identification of safety-critical functions. The proposal would add detail and clarity to this requirement, specifying that the identified functions must be accompanied by assessments of the criticality of each software function. This is normally done by assessing the consequences of a functional failure or error and assessing the degree of control that the software can exercise to implement the function. The proposal would retain the examples of software that may have safety-critical functions, with the expectation that the full list of safety-critical functions is not limited to the examples. It differs from Sec. 415.123(b), which describes the documents and materials that the applicant must provide, whereas proposed Sec. 450.111(b) would list the safety-critical computing system and software functions that must be identified and would not list the application requirements in the same section. The proposal would depart from Sec. 431.35(d)(3) by specifically requiring the applicant to identify all safety-critical functions associated with its computing systems and software instead of implicitly requiring the identification of safety-critical software as part of the process of identifying safety-critical systems. Proposed Sec. 450.111(c) would require the identification of safety-critical software functions by consequence and degree of control. It would elaborate on the requirements of Sec. Sec. 415.123(a) and 417.123(a), which require the identification and assessment of the software risks to public safety by specifying that the assessments must include the public safety consequences of each safety-critical software function and the degree of control that software exercises over the performance of that function. Proposed Sec. 450.111(c) would provide the classification for the applicants to use while the application requirements are contained in proposed Sec. 450.111(h). Requiring software degree of control would allow the FAA to request less information for software components with reduced or no influence on public safety. The proposal would differ from Sec. 431.35 by explicitly requiring identification of software hazards by function and specifying the documentation requirements related to computing systems and software in proposed Sec. 450.111(h). Even though this language is different from Sec. 431.35, this is not a new requirement. The requirements in the proposal vary based on the software degree of control and degree of hazard presented. The first and highest degree of control is autonomous software. Autonomous software would mean software that exercises autonomous control over safety-critical systems, subsystems, or components such that a control entity cannot detect or intervene to prevent a hazard that may impact public health and safety or the safety of property. It is any software that can act without an opportunity for meaningful human intervention. The FAA would impose the most stringent requirements for autonomous software with potential catastrophic public safety consequences. Proposed Sec. 450.111(d) would set forth five criteria specific to autonomous software. Under proposed Sec. 450.111(d)(1), the software component would be required to undergo full path coverage testing and any inaccessible code must be documented and addressed. Full path coverage testing is a systematic technique for ensuring that all routes through the code have been tested. Path coverage testing includes decision, statement, and entry and exit coverage. Proposed Sec. 450.111(d)(1) would retain and clarify the current requirements in Sec. 431.35(d). Full path coverage testing and documentation of inaccessible code would be required for autonomous components because the presence of inaccessible code segments presents a potential for the execution of untested instructions, which is obviously deleterious for an autonomous system that, by definition, depends on the correctness of its instructions for safe operation. Under proposed Sec. 450.111(d)(2), the software component's functions would be required to be tested on flight-like hardware. Testing would be required also to include nominal operation and fault responses for all functions. The proposal would retain and clarify the current requirements in Sec. Sec. 431.35(d) and 415.123(b)(8). Testing software components on flight-like hardware, including nominal operation and fault responses, is an industry standard for ensuring that the software interfaces with the hardware as designed. All autonomous safety-critical components require this testing. Under proposed Sec. 450.111(d)(3), an operator would be required to conduct hazard analyses of computing systems and software for the integrated system and for each autonomous, safety-critical software component. A software hazard analysis identifies those hazards associated with safety-critical computer system functions, assesses their risk, identifies methods for mitigating them, and specifies evidence of the implementation of those mitigation measures. This requirement is currently in Sec. Sec. 415.123(b)(7), 417.123(c), and 431.35(d)(4). All software components, regardless of degree of control, require this analysis for the integrated system. This analysis is also required for each autonomous, safety-critical software component. Hazard analyses provide the essential foundation for risk assessment and management of any system. This analysis is necessary throughout the lifecycle of the system, from development to disposal. As a system is modified during design, operation, and maintenance, changes to any part of the system can lead to unexpected consequences that may incur new hazards to public safety. It is important to consider risks that result from software and computing errors as a class or subsystem, as well as those resulting from the operation and interaction of software with all other components of the system. Proposed Sec. 450.111(d)(4) would require an operator to validate and verify any computing systems and software. Current Sec. Sec. 415.123(b)(8) and 417.123(d) already require verification and validation although this proposed rule would add the requirement that testing be conducted by testers who are independent from the software developers. Independence is essential because it enables testing of cases and conditions that the software developers may not have considered or may have inadvertently omitted. Under proposed Sec. 450.111(d)(5), an operator would be required to develop and implement software development plans as currently required in Sec. Sec. 415.123(b)(9) and 417.123(e)(1) through (5). A software development plan is a means to consolidate and standardize the management of a software development process. These plans would include descriptions of coding standards used, configuration control, programmable logic controllers, and policies on use of commercial-off- the-shelf software and software reuse. It would be updated as necessary throughout the lifecycle of the project, and may be comprised of one or several documents. The configuration control of a software development project is particularly important to ensure and facilitate an efficient and accurate development process. Therefore, the proposal would retain the existing, if implicit, requirements of Sec. 417.123(e)(2) to limit faults in configuration by

[[Page 15401]]

requiring robust configuration management. Proper configuration management ensures consistency and accuracy throughout a system's design, development, operation, and maintenance. In software engineering terms, it is a fundamental aspect of a disciplined approach to the software lifecycle that provides a continuously current baseline for the system. The FAA would set configuration management requirements for all safety-critical documentation and code, including but not limited to software requirements, hazard analysis, test plans, test results, change requests, and development plans. Tools, processes, and procedures for configuration management are employed throughout the software industry. Proposed Sec. 450.111(e) would apply to semi-autonomous software, with a definition nearly identical to that stated in MIL-STD-882E. The FAA regards semi-autonomous software as software that exercises control over safety-critical hardware systems, subsystems, or components, allowing time for safe detection and intervention by a control entity. The software safety requirements for semi-autonomous software are a subset of those required for autonomous software as described in proposed Sec. 450.111(d). Under proposed Sec. 450.111(e)(1), the software component's safety-critical functions, as categorized by the process in proposed Sec. 450.111(a), (b), and (c), would be required to be subjected to full path coverage testing and any inaccessible code must be documented and addressed. Proposed Sec. 450.111(e)(1) would retain and clarify current Sec. 431.35(d) as described in proposed Sec. 450.111(d)(1). The rationale for proposed Sec. 450.111(e)(1) and (d)(1) are identical. Under proposed Sec. 450.111(e)(2), the semi-autonomous software component's safety-critical functions would be required to be tested on flight-like hardware, including testing of nominal operation and fault responses for all safety-critical functions. Proposed Sec. 450.111(e)(2) would also retain and clarify the current requirements in Sec. 431.35(d) as described in proposed Sec. 450.111(d)(2). Under proposed Sec. 450.111(e)(3), an operator would be required to conduct computing system and software hazard analyses for the integrated system. The proposal would retain the requirement of conducting computing system and software hazard analyses that exists in current Sec. Sec. 415.123(b)(7), 417.123(c), and 431.35(d)(4). All software components, regardless of level of control, would require this analysis for the integrated system. The rationale for proposed Sec. 450.111(e)(3) and (d)(3) are identical. Under proposed Sec. 450.111(e)(4), an operator would need to verify and validate any computing systems and software related to semi- autonomous software as described earlier, with the associated rationale, for autonomous software relative to proposed Sec. 450.111(d)(4). This verification and validation would be required to include testing by a test team independent of the software development division or organization. This would retain the requirement for verification and validation of computing systems and software, including testing by an independent test team, as currently required in Sec. Sec. 415.123(b)(8) and 417.123(d). Under proposed Sec. 450.111(e)(5), an operator would be required to develop and implement software development plans as currently required in Sec. Sec. 415.123(b)(9) and 417.123(e)(1) through (5). The rationale for proposed Sec. 450.111(e)(5) and (d)(5) are identical. Proposed Sec. 450.111(f) would apply to redundant fault-tolerant software, which is defined as software that exercises control over safety-critical hardware systems, subsystems, or components, for which a non-software component must also fail in order to impact public health and safety or the safety of property.\215\ There are redundant sources of safety-significant information, and mitigating functionality can respond within any time-critical period. The proposal would include four criteria for redundant fault-tolerant software. ---------------------------------------------------------------------------

\215\ MIL-STD-882E elaborates that the definition of redundant fault-tolerant assumes that there is adequate fault detection, annunciation, tolerance, and system recovery to prevent the hazard occurrence if software fails, malfunctions, or degrades. ---------------------------------------------------------------------------

Proposed Sec. 450.111(f)(1) is consistent with the second criteria for autonomous and semi-autonomous software in proposed Sec. 450.111(d)(2) and (e)(2), in that the software component's safety- critical functions would be required to be tested on flight-like hardware, including testing of nominal operation and fault responses for all safety-critical functions. The proposal would retain and clarify the current requirements in Sec. 431.35(d). Proposed Sec. 450.111(f)(2) would repeat the third criteria for autonomous and semi-autonomous software as described in proposed Sec. 450.111(d)(3) and (e)(3). It would require that an operator conduct computing system and software hazard analyses for the integrated system. The proposal would retain the requirement of conducting computing system and software hazard analyses that exists in the current Sec. Sec. 415.123(b)(7), 417.123(c), and 431.35(d)(4). All software components, regardless of level of control, would require this analysis for the integrated system. The rationale for this part is the same as that for proposed Sec. 450.111(d)(3). Under proposed Sec. 450.111(f)(3), an operator would be required to verify and validate any computing systems and software related to redundant fault-tolerant software as described earlier, with associated rationale, for autonomous software related to proposed Sec. 450.111(d)(4) and semi-autonomous software in proposed Sec. 450.111(e)(4). This verification and validation would be required to include testing by a test team independent of the software development division or organization. This would retain the requirement for verification and validation of computing systems and software, including testing by an independent test team, as currently required under Sec. Sec. 415.123(b)(8) and 417.123(d). Under proposed Sec. 450.111(f)(4), an operator would be required to develop and implement software development plans as currently required under Sec. Sec. 415.123(b)(9) and 417.123(e)(1) through (5). The same rationale applies here as for proposed Sec. 450.111(d)(5) and (e)(5). Proposed Sec. 450.111(g) would apply to software that provides information to a person who uses the information to take actions or make decisions that can impact public health and safety or the safety of property, but does not require operator action to avoid a mishap. Influential software provides information that is used in safety- critical decisions, but cannot cause a hazard on its own. The proposal would include three criteria for influential software. Proposed Sec. 450.111(g)(1) would require an operator to conduct computing system and software hazard analyses for the integrated system. The proposed rule would retain the requirement of conducting computing system and software hazard analyses that exists in the current Sec. Sec. 415.123(b)(7), 417.123(c), and 431.35(d)(4). All software components, regardless of level of control, would require this analysis for the integrated system. The rationale for this proposed section is the same as that for proposed Sec. 450.111(d)(3). Proposed Sec. 450.111(g)(2) would require an operator to verify and validate any computing systems and software related to influential software. This verification and validation would be required to include testing by a test

[[Page 15402]]

team independent of the software development division or organization. This would retain the requirement for verification and validation of computing systems and software, including testing by an independent test team, as currently required under Sec. Sec. 415.123(b)(8) and 417.123(d). The rationale for this proposed section is the same as that for proposed Sec. 450.111(d)(4). Proposed Sec. 450.111(g)(3) would require an operator to develop and implement software development plans as required in existing Sec. Sec. 415.123(b)(9) and 417.123(e)(1) through (5). The same rationale applies here as for proposed Sec. 450.111(d)(5), (e)(5), and (f)(4). Proposed Sec. 450.111(h) would retain the application requirements of Sec. Sec. 415.123 and 417.123, but would vary in the required amount of detail according to the level of control of the software. The amount of application materials would depend on the software component's risk to safety. The proposal would differ from Sec. 431.35 by expressly requiring documentation related to computing systems and software. This requirement was implicit in Sec. 431.35 and the FAA has requested these documents in practice. The FAA would require descriptions of software components with no safety impact but would not impose process requirements. This information would be required to supplement the vehicle description requirements contained elsewhere in this proposal. It would also lead to a shared understanding of the systems and components that do not have known safety significance allowing the FAA only cursorily to review those systems during the license application evaluation without undue concern over undocumented systems, functions, or features.

C. Changes to Parts 401, 413, 414, 420, 437, 440

1. Part 401--Definitions The FAA proposes to modify definitions in parts 401, 414, 417, 420, 437, and 440. This would include adding new definitions to or modifying current definitions in Sec. 401.5 (Definitions) to align with the new proposed regulations. The FAA also proposes to clarify and move some of the definitions that are currently in part 417 to proposed part 450. Also, the proposal would not retain some of the definitions currently in part 417. Finally, the FAA proposes to remove various current definitions from Sec. Sec. 401.5 and 420.5. The FAA proposes to add new definitions to Sec. 401.5. These definitions would be necessary additions to accompany the proposed part 450 requirements, especially in the area of flight safety analysis. Proposed Sec. Sec. 450.113 through 450.139 would require the addition of ``Casualty Area,'' ``Critical Asset,'' ``Deorbit,'' ``Dose-Response Relationship,'' ``Disposal,'' ``Effective Casualty Area,'' ``Expected Casualty,'' ``Flight Abort,'' ``Flight Abort Rules,'' ``Flight Hazard Area,'' ``Liftoff,'' ``Limits of a Useful Mission,'' ``Orbital Insertion,'' and ``Probability of Casualty.'' Most important within that group are ``Critical Asset,'' which is driven by proposed protection criteria for assets that are essential to the national interests of the United States, and ``Disposal,'' which is driven by proposed upper stage disposal risk criteria. The other terms and associated definitions that would be added to support proposed Sec. Sec. 450.113 through 450.139 are referenced in the proposed FSA requirements. The proposed system safety regulations would require the addition of the following terms and associated definitions: ``Hazard Control'' and ``Launch or Reentry System.'' Proposed Sec. 450.101(a)(1) and (b)(1) would require a definition for ``Neighboring Operations Personnel''; proposed Sec. 450.107(b) would require a clear definition of ``Physical Containment''; proposed Sec. 450.111 would require a definition for ``Control Entity'' and ``Software Function''; proposed Sec. Sec. 450.139 and 450.187 would require a definition for ``Toxic Hazard Area.'' Proposed Sec. 450.101(c) would require the addition of ``Vehicle Response Mode.'' The collision avoidance requirements in proposed Sec. 450.169 would require the addition of ``Reentry Window'' and ``Window Closure'' to Sec. 401.5, while the unguided suborbital requirements in proposed Sec. 450.141 would require the addition of ``Unguided Suborbital Launch Vehicle'' and ``Wind Weighting Safety System.'' These new definitions are discussed in detail in corresponding sections of this preamble, including the proposed meaning and usage. Current Sec. 401.5 definitions that would be modified by this rule are as follows: ``Contingency Abort,'' which would be simplified; ``Flight Safety System,'' which would be simplified to incorporate the new term ``Flight Abort;'' and ``Instantaneous Impact Point,'' which would remove drag effects and clarify that this term means a predicted impact point. ``Mishap'' would be defined as having four classes or categories, from most to least severe, based on lessons learned as discussed earlier in this preamble. The current definition of ``Public Safety'' would be removed from Sec. 401.5 and the definition of ``Public'' would be removed from Sec. 420.5, and a new definition for ``Public'' would be added to Sec. 401.5. ``Launch'' and ``Reenter; Reentry'' would be modified to remove language that further scopes what aspects of space transportation are licensed, as discussed earlier. Scoping language would be transferred to proposed Sec. 450.3. ``Safety Critical'' would be modified to remove the last sentence because it is unnecessary. The definition for ``State and United States'' would fix a minor printing error. Section 417.3 contains the definitions for part 417, only some of which would be preserved and added to Sec. 401.5 by this proposed rulemaking. These are ``Command Control System,'' ``Countdown,'' ``Crossrange,'' ``Data Loss Flight Time,'' ``Downrange,'' ``Explosive Debris,'' ``Flight Abort Crew,'' ``Flight Safety Limit,'' ``Gate,'' ``Launch Window,'' ``Normal Flight,'' ``Normal Trajectory,'' ``Operating Environment,'' ``Operation Hazard,'' ``Service Life,'' ``System Hazard,'' ``Sub-Vehicle Point,'' ``Tracking Icon,'' and ``Uprange.'' A number of changes have been made as follows: ``Command Control System'' would be modified to take out unnecessary detail. ``Countdown,'' ``Downrange,'' ``Explosive Debris,'' and ``Normal Flight'' would be modified to add reentry. ``Crossrange,'' ``Launch Window,'' ``Normal Trajectory,'' ``Service Life,'' and ``System Hazard'' would be unchanged. The term ``Flight Abort Crew'' would be changed from ``Flight Safety Crew,'' and would be simplified. ``Operating Environment'' would be changed to add reentry, and would use the term ``lifecycle'' within the definition instead of the limiting reference to acceptance testing, launch countdown, and flight. ``Operation Hazard'' would be modified to clarify that a system hazard is not an operation hazard. The term ``Protected Area'' would be removed, and the term ``Uncontrolled Area'' would be added to Sec. 401.5 but with the inclusion of a launch or reentry site operator, an adjacent site operator, or other entity by agreement who can control an area of land. The term ``Service life'' would be changed to replace reference to a flight termination system component with any safety- critical system component. The last sentence in ``Sub-Vehicle Point'' and ``Uprange'' would be

[[Page 15403]]

removed because these sentences are unnecessary. ``Tracking Icon'' would be modified to include autonomous flight safety systems. ``Data Loss Flight Time,'' ``Flight Safety Limit,'' and ``Gate'' would be changed as discussed earlier in this preamble. In part 414, ``Safety Approval'' would be changed to ``Safety Element Approval,'' so that a part 414 approval is not confused with a proposed part 450 safety approval. Its meaning, however, would remain the same as discussed earlier in this preamble. The definition of ``Maximum Probable Loss (MPL)'' in Sec. 440.3 would be modified to include Neighboring Operations Personnel. The definition of ``Anomaly'' would be removed from part 437 and added to Sec. 401.5 with a revised meaning. Definitions that would not be retained from part 417 are ``Command Destruct Systems,'' ``Conjunction on Launch,'' ``Destruct,'' ``Drag Impact Point,'' ``Dwell Time,'' ``Fail-Over,'' ``Family Performance Data,'' ``Flight Safety System,'' ``Flight Termination System,'' ``Inadvertent Separation Destruct System,'' ``In-Family,'' ``Launch Azimuth,'' ``Launch Crew,'' ``Launch Wait,'' ``Meets Intent Certification,'' ``Non-Operating Environment,'' ``Operating Life,'' ``Out-of-Family,'' ``Passive Component,'' ``Performance Specifications,'' ``Safe-Critical Computer System Function,'' ``Storage Life,'' and ``Waiver.'' These would no longer be a part of commercial space regulations because they have been replaced with different terms (i.e., ``Conjunction on Launch'' and ``Launch Wait''), are already defined in Sec. 401.5 (i.e., ``Flight Safety System''), or are simply not used (all others). This proposed rule would also remove from Sec. 401.5, ``Human Space Flight Incident,'' ``Launch Accident,'' ``Launch Incident,'' ``Reentry Accident,'' and ``Reentry Incident.'' In addition, it would remove ``Launch Site Accident'' from Sec. 420.5. These definitions would be removed because of the proposed changes in definitions related to mishaps. The proposed rule would also remove from Sec. 401.5 ``Emergency Abort,'' because it is no longer in use, and ``Vehicle Safety Operations Personnel,'' because those personnel are referred to as ``Safety Critical Personnel'' in proposed part 450. The FAA also proposes to remove the definition of ``Instantaneous Impact Point'' from Sec. 420.5. This definition would be removed because a new definition with a modified meaning would be added to Sec. 401.5. 2. Part 413--Application Procedures i. Sec. 413.1 Clarification of the Term ``Application'' The FAA proposes to modify Sec. 413.1 to clarify the term ``application.'' Specifically, the FAA would add to Sec. 413.1 that the term application means either an application in its entirety, or a portion of an application for incremental review and determination in accordance with Sec. 450.33. This change is necessary to enable incremental review as discussed earlier. ii. Sec. 413.21 Denial of a License or Permit Application The FAA proposes to correct the section heading of Sec. 413.21 to reflect the content of the section, and also correct paragraph (c) of this section to reference both license and permit applications. Section 413.21 applies to a license or permit application. However, the section heading and paragraph (c) of this section only reference ``license.'' To correct this oversight, the FAA proposes to revise the section heading to read, ``Denial of a license or permit application.'' In addition, the FAA proposes to remove the reference to ``license'' from paragraph (c) so that it would apply to both license and permit applications. iii. ``Complete Enough'' and ``Sufficiently Complete'' The FAA proposes to change the term ``sufficiently complete'' in part 414 to ``complete enough,'' as used in Sec. 413.11, because the two terms mean the same thing. That is, they both describe the point at which the FAA has determined it has sufficient information to accept an application and begin its evaluation to make findings regarding issuing a license or permit. Section 413.11 uses ``complete enough'' to describe when the FAA will accept an application and begin its review for a launch license or permit. The original intent was to use the same term in other chapter III sections. However, the term ``sufficiently complete'' in Sec. Sec. 414.15(a), 415.107(a), and 417.203(c) was never changed to ``complete enough.'' Therefore, the agency proposes to change the term ``sufficiently complete'' to ``complete enough'' for consistency and clarity. The proposed change would be made in part 414 and in proposed part 450, since parts 415 and 417 would be consolidated under this new part. iv. Electronic Submission This rule proposes to amend Sec. 413.7(a)(3) to allow an applicant the option to submit its application by email as a link to a secure server, and remove the requirement that an application be in a format that cannot be altered. In 2015, the FAA published the ``Electronic Applications for Licenses, Permits, and Safety Approvals'' rule.\216\ In that rule, the FAA made the application process more flexible and efficient by providing an applicant with the option to submit applications to the FAA electronically, either via email or on an electronic storage device, rather than submitting a paper application. Specifically, Sec. 413.7(a)(3) requires that an application made via email be submitted as an email attachment to [email protected] in a format that cannot be altered. The FAA's intent was to allow applicants to transact with the agency electronically, in accordance with the Government Paperwork Elimination Act. However, since the rule published, the FAA has found that many of the files containing the necessary application materials are too large to be transmitted successfully by email. When this occurs, applicants have transmitted an email message with a File Transfer Program (FTP) link or a link to a digital repository where the materials can be downloaded by the FAA. The FAA has found this to be an acceptable means of submitting an application. Because the FAA proposes to amend application procedures in this rulemaking, the FAA also proposes to align the regulations with the current acceptable practice of allowing this form of electronic application submission. Accordingly, the FAA proposes to amend Sec. 413.7(a)(3) to allow an applicant the option to submit its application by email as a link to a secure server. ---------------------------------------------------------------------------

\216\ Electronic Applications for Licenses, Permits, and Safety Approvals, Direct Final Rule. 80 FR 30147 (May 27, 2015). ---------------------------------------------------------------------------

Additionally, the 2015 rulemaking identified that in requiring a file format that could not be altered, the FAA would accept a PDF document or a read-only Word file. Because both of these file types can actually be modified, the FAA has found it is impossible to comply with the requirement in Sec. 413.7(a)(3)(ii). However, the need for document and version control of applications still exists for accurate record keeping and to ensure that the application materials the FAA evaluates and enforces represent the final and accurate submission from the applicant and have not been altered in any way. As nearly every form of electronic file submitted could be altered in some way or another, the FAA proposes to replace the current Sec. 413.7(a)(3)(ii) with a new

[[Page 15404]]

requirement that an applicant's email submission would be required to identify each document appended to the email, including any that are included as an attachment or that are stored on a secure server. The FAA further proposes to include a new Sec. 413.7(a)(3)(iii) which would require all electronic files be date stamped and include version control documentation. The replacement of Sec. 413.7(a)(3)(ii) and the addition of Sec. 413.7(a)(3)(iii) would further the FAA's intent to prevent any unrecognized alteration. The proposed amendments to Sec. 414.13(a)(3) would mirror the proposed text of Sec. 413.7(a)(3). The FAA also proposes to remove Sec. 414.11(a)(3) because those requirements would be addressed in the proposed text of Sec. 414.13(a)(3). These changes would remove unactionable application requirements and replace them with regulations that align with current practice and practicable compliance. The FAA also proposes to change the heading of part 413 from ``License Application Procedures'' to ``Application Procedures.'' The proposed heading change reflects the multiple application procedures under part 413, which includes launch and reentry licenses, launch and reentry site licenses, and experimental permits. The FAA proposes this title change to improve the regulatory clarity for future experimental permit applicants. 3. Part 414--Safety Element Approvals As discussed earlier, the FAA proposes to change the part 414 term from ``safety approval'' to ``safety element approval'' to distinguish it from ``safety approval'' as used in parts 415, 431, and 435, and proposed part 450. Also, the FAA proposes to modify part 414 to enable applicants to request a safety element approval in conjunction with a license application as provided in proposed part 450.\217\ ---------------------------------------------------------------------------

\217\ Discussion on safety element approval changes to part 414 can be found in the Process Improvements section A portion of this preamble. ---------------------------------------------------------------------------

4. Part 420--License To Operate a Launch Site As discussed earlier, the proposal would modify the environmental requirements in Sec. 420.15 to match the environmental requirements in proposed Sec. 450.47. Also, the proposal would remove the definitions of ``instantaneous impact point,'' ``launch site accident,'' and ``public'' from Sec. 420.5, and allow alternate time frames in Sec. 420.57. In addition, it would change the heading of Sec. 420.59 from ``Launch Site Accident Investigation Plan'' to ``Mishap Plan,'' and modify the section as discussed earlier. Further, it would make a minor edit in Sec. 420.51. 5. Part 433--License To Operate a Reentry Site As discussed earlier, the proposal would modify the environmental requirements in Sec. Sec. 433.7 and 433.9 to align them with the environmental requirements in proposed Sec. 450.47. 6. Part 437--Experimental Permits As discussed earlier, the FAA proposes to modify part 437 (Experimental Permits) in six ways. First, the proposal would remove the definition of ``anomaly'' from Sec. 437.3 and include a modified version in Sec. 401.5. Second, the proposal would modify the environmental requirements in Sec. 437.21(b)(1) to match the environmental requirements proposed in Sec. 450.47. Third, it would change the name of ``safety approval'' to ``safety element approval'' in Sec. 437.21. Fourth, it would modify the mishap plan requirements in Sec. Sec. 437.41 and 437.75. Fifth, it would change the requirements for collision avoidance to match proposed Sec. 450.169. Sixth, it would allow for alternate time frames in Sec. 437.89. 7. Part 440--Financial Responsibility As discussed earlier, the FAA proposes to modify Sec. 440.15 to allow for alternate time frames, and modify the definition of ``maximum probable loss'' in Sec. 440.3 to align it with the new, proposed definition of ``neighboring operations personnel.''

IV. Regulatory Notices and Analyses

A. Regulatory Evaluation

Changes to Federal regulations must undergo several economic analyses. First, Executive Order 12866 and Executive Order 13563 direct that each federal agency shall propose or adopt a regulation only upon a reasoned determination that the benefits of the intended regulation justify its costs. Second, the Regulatory Flexibility Act of 1980 (Pub. L. 96-354) requires agencies to analyze the economic impact of regulatory changes on small entities. Third, the Trade Agreements Act (Pub. L. 96-39 as amended) prohibits agencies from setting standards that create unnecessary obstacles to the foreign commerce of the United States. In developing U.S. standards, the Trade Agreements Act requires agencies to consider international standards and, where appropriate, that they be the basis of U.S. standards. Fourth, the Unfunded Mandates Reform Act of 1995 (Pub. L. 104-4) requires agencies to prepare a written assessment of the costs, benefits, and other effects of proposed or final rules that include a Federal mandate likely to result in the expenditure by State, local, or tribal governments, in the aggregate, or by the private sector, of $100 million or more annually (adjusted for inflation with base year of 1995). The FAA has provided a more detailed Preliminary Regulatory Impact Analysis of the benefits and costs of this proposed rule in the docket of this rulemaking. This portion of the preamble summarizes this analysis. In conducting these analyses, the FAA has determined that this proposed rule: (1) Has benefits that justify its costs, (2) is not an economically ``significant regulatory action'' as defined in section 3(f) of Executive Order 12866, (3) is ``significant'' as defined in DOT's Regulatory Policies and Procedures, (4) will have a significant economic impact on a substantial number of small entities, (5) will not create unnecessary obstacles to the foreign commerce of the United States, and (6) will not impose an unfunded mandate on state, local, or tribal governments, or on the private sector by exceeding the threshold identified earlier. These analyses are summarized below. Baseline Problem and Statement of Need The FAA is proposing this deregulatory action to comply with President Donald J. Trump's Space Policy Directive-2 (SPD-2) ``Streamlining Regulations on Commercial Use of Space.'' The directive instructed the Secretary of Transportation to publish for notice and comment, proposed rules rescinding or revising the launch and reentry licensing regulations. Section 2 of SPD-2 charged the Department of Transportation with revising regulations to require a single license for all types of commercial space flight operations and replace prescriptive requirements with performance-based criteria. The subject proposed rule would implement this section of SPD-2. The FAA's existing regulations have been criticized as overly- prescriptive, lacking sufficient clarity, outdated, and inconsistent with the requirements of other Government agencies. The regulations for ELV launches in parts 415 and 417 have proven to be too prescriptive and one-size-fits-all. The requirements of these parts were written in a very detailed fashion, which has caused some sections to become outdated or obsolete. In contrast, the regulations for RLV launches have proven to be too general, lacking

[[Page 15405]]

regulatory clarity. For example, part 431 does not contain specificity regarding the qualification of flight safety systems, acceptable methods for flight safety analysis, and ground safety requirements. The purpose of the proposed rule is to streamline and simplify the licensing of launch and reentry operations by relying on performance- based regulations rather than prescriptive regulations. This action would consolidate and revise multiple commercial space launch and reentry regulations addressing licensing into a single regulatory part that states safety objectives to be achieved for the launch of suborbital and orbital expendable and reusable launch vehicles, and the reentry of reentry vehicles. This action would also enable flexible timeframes, remove unnecessarily burdensome ground safety regulations, redefine when launch begins to allow specified pre-flight operations prior to license approval, and allow applicants to seek a license to launch from multiple sites. This proposal is necessary to reduce the need to file and process waivers, improve clarity of the regulations, and relieve administrative and cost burdens on industry and the FAA. The intended effect of this action is to make commercial space transportation regulations more efficient and effective, while maintaining public safety. Since the last comprehensive update to the regulations in 2006, the differences between ELVs and RLVs have blurred. Vehicles that utilize traditional flight safety systems now are partially reusable. For example, the Falcon 9 first stage, launched by Space Exploration Technologies Corp. (SpaceX), routinely returns to the launch site or lands on a barge and other operators are developing launch vehicles with similar capabilities. Although the reuse of safety critical systems or components can have public safety implications, labeling a launch vehicle as expendable or reusable has not shown to impact the primary approach necessary to protect public safety, certainly not to the extent suggested in the differences between part 431 and parts 415 and 417. This deregulatory action would consolidate and revise multiple commercial space regulatory parts to apply a single set of licensing and safety regulations across several types of operations and vehicles. It would also replace many prescriptive regulations with performance- based regulations, giving industry greater flexibility to develop a means of compliance that maximizes their business objectives. This proposed rule would result in net cost savings for industry and enable future innovation in U.S. commercial space transportation. Affected Operators and Launches At the time of writing based on FAA license data, the FAA estimates this proposed rule would affect 12 operators that have an active license or permit to conduct launch or reentry operations. In addition, the FAA estimates this proposed rule would affect approximately 276 launches over the next 5 years based on actual launch and reentry numbers and forecasted numbers.\218\ The FAA anticipates that the proposed rule would reduce the costs of current and future launch operations by removing current prescriptive requirements that are often burdensome to meet or require a waiver. The FAA expects these changes would lead to more efficient launch operations and have a positive effect on expanding the number of future launch and reentry operations. ---------------------------------------------------------------------------

\218\ See the Preliminary Regulatory Impact Analysis of this proposed rule in the docket for more information. The FAA Office of Commercial Space Transportation derived the launches affected by this proposed rule for a 5-year period of analysis due to the rapidly changing environment of commercial space transportation. ---------------------------------------------------------------------------

Summary of Impacts Over a 5-year period of analysis, this proposed rule would result in net present value cost savings to industry of about $19 million using a 7% discount rate or about $21 million using a 3% discount rate, with annualized net cost savings to industry of about $4.6 million using either discount rate. This proposed rule would also result in net present value savings for FAA of about $0.8 million using a 7% discount rate or about $1 million using a 3% discount rate, with annualized net cost savings to FAA of about $0.2 million using either discount rate. The largest quantified cost savings for industry would result from eliminating or relaxing requirements for a flight safety system on some launches (about $11 million in present value savings over 5 years at a discount rate of 7% or about $12 million at a discount rate of 3%) and from reducing the number of personnel that would have to be evacuated from neighboring launch sites (about $8 million in present value savings over 5 years at a discount rate of 7% or about $9 million at a discount rate of 3%). These cost savings are described in more detail below. The FAA proposes to move from prescriptive flight safety system requirements to performance-based requirements. As a result, the proposed rule would not require all launch vehicles to have a full flight safety system. Launch vehicles that have a very low probability of multiple casualties even if vehicle control fails would not be required to have a flight safety system. In addition, vehicles that have moderately low probability of casualty even if vehicle control fails would not be required to have robust flight safety systems.\219\ These performance-based requirements would reduce costs for some vehicle operators, especially for small vehicles or those operating in remote locations. ---------------------------------------------------------------------------

\219\ See discussion in the preamble regarding being compliant with the flight safety systems of part 417. ---------------------------------------------------------------------------

The proposed rule would provide a new definition of neighboring operations personnel and establish new criteria for neighboring launch site personnel for the purposes of risk and financial responsibility. The change would allow affected operators to potentially reduce the number of personnel that have to evacuate and enable more concurrent operations by accepting a small safety risk tradeoff. The FAA has monetized the value of this small increased safety risk as summarized in the following tables. The FAA estimates the present value of these small increased safety risks to be about $1.4 million discounted at 7% or about $1.5 discounted at 3% over the five years. The FAA estimates some small costs to industry that would assist both industry and the FAA in the implementation of this proposed rule, such as providing information to the FAA that other agencies frequently request or performing one-time updates of flight safety limit analyses and ground hazard analyses that would be used to determine performance- based means of compliance that provide future savings. In addition, there may be additional costs for the modification of existing licenses to benefit from the cost saving provisions of this proposed rule. The FAA would also incur small costs for payload review, ground hazard analysis, and the review of modifications to existing licenses. The following table summarizes total quantified savings, costs, and net impacts.

[[Page 15406]]

Summary of Total 5-Year Quantified Savings, Costs and Net Impacts [Presented in thousands of dollars] ---------------------------------------------------------------------------------------------------------------- Industry Industry Impact present value present value FAA present FAA present (7%) (3%) value (7%) value (3%) ---------------------------------------------------------------------------------------------------------------- Cost Savings.................................... $19,386.1 $21,844.5 $1,045.7 $1,208.9 Costs........................................... -542.6 -569.5 -222.3 -237.0 --------------------------------------------------------------- Net Cost Savings............................ 18,843.5 21,275.0 823.4 971.8 --------------------------------------------------------------- Annualized Net Cost Savings............. 4,595.7 4,645.5 200.8 212.2 ---------------------------------------------------------------------------------------------------------------- Increased Safety Risks.......................... -1,370.2 -1,540.6 .............. .............. --------------------------------------------------------------- Net Cost Savings less Increased Safety Risks 17,473.3 19,734.4 823.4 971.8 --------------------------------------------------------------- Annualized Net Cost Savings less 4,261.6 4,309.1 200.8 212.2 Increased Safety Risks................. ---------------------------------------------------------------------------------------------------------------- Table notes: The sum of individual items may not equal totals due to rounding. Negative signs are used to indicate costs and increased safety risks in this table. Present value estimates provided at 7% and 3% per OMB guidance.

The following table summarizes quantified impacts by provision category.

Summary of 5-Year Quantified Savings, Costs and Net Impacts by Provisions [Presented in thousands of dollars] ---------------------------------------------------------------------------------------------------------------- Industry Industry Provision category/impact present value present value FAA present FAA present (7%) (3%) value (7%) value (3%) ---------------------------------------------------------------------------------------------------------------- Waiver Avoidance: --Definition of Launch...................... $32.8 $36.7 $10.3 $11.5 --Waterborne Vessel Hazard Areas............ 65.6 73.3 20.5 22.9 --Waiver for 48 Hour Readiness.............. 41.0 45.8 12,8 14.3 System Safety Program--Safety Official.......... 39.1 43.7 45.7 51.0 Duration of a Vehicle License................... 50.6 56.5 104.3 116.5 Readiness--Elimination of pre-launch meeting 15 709.9 799.0 127.7 143.6 days prior..................................... Flight Safety System--Not required for all 10,612.6 11,981.3 572.5 679.2 launches....................................... Flight Safety Analysis no longer required for 22.1 25.0 2.8 3.2 hybrids........................................ Neighboring Operations *........................ 7,698.9 8,656.7 .............. .............. Ground Hazard Analysis.......................... 113.3 126.6 149.2 166.6 --------------------------------------------------------------- Total Cost Savings.......................... 19,386.1 21,844.5 1,045.7 1,208.9 ---------------------------------------------------------------------------------------------------------------- Payload Review and Determination................ -45.6 -51.2 -46.4 -52.2 Flight Safety Limit Analysis.................... -157.7 -163.8 .............. .............. Ground Hazard Analysis.......................... -24.0 -26.8 -27.2 -30.4 Modification Costs for Existing Licenses........ -315.4 -327.6 -148.7 -154.5 --------------------------------------------------------------- Total Costs................................. -542.6 -569.5 -222.3 -237.0 --------------------------------------------------------------- Net Cost Savings........................ 18,843.5 21,275.0 823.4 971.8 --------------------------------------------------------------- Annualized Net cost Savings......... 4,595.7 4,645.5 200.8 212.2 ---------------------------------------------------------------------------------------------------------------- Increased Safety Risks: Neighboring Operations * -1,370.2 -1,540.6 .............. .............. --------------------------------------------------------------- Net Cost Savings less Increased Safety Risks 17,473.3 19,734.4 823.4 971.8 --------------------------------------------------------------- Annualized Net Cost savings Less 4,261.6 4,309.1 200.8 212.2 Increased Safety Risks................. ---------------------------------------------------------------------------------------------------------------- * Changes to Neighboring Operations requirements result in net savings less increased safety risks. Table notes: The sum of individual items may not equal totals due to rounding. Negative signs are used to indicate costs and increased safety risks in this table. Present value estimates provided at 3% and 7% per OMB guidance.

The FAA also expects industry will gain additional unquantified savings and benefits from the proposed rule, since it provides flexibility and scalability through performance-based requirements that would reduce the future cost of innovation and improve the efficiency and productivity of U.S. commercial space transportation. The following table summarizes some of the proposed changes that would result unquantified savings.

[[Page 15407]]

Unquantified Savings ------------------------------------------------------------------------ Change Savings ------------------------------------------------------------------------ Time Frames................... The proposal would revise time frames in parts 404, 413, 414, 415, 417, 420, 431, 437, and 440 that may be burdensome for some operators. This would increase flexibility by allowing an operator the option to propose alternative time frames that better suit their operations. Eligible time frames include preflight and post- flight reporting among others listed in proposed Appendix A to Part 404-- Alternative Time Frames. Safety Element Approval....... The proposal would remove the requirement in part 414 to publish in the Federal Register the criteria upon which safety element approvals were based. The purpose of this notification requirement was to make clear the criteria and standards the FAA used to assess a safety element, particularly when no clear regulatory requirement existed and there could be other potential users of the safety approval. However, the FAA has found that this requirement is unnecessary, and has potentially discouraged applications for safety element approvals due to concerns that propriety data may be disclosed. FAA anticipates that removing this requirement will lead to increased use of safety element approvals, reducing industry burden and potentially improving safety. Mishaps....................... The proposal would provide the following mishap-related enhancements, which FAA expects to better tailor mishap responses. Replace current part 400 mishap related definitions with a consolidated mishap classification system (streamlines and reduces confusion). Consolidate existing part 400 mishap/accident investigation and emergency response plan requirements into a single part (streamlines and reduces confusion). Exempt pre-coordinated test- induced property damage from being a mishap (removes need to consider test- induced property damages from mishap requirements and likely results in fewer investigations of minor mishaps). This proposal also eliminates the small $25,000 monetary threshold from the current mishap and accident investigation requirements potentially reducing the number of mishaps being investigated that do not pose a threat to public safety. A minor damage that does not pose a threat to public safety can easily exceed the $25,000 monetary threshold, triggering potentially costly and burdensome notification, reporting, and investigation requirements. Toxics........................ The proposal would replace part 417 toxic release hazard analysis requirements with performance-based regulations that would provide flexibility for operators to comply with the required risk criteria in varied and innovative ways relative to their operations. Lightning protection The proposal would remove appendix G to requirement. part 417, Natural and Triggered Lightning Flight Commit Criteria, and replace it with the performance-based requirements. The current requirements are outdated, inflexible, overly conservative, and not explicitly applicable to RLVs and RVs. The proposed revision would provide an operator with more flexibility, and allow it to take into account the vehicle's mission profile when determining how to mitigate the direct and indirect effects of a lightning discharge. ------------------------------------------------------------------------

The FAA intends to update its analysis with additional information and data identified during the comment period to better assess the impacts of this deregulatory action. Estimates may change for the final rule as a result. The FAA invites comments on the benefits, savings, or costs of this proposed rule. Send comments by any of the methods identified under Addresses in this proposed rule. Specifically, the FAA requests information and data that can be used to quantify the additional savings of this proposed rule. Please provide references and sources for information and data.

B. Regulatory Flexibility Determination

The Regulatory Flexibility Act of 1980 (Pub. L. 96-354) (RFA) establishes ``as a principle of regulatory issuance that agencies shall endeavor, consistent with the objectives of the rule and of applicable statutes, to fit regulatory and informational requirements to the scale of the businesses, organizations, and governmental jurisdictions subject to regulation. To achieve this principle, agencies are required to solicit and consider flexible regulatory proposals and to explain the rationale for their actions to assure that such proposals are given serious consideration.'' The RFA covers a wide-range of small entities, including small businesses, not-for-profit organizations, and small governmental jurisdictions. Agencies must perform a review to determine whether a rule will have a significant economic impact on a substantial number of small entities. If the agency determines that it will, the agency must prepare a regulatory flexibility analysis as described in the RFA. Under Section 603(b) of the RFA, the initial regulatory flexibility analysis for a proposed rule must: Describe reasons the agency is considering the action; State the legal basis and objectives; Describe the recordkeeping and other compliance requirements; State all federal rules that may duplicate, overlap, or conflict; Describe an estimated number of small entities impacted; and Describe alternatives considered. 1. Description of Reasons the Agency Is Considering the Action The Chair of the National Space Council, the Vice President, directed the Secretaries of Transportation and Commerce, and the Director of the Office of Management and Budget, to conduct a review of the U.S. regulatory framework for commercial space activities and report back within 45 days with a plan to remove barriers to commercial space enterprises. The Council approved four recommendations, including the Department of Transportation's recommendation that the launch and reentry regulations should be reformed into a consolidated, performance-based licensing regime. Codifying the recommendations of the Council, SPD-2 was issued on May 24, 2018. SPD-2 instructed the Secretary of Transportation to publish for notice and comment proposed rules rescinding or revising the launch and reentry licensing regulations, no later than February 1, 2019. SPD-2 charged the Department with revising the regulations such that they would require a single license for all types of commercial space flight operations and replace prescriptive requirements with performance-based criteria. The current action is complying with this recommendation. Current regulations setting forth procedures and requirements for commercial space transportation licensing were based largely on the distinction between expendable or reusable launch vehicles. Specifically, 14 CFR parts 415 and 417 address the launch of expendable launch vehicles, part 431 addresses the launch and

[[Page 15408]]

reentry of reusable launch vehicles, and part 435 addresses the reentry of reentry vehicles. The regulations in parts 415 and 417 are based on the Federal launch range standards developed in the 1990s. Parts 431 and 435 are primarily process-based, relying on a license applicant to derive safety requirements through a ``system safety'' process. While these regulations satisfied the need of the commercial launch industry at the time they were issued, the industry has changed and continues to evolve, thus rendering the current regulatory structure cumbersome and outdated. 2. Statement of the Legal Basis and Objectives The Commercial Space Launch Act of 1984, as amended and re-codified at 51 U.S.C. 50901-50923 (the Act), authorizes the Department of Transportation, and the FAA through delegation, to oversee, license, and regulate commercial launch and reentry activities, and the operation of launch and reentry sites as carried out by U.S. citizens or within the United States. Section 50905 directs the FAA to exercise this responsibility consistent with public health and safety, safety of property, and the national security and foreign policy interests of the United States. The FAA is authorized to regulate only to the extent necessary to protect the public health and safety, safety of property, and national security and foreign policy interests of the United States. In addition, section 50903 requires that the FAA encourage, facilitate, and promote commercial space launches and reentries by the private sector. If adopted as proposed, this rulemaking would streamline and increase flexibility in the FAA's commercial space regulations. This action would consolidate and revise multiple regulatory parts to apply a single set of licensing and safety regulations across several types of operations and vehicles. It would also replace many prescriptive regulations with performance-based rules, giving industry greater flexibility to develop means of compliance that maximize their business objectives while maintaining an equivalent level of safety to the agency's current regulations. Because this rulemaking would amend the FAA's launch and reentry requirements, it falls under the authority delegated by the Act. 3. Description of the Recordkeeping and Other Compliance Requirements The FAA is not proposing any substantive changes to the requirements specified below. However, the agency is proposing to consolidate these requirements into a new, proposed part 450 (Launch and Reentry License Requirements); clarify that the consolidated requirements apply to any licensed launch or reentry; and make other minor, clarifying edits. The following is a summary of the proposed changes: i. Public Safety Responsibility and Compliance With License The FAA would consolidate the public safety responsibility requirements in current Sec. Sec. 417.7 and 431.71(a) into proposed Sec. 450.201, Public Safety Responsibility. Also, the FAA would move the compliance requirement in current Sec. 431.71(b) to its own section, proposed Sec. 450.203 (Compliance with License). Although the location of these requirements would change, the requirements themselves would not change. Therefore, proposed Sec. 450.201 would provide that a licensee is responsible for ensuring public safety and safety of property during the conduct of a licensed launch or reentry. And proposed Sec. 450.203 would require that a licensee conduct a licensed launch or reentry in accordance with representations made in its license application, the requirements of part 450, subparts C and D, and the terms and conditions contained in the license. A licensee's failure to act in accordance with these items would be sufficient basis to revoke a license, or some other appropriate enforcement action. ii. Records. The FAA would consolidate the current record requirements in Sec. Sec. 417.15(a) and (b) and 431.77(a) and (b) into proposed Sec. 450.219(a) and (b). However, the FAA would replace the term ``launch accident'' in paragraph (b) with ``class 1 or class 2 mishap.'' As discussed in more detail in the Part 401--Definitions section of this preamble, the FAA is proposing to replace current part 401 definitions involving ``accident,'' ``incident,'' and ``mishap'' with specified mishap classes. As such, the proposed regulation would require a licensee to maintain, for 3 years, all records, data, and other material necessary to verify that a launch or reentry is conducted in accordance with representations contained in the licensee's application. The exception would be for a class 1 or class 2 mishap, where a licensee would be required to preserve all records related to the event. These records would be required to be retained until the completion of any Federal investigation and the FAA has notified the licensee that the records need not be retained. The licensee would be required to make all records required to be maintained under the regulations available to Federal officials for inspection and copying. 4. All Federal Rules That May Duplicate, Overlap, or Conflict No other federal rules duplicate, overlap, or conflict with FAA's launch and reentry licensing requirements. 5. Description and an Estimated Number of Small Entities Impacted The FAA has identified two potential small entities that this proposed rule would impact, Vector Launch, Inc. and Generation Orbit. Both operators employ fewer than 1,500 people and both were in pre- application consultation to launch under parts 415 and 417 at the time of this writing.\220\ These two companies are the only small entities identified in this analysis that may be directly affected by this proposed rule. ---------------------------------------------------------------------------

\220\ The FAA uses the current Small Business Administration size standard of 1,500 employees for passenger and freight air transportation. This information is found in https://www.sba.gov/sites/default/files/files/Size_Standards_Table_2017.pdf. ---------------------------------------------------------------------------

6. Alternatives Considered The FAA considered three alternatives to the proposed rule. i. No Change to Current Regulations This alternative was not chosen because the current regulations are outdated, prescriptive, and do not adequately reflect industry current practices or technology development. The inefficiency of the licensing process due to current regulations risks stifling innovation and growth of the industry, especially for small operators. ii. Propose a More Process-Based Regulatory Approach With this alternative, the FAA would propose less detailed regulations that would rely primarily on the outcome of an operator's system safety process to protect public safety. This alternative was not chosen because it would lack regulatory clarity without adding any additional flexibility for a launch or reentry operator which may be more burdensome to small operators compared to large operators. iii. Propose a Defined Modular Application Process With this alternative, the FAA would propose similar safety requirements but would add a more defined incremental

[[Page 15409]]

or modular application process. The current proposal enables an incremental application process, but does not define one with explicit modules and time frames. This alternative was not chosen because the FAA has no experience with an incremental or modular application process with which to base a proposal. In addition, a more defined incremental or modular application process may be less flexible and scalable and therefore more burdensome to small operators. The FAA expects this proposed rule would provide regulatory relief to small entities from current prescriptive requirements and result in net savings. As discussed previously in this section, the FAA identified two possible small entities that would be affected by this proposed rule but they are in the pre-application stage for potential ELV and RLV launches and we have little information on how they may comply with existing or proposed requirements. As these entities have not begun operations, we do not have estimates of the costs savings or costs that would reliably apply. However, the following are some estimates of per entity cost savings and costs based on data representing existing ELV and RLV operators. We note that some of the estimated savings and costs of this proposed rule may not apply to these entities. Cost Savings i. Readiness--Elimination of Pre-Launch Meeting 15 Days Prior (Sec. 450.155) ELV operators might save $4,600 per avoided launch readiness meeting, however this assumes the average number of people at each meeting would be 25 and this might not apply to a small business. ii. Flight Safety System--Not Required for All Launches (Sec. 450.145) For launches where an FSS would not be required under the proposal, RLV operators might save $195,000 per launch vehicle for a vehicle using an existing design. An ELV operator might save $680,000 per launch. Both ELV and RLV operators might save an estimated $1.3 million for new vehicle designs by not having to incur all the research, design, testing, materials and installation costs for an FSS. iii. Ground Hazard Analysis (Sec. 450.185) An ELV operator might save $28,000 per application by not having to do a ground hazard analysis under this proposal. Costs i. Payload Review and Determination (Sec. 450.43) The proposed rule could cause small operators to incur about $204 more per launch than due to additional payload review and determination costs. ii. Ground Hazard Analysis (Sec. 450.185) RLV applicants might incur about $3,000 more per application due to having to perform ground hazard analyses under the proposal. The FAA invites comments on this initial regulatory flexibility analysis for the proposed rule. Send comments by any of the methods identified under Addresses in this proposed rule. Specifically, the FAA requests information and data that can be used to quantify savings and costs to small operators directly affected by this proposed rule. Please provide references and sources for information and data.

C. International Trade Impact Assessment

The Trade Agreements Act of 1979 (Pub. L. 96-39), as amended by the Uruguay Round Agreements Act (Pub. L. 103-465), prohibits federal agencies from establishing standards or engaging in related activities that create unnecessary obstacles to the foreign commerce of the United States. Pursuant to these Acts, the establishment of standards is not considered an unnecessary obstacle to the foreign commerce of the United States, so long as the standard has a legitimate domestic objective, such as the protection of safety, and does not operate in a manner that excludes imports that meet this objective. The statute also requires consideration of international standards and, where appropriate, that they be the basis for U.S. standards. The FAA has assessed the potential effect of this proposed rule and determined that it will not create unnecessary obstacles to the foreign commerce of the United States.

D. Unfunded Mandates Assessment

Title II of the Unfunded Mandates Reform Act of 1995 (Pub. L. 104- 4) requires each federal agency to prepare a written statement assessing the effects of any Federal mandate in a proposed or final agency rule that may result in an expenditure of $100 million or more (in 1995 dollars) in any one year by State, local, and tribal governments, in the aggregate, or by the private sector; such a mandate is deemed to be a ``significant regulatory action.'' The threshold after adjustment for inflation is $150 million using the most current annual (2017) Implicit Price Deflator for Gross Domestic Product from the U.S. Bureau of Economic Analysis. This proposed rule does not contain such a mandate; therefore, the requirements of Title II of the Act do not apply.

E. Paperwork Reduction Act

The Paperwork Reduction Act of 1995 (44 U.S.C. 3507(d)) requires that the FAA consider the impact of paperwork and other information collection burdens imposed on the public. According to the 1995 amendments to the Paperwork Reduction Act (5 CFR 1320.8(b)(2)(vi)), an agency may not collect or sponsor the collection of information, nor may it impose an information collection requirement unless it displays a currently valid Office of Management and Budget (OMB) control number. This action contains the following proposed consolidation of two existing information collection requirements, previously approved under OMB Control Numbers 2120-0608 and 2120-0643, under a new OMB control number. As required by the Paperwork Reduction Act of 1995 (44 U.S.C. 3507(d)), the FAA will submit the proposed information collection requirements to OMB for its review. In addition, the FAA has published a separate notice of the proposed requirements for public comment, and has included the notice in the docket for this rulemaking. The notice includes instructions on how to submit comments specifically to the proposed information collection requirements. Additional details on assumptions and calculations used in this section are presented in the Preliminary Regulatory Impact Analysis available in the docket of this rulemaking. The following estimates are included in the total savings and costs summarized in the Regulatory Evaluation section and considered in the Regulatory Flexibility Determination section of this proposed rule. Summary: The FAA proposes to consolidate under a new part 450, the requirements currently contained in parts 415 and 417 for the launch of an ELV, in part 431 for the launch and reentry of an RLV, and in part 435 for the reentry of a reentry vehicle other than an RLV. The result of this effort would be streamlined regulations designed to be more flexible and scalable, with reduced timelines and minimal duplicative jurisdiction. The net result would be reduced paperwork for operators, although for some provisions paperwork would increase. Use: The information would be used by FAA to evaluate the launch and

[[Page 15410]]

reentry operators' applications and to ensure safety. Paperwork Impact to Industry Respondents (including number of): The information collection would potentially affect 12 operators based on available data at the time of writing. Annual Burden Estimate: Most changes in part 450 would result in a reduction in the paperwork burden. The paperwork associated with industry requesting waivers to certain provisions would be alleviated. Paperwork associated with industry requesting license modifications would also be reduced because an operator would not have to modify a license if the specific safety official were to change. In addition, with the extension of RLV licenses to up to five years, it is likely that fewer licenses would be issued, resulting in less paperwork. Due to the change in launch scope, the documentation accompanying a ground hazard analysis for ELV operators would be reduced. Industry Cost Savings The following table indicates the frequency of responses, the estimated time per response, the burdened wage rate, annual hours, and the cost for each cost saving provision. Response frequency is provided for the estimated number of waivers avoided (Sec. 450.3), estimated reduction in annual number of licenses modified (Sec. 450.103), estimated reduction in annual license renewals, and the estimated annual number of launches for which there would be a reduction in ground hazard analysis paperwork (Sec. 450.185). An estimated time for each response is also indicated below, as are burdened hourly wage rates for the specific personnel associated with each provision and annual hours and total cost savings.

Industry Paperwork Cost Savings ---------------------------------------------------------------------------------------------------------------- Estimated time Description Response per response Industry wage Annual hours Cost savings frequency (hours) rate ---------------------------------------------------------------------------------------------------------------- Waiver Avoidance (Sec. 450.3). 17 20 $100.03 340 $34,010 System Safety Program--Safety 5.6 24 71.01 134.4 9,544 Official (Sec. 450.103)...... Duration of a Vehicle License 1.2 126.5 81.28 151.8 12,338 (Sec. 450.7)................. Ground Safety (Sec. 450.185).. 1 340 81.28 340 27,634 ------------------------------------------------------------------------------- Total Annual Savings........ .............. .............. .............. 966 83,526 ----------------------------------------------------------------------------------------------------------------

Cost savings includes paperwork related to waivers avoided due to the definition of launch, waterborne vessel protection, and removal of 48-hour readiness requirement. Industry Paperwork Burden Other changes would result in an increase in paperwork burden. The Payload Review and Determination section (Sec. 450.43) would add requirements for applicants to provide explosive potential of payload materials, alone and in combination with other materials on the payload for launches, as well as the appropriate transit time to final orbit for payloads with significant transit time after release from vehicle. The FAA is adding requirements for ground hazard analysis (Sec. 450.185) for RLV launches. The proposed rule would require RLVs to submit information to the FAA. The table below indicates the frequency of responses, estimated time per response, burdened hourly wage rate, annual hours, and the cost for each provision that would add burden. Response frequency is provided for the estimated number of explosive potential and transit time calculations, and the estimated number of annual RLV applications which would require ground hazard analysis. An estimated time per response is also indicated below, as are burdened hourly wage rates for the specific personnel associated with each provision and annual hours and total cost savings.

Industry Paperwork Burden ---------------------------------------------------------------------------------------------------------------- Estimated time Description Response per response Industry wage Annual hours Cost frequency (hours) rate ---------------------------------------------------------------------------------------------------------------- Explosive Potential (Sec. 50 2 $81.28 100 $8,128 450.43)........................ Transit time (Sec. 450.43).... 50 0.5 81.28 25 2,032 Ground Safety (Sec. 450.185).. 2 36 81.28 72 5,852 ------------------------------------------------------------------------------- Total Cost Burden........... .............. .............. .............. 197 16,012 ----------------------------------------------------------------------------------------------------------------

The following table summarizes the industry total annual paperwork savings, total annual burden and the net annual savings.

Industry Net Paperwork Savings ------------------------------------------------------------------------ Description Annual hours Cost savings ------------------------------------------------------------------------ Total Annual Savings.................... 966 $83,526 Total Annual Burden..................... 197 16,012 -------------------------------

[[Page 15411]]

Net Annual Savings.................. 769 67,514 ------------------------------------------------------------------------

Paperwork Burden to the Federal Government The following tables summarizes FAA paperwork savings and burden. Similar to industry burden savings, the FAA would receive burden relief from waivers avoided due to the definition of launch, waterborne vessel protection, and removal of the 48-hour readiness requirement. See the Regulatory Impact Analysis available in the docket for more details on these estimates and calculations.

FAA Paperwork Cost Savings ---------------------------------------------------------------------------------------------------------------- Estimated time Description per response FAA wage rate Annual hours Cost savings (hours) ---------------------------------------------------------------------------------------------------------------- Waiver Avoidance (Sec. 450.3)................. 7.5 $83.26 127.5 $10,616 System Safety Program--Safety Official (Sec. 24 82.88 134.4 11,139 450.103)....................................... Duration of a Vehicle License (Sec. 450.7).... 253.5 83.61 304.2 25,434 Ground Safety (Sec. 450.185).................. 439 82.88 439 36,384 --------------------------------------------------------------- Total Annual Savings........................ .............. .............. 1,005 83,573 ----------------------------------------------------------------------------------------------------------------

FAA Paperwork Burden ---------------------------------------------------------------------------------------------------------------- Estimated time Description per response FAA wage rate Annual hours Cost savings (hours) ---------------------------------------------------------------------------------------------------------------- Explosive Potential (Sec. 450.43)............. 2.0 $82.88 100 $8,288 Transit time (Sec. 450.43).................... 0.5 82.88 25 2,072 Ground Safety (Sec. 450.185).................. 40 82.88 80 6,630 --------------------------------------------------------------- Total Annual Burden......................... .............. .............. 205 16,990 ----------------------------------------------------------------------------------------------------------------

FAA Net Paperwork Savings ------------------------------------------------------------------------ Description Annual hours Cost savings ------------------------------------------------------------------------ Total Annual Savings.................... 1,005 $83,573 Total Annual Burden..................... 205 16,990 ------------------------------- Net Annual Savings.................. 800 66,583 ------------------------------------------------------------------------

Voluntary One-Time Modification of Existing Licenses There are currently 24 active licenses held by 12 operators. Once the rule is in effect, existing licenses would be grandfathered under the current provisions, unless the licenses are modified. Operators may choose to modify their licenses to benefit from the cost saving provisions of the proposed rule--some operators may choose also to wait until they apply for a new license. The FAA assumes modifications of licenses would occur within the first year after the rule is effective. The FAA assumes it would take about one month for an industry aerospace engineer to develop documentation and analysis to apply for a modification of an existing license and about two weeks for an FAA employee to review an application for a modification of an existing license. The following estimates assume all licenses would be modified. This overestimates paperwork costs, since some operators may not find it advantageous to modify their existing licenses. The FAA requests comment on these assumptions and the following estimates to apply for applications to modify existing licenses. Specifically, the FAA requests information if licenses holders would modify existing licenses for changes from this proposed rule or wait to apply for new licenses. The FAA may revise these assumptions and estimates for the final rule.

[[Page 15412]]

Industry Burden Costs for Applications To Modify Existing Licenses -------------------------------------------------------------------------------------------------------------------------------------------------------- Time (one month Year Wage rate of work hours) Cost per Number of Total burden Total costs * license licenses hours -------------------------------------------------------------------------------------------------------------------------------------------------------- 1................................................. $81.28 173 $14,061 24 4,152 $337,457 -------------------------------------------------------------------------------------------------------------------------------------------------------- * One month of work hours based on the following calculations: 52 work weeks/year x 40 work hours/week = 2,080 work hours/year; and, 2,080 work hours/ year / 12 months = 173 work hours/month (rounded).

FAA Burden Costs To Review Applications To Modify Existing Licenses -------------------------------------------------------------------------------------------------------------------------------------------------------- Hours (two Year Wage rate weeks of work Cost per Number of Total burden Total costs hours) license licenses hours -------------------------------------------------------------------------------------------------------------------------------------------------------- 1................................................. $82.88 80 $6,630 24 1,920 $159,130 --------------------------------------------------------------------------------------------------------------------------------------------------------

The agency is soliciting comments to-- (1) Evaluate whether the proposed information requirement is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility; (2) Evaluate the accuracy of the agency's estimate of the burden; (3) Enhance the quality, utility, and clarity of the information to be collected; and (4) Minimize the burden of collecting information on those who are to respond, including by using appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology. Individuals and organizations may send comments on the information collection requirement to the address listed in the ADDRESSES section at the beginning of this preamble by June 14, 2019. Comments also should be submitted to the Office of Management and Budget, Office of Information and Regulatory Affairs, Attention: Desk Officer for FAA, New Executive Building, Room 10202, 725 17th Street NW, Washington, DC 20053.

F. International Compatibility

In keeping with U.S. obligations under the Convention on International Civil Aviation, it is FAA policy to conform to International Civil Aviation Organization (ICAO) Standards and Recommended Practices to the maximum extent practicable. The FAA has determined that there are no ICAO Standards and Recommended Practices that correspond to these proposed regulations.

G. Environmental Analysis

FAA Order 1050.1F identifies FAA actions that are categorically excluded from preparation of an environmental assessment or environmental impact statement under the National Environmental Policy Act in the absence of extraordinary circumstances. The FAA has determined this rulemaking action qualifies for the categorical exclusion identified in paragraph 5-6.6 and involves no extraordinary circumstances.

V. Executive Order Determinations

A. Executive Order 13132, Federalism

The FAA has analyzed this proposed rule under the principles and criteria of Executive Order 13132, Federalism. The agency has determined that this action would not have a substantial direct effect on the States, or the relationship between the Federal Government and the States, or on the distribution of power and responsibilities among the various levels of government, and, therefore, would not have Federalism implications.

B. Executive Order 13211, Regulations That Significantly Affect Energy Supply, Distribution, or Use

The FAA analyzed this proposed rule under Executive Order 13211, Actions Concerning Regulations that Significantly Affect Energy Supply, Distribution, or Use (May 18, 2001). The agency has determined that it would not be a ``significant energy action'' under the executive order and would not be likely to have a significant adverse effect on the supply, distribution, or use of energy.

C. Executive Order 13609, International Cooperation

Executive Order 13609, Promoting International Regulatory Cooperation, promotes international regulatory cooperation to meet shared challenges involving health, safety, labor, security, environmental, and other issues and to reduce, eliminate, or prevent unnecessary differences in regulatory requirements. The FAA has analyzed this action under the policies and agency responsibilities of Executive Order 13609, and has determined that this action would have no effect on international regulatory cooperation.

D. Executive Order 13771, Reducing Regulation and Controlling Regulatory Costs

This proposed rule is expected to be a deregulatory action under Executive Order 13771 and would result in net cost savings for industry that would likely reduce the future cost of innovation in U.S. commercial space transportation. The Preliminary Regulatory Impact Analysis for the proposed rule provides additional information.

VI. Additional Information

A. Comments Invited

The FAA invites interested persons to participate in this rulemaking by submitting written comments, data, or views. Also, the agency invites comments regarding potential overlap with the regulatory requirements of other agencies not addressed in this proposed rule. In addition, the FAA invites comments relating to the economic, environmental, energy, or federalism impacts that might result from adopting the proposals in this document. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. To ensure the docket does not contain duplicate comments, commenters should send only one copy of written comments, or if comments are filed electronically, commenters should submit only one time. The FAA will file in the docket all comments it receives, as well as a report summarizing each substantive public contact with FAA personnel concerning this proposed rulemaking. Before acting on this proposal, the FAA will consider all comments it receives on or before the

[[Page 15413]]

closing date for comments. The FAA will consider comments filed after the comment period has closed if it is possible to do so without incurring expense or delay. The agency may change this proposal in light of the comments it receives. Proprietary or Confidential Business Information: Commenters should not file proprietary or confidential business information in the docket. Such information must be sent or delivered directly to the person identified in the FOR FURTHER INFORMATION CONTACT section of this document, and marked as proprietary or confidential. If submitting information on a disk or CD ROM, mark the outside of the disk or CD ROM, and identify electronically within the disk or CD ROM the specific information that is proprietary or confidential. Under 14 CFR 11.35(b), if the FAA is aware of proprietary information filed with a comment, the agency does not place it in the docket. It is held in a separate file to which the public does not have access, and the FAA places a note in the docket that it has received it. If the FAA receives a request to examine or copy this information, it treats it as any other request under the Freedom of Information Act (5 U.S.C. 552). The FAA processes such a request under Department of Transportation procedures found in 49 CFR part 7.

B. Availability of Rulemaking Documents

An electronic copy of rulemaking documents may be obtained from the internet by--Searching the Federal eRulemaking Portal (http://www.regulations.gov); Visiting the FAA's Regulations and Policies web page at http://www.faa.gov/regulations_policies or Accessing the Government Printing Office's web page at http://www.gpo.gov/fdsys/. Copies may also be obtained by sending a request to the Federal Aviation Administration, Office of Rulemaking, ARM-1, 800 Independence Avenue SW, Washington, DC 20591, or by calling (202) 267-9680. Commenters must identify the docket or notice number of this rulemaking. All documents the FAA considered in developing this proposed rule, including economic analyses and technical reports, may be accessed from the internet through the Federal eRulemaking Portal referenced in item (1) above.

List of Subjects

14 CFR Part 401

Organization and functions (Government agencies), Space transportation and exploration.

14 CFR Part 404

Administrative practice and procedure, Space transportation and exploration.

14 CFR Part 413

Confidential business information, Space transportation and exploration.

14 CFR Part 414

Airspace, Aviation safety, Space transportation and exploration.

14 CFR Part 420

Environmental protection, Reporting and recordkeeping requirements, Space transportation and exploration.

14 CFR Part 437

Aircraft, Aviation safety, Reporting and recordkeeping requirements, Space transportation and exploration.

14 CFR Part 440

Indemnity payments, Insurance, Reporting and recordkeeping requirements, Space transportation and exploration.

14 CFR Part 450

Aircraft, Aviation safety, Environmental protection, Investigations, Reporting and recordkeeping requirements, Space transportation and exploration.

The Proposed Amendment

In consideration of the foregoing, the Federal Aviation Administration proposes to amend chapter III of title 14, Code of Federal Regulations as follows:

PART 401--ORGANIZATION AND DEFINITIONS

0 1. The authority citation for part 401 continues to read as follows:

Authority: 51 U.S.C. 50101-50923.

0 2. In Sec. 401.5: 0 a. Add, in alphabetical order, the definitions of ``Anomaly,'' ``Casualty area,'' and ``Command control system''; 0 b. Revise the definition of ``Contingency abort''; 0 c. Add, in alphabetical order, the definitions of ``Control entity,'' ``Countdown,'' ``Critical asset,'' ``Crossrange,'' ``Data loss flight time,'' ``Deorbit,'' ``Disposal,'' ``Dose-response relationship,'' ``Downrange,'' and ``Effective casualty area''; 0 d. Remove the definition of ``Emergency abort''; 0 e. Add, in alphabetical order, the definition of ``Expected casualty,'' ``Explosive debris,'' ``Flight abort,'' ``Flight abort crew,'' ``Flight abort rules,'' ``Flight hazard area,'' and ``Flight safety limit''; 0 f. Revise the definition of ``Flight safety system''; 0 g. Add, in alphabetical order, the definitions of ``Gate'' and ``Hazard control''; 0 h. Remove the definition of ``Human space flight incident''; 0 i. Revise the definitions of ``Instantaneous impact point'' and ``Launch''; 0 j. Remove the definitions of ``Launch accident'' and ``Launch incident''; 0 k. Add, in alphabetical order, the definitions of ``Launch or reentry system,'' ``Launch window,'' ``Liftoff,'' and ``Limits of a useful mission''; 0 l. Revise the definition of ``Mishap''; 0 m. Add, in alphabetical order, the definitions of ``Mishap, Class 1,'' ``Mishap, Class 2,'' ``Mishap, Class 3'', ``Mishap, Class 4,'' ``Neighboring operations personnel,'' ``Normal flight,'' ``Normal trajectory,'' ``Operating environment,'' and ``Operation hazard''; 0 n. Revise the definition of ``Operator''; 0 o. Add, in alphabetical order, the definitions of ``Orbital insertion,'' ``Physical containment,'' ``Probability of casualty,'' and ``Public''; 0 p. Remove the definition of ``Public safety''; 0 q. Revise the definition of ``Reenter; reentry''; 0 r. Remove the definitions of ``Reentry accident'' and ``Reentry incident''; 0 s. Add, in alphabetical order, the definition of ``Reentry window''; 0 t. Revise the definition of ``Safety critical''; 0 u. Add, in alphabetical order, the definitions of ``Service life'' and ``Software function''; 0 v. Revise the definition of ``State and United States''; 0 w. Add, in alphabetical order, the definitions of ``Sub-vehicle point,'' ``System hazard,'' ``Toxic hazard area,'' ``Tracking icon,'' ``Uncontrolled area,'' ``Unguided suborbital launch vehicle,'' ``Uprange,'' and ``Vehicle response modes''; 0 x. Remove the definition of ``Vehicle safety operations personnel''; and 0 y. Add, in alphabetical order, the definitions of ``Wind weighting safety system'' and ``Window closure''. The additions and revisions read as follows:

Sec. 401.5 Definitions.

* * * * * Anomaly means any condition during licensed or permitted activity that

[[Page 15414]]

deviates from what is standard, normal, or expected, during the verification or operation of a system, subsystem, process, facility, or support equipment. * * * * * Casualty area means the area surrounding each potential debris or vehicle impact point where serious injuries, or worse, can occur. Command control system means the portion of a flight safety system that includes all components needed to send a flight abort control signal to the on-board portion of a flight safety system. Contingency abort means a flight abort with a landing at a planned location that has been designated in advance of vehicle flight. Control entity means a person or device that can control another device or process. Countdown means the timed sequence of events that must take place to initiate flight of a launch vehicle or reentry of a reentry vehicle. * * * * * Critical asset means an asset that is essential to the national interests of the United States. Critical assets include property, facilities, or infrastructure necessary to maintain national defense, or assured access to space for national priority missions. Crossrange means the distance measured along a line whose direction is either 90 degrees clockwise (right crossrange) or counter-clockwise (left crossrange) to the projection of a vehicle's planned nominal velocity vector azimuth onto a horizontal plane tangent to the ellipsoidal Earth model at the vehicle's sub-vehicle point. The terms right crossrange and left crossrange may also be used to indicate direction. Data loss flight time means the shortest elapsed thrusting or gliding time during which a vehicle flown with a flight safety system can move from its trajectory to a condition where it is possible for the vehicle to violate a flight safety limit. Deorbit means the flight of a vehicle that begins with the final command to commit to a perigee below 70 nautical miles (approximately 130 kilometers), and ends when all vehicle components come to rest on the Earth. Disposal means the return or attempt to return, purposefully, a launch vehicle stage or component, not including a reentry vehicle, from Earth orbit to Earth, in a controlled manner. Dose-response relationship means a quantitative methodology used to assign a probability of casualty within a population group given exposure to a toxic chemical of known or predicted concentration and duration. Downrange means the distance measured along a line whose direction is parallel to the projection of a vehicle's planned nominal velocity vector azimuth into a horizontal plane tangent to the ellipsoidal Earth model at the vehicle sub-vehicle point. The term downrange may also be used to indicate direction. Effective casualty area means the aggregate casualty area of each piece of debris created by a vehicle failure at a particular point on its trajectory. The effective casualty area for each piece of debris is a modeling construct in which the area within which 100 percent of the population are assumed to be a casualty, and outside of which 100 percent of the population are assumed not to be a casualty. * * * * * Expected casualty means the mean number of casualties predicted to occur per flight operation if the operation were repeated many times. * * * * * Explosive debris means solid propellant fragments or other pieces of a vehicle or payload that result from breakup of the vehicle during flight and that explode upon impact with the Earth's surface and cause overpressure. * * * * * Flight abort means the process to limit or restrict the hazards to public health and safety, and the safety of property, presented by a launch vehicle or reentry vehicle, including any payload, while in flight by initiating and accomplishing a controlled ending to vehicle flight. Flight abort crew means the personnel who make a flight abort decision. Flight abort rules means the conditions under which a flight safety system must abort the flight to ensure compliance with public safety criteria. * * * * * Flight hazard area means any region of land, sea, or air that must be surveyed, publicized, controlled, or evacuated in order to protect public health and safety and the safety of property. Flight safety limit means criteria to ensure that public safety is protected from the flight of a vehicle when a flight safety system functions properly. Flight safety system means a system used to implement flight abort. A human can be a part of a flight safety system. Gate means the portion of a flight safety limit boundary through which the tracking icon of a vehicle flown with a flight safety system may pass without flight abort, provided the flight remains within specified parameters. Hazard control means a preventative measure or mitigation put in place for systems or operations to reduce the severity of a hazard or the likelihood of the hazard occurring. * * * * * Instantaneous impact point means a predicted impact point, following thrust termination of a vehicle. Launch means to place or try to place a launch vehicle or reentry vehicle and any payload or human being from Earth in a suborbital trajectory, in Earth orbit in outer space, or otherwise in outer space, including activities involved in the preparation of a launch vehicle or payload for launch, when those activities take place at a launch site in the United States. * * * * * Launch or reentry system means the integrated set of subsystems, personnel, products, and processes that, when combined together, safely carries out a launch or reentry. * * * * * Launch window means a period of time during which the flight of a launch vehicle may be initiated. Liftoff means any motion of the launch vehicle with intention to initiate flight. Limits of a useful mission means the trajectory data or other parameters that describe the limits of a mission that can attain the primary objective, including flight azimuth limits. Mishap means any event, or series of events associated with a licensed or permitted activity, that meets the criteria of a Class 1, 2, 3 or 4 mishap. Mishap, Class 1 means any event resulting in one or more of the following: (1) A fatality or serious injury (as defined in 49 CFR 830.2) as a result of licensed or permitted activity to any person who is not associated with the licensed or permitted activity, including ground activities at a launch or reentry site; or (2) A fatality or serious injury to any space flight participant, crew, or government astronaut. Mishap, Class 2 means any event, other than a Class 1 mishap, resulting in one or more of the following: (1) A malfunction of a flight safety system or safety-critical system; or (2) A failure of the licensee's or permittee's safety organization, safety operations, safety procedures; or (3) High risk, as determined by the FAA, of causing a serious or fatal injury to any space flight participant, crew, government astronaut, or member of the public; or

[[Page 15415]]

(4) Substantial damage, as determined by the FAA, to property not associated with licensed or permitted activity. Mishap, Class 3 means any unplanned event, other than a Class 1 or Class 2 mishap, resulting in one or more of the following: (1) Permanent loss of a launch or reentry vehicle during licensed activity; or (2) The impact of a licensed or permitted launch or reentry vehicle, its payload, or any component thereof outside the planned landing site or designated hazard area. Mishap, Class 4 means an unplanned event, other than a Class 1, Class 2, or Class 3 mishap, resulting in one or more of the following: (1) Permanent loss of a vehicle during permitted activity; (2) Failure to achieve mission objectives; or (3) Substantial damage, as determined by the FAA, to property associated with licensed or permitted activity. Neighboring operations personnel means, as determined by the Federal or licensed launch or reentry site operator, those members of the public located within a launch or reentry site, or an adjacent launch or reentry site, who are not associated with a specific hazardous licensed or permitted operation currently being conducted but are required to perform safety, security, or critical tasks at the site and are notified of the operation. * * * * * Normal flight means the flight of a properly performing vehicle whose real-time vacuum instantaneous impact point does not deviate from the nominal vacuum instantaneous impact point by more than the sum of the wind effects and the three-sigma guidance and performance deviations in the uprange, downrange, left-crossrange, or right- crossrange directions. Normal trajectory means a trajectory that describes normal flight. Operating environment means an environment that a launch or reentry vehicle component will experience during its lifecycle. Operating environments include shock, vibration, thermal cycle, acceleration, humidity, and thermal vacuum. Operation hazard means a hazard created by an operating environment or by an unsafe act. * * * * * Operator means a holder of a license or permit under 51 U.S.C. Subtitle V, chapter 509. Orbital insertion means the point at which a vehicle achieves a minimum 70-nautical mile perigee based on a computation that accounts for drag. * * * * * Physical containment means a launch vehicle does not have sufficient energy for any hazards associated with its flight to reach the public or critical assets. * * * * * Probability of casualty means the likelihood that a person will suffer a serious injury or worse, including a fatal injury, due to all hazards from an operation at a specific location. Public means, for a particular licensed or permitted launch or reentry, people and property that are not involved in supporting the launch or reentry and includes those people and property that may be located within the launch or reentry site, such as visitors, individuals providing goods or services not related to launch or reentry processing or flight, and any other operator and its personnel. Reenter; reentry means to return or attempt to return, purposefully, a reentry vehicle and its payload or human being, if any, from Earth orbit or from outer space to Earth. * * * * * Reentry window means a period of time during which the reentry of a reentry vehicle may be initiated. * * * * * Safety critical means essential to safe performance or operation. A safety-critical system, subsystem, component, condition, event, operation, process, or item, is one whose proper recognition, control, performance, or tolerance, is essential to ensuring public safety. Service life means, for a safety-critical system component, the sum total of the component's storage life and operating life. * * * * * Software function means a collection of computer code that implements a requirement or performs an action. This includes firmware and operating systems. * * * * * State and United States means, when used in a geographical sense, the several States, the District of Columbia, the Commonwealth of Puerto Rico, American Samoa, the United States Virgin Islands, Guam, and any other commonwealth, territory, or possession of the United States. Sub-vehicle point means the location on an ellipsoidal Earth model where the normal to the ellipsoid passes through the vehicle's center of gravity. System hazard means a hazard associated with a system and generally exists even when no operation is occurring. * * * * * Toxic hazard area means a region on the Earth's surface where toxic concentrations and durations may be greater than approved toxic thresholds for acute casualty, in the event of a release during launch or reentry. Tracking icon means the representation of a vehicle's instantaneous impact point, debris footprint, or other vehicle performance metric used during real-time tracking of the vehicle's flight. Uncontrolled area is an area of land not controlled by a launch or reentry operator, a launch or reentry site operator, an adjacent site operator, or other entity by agreement. Unguided suborbital launch vehicle means a suborbital rocket that does not contain active guidance or a directional control system. * * * * * Uprange means the distance measured along a line that is 180 degrees to the downrange direction. * * * * * Vehicle response modes means mutually exclusive scenarios that characterize foreseeable combinations of vehicle trajectory and debris generation. * * * * * Wind weighting safety system means equipment, procedures, analysis and personnel functions used to determine the launcher elevation and azimuth settings that correct for wind effects that an unguided suborbital launch vehicle will experience during flight. Window closure means a period of time when launch or reentry is not permitted in order to avoid a collision with an object in orbit. A window closure may occur within a launch or reentry window, may delay the start of a window, or terminate a window early.

PART 404--REGULATIONS AND LICENSING REQUIREMENTS

0 3. The authority citation for part 404 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

0 4. Revise Sec. 404.5 to read as follows:

Sec. 404.5 Filing a petition for waiver.

(a) A petition for waiver must be submitted at least 60 days before the proposed effective date of the waiver, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15. (b) The petition for waiver must include: (1) The specific section or sections of this chapter from which the petitioner seeks relief;

[[Page 15416]]

(2) The extent of the relief sought and the reason the relief is being sought; (3) The reason why granting the request for relief is in the public interest and will not jeopardize the public health and safety, safety of property, and national security and foreign policy interests of the United States; and (4) Any additional facts, views, and data available to the petitioner to support the waiver request. 0 5. Add Sec. 404.15 to read as follows:

Sec. 404.15 Alternative time frames.

(a) General. Unless otherwise approved by the Administrator, an applicant, a licensee, a permittee, or a safety element approval holder must meet the time frames set forth in this chapter. (b) Request to change a time frame. A person may file a written request to the FAA to propose an alternative time frame to any of the time frames included in the sections listed in appendix A to this part. The request must be-- (1) Submitted no later than the specific time frame included in the regulation; and (2) Emailed to [email protected]; or (3) Mailed to the Federal Aviation Administration, Associate Administrator for Commercial Space Transportation, Room 331, 800 Independence Avenue SW, Washington, DC 20591. Attention: Alternative Time Frame Request. (c) Administrator review. The Administrator will review and make a decision or grant a request for an alternative time-frame as follows: (1) The FAA will conduct its review on a case-by-case basis, taking into account the complexity of the request and whether it allows sufficient time for the FAA to conduct its review and make the requisite public health and safety, safety of property, and national security and foreign policy findings; and (2) The FAA will provide its decision in writing. 0 6. Add appendix A to part 404 the read as follows:

Appendix A to Part 404--Alternative Time Frames

A404.1 GENERAL

Alternative time frames. This appendix lists the sections and corresponding paragraphs in this chapter that provide the eligible time frames for an applicant, licensee, permittee or a safety element approval holder, as applicable, to request an alternative time frame.

Table A404.1--Eligible Time Frames ------------------------------------------------------------------------ 49 CFR Paragraphs ------------------------------------------------------------------------ Sec. 404.5--Filing a petition for waiver...... (a) Sec. 413.23--License or permit renewal........ (a) Sec. 414.31--Safety element approval renewal.. (a) Sec. 420.57--Notifications.................... (d) Sec. 437.89--Preflight reporting.............. (a), (b) Sec. 440.15--Demonstration of compliance...... (a)(1), (a)(2), (a)(3), (a)(4) Sec. 450.169-- Launch and Reentry Collision (f)(1) Avoidance Analysis Requirements. Sec. 450.213--Preflight reporting............. (b), (c), (d), (e) Sec. 450.215--Post-flight reporting........... (a) ------------------------------------------------------------------------

PART 413--APPLICATION PROCEDURES

0 7. The authority citation for part 413 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

0 8. Revise the heading for part 413 to read as set forth above. 0 9. Revise Sec. 413.1 to read as follows:

Sec. 413.1 Scope of this part.

(a) This part explains how to apply for a license or experimental permit. These procedures apply to all applications for obtaining a license or permit, transferring a license, and renewing a license or permit. In this part, the term application means either an application in its entirety, or a portion of an application for incremental review and determination in accordance with Sec. 450.33 of this chapter. (b) Use the following table to locate specific requirements:

Table 1 to Paragraph (b) ------------------------------------------------------------------------ Subject Part ------------------------------------------------------------------------ License to Operate a Launch Site........................ 420 License to Operate a Reentry Site....................... 433 Experimental Permits.................................... 437 Launch And Reentry License Requirements................. 450 ------------------------------------------------------------------------

0 10. Amend Sec. 413.7 by revising the section heading and paragraph (a)(3) to read as follows:

Sec. 413.7 Application submission.

(a) * * * (3) For an application submitted by email, an applicant must send the application as an email attachment, or as a link to a secure server, to [email protected]. The application and the email to which the application is attached or linked must also satisfy the following criteria: (i) The email to which the application is attached or linked must be sent from an email address controlled by the person who signed the application or by an authorized representative of the applicant; (ii) The email must identify each document that is included as an attachment or that is stored on a secure server; and (iii) The electronic files must be date-stamped and have version control documentation. * * * * * 0 11. Amend Sec. 413.11 by revising paragraph (a) to read as follows:

Sec. 413.11 Acceptance of an application.

* * * * * (a) The FAA accepts the application and will initiate review; or * * * * *

[[Page 15417]]

0 12. Revise Sec. 413.15 to read as follows:

Sec. 413.15 Review period.

(a) Review period duration. Unless otherwise specified in this chapter, the FAA reviews and makes a license or permit determination on an application within 180 days of receiving an accepted license application or within 120 days of receiving an accepted permit application. The FAA will establish the time frame for any incremental review and determination with an applicant on a case-by-case basis during pre-application consultation. (b) Review period tolled. If an accepted application does not provide sufficient information to continue or complete the reviews or evaluations required by this chapter for a license, permit, or incremental determination, or an issue exists that would affect a determination, the FAA notifies the applicant, in writing, and informs the applicant of any information required to complete the application. If the FAA cannot review an accepted application because of lack of information or for any other reason, the FAA will toll the review period until the FAA receives the information it needs or the applicant resolves the issue. (c) Notice. Unless applying under incremental review and determination in accordance with Sec. 450.33 of this chapter, if the FAA does not make a decision within 120 days of receiving an accepted license application or within 90 days of receiving an accepted permit application, the FAA informs the applicant, in writing, of any outstanding information needed to complete the review, or of any issues that would affect the decision. 0 13. Amend Sec. 413.21 by revising the section heading and paragraphs (b) and (c) to read as follows:

Sec. 413.21 Denial of a license or permit application.

* * * * * (b) If the FAA has denied an application in its entirety, the applicant may either-- (1) Attempt to correct any deficiencies identified and ask the FAA to reconsider the revised application. The FAA has 60 days or the number of days remaining in the review period, whichever is greater, within which to reconsider the decision; or (2) Request a hearing in accordance with part 406 of this chapter, for the purpose of showing why the application should not be denied. (c) An applicant whose application is denied after reconsideration under paragraph (b)(1) of this section may request a hearing in accordance with paragraph (b)(2) of this section. 0 14. Revise part 414 to read as follows:

PART 414--SAFETY ELEMENT APPROVALS

Sec. Subpart A--General 414.1 Scope. 414.3 Definitions. 414.5 Applicability. 414.7 Eligibility. Subpart B--Application Procedures 414.9 Pre-application consultation. 414.11 Application. 414.13 Application separate from a vehicle operator license application. 414.15 Application concurrent with vehicle operator license application. 414.17 Confidentiality. 414.19 Processing the initial application.

414.21 Maintaining the continued accuracy of the initial application.

Subpart C--Safety Element Approval Review and Issuance 414.23 Technical criteria for reviewing a safety element approval application. 414.25 Terms and conditions for issuing a safety element approval; duration of a safety element approval. 414.27 Maintaining the continued accuracy of the safety element approval application. 414.29 Safety element approval records. 414.31 Safety element approval renewal. 414.33 Safety element approval transfer. 414.35 Monitoring compliance with the terms and conditions of a safety element approval. 414.37 Modification, suspension, or revocation of a safety element approval. 414.39 [Reserved] Subpart D--Appeal Procedures 414.41 Hearings in safety element approval actions. 414.43 Submissions; oral presentations in safety element approval actions. 414.45 Administrative law judge's recommended decision in safety element approval actions.

Authority: 51 U.S.C. 50901-50923.

Subpart A--General

Sec. 414.1 Scope.

This part establishes procedures for obtaining a safety element approval and renewing and transferring an existing safety element approval. Safety element approvals issued under this part may be used to support the application review for one or more vehicle operator license requests under other parts of this chapter.

Sec. 414.3 Definitions.

For purposes of this part the following definitions apply: Safety element approval. A safety element approval is an FAA document containing the FAA determination that one or more of the safety elements listed in paragraphs (1) and (2) of this definition, when used or employed within a defined envelope, parameter, or situation, will not jeopardize public health and safety or safety of property. A safety element approval may be issued independent of a license, and it does not confer any authority to conduct activities for which a license is required under this chapter. A safety element approval does not relieve its holder of the duty to comply with all applicable requirements of law or regulation that may apply to the holder's activities. (1) Launch vehicle, reentry vehicle, safety system, process, service, or any identified component thereof; or (2) Qualified and trained personnel, performing a process or function related to licensed activities or vehicles. Safety element. A safety element is any one of the items or persons (personnel) listed in paragraphs (1) and (2) of the definition of ``safety approval'' in this section.

Sec. 414.5 Applicability.

This part applies to an applicant that wants to obtain a safety element approval for any of the safety elements defined under this part and to persons granted a safety element approval under this part. Any person eligible under this part may apply to become the holder of a safety element approval.

Sec. 414.7 Eligibility.

(a) There is no citizenship requirement to obtain a safety element approval. (b) You may be eligible for a safety element approval if you are-- (1) A designer, manufacturer, or operator of a launch or reentry vehicle or component thereof; (2) The designer or developer of a safety system or process; or (3) Personnel who perform safety critical functions in conducting a licensed launch or reentry. (c) A safety element approval applicant must have sufficient knowledge and expertise to show that the design and operation of the safety element for which safety element approval is sought qualify for a safety element approval. (d) Only the safety elements defined under this part are eligible for a safety element approval. The applicant must consult with the FAA before submitting an application. Unless the applicant or the FAA requests another form of consultation, consultation is oral discussion with the FAA about the

[[Page 15418]]

application process and the potential issues relevant to the FAA's safety element approval decision.

Subpart B--Application Procedures

Sec. 414.9 Pre-application consultation.

The applicant must consult with the FAA before submitting an application. Unless the applicant or the FAA requests another form of consultation, consultation is oral discussion with the FAA about the application process and the potential issues relevant to the FAA's safety approval decision.

Sec. 414.11 Application.

An applicant may submit an application for a safety element approval in one of two ways: (a) Separate from a vehicle operator license application in accordance with Sec. 414.13; or (b) Concurrent with a vehicle operator license application in accordance with Sec. 414.15.

Sec. 414.13 Application separate from a vehicle operator license application.

(a) An applicant must make an application in writing and in English. The applicant must file the application with the Federal Aviation Administration either by paper, by use of physical electronic storage, or by email in the following manner: (1) For an application submitted on paper, an applicant must send two copies of the application to the Federal Aviation Administration, Associate Administrator for Commercial Space Transportation, Room 331, 800 Independence Avenue SW, Washington, DC 20591. Attention: Application Review. (2) For an application submitted by use of physical electronic storage, the applicant must either mail the application to the address specified in paragraph (a)(1) of this section or hand-deliver the application to an authorized FAA representative. The application and the physical electronic storage containing the application must also satisfy all of the following criteria: (i) The application must include a cover letter that is printed on paper and signed by the person who signed the application or by an authorized representative of the applicant; (ii) The cover letter must identify each document that is included on the physical electronic storage; and (iii) The physical electronic storage must be in a format such that its contents cannot be altered. (3) For an application submitted by email, an applicant must send the application as an email attachment, or as a link to a secure server, to [email protected]. The application and the email to which the application is attached must also satisfy the following criteria: (i) The email to which the application is attached must be sent from an email address controlled by the person who signed the application or by an authorized representative of the applicant; and (ii) The email must identify each document that is included as an attachment or that is stored on a secure server; and (iii) The electronic files must be date-stamped and have version control documentation. (b) The application must identify the following basic information: (1) Name and address of the applicant. (2) Name, address, and telephone number of any person to whom inquiries and correspondence should be directed. (3) Safety element as defined under this part for which the applicant seeks a safety element approval. (c) The application must contain the following technical information: (1) A Statement of Conformance letter, describing the specific criteria the applicant used to show the adequacy of the safety element for which a safety element approval is sought, and showing how the safety element complies with the specific criteria. (2) The specific operating limits for which the safety element approval is sought. (3) The following as applicable: (i) Information and analyses required under this chapter that may be applicable to demonstrating safe performance of the safety element for which the safety element approval is sought. (ii) Engineering design and analyses that show the adequacy of the proposed safety element for its intended use, such that the use in a licensed launch or reentry will not jeopardize public health or safety or the safety of property. (iii) Relevant manufacturing processes. (iv) Test and evaluation procedures. (v) Test results. (vi) Maintenance procedures. (vii) Personnel qualifications and training procedures. (d) The application must be legibly signed, dated, and certified as true, complete, and accurate by one of the following: (1) For a corporation, an officer or other individual authorized to act for the corporation in licensing or safety element approval matters. (2) For a partnership or a sole proprietorship, a general partner or proprietor, respectively. (3) For a joint venture, association, or other entity, an officer or other individual duly authorized to act for the joint venture, association, or other entity in licensing matters. (e) Failure to comply with any of the requirements set forth in this section is sufficient basis for denial of a safety element approval application.

Sec. 414.15 Application concurrent with vehicle operator license application.

(a) An applicant for a vehicle operator license may also identify one or more sections of its application for which it seeks to obtain a safety element approval concurrently with a license. An applicant applying for a safety element approval concurrently with a license must-- (1) Meet the applicable requirements of part 450 of this chapter; (2) Provide the information required in Sec. 414.13(b)(3) and (c)(2) and (3); and (3) Specify the sections of the license application that support its application for a safety element approval. (b) The scope of the safety element approval will be limited to what the application supports. The technical criteria for reviewing a safety element submitted as part of a vehicle operator license application are limited to the applicable requirements of part 450 of this chapter.

Sec. 414.17 Confidentiality.

(a) To ensure confidentiality of data or information in the application, the applicant must-- (1) Send a written request with the application that trade secrets or proprietary commercial or financial data be treated as confidential, and include in the request the specific time frame confidential treatment is required. (2) Mark data or information that require confidentiality with an identifying legend, such as ``Proprietary Information,'' ``Proprietary Commercial Information,'' ``Trade Secret,'' or ``Confidential Treatment Requested.'' Where this marking proves impracticable, attach a cover sheet that contains the identifying legend to the data or information for which confidential treatment is sought. (b) If the applicant requests confidential treatment for previously submitted data or information, the FAA will honor that request to the extent practicable in case of any prior distribution of the data or information. (c) Data or information for which confidential treatment is requested or data or information that qualifies for

[[Page 15419]]

exemption under 5 U.S.C. 552(b)(4) will not be disclosed to the public unless the Associate Administrator determines that withholding the data or information is contrary to the public or national interest.

Sec. 414.19 Processing the initial application.

(a) The FAA will initially screen an application to determine if the application is complete enough for the FAA to start its review. (b) After completing the initial screening, the FAA will inform the applicant in writing of one of the following: (1) The FAA accepts the application and will begin the reviews or evaluations required for a safety element approval determination under this part. (2) The FAA rejects the application because it is incomplete or indefinite making initiation of the reviews or evaluations required for a safety element approval determination under this part inappropriate. (c) The written notice will state the reason(s) for rejection and corrective actions necessary for the application to be accepted. The FAA may return a rejected application to the applicant or may hold it until the applicant provides more information. (d) The applicant may withdraw, amend, or supplement an application any time before the FAA makes a final determination on the safety element approval application by making a written request to the Associate Administrator. If the applicant amends or supplements the initial application, the revised application must meet all the applicable requirements under this part.

Sec. 414.21 Maintaining the continued accuracy of the initial application.

The applicant is responsible for the continuing accuracy and completeness of information provided to the FAA as part of the safety element approval application. If at any time after submitting the application, circumstances occur that cause the information to no longer be accurate and complete in any material respect, the applicant must submit a written statement to the Associate Administrator explaining the circumstances and providing the new or corrected information. The revised application must meet all requirements under Sec. 414.13 or Sec. 414.15.

Subpart C--Safety Element Approval Review and Issuance

Sec. 414.23 Technical criteria for reviewing a safety element approval application.

The FAA will determine whether a safety element is eligible for and may be issued a safety approval. We will base our determination on performance-based criteria, against which we may assess the effect on public health and safety and on safety of property, in the following hierarchy: (a) FAA or other appropriate Federal regulations. (b) Government-developed or adopted standards. (c) Industry consensus performance-based criteria or standard. (d) Applicant-developed criteria. Applicant-developed criteria are performance standards customized by the manufacturer that intends to produce the system, system component, or part. The applicant-developed criteria must define-- (1) Design and minimum performance; (2) Quality assurance system requirements; (3) Production acceptance test specifications; and (4) Continued operational safety monitoring system characteristics.

Sec. 414.25 Terms and conditions for issuing a safety element approval; duration of a safety approval.

(a) The FAA will issue a safety element approval to an applicant that meets all the requirements under this part. (b) The scope of the safety element approval will be limited by the scope of the safety demonstration contained in the application on which the FAA based the decision to grant the safety element approval. (c) The FAA will determine specific terms and conditions of a safety element approval individually, limiting the safety element approval to the scope for which it was approved. The terms and conditions will include reporting requirements tailored to the individual safety element approval. (d) A safety element approval is valid for five years and may be renewed.

Sec. 414.27 Maintaining the continued accuracy of the safety element approval application.

(a) The holder of a safety element approval must ensure the continued accuracy and completeness of representations contained in the safety element approval application, on which the approval was issued, for the entire term of the safety element approval. (b) If any representation contained in the application that is material to public health and safety or safety of property ceases to be accurate and complete, the safety element approval holder must prepare and submit a revised application according to Sec. 414.13 or Sec. 414.15. The safety element approval holder must point out any part of the safety element approval or the associated application that would be changed or affected by a proposed modification. The FAA will review and make a determination on the revised application under the terms of this part.

Sec. 414.29 Safety element approval records.

The holder of a safety element approval must maintain all records necessary to verify that the holder's activities are consistent with the representations contained in the application for which the approval was issued for the duration of the safety element approval plus one year.

Sec. 414.31 Safety element approval renewal.

(a) Eligibility. A holder of a safety element approval may apply to renew it by sending the FAA a written application at least 90 days before the expiration date of the approval, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter. (b) Application. (1) A safety element approval renewal application must meet all the requirements under Sec. 414.13 or Sec. 414.15. (2) The application may incorporate by reference information provided as part of the application for the expiring safety element approval or any modification to that approval. (3) Any proposed changes in the conduct of a safety element for which the FAA has issued a safety element approval must be described and must include any added information necessary to support the fitness of the proposed changes to meet the criteria upon which the FAA evaluated the safety element approval application. (c) Review of application. The FAA conducts the reviews required under this part to determine whether the safety element approval may be renewed. We may incorporate by reference any findings that are part of the record for the expiring safety element approval. (d) Grant of safety element approval renewal. If the FAA makes a favorable safety element approval determination, the FAA issues an order that amends the expiration date of the safety element approval or issues a new safety element approval. The FAA may impose added or revised terms and conditions

[[Page 15420]]

necessary to protect public health and safety and the safety of property. (e) Written notice. The FAA will provide written notice to the applicant of our determination on the safety element approval renewal request. (f) Denial of a safety element approval renewal. If the FAA denies the renewal application, the applicant may correct any deficiency the FAA identified and request a reconsideration of the revised application. The applicant also has the right to appeal a denial as set forth in subpart D of this part.

Sec. 414.33 Safety element approval transfer.

(a) Only the FAA may approve a transfer of a safety element approval. (b) Either the holder of a safety element approval or the prospective transferee may request a safety element approval transfer. (c) Both the holder and prospective transferee must agree to the transfer. (d) The person requesting the transfer must submit a safety element approval application according to Sec. 414.13 or Sec. 414.15, must meet the applicable requirements of this part, and may incorporate by reference relevant portions of the initial application. (e) The FAA will approve a transfer of a safety element approval only after all the approvals and determinations required under this chapter for a safety element approval have been met. In conducting reviews and issuing approvals and determinations, the FAA may incorporate by reference any findings made part of the record to support the initial safety element approval determination. The FAA may modify the terms and conditions of a safety element approval to reflect any changes necessary because of a safety element approval transfer. (f) The FAA will provide written notice to the person requesting the safety element approval transfer of our determination.

Sec. 414.35 Monitoring compliance with the terms and conditions of a safety element approval.

Each holder of a safety element approval must allow access by, and cooperate with, Federal officers or employees or other individuals authorized by the Associate Administrator to inspect manufacturing, production, testing, or assembly performed by a holder of a safety element approval or its contractor. The FAA may also inspect a safety element approval process or service, including training programs and personnel qualifications.

Sec. 414.37 Modification, suspension, or revocation of a safety element approval.

(a) The safety element approval holder. The safety element approval holder may submit an application to the FAA to modify the terms and conditions of the holder's safety element approval. The application must meet all the applicable requirements under this part. The FAA will review and make a determination on the application using the same procedures under this part applicable to an initial safety element approval application. If the FAA denies the request to modify a safety element approval, the holder may correct any deficiency the FAA identified and request reconsideration. The holder also has the right to appeal a denial as set forth in subpart D of this part. (b) The FAA. If the FAA finds it is in the interest of public health and safety, safety of property, or if the safety element approval holder fails to comply with any applicable requirements of this part, any terms and conditions of the safety approval, or any other applicable requirement, the FAA may-- (1) Modify the terms and conditions of the safety element approval; or (2) Suspend or revoke the safety element approval. (c) Effective date. Unless otherwise stated by the FAA, any modification, suspension, or revocation of a safety element approval under paragraph (b) of this section-- (1) Takes effect immediately; and (2) Continues in effect during any reconsideration or appeal of such action under this part. (d) Notification and Right to Appeal. If the FAA determines it is necessary to modify, suspend, or revoke a safety element approval, we will notify the safety element approval holder in writing. If the holder disagrees with the FAA's determination, the holder may correct any deficiency the FAA identified and request a reconsideration of the determination. The applicant also has the right to appeal the determination as set forth in subpart D of this part.

Sec. 414.39 [Reserved]

Subpart D--Appeal Procedures

Sec. 414.41 Hearings in safety element approval actions.

(a) The FAA will give the safety element approval applicant or holder, as appropriate, written notice stating the reason for issuing a denial or for modifying, suspending, or revoking a safety element approval under this part. (b) A safety element approval applicant or holder is entitled to a determination on the record after an opportunity for a hearing.

Sec. 414.43 Submissions; oral presentations in safety element approval actions.

(a) Determinations in safety element approval actions under this part will be made on the basis of written submissions unless the administrative law judge, on petition or on his or her own initiative, determines that an oral presentation is required. (b) Submissions must include a detailed exposition of the evidence or arguments supporting the petition. (c) Petitions must be filed as soon as practicable, but in no event more than 30 days after issuance of decision or finding under Sec. 414.37.

Sec. 414.45 Administrative law judge's recommended decision in safety element approval actions.

(a) The Associate Administrator, who will make the final decision on the matter at issue, will review the recommended decision of the administrative law judge. The Associate Administrator will make such final decision within 30 days of issuance of the recommended decision. (b) The authority and responsibility to review and decide rests solely with the Associate Administrator and may not be delegated.

PART 415 [REMOVE AND RESERVE]

0 15. Remove and reserve part 415.

PART 417 [REMOVE AND RESERVE]

0 16. Remove and reserve part 417.

PART 420--LICENSE TO OPERATE A LAUNCH SITE

0 17. The authority citation for part 420 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

Sec. 420.5 [Amended]

0 18. Amend Sec. 420.5 by removing the definitions for ``Instantaneous impact point,'' ``Launch site accident,'' and ``Public.'' 0 19. Amend Sec. 420.15 by revising paragraph (b) to read as follows:

Sec. 420.15 Information requirements.

* * * * * (b) Environmental. The FAA is responsible for complying with the procedures and policies of the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders prior to issuing a launch site license. An applicant must provide the FAA with information needed to comply with such requirements. The FAA will

[[Page 15421]]

consider and document the potential environmental effects associated with issuing a launch site license. (1) Environmental Impact Statement or Environmental Assessment. An applicant must-- (i) Prepare an Environmental Assessment with FAA oversight; (ii) Assume financial responsibility for preparation of an Environmental Impact Statement by an FAA-selected and -managed consultant contractor; or (iii) Submit a written re-evaluation of a previously submitted Environmental Assessment or Environmental Impact Statement when requested by the FAA. (2) Categorical exclusion. An applicant may request a categorical exclusion determination from the FAA by submitting the request and supporting rationale. (3) Environmental information. An application must include an approved FAA Environmental Assessment, Environmental Impact Statement, categorical exclusion determination, or written re-evaluation covering all planned licensed activities in compliance with NEPA and the Council on Environmental Quality Regulations for Implementing the Procedural Provisions of NEPA. * * * * * 0 20. Revise Sec. 420.51 to read as follows:

Sec. 420.51 Responsibilities--general.

A licensee must operate its launch site in accordance with the representations in its application. 0 21. Amend Sec. 420.57 by revising paragraph (d) to read as follows:

Sec. 420.57 Notifications.

* * * * * (d) At least 2 days prior to flight of a launch vehicle, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter, the licensee must notify local officials and all owners of land adjacent to the launch site of the flight schedule. 0 22. Revise Sec. 420.59 to read as follows:

Sec. 420.59 Mishap plan.

(a) A licensee must submit a mishap response plan that meets the requirements of Sec. 450.173 of this chapter. (b) A launch site operator's mishap plan must also contain-- (1) Procedures for participating in an investigation of a launch mishap for launches launched from the launch site; and (2) Require the licensee to cooperate with FAA or National Transportation Safety Board (NTSB) investigations of a mishap for launches launched from the launch site. (c) Emergency response and investigation procedures developed in accordance with 29 CFR 1910.119 and 40 CFR part 68 will satisfy the requirements of Sec. 450.173(d) and (e) to the extent that they include the elements required by Sec. 450.173(d) and (e).

PART 431 [REMOVE AND RESERVE]

0 23. Remove and reserve part 431.

PART 433--LICENSE TO OPERATE A REENTRY SITE

0 24. The authority citation for part 433 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

0 25. Revise Sec. 433.7 to read as follows:

Sec. 433.7 Environmental.

(a) General. The FAA is responsible for complying with the procedures and policies of the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders prior to issuing a reentry site license. An applicant must provide the FAA with information needed to comply with such requirements. The FAA will consider and document the potential environmental effects associated with issuing a license for a reentry site. (b) Environmental Impact Statement or Environmental Assessment. An applicant must-- (1) Prepare an Environmental Assessment with FAA oversight; (2) Assume financial responsibility for preparation of an Environmental Impact Statement by an FAA-selected and -managed consultant contractor; or (3) Submit a written re-evaluation of a previously submitted Environmental Assessment or Environmental Impact Statement when requested by the FAA. (c) Categorical exclusion. An applicant may request a categorical exclusion determination from the FAA by submitting the request and supporting rationale. (d) Environmental information. An application must include an approved FAA Environmental Assessment, Environmental Impact Statement, categorical exclusion determination, or written re-evaluation covering all planned licensed activities in compliance with NEPA and the Council on Environmental Quality Regulations for Implementing the Procedural Provisions of NEPA.

Sec. 433.9 [Removed and Reserved]

0 26. Remove and reserve Sec. 433.9.

PART 435 [REMOVED AND RESERVED]

0 27. Remove and reserve part 435.

PART 437--EXPERIMENTAL PERMITS

0 28. The authority citation for part 437 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

Sec. 437.3 [Amended]

0 29. Amend Sec. 437.3 by removing the definition for ``Anomaly.'' 0 30. Amend Sec. 437.21 by revising paragraphs (b) and (c) to read as follows:

Sec. 437.21 General.

* * * * * (b) Other regulations--(1) Environmental--(i) General. The FAA is responsible for complying with the procedures and policies of the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders to consider and document the potential environmental effects associated with proposed reusable suborbital rocket launches or reentries. An applicant must provide the FAA with information needed to comply with such requirements. The FAA will consider and document the potential environmental effects associated with proposed reusable suborbital rocket launches or reentries. (ii) Environmental Impact Statement or Environmental Assessment. An applicant must-- (A) Prepare an Environmental Assessment with FAA oversight; (B) Assume financial responsibility for preparation of an Environmental Impact Statement by an FAA-selected and -managed consultant contractor; or (C) Submit a written re-evaluation of a previously submitted Environmental Assessment or Environmental Impact Statement when requested by the FAA. (iii) Categorical exclusion. An applicant may request a categorical exclusion determination from the FAA by submitting the request and supporting rationale. (iv) Information requirements. An application must include an approved FAA Environmental Assessment, Environmental Impact Statement, categorical exclusion determination, or written re-evaluation covering all planned licensed activities in compliance with NEPA and the Council on Environmental Quality Regulations for Implementing the Procedural Provisions of NEPA. (2) Financial responsibility. An applicant must provide the information required by part 3 of appendix A of part 440 of this chapter for the FAA to

[[Page 15422]]

conduct a maximum probable loss analysis. (3) Human space flight. An applicant proposing launch or reentry with flight crew or a space flight participant on board a reusable suborbital rocket must demonstrate compliance with Sec. Sec. 460.5, 460.7, 460.11, 460.13, 460.15, 460.17, 460.51 and 460.53 of this subchapter. (c) Use of a safety element approval. If an applicant proposes to use any reusable suborbital rocket, safety system, process, service, or personnel for which the FAA has issued a safety element approval under part 414 of this chapter, the FAA will not reevaluate that safety element to the extent its use is within its approved envelope. As part of the application process, the FAA will evaluate the integration of that safety element into vehicle systems or operations. * * * * * 0 31. Revise Sec. 437.41 to read as follows:

Sec. 437.41 Mishap plan.

An applicant must submit a mishap plan that meets the requirements of Sec. 450.173 of this chapter. 0 32. Revise Sec. 437.65 to read as follows:

Sec. 437.65 Collision avoidance analysis.

For a permitted flight with a planned maximum altitude greater than 150 kilometers, a permittee must obtain a collision avoidance analysis in accordance with Sec. 450.169 of this chapter.

Sec. 437.75 [Removed and Reserved]

0 33. Remove and reserve Sec. 437.75. 0 34. Amend Sec. 437.89 by: 0 a. Revising paragraph (a) introductory text; 0 b. In paragraphs (a)(1) through (3), removing the comma at the end of the paragraphs and adding a semicolon in its place; and 0 c. Revise paragraph (b). The revisions read as follows:

Sec. 437.89 Pre-flight reporting.

(a) Not later than 30 days before each flight or series of flights conducted under an experimental permit, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter, a permittee must provide the FAA with the following information: * * * * * (b) Not later than 15 days before each permitted flight planned to reach greater than 150 km altitude, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15, a of this chapter permittee must provide the FAA its planned trajectory for a collision avoidance analysis.

PART 440--FINANCIAL RESPONSIBILITY

0 35. The authority citation for part 440 continues to read as follows:

Authority: 51 U.S.C. 50901-50923.

0 36. Amend Sec. 440.3 by revising the definition for ``Maximum probable loss'' to read as follows:

Sec. 440.3 Definitions.

* * * * * Maximum probable loss (MPL) means the greatest dollar amount of loss for bodily injury or property damage that is reasonably expected to result from a licensed or permitted activity: (1) Losses to third parties, excluding Government personnel and other launch or reentry participants' employees involved in licensed or permitted activities and neighboring operations personnel, that are reasonably expected to result from a licensed or permitted activity are those that have a probability of occurrence of no less than one in ten million. (2) Losses to Government property and Government personnel involved in licensed or permitted activities and neighboring operations personnel that are reasonably expected to result from licensed or permitted activities are those that have a probability of occurrence of no less than one in one hundred thousand. * * * * * 0 37. Amend Sec. 440.15 by revising paragraphs (a)(1) through (4) to read as follows:

Sec. 440.15 Demonstration of compliance.

(a) * * * (1) All reciprocal waiver of claims agreements required under Sec. 440.17(c) must be submitted at least 30 days before the start of any licensed or permitted activity involving a customer, crew member, or space flight participant; unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter; (2) Evidence of insurance must be submitted at least 30 days before commencement of any licensed launch or permitted activity, and for licensed reentry no less than 30 days, before commencement of launch activities involving the reentry licensee, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter; (3) Evidence of financial responsibility in a form other than insurance, as provided under Sec. 440.9(f) must be submitted at least 60 days before commencement of a licensed or permitted activity, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter; and (4) Evidence of renewal of insurance or other form of financial responsibility must be submitted at least 30 days in advance of its expiration date, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter. * * * * * 0 38. Add part 450 to read as follows:

PART 450--LAUNCH AND REENTRY LICENSE REQUIREMENTS

Sec. Subpart A--General Information 450.1 Applicability. 450.3 Scope of a vehicle operator license. 450.5 Issuance of a vehicle operator license. 450.7 Duration of a vehicle operator license. 450.9 Additional license terms and conditions. 450.11 Transfer of a vehicle operator license. 450.13 Rights not conferred by a vehicle operator license. Subpart B--Requirements to Obtain a Vehicle Operator License 450.31 General. 450.33 Incremental review and determinations. 450.35 Accepted means of compliance. 450.37 Equivalent level of safety. 450.39 Use of safety element approval. 450.41 Policy review and approval. 450.43 Payload review and determination. 450.45 Safety review and approval. 450.47 Environmental review. Subpart C--Safety Requirements

Public Safety Criteria

450.101 Public safety criteria.

System Safety Program

450.103 System safety program.

Preliminary Safety Assessment for Flight and Hazard Control Strategies

450.105 Preliminary safety assessment for flight. 450.107 Hazard control strategies.

Flight Hazard Analyses for Hardware and Software

450.109 Flight hazard analysis. 450.111 Computing systems and software.

Flight Safety Analyses

450.113 Flight safety analysis requirements--scope and applicability. 450.115 Flight safety analysis methods. 450.117 Trajectory analysis for normal flight. 450.119 Trajectory analysis for malfunction flight. 450.121 Debris analysis. 450.123 Flight safety limits analysis. 450.125 Gate analysis. 450.127 Data loss Flight time and planned safe flight state analyses.

[[Page 15423]]

450.129 Time delay analysis. 450.131 Probability of failure analysis. 450.133 Flight hazard area analysis. 450.135 Debris risk analysis. 450.137 Far-field overpressure blast effects analysis. 450.139 Toxic hazards for flight. 450.141 Wind weighting for the flight of an unguided suborbital launch vehicle.

Prescribed Hazard Controls

450.143 Safety-critical system design, test, and documentation. 450.145 Flight safety system. 450.147 Agreements. 450.149 Safety-critical personnel qualifications. 450.151 Work shift and rest requirements. 450.153 Radio frequency management. 450.155 Readiness. 450.157 Communications. 450.159 Preflight procedures. 450.161 Surveillance and publication of hazard areas. 450.163 Lightning hazard mitigation. 450.165 Flight safety rules. 450.167 Tracking. 450.169 Launch and reentry collision avoidance analysis requirements. 450.171 Safety at end of launch. 450.173 Mishap plan--reporting, response, and investigation requirements. 450.175 Test-induced damage. 450.177 Unique Policies, requirements, and practices.

Ground Safety

450.179 Ground safety--general. 450.181 Coordination with a site operator. 450.183 Explosive site plan. 450.185 Ground hazard analysis. 450.187 Toxic hazards mitigation for ground operations. 450.189 Ground safety prescribed hazard controls. Subpart D--Terms and Conditions of a Vehicle Operator License. 450.201 Public safety responsibility. 450.203 Compliance with license. 450.205 Financial responsibility requirements. 450.207 Human Spaceflight Requirements. 450.209 Compliance monitoring. 450.211 Continuing accuracy of license application; application for modification of license. 450.213 Preflight reporting. 450.215 Post-flight reporting. 450.217 Registration of space objects. 450.219 Records. Appendix A to Part 450--Collision Analysis Worksheet

Authority: 51 U.S.C. 50901-50923.

Subpart A--General Information

Sec. 450.1 Applicability.

(a) General. This part prescribes requirements for obtaining and maintaining a license to launch, reenter, or both launch and reenter, a launch or reentry vehicle. (b) Grandfathering. Except for Sec. Sec. 450.169 and 450.101(a)(4) and (b)(4), this part does not apply to any launch or reentry that an operator elects to conduct pursuant to a license issued by the FAA or an application accepted by the FAA no later than [EFFECTIVE DATE OF FINAL RULE]. The Administrator will determine the applicability of this part to an application for a license modification submitted after [EFFECTIVE DATE OF FINAL RULE] on a case-by-case basis.

Sec. 450.3 Scope of a vehicle operator license.

(a) A vehicle operator license authorizes a licensee to conduct one or more launches or reentries using the same vehicle or family of vehicles. A vehicle operator license identifies the scope of authorization as defined in paragraphs (b) and (c) of this section or as agreed to by the Administrator. (b) A vehicle operator license authorizes launch, which includes the flight of a launch vehicle and pre- and post-flight ground operations as follows: (1) Launch begins when hazardous preflight ground operations commence at a U.S. launch site that pose a threat to the public. Unless a later point is agreed to by the Administrator, hazardous preflight ground operations commence when a launch vehicle or its major components arrive at a U.S. launch site. (2) At a non-U.S. launch site, launch begins at ignition or at the first movement that initiates flight, whichever occurs earlier. (3) Launch ends when any of the following events occur: (i) For an orbital launch of a vehicle without a reentry of the vehicle, launch ends after the licensee's last exercise of control over its vehicle on orbit, after vehicle stage impact on Earth, after activities necessary to return the vehicle or stage to a safe condition on the ground after landing, or after activities necessary to return the site to a safe condition, whichever occurs later; (ii) For an orbital launch of a vehicle with a reentry of the vehicle, launch ends after deployment of all payloads, upon completion of the vehicle's first steady-state orbit if there is no payload, or after activities necessary to return the site to a safe condition, whichever occurs later; (iii) For a suborbital launch that includes a reentry, launch ends after reaching apogee; or (iv) For a suborbital launch that does not include a reentry, launch ends after the vehicle or vehicle component impact on Earth, after activities necessary to return the vehicle or vehicle component to a safe condition on the ground after landing, or after activities necessary to return the site to a safe condition, whichever occurs later. (c) A vehicle operator's license authorizes reentry, which includes activities conducted in Earth orbit or outer space to determine reentry readiness and that are critical to ensuring public health and safety and the safety of property during reentry flight. Reentry also includes activities necessary to return the reentry vehicle to a safe condition on the ground after landing.

Sec. 450.5 Issuance of a vehicle operator license.

(a) The FAA issues a vehicle operator license to an applicant who has obtained all approvals and determinations required under this part for a license. (b) A vehicle operator license authorizes a licensee to conduct launches or reentries, in accordance with the representations contained in the licensee's application, with subparts C and D of this part, and subject to the licensee's compliance with terms and conditions contained in license orders accompanying the license, including financial responsibility requirements.

Sec. 450.7 Duration of a vehicle operator license.

A vehicle operator license is valid for the period of time determined by the Administrator as necessary to conduct the licensed activity but may not exceed 5 years from the issuance date.

Sec. 450.9 Additional license terms and conditions.

The FAA may modify a vehicle operator license at any time by modifying or adding license terms and conditions to ensure compliance with the Act (as defined in Sec. 401.5 of this chapter) and its implementing regulations in this chapter.

Sec. 450.11 Transfer of a vehicle operator license.

(a) Only the FAA may transfer a vehicle operator license. (b) An applicant for transfer of a vehicle operator license must submit a license application in accordance with part 413 of this chapter and must meet the requirements of part 450 of this chapter. The FAA will transfer a license to an applicant that has obtained all of the approvals and determinations required under this part for a license. In conducting its reviews and issuing approvals and determinations, the FAA may incorporate by reference any findings made part of the record to support the initial licensing determination. The FAA may modify a

[[Page 15424]]

license to reflect any changes necessary as a result of a license transfer.

Sec. 450.13 Rights not conferred by a vehicle operator license.

Issuance of a vehicle operator license does not relieve a licensee of its obligation to comply with all applicable requirements of law or regulation that may apply to its activities, nor does issuance confer any proprietary, property or exclusive right in the use of any Federal launch range or related facilities, airspace, or outer space.

Subpart B--Requirements to Obtain a Vehicle Operator License

Sec. 450.31 General.

(a) To obtain a vehicle operator license, an applicant must-- (1) Submit a license application in accordance with the procedures in part 413 of this chapter; (2) Obtain a policy approval from the Administrator in accordance with Sec. 450.41; (3) Obtain a favorable payload determination from the Administrator in accordance with Sec. 450.43; (4) Obtain a safety approval from the Administrator in accordance with Sec. 450.45; (5) Satisfy the environmental review requirements of Sec. 450.47; and (6) Provide the information required by appendix A of part 440 of this chapter for the Administrator to conduct a maximum probable loss analysis for the applicable licensed operation. (b) An applicant may apply for the approvals and determinations in paragraphs (a)(2) through (6) of this section separately or all together in one complete application, using the application procedures contained in part 413 of this chapter. (c) An applicant may also apply for a safety approval in an incremental manner, in accordance with Sec. 450.33. (d) An applicant may reference materials previously provided as part of a license application in order to meet the application requirements of this part.

Sec. 450.33 Incremental review and determinations.

An applicant may submit its application for a safety review incrementally using an approach approved by the Administrator. (a) An applicant must identify to the Administrator, prior to submitting an application, whether it will submit an incremental application for any approval or determination. (b) An applicant using an incremental approach must have the approach approved by the Administrator prior to submitting an application. (c) The Administrator may make incremental determinations as part of this review process.

Sec. 450.35 Accepted means of compliance.

(a) An applicant must demonstrate compliance with applicable sections of this part using a means of compliance accepted by the Administrator. These applicable sections specify that only an accepted means of compliance can be used to demonstrate compliance. (b) The FAA will provide public notice of each means of compliance that the Administrator has accepted. (c) An applicant requesting acceptance of an alternative means of compliance must submit the alternative means of compliance to the FAA in a form and manner acceptable to the Administrator.

Sec. 450.37 Equivalent level of safety.

(a) An applicant must demonstrate compliance with each requirement of this part, unless the applicant clearly and convincingly demonstrates that an alternative approach provides an equivalent level of safety to the requirement of this part. (b) Paragraph (a) of this section does not apply to the requirements of Sec. 450.101.

Sec. 450.39 Use of safety element approval.

If an applicant proposes to use any vehicle, safety system, process, service, or personnel for which the FAA has issued a safety element approval under part 414 of this chapter, the FAA will not reevaluate that safety element during a license application evaluation to the extent its use is within its approved envelope.

Sec. 450.41 Policy review and approval.

(a) General. The FAA issues a policy approval to an applicant unless the FAA determines that a proposed launch or reentry would jeopardize U.S. national security or foreign policy interests, or international obligations of the United States. (b) Interagency consultation. (1) The FAA consults with the Department of Defense to determine whether a license application presents any issues affecting U.S. national security. (2) The FAA consults with the Department of State to determine whether a license application presents any issues affecting U.S. foreign policy interests or international obligations. (3) The FAA consults with other Federal agencies, including the National Aeronautics and Space Administration, authorized to address issues identified under paragraph (a) of this section, associated with an applicant's proposal. (c) Issues during policy review. The FAA will advise an applicant, in writing, of any issue raised during a policy review that would impede issuance of a policy approval. The applicant may respond, in writing, or amend its license application as required by Sec. 413.17 of this chapter. (d) Denial of policy approval. The FAA notifies an applicant, in writing, if it has denied policy approval for a license application. The notice states the reasons for the FAA's determination. The applicant may respond in writing to the reasons for the determination and request reconsideration in accordance with Sec. 413.21 of this chapter. (e) Application requirements for policy review. In its license application, an applicant must-- (1) Identify the model, type, and configuration of any vehicle proposed for launch or reentry by the applicant; (2) Describe the vehicle by characteristics that include individual stages, their dimensions, type and amounts of all propellants, and maximum thrust; (3) Identify foreign ownership of the applicant as follows: (i) For a sole proprietorship or partnership, identify all foreign ownership; (ii) For a corporation, identify any foreign ownership interests of 10 percent or more; and (iii) For a joint venture, association, or other entity, identify any participating foreign entities; and (4) Identify proposed vehicle flight profile, including: (i) Launch or reentry site, including any contingency abort locations; (ii) Flight azimuths, trajectories, and associated ground tracks and instantaneous impact points for the duration of the licensed activity, including any contingency abort profiles; (iii) Sequence of planned events or maneuvers during flight; (iv) Normal impact or landing areas for all mission hardware; and (v) For each orbital mission, the range of intermediate and final orbits of each vehicle upper stage and their estimated orbital lifetimes.

Sec. 450.43 Payload review and determination.

(a) General. The FAA issues a favorable payload determination for a launch or reentry to a license applicant or payload owner or operator if-- (1) The applicant, payload owner, or payload operator has obtained all required licenses, authorizations, and permits; and

[[Page 15425]]

(2) Its launch or reentry would not jeopardize public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States. (b) Relationship to other executive agencies. The FAA does not make a determination under paragraph (a)(2) of this section for-- (1) Those aspects of payloads that are subject to regulation by the Federal Communications Commission or the Department of Commerce; or (2) Payloads owned or operated by the U.S. Government. (c) Classes of payloads. The FAA may review and issue findings regarding a proposed class of payload, including communications, remote sensing, or navigation. However, prior to a launch or reentry, each payload is subject to verification by the FAA that its launch or reentry would not jeopardize public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States. (d) Payload owner or payload operator may apply. In addition to a launch or reentry operator, a payload owner or payload operator may request a payload review and determination. (e) Interagency consultation. The FAA consults with other agencies as follows: (1) The Department of Defense to determine whether launch or reentry of a proposed payload or payload class would present any issues affecting U.S. national security; (2) The Department of State to determine whether launch or reentry of a proposed payload or payload class would present any issues affecting U.S. foreign policy interests or international obligations; or (3) Other Federal agencies, including the National Aeronautics and Space Administration, authorized to address issues of public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States, associated with the launch or reentry of a proposed payload or payload class. (f) Issues during payload review. The FAA will advise a person requesting a payload determination, in writing, of any issue raised during a payload review that would impede issuance of a license to launch or reenter that payload or payload class. The person requesting payload review may respond, in writing, or amend its application as required by Sec. 413.17 of this chapter. (g) Denial of a payload determination. The FAA notifies an applicant, in writing, if it has denied a favorable payload determination. The notice states the reasons for the FAA's determination. The applicant may respond in writing to the reasons for the determination and request reconsideration in accordance with Sec. 413.21 of this chapter. (h) Incorporation of payload determination in license application. A favorable payload determination issued for a payload or class of payload may be included by a license applicant as part of its application. However, any change in information provided under paragraph (i) of this section must be reported in accordance with Sec. 413.17 of this chapter. The FAA determines whether a favorable payload determination remains valid in light of reported changes and may conduct an additional payload review. (i) Application requirements. A person requesting review of a particular payload or payload class must identify the following: (1) For launch of a payload: (i) Payload name or class, and function; (ii) Description, including physical dimensions, weight, composition, and any hosted payloads; (iii) Payload owner and payload operator, if different from the person requesting payload review and determination, (iv) Any foreign ownership of the payload or payload operator, as specified in Sec. 450.41(e)(3); (v) Hazardous materials as defined in Sec. 401.5 of this chapter, radioactive materials, and the amounts of each; (vi) Explosive potential of payload materials, alone and in combination with other materials found on the payload; (vii) For orbital launches, parameters for parking, transfer and final orbits, and approximate transit times to final orbit; (viii) Delivery point in flight at which the payload will no longer be under the licensee's control; (ix) Intended operations during the lifetime of the payload, including anticipated life span and any planned disposal; (x) Any encryption associated with data storage on the payload and transmissions to or from the payload; and (xi) Any other information necessary to make a determination based on public health and safety, safety of property, U.S. national security or foreign policy interests, or international obligations of the United States; or (2) For reentry of a payload: (i) Payload name or class and function; (ii) Physical characteristics, dimensions, and weight of the payload; (iii) Payload owner and payload operator, if different from the person requesting the payload review and determination; (iv) Type, amount, and container of hazardous materials and radioactive materials in the payload; (v) Explosive potential of payload materials, alone and in combination with other materials found on the payload or reentry vehicle during reentry; and (vi) Designated reentry site.

Sec. 450.45 Safety review and approval.

(a) General. The FAA issues a safety approval to an applicant if it determines that an applicant can conduct launch or reentry without jeopardizing public health and safety and safety of property. A license applicant must satisfy the application requirements in this section and subpart C of this part. (b) Services or property provided by a Federal launch range. The FAA will accept any safety-related launch or reentry service or property provided by a Federal launch range or other Federal entity by contract, as long as the FAA determines that the launch or reentry services or property provided satisfy this part. (c) Issues during safety review. The FAA will advise an applicant, in writing, of any issues raised during a safety review that would impede issuance of a safety approval. The applicant may respond, in writing, or amend its license application as required by Sec. 413.17 of this chapter. (d) Denial of a safety approval. The FAA notifies an applicant, in writing, if it has denied a safety approval for a license application. The notice states the reasons for the FAA's determination. The applicant may respond in writing to the reasons for the determination and request reconsideration in accordance with Sec. 413.21 of this chapter. (e) Application requirements. An applicant must submit the application requirements information in subpart C of this part, as well as the following: (1) General. An application must-- (i) Contain a glossary of unique terms and acronyms used in alphabetical order; (ii) Contain a listing of all referenced material; (iii) Use equations and mathematical relationships derived from or referenced to a recognized standard or text, and define all algebraic parameters; (iv) Include the units of all numerical values provided; and (v) Include a legend or key that identifies all symbols used for any schematic diagrams. (2) Site description. An applicant must identify the proposed launch or

[[Page 15426]]

reentry site, including contingency abort locations, and submit the following: (i) Boundaries of the site; (ii) Launch or landing point locations, including latitude and longitude; (iii) Identity of any site operator; and (iv) Identity of any facilities at the site that will be used for pre- or post-flight ground operations. (3) Vehicle description. An applicant must submit the following: (i) A written description of the vehicle or family of vehicles, including structural, thermal, pneumatic, propulsion, electrical, and avionics and guidance systems used in each vehicle, and all propellants. The description must include a table specifying the type and quantities of all hazardous materials on each vehicle and must include propellants, explosives, and toxic materials; and (ii) A drawing of each vehicle that identifies: (A) Each stage, including strap-on motors; (B) Physical dimensions and weight; (C) Location of all safety-critical systems; (D) Location of all major vehicle control systems, propulsion systems, pressure vessels, and any other hardware that contains potential hazardous energy or hazardous material; and (E) For an unguided suborbital launch vehicle, the location of the rocket's center of pressure in relation to its center of gravity for the entire flight profile. (4) Mission schedule. An applicant must submit a generic launch or reentry processing schedule that identifies any readiness activities, such as reviews and rehearsals, and each safety-critical preflight operation to be conducted. The mission schedule must also identify day of flight activities. (5) Human space flight. For a proposed launch or reentry with a human being on board a vehicle, an applicant must demonstrate compliance with Sec. Sec. 460.5, 460.7, 460.11, 460.13, 460.15, 460.17, 460.51, and 460.53 of this chapter. (6) Radionuclides. The FAA will evaluate the launch or reentry of any radionuclide on a case-by-case basis, and issue an approval if the FAA finds that the launch or reentry is consistent with public health and safety, safety of property, and national security and foreign policy interests of the United States. For any radionuclide on a launch or reentry vehicle, an applicant must-- (i) Identify the type and quantity; (ii) Include a reference list of all documentation addressing the safety of its intended use; and (iii) Describe all approvals by the Nuclear Regulatory Commission for preflight ground operations. (7) Additional material. The FAA may also request-- (i) Any information incorporated by reference in the license application; and (ii) Additional products that allow the FAA to conduct an independent safety analysis.

Sec. 450.47 Environmental review.

(a) General. The FAA is responsible for complying with the procedures and policies of the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders prior to issuing a launch or reentry license. An applicant must provide the FAA with information needed to comply with such requirements. The FAA will consider and document the potential environmental effects associated with issuing a launch or reentry license consistent with paragraph (b) of this section. (b) Environmental Impact Statement or Environmental Assessment. An applicant must-- (1) Prepare an Environmental Assessment with FAA oversight; (2) Assume financial responsibility for preparation of an Environmental Impact Statement by an FAA-selected and -managed consultant contractor; or (3) Submit a written re-evaluation of a previously submitted Environmental Assessment or Environmental Impact Statement when requested by the FAA. (c) Categorical exclusion. An applicant may request a categorical exclusion determination from the FAA by submitting the request and supporting rationale. (d) Application requirements. An application must include an approved FAA Environmental Assessment, Environmental Impact Statement, categorical exclusion determination, or written re-evaluation, which should address compliance with any other applicable environmental laws, regulations, and Executive Orders covering all planned licensed activities in compliance with NEPA and the Council on Environmental Quality Regulations for Implementing the Procedural Provisions of NEPA.

Subpart C--Safety Requirements

Public Safety Criteria

Sec. 450.101 Public safety criteria.

(a) Launch risk criteria. An operator may initiate the flight of a launch vehicle only if all risks to the public satisfy the criteria in paragraphs (a)(1) through (4) of this section. The following criteria apply to each launch from liftoff through orbital insertion for an orbital launch, and through final impact or landing for a suborbital launch: (1) Collective risk. The collective risk, measured as expected number of casualties (EC), consists of risk posed by impacting inert and explosive debris, toxic release, and far field blast overpressure. The FAA will determine whether to approve public risk due to any other hazard associated with the proposed flight of a launch vehicle on a case-by-case basis. (i) The risk to all members of the public, excluding persons in aircraft and neighboring operations personnel, must not exceed an expected number of 1 x 10-4 casualties. (ii) The risk to all neighboring operations personnel must not exceed an expected number of 2 x 10-4 casualties. (2) Individual risk. The individual risk, measured as probability of casualty (PC), consists of risk posed by impacting inert and explosive debris, toxic release, and far field blast overpressure. The FAA will determine whether to approve public risk due to any other hazard associated with the proposed flight of a launch vehicle on a case-by-case basis. (i) The risk to any individual member of the public, excluding neighboring operations personnel, must not exceed a probability of casualty of 1 x 10-6 per launch. (ii) The risk to any individual neighboring operations personnel must not exceed a probability of casualty of 1 x 10-5 per launch. (3) Aircraft risk. A launch operator must establish any aircraft hazard areas necessary to ensure the probability of impact with debris capable of causing a casualty for aircraft does not exceed 1 x 10-\6\. (4) Risk to critical assets. The probability of loss of functionality for each critical asset must not exceed 1 x 10-\3\, or a more stringent probability if the FAA determines, in consultation with relevant Federal agencies, it is necessary to protect the national security interests of the United States. (b) Reentry risk criteria. An operator may initiate the deorbit of a vehicle only if all risks to the public satisfy the criteria in paragraphs (b)(1) through (4) of this section. The following criteria apply to each reentry, from the final health check prior to the deorbit burn through final impact or landing: (1) Collective risk. The collective risk, measured as expected number of casualties (EC), consists of risk posed by impacting inert and explosive debris, toxic release, and far field blast

[[Page 15427]]

overpressure. The FAA will determine whether to approve public risk due to any other hazard associated with the proposed deorbit of a reentry vehicle on a case-by-case basis. (i) The risk to all members of the public, excluding persons in aircraft and neighboring operations personnel, must not exceed an expected number of 1 x 10-\4\ casualties. (ii) The risk to all neighboring operations personnel must not exceed an expected number of 2 x 10-\4\ casualties. (2) Individual risk. The individual risk, measured as probability of casualty (PC), consists of risk posed by impacting inert and explosive debris, toxic release, and far field blast overpressure. The FAA will determine whether to approve public risk due to any other hazard associated with the proposed flight of a launch vehicle on a case-by-case basis. (i) The risk to any individual member of the public, excluding neighboring operations personnel, must not exceed a probability of casualty of 1 x 10-\6\ per reentry. (ii) The risk to any individual neighboring operations personnel must not exceed a probability of casualty of 1 x 10-\5\ per reentry. (3) Aircraft risk. A reentry operator must establish any aircraft hazard areas necessary to ensure the probability of impact with debris capable of causing a casualty for aircraft does not exceed 1 x 10-\6\. (4) Risk to critical assets. The probability of loss of functionality for each critical asset must not exceed 1 x 10-\3\, or a more stringent probability if the FAA determines, in consultation with relevant Federal agencies, it is necessary to protect the national security interests of the United States. (c) Flight abort. An operator must use flight abort with a flight safety system that meets the requirements of Sec. 450.145 as a hazard control strategy if the consequence of any reasonably foreseeable vehicle response mode, in any one-second period of flight, is greater than 1 x 10-3 conditional expected casualties for uncontrolled areas. This requirement applies to all phases of flight, unless otherwise agreed to by the Administrator based on the demonstrated reliability of the launch or reentry vehicle during that phase of flight. (d) Disposal safety criteria. A launch operator must ensure that any disposal meets the criteria of paragraphs (b)(1), (2), and (3) of this section, or targets a broad ocean area. (e) Protection of people and property on-orbit. (1) A launch or reentry operator must prevent the collision between a launch or reentry vehicle stage or component and people or property on-orbit, in accordance with the requirements in Sec. 450.169(a). (2) For any launch vehicle stage or component that reaches Earth orbit, a launch operator must prevent the creation of debris through the conversion of energy sources into energy that fragments the stage or component, in accordance with the requirements in Sec. 450.171. (f) Notification of planned impacts. For any launch, reentry, or disposal, an operator must notify the public of any region of land, sea, or air that contain, with 97 percent probability of containment, all debris resulting from normal flight events capable of causing a casualty. (g) Validity of the analysis. For any analysis used to demonstrate compliance with this section, an operator must use accurate data and scientific principles and be statistically valid. The method must produce results consistent with or more conservative than the results available from previous mishaps, tests, or other valid benchmarks, such as higher-fidelity methods.

System Safety Program

Sec. 450.103 System safety program.

An operator must implement and document a system safety program throughout the operational lifecycle of a launch or reentry system that includes the following: (a) Safety organization. An operator must maintain and document a safety organization that has clearly defined lines of communication and approval authority for all public safety decisions. At a minimum, the safety organization must have the following positions: (1) Mission director. For each launch or reentry, an operator must designate a position responsible for the safe conduct of all licensed activities and authorized to provide final approval to proceed with licensed activities. This position is referred to as the mission director in this part. (2) Safety official. For each launch or reentry, an operator must designate a position with direct access to the mission director that is-- (i) Responsible for communicating potential safety and noncompliance issues to the mission director; and (ii) Authorized to examine all aspects of the operator's ground and flight safety operations, and to independently monitor compliance with the operator's safety policies, safety procedures, and licensing requirements. (3) Addressing safety concerns. The mission director must ensure that all of the safety official's concerns are addressed. (b) Procedures. An operator must establish procedures to evaluate the operational lifecycle of the launch or reentry system: (1) An operator must conduct a preliminary safety assessment as required by Sec. 450.105, and the system safety program must include: (i) Methods to review and assess the validity of the preliminary safety assessment throughout the operational lifecycle of the launch or reentry system; (ii) Methods for updating the preliminary safety assessment; and (iii) Methods for communicating and implementing the updates throughout the organization. (2) For operators that must conduct a flight hazard analysis as required by Sec. 450.109, the system safety program must include: (i) Methods to review and assess the validity of the flight hazard analysis throughout the operational lifecycle of the launch or reentry system; (ii) Methods for updating the flight hazard analysis; (iii) Methods for communicating and implementing the updates throughout the organization; and (iv) A process for tracking hazards, risks, mitigation and hazard control measures, and verification activities. (c) Configuration management and control. An operator must-- (1) Employ a process that tracks configurations of all safety- critical systems and documentation related to the operation; (2) Ensure the use of correct and appropriate versions of systems and documentation tracked in paragraph (c)(1) of this section; and (3) Maintain records of launch or reentry system configurations and document versions used for each licensed activity, as required by Sec. 450.219. (d) Post-flight data review. An operator must employ a process for evaluating post-flight data to-- (1) Ensure consistency between the assumptions used for the preliminary safety assessment, any hazard or flight safety analysis, and associated mitigation and hazard control measures; (2) Resolve any identified inconsistencies prior to the next flight of the vehicle; (3) Identify any anomaly that may impact any flight hazard analysis, flight safety analysis, or safety critical system, or is otherwise material to public health and safety and the safety of property; and (4) Address any anomaly identified in paragraph (d)(3) of this section prior to

[[Page 15428]]

the next flight, including updates to any flight hazard analysis, flight safety analysis, or safety critical system. (e) Application requirements. An applicant must submit in its application the following: (1) A description of the applicant's safety organization as required by paragraph (a) of this section, identifying the applicant's lines of communication and approval authority, both internally and externally, for all public safety decisions and the provision of public safety services; and (2) A summary of the processes and products identified in the system safety program requirements in paragraphs (b), (c), and (d) of this section.

Preliminary Safety Assessment for Flight and Hazard Control Strategies

Sec. 450.105 Preliminary safety assessment for flight.

(a) Preliminary safety assessment. An operator must conduct and document a preliminary safety assessment for the flight of a launch or reentry vehicle that identifies-- (1) Vehicle response modes; (2) Public safety hazards associated with vehicle response modes, including impacting inert and explosive debris, toxic release, and far field blast overpressure; (3) Geographical areas where vehicle response modes could jeopardize public safety; (4) Any population exposed to public safety hazards in or near the identified geographical areas; (5) The CEC, unless otherwise agreed to by the Administrator based on the demonstrated reliability of the launch or reentry vehicle during any phase of flight; (6) A preliminary hazard list which documents all hardware, operational, and design causes of vehicle response modes that, excluding mitigation, have the capability to create a hazard to the public; (7) Safety-critical systems; and (8) A timeline of all safety-critical events. (b) Application requirements. An applicant must submit the result of the preliminary safety assessment, including all of the items identified in paragraph (a) of this section.

Sec. 450.107 Hazard control strategies.

(a) General. For each phase of a launch or reentry vehicle's flight-- (1) If the public safety hazards identified in the preliminary safety assessment can be mitigated adequately to meet the requirements of Sec. 450.101 using physical containment, wind weighting, or flight abort, in accordance with paragraphs (b), (c), and (d) of this section, an operator does not need to conduct a flight hazard analysis for that phase of flight. (2) If the public safety hazards identified in the preliminary safety assessment cannot be mitigated adequately to meet the public risk criteria of Sec. 450.101 using physical containment, wind weighting, or flight abort, in accordance with paragraphs (b), (c), and (d) of this section, an operator must conduct a flight hazard analysis in accordance with Sec. 450.109 to derive hazard controls for that phase of flight. (b) Physical containment. To use physical containment as a hazard control strategy, an operator must-- (1) Ensure that the launch vehicle does not have sufficient energy for any hazards associated with its flight to reach outside the flight hazard area developed in accordance with Sec. 450.133; and (2) Apply other mitigation measures to ensure no public exposure to hazards as agreed to by the Administrator on a case-by-case basis. (c) Wind weighting. To use wind weighting as a hazard control strategy-- (1) The launch vehicle must be a suborbital rocket that does not contain any guidance or directional control system; and (2) An operator must conduct the launch using a wind weighting safety system in accordance with Sec. 450.141. (d) Flight abort. To use flight abort as a hazard control strategy an operator must employ a flight safety system, or other safeguards agreed to by the Administrator, that meets the requirements of Sec. 450.145. (e) Application requirement. An applicant must-- (1) Describe its hazard control strategy for each phase of flight; and (2) If using physical containment as a hazard control strategy-- (i) Demonstrate that the launch vehicle does not have sufficient energy for any hazards associated with its flight to reach outside the flight hazard area developed in accordance with Sec. 450.133; and (ii) Describe the methods used to ensure that flight hazard areas are cleared of the public and critical assets.

Flight Hazard Analyses for Hardware and Software

Sec. 450.109 Flight hazard analysis.

Unless an operator uses physical containment, wind weighting, or flight abort as a hazard control strategy, an operator must perform and document a flight hazard analysis, and continue to maintain it throughout the lifecycle of the launch or reentry system. Hazards associated with computing systems and software are further addressed in Sec. 450.111. (a) Flight hazard analysis. A flight hazard analysis must identify, describe, and analyze all reasonably foreseeable hazards to public safety and safety of property resulting from the flight of a launch or reentry vehicle. Each flight hazard analysis must-- (1) Identify all reasonably foreseeable hazards, and the corresponding vehicle response mode for each hazard, associated with the launch or reentry system relevant to public safety and safety of property, including those resulting from: (i) Vehicle operation, including staging and release; (ii) System, subsystem, and component failures or faults; (iii) Software operations; (iv) Environmental conditions; (v) Human factors; (vi) Design inadequacies; (vii) Procedure deficiencies; (viii) Functional and physical interfaces between subsystems, including any vehicle payload; (ix) Reuse of components or systems; and (x) Interactions of any of the items in paragraphs (a)(1)(i) through (ix) of this section. (2) Assess each hazard's likelihood and severity. (3) Ensure that the risk associated with each hazard meets the following criteria: (i) The likelihood of any hazardous condition that may cause death or serious injury to the public must be extremely remote; and (ii) The likelihood of any hazardous condition that may cause major damage to public property or critical assets must be remote. (4) Identify and describe the risk elimination and mitigation measures required to satisfy paragraph (a)(3) of this section. (5) Demonstrate that the risk elimination and mitigation measures achieve the risk levels of paragraph (a)(3) of this section through validation and verification. Verification includes: (i) Analysis; (ii) Test; (iii) Demonstration; or (iv) Inspection. (b) Identification of new hazards. An operator must establish and document the criteria and techniques for identifying new hazards throughout the lifecycle of the launch or reentry system. (c) Completeness for each flight. For every launch or reentry, the flight

[[Page 15429]]

hazard analysis must be complete and all hazards must be mitigated to an acceptable level in accordance with paragraph (a)(3) of this section. (d) Updates throughout the lifecycle. An operator must continually update the flight hazard analysis throughout the operational lifecycle of the launch or reentry system. (e) Application requirements. An applicant must submit in its application the following: (1) Flight hazard analysis products of paragraphs (a)(1) through (5) of this section, including data that verifies the risk elimination and mitigation measures resulting from the applicant's flight hazard analyses required by paragraph (a)(5) of this section; and (2) The criteria and techniques for identifying new hazards throughout the lifecycle of the launch or reentry system as required by paragraph (b) of this section.

Sec. 450.111 Computing systems and software.

(a) General. An operator must implement and document a process that identifies the hazards and assesses the risks to public health and safety and the safety of property arising from computing systems and software. (b) Safety-critical functions. An operator must identify all safety-critical functions associated with its computing systems and software. Safety-critical computing system and software functions include the following: (1) Software used to control or monitor safety-critical systems; (2) Software that transmits safety-critical data, including time- critical data and data about hazardous conditions; (3) Software that computes safety-critical data; (4) Software that accesses or manages safety-critical data; (5) Software that displays safety-critical data; (6) Software used for fault detection in safety-critical computer hardware or software; (7) Software that responds to the detection of a safety-critical fault; (8) Software used in a flight safety system; (9) Processor-interrupt software associated with safety-critical computer system functions; and (10) Software used for wind weighting. (c) Consequence and the degree of control. Safety-critical functions must be identified by consequence and the degree of control exercised by the software component as defined by paragraphs (d) through (h) of this section. (d) Autonomous software. This section applies to software that exercises autonomous control over safety-critical hardware systems, subsystems, or components, such that a control entity cannot detect and intervene to prevent a hazard that may impact public health and safety or the safety of property. Autonomous software must meet the following criteria: (1) The software component must be subjected to full path coverage testing. Any inaccessible code must be documented and addressed; (2) The software component's functions must be tested on flight- like hardware. Testing must include nominal operation and fault responses for all functions; (3) An operator must conduct computing system and software hazard analyses for the integrated system and for each autonomous, safety- critical software component; (4) An operator must verify and validate any computing systems and software. Verification and validation must include testing by a test team independent of the software development division or organization; and (5) An operator must develop and implement software development plans, including descriptions of the following: (i) Coding standards used; (ii) Configuration control; (iii) Programmable logic controllers; (iv) Policy on use of any commercial-off-the-shelf software; and (v) Policy on software reuse. (e) Semi-autonomous software. This section applies to software that exercises control over safety-critical hardware systems, subsystems, or components, allowing time for predetermined safe detection and intervention by a control entity to detect and intervene to prevent a hazard that may impact public health and safety or the safety of property. Semi-autonomous software must meet the following criteria: (1) The software component's safety-critical functions must be subjected to full path coverage testing. Any inaccessible code in a safety-critical function must be documented and addressed; (2) The software component's safety-critical functions must be tested on flight-like hardware. Testing must include nominal operation and fault responses for all safety-critical functions; (3) An operator must conduct computing system and software hazard analyses for the integrated system; (4) An operator must verify and validate any computing systems and software. Verification and validation must include testing by a test team independent of the software development division or organization; and (5) An operator must develop and implement software development plans, including descriptions of the following: (i) Coding standards used; (ii) Configuration control; (iii) Programmable logic controllers; (iv) Policy on use of any commercial-off-the-shelf software; and (v) Policy on software reuse. (f) Redundant fault-tolerant software. This section applies to software that exercises control over safety-critical hardware systems, subsystems, or components, for which a non-software component must also fail in order to impact public health and safety or the safety of property. Redundant fault-tolerant software must meet the following criteria: (1) The software component's safety-critical functions must be tested on flight-like hardware. Testing must include nominal operation and fault responses for all safety-critical functions; (2) An operator must conduct computing system and software hazard analyses for the integrated system; (3) An operator must verify and validate any computing systems and software. Verification and validation must include testing by a test team independent of the software development division or organization; and (4) An operator must develop and implement software development plans, including descriptions of the following: (i) Coding standards used; (ii) Configuration control; (iii) Programmable logic controllers; (iv) Policy on use of any commercial-off-the-shelf software; and (v) Policy on software reuse. (g) Influential software. This section applies to software that provides information to a person who uses the information to take actions or make decisions that can impact public health and safety or the safety of property, but does not require operator action to avoid a mishap. Influential software must meet the following criteria: (1) An operator must conduct computing system and software hazard analyses for the integrated system; (2) An operator must verify and validate any computing systems and software. Verification and validation must include testing by a test team independent of the software development division or organization; and

[[Page 15430]]

(3) An operator must develop and implement software development plans, including descriptions of the following: (i) Coding standards used; (ii) Configuration control; (iii) Programmable logic controllers; (iv) Policy on use of any commercial-off-the-shelf software; and (v) Policy on software reuse. (h) Application requirements. An applicant must document and include in its application the following: (1) For autonomous software: (i) Test plans and results as required by paragraphs (d)(1) and (2) of this section; (ii) All software requirements, and design and architecture documentation; (iii) The outputs of the hazard analyses as required by paragraph (d)(3) of this section; and (iv) Computing system and software validation and verification plans as required by paragraph (d)(4) of this section. (2) For semi-autonomous software: (i) Test plans and results as required by paragraphs (e)(1) and (2) of this section; (ii) All software requirements, and design and architecture documentation; (iii) The outputs of the hazard analyses as required by paragraph (e)(3) of this section; and (iv) Computing system and software validation and verification plans as required by paragraph (e)(4) of this section. (3) For redundant fault-tolerant software: (i) Test plans and results as required by paragraph (f)(1) of this section; and (ii) All software requirements and design documents. (4) For influential software: (i) The software component's development and testing; and (ii) The software component's functionality. (5) For software that the applicant has determined to have no safety impact, the software component's functionality must be described in detail.

Flight Safety Analyses

Sec. 450.113 Flight safety analysis requirements--scope and applicability.

(a) Scope. An operator must perform and document a flight safety analysis-- (1) For orbital launch, from liftoff through orbital insertion, and any component or stage landings; (2) For suborbital launch, from liftoff through final impact; (3) For disposal, from the beginning of the deorbit burn through final impact; (4) For reentry, from the beginning of the deorbit burn through landing; and (5) For hybrid vehicles, for all phases of flight, unless the Administrator determines otherwise based on demonstrated reliability. (b) Applicability. (1) Sections 450.115 through 450.121 and 450.131 through 450.139 apply to all launch and reentry vehicles; (2) Sections 450.123 through 450.129 apply to a launch or reentry vehicle that relies on flight abort to comply with Sec. 450.101; and (3) Section 450.141 applies to the launch of an unguided suborbital launch vehicle.

Sec. 450.115 Flight safety analysis methods.

(a) Scope of the analysis. An operator's flight safety analysis method must account for all reasonably foreseeable events and failures of safety-critical systems during nominal and non-nominal launch or reentry that could jeopardize public health and safety, and the safety of property. (b) Level of fidelity of the analysis. An operator's flight safety analysis method must have a level of fidelity sufficient to-- (1) Demonstrate that any risk to the public satisfies the public safety criteria of Sec. 450.101, including the use of mitigations, accounting for all known sources of uncertainty, using a means of compliance accepted by the Administrator; and (2) Identify the dominant source of each type of public risk with a criterion in Sec. 450.101(a) or (b) in terms of phase of flight, source of hazard (such as toxic exposure, inert, or explosive debris), and vehicle response mode. (c) Application requirements. An applicant must submit a description of the flight safety analysis methodology, including identification of: (1) The scientific principles and statistical methods used; (2) All assumptions and their justifications; (3) The rationale for the level of fidelity; (4) The evidence for validation and verification required by Sec. 450.101(g); (5) The extent that the benchmark conditions are comparable to the foreseeable conditions of the intended operations; and (6) The extent that risk mitigations were accounted for in the analyses.

Sec. 450.117 Trajectory analysis for normal flight.

(a) General. A flight safety analysis must include a trajectory analysis that establishes-- (1) For any phase of flight within the scope as provided by Sec. 450.113(a), the limits of a launch or reentry vehicle's normal flight as defined by the nominal trajectory, and the following sets of trajectories sufficient to characterize variability and uncertainty during normal flight: (i) A set of trajectories to characterize variability. This set must describe how the intended trajectory could vary due to conditions known prior to initiation of flight; and (ii) A set of trajectories to characterize uncertainty. This set must describe how the actual trajectory could differ from the intended trajectory due to random uncertainties. (2) A fuel exhaustion trajectory that produces instantaneous impact points with the greatest range for any given time after liftoff for any stage that has the potential to impact the Earth and does not burn to propellant depletion before a programmed thrust termination. (3) For vehicles with a flight safety system, trajectory data or parameters that describe the limits of a useful mission. (b) Trajectory model. A final trajectory analysis must use a six- degree of freedom trajectory model to satisfy the requirements of paragraph (a) of this section. (c) Wind effects. A trajectory analysis must account for all wind effects, including profiles of winds that are no less severe than the worst wind conditions under which flight might be attempted, and for uncertainty in the wind conditions. (d) Application requirements. An applicant must submit the following: (1) A description of the methodology used to characterize the vehicle's flight behavior throughout normal flight and limits of a useful mission, including: (i) The scientific principles and statistical methods used; (ii) All assumptions and their justifications; (iii) The rationale for the level of fidelity, and (iv) The evidence for validation and verification required by Sec. 450.101(g). (2) A description of the input data used to characterize the vehicle's flight behavior throughout normal flight and limits of a useful mission, including: (i) The worst wind conditions under which flight might be attempted, and a description of how the operator will evaluate the wind conditions and uncertainty in the wind conditions prior to initiating the operation; (ii) A description of the wind input data, including uncertainties; (iii) A description of the parameters with a significant influence on the vehicle's behavior throughout normal flight, including a quantitative description of the nominal value for

[[Page 15431]]

each significant parameter throughout normal flight; (iv) A description of the random uncertainties with a significant influence on the vehicle's behavior throughout normal flight, including a quantitative description of the statistical distribution for each significant parameter; and (v) The primary mission objectives and the conditions that describe the limits of a useful mission. (3) Representative normal flight trajectory analysis outputs, including the position, velocity, and vacuum instantaneous impact point, for each second of flight for-- (i) The nominal trajectory; (ii) A fuel exhaustion trajectory under otherwise nominal conditions; (iii) A set of trajectories that characterize variability in the intended trajectory based on conditions known prior to initiation of flight; (iv) A set of trajectories that characterize how the actual trajectory could differ from the intended trajectory due to random uncertainties, and (v) A set of trajectories that characterize the limits of a useful mission as described in paragraph (a)(3) of this section. (4) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.119 Trajectory analysis for malfunction flight.

(a) General. A flight safety analysis must include a trajectory analysis that establishes-- (1) The vehicle's capability to depart from normal flight; and (2) The vehicle's deviation capability in the event of a malfunction during flight. (b) Characterizing foreseeable trajectories. A malfunction trajectory analysis must account for each cause of a malfunction flight, including software and hardware failures. For each cause of a malfunction trajectory, the analysis must characterize the foreseeable trajectories resulting from a malfunction. The analysis must account for-- (1) All trajectory times during the thrusting phases, or when the lift vector is controlled, during flight; (2) The duration, starting when a malfunction begins to cause each flight deviation throughout the thrusting phases of flight; (3) Trajectory time intervals between malfunction turn start times that are sufficient to establish flight safety limits, if any, and individual risk contours that are smooth and continuous; (4) The relative probability of occurrence of each malfunction turn of which the vehicle is capable; (5) The probability distribution of position and velocity of the vehicle when each malfunction will terminate due to vehicle breakup, along with the cause of termination and the state of the vehicle; and (6) The vehicle's flight behavior from the time when a malfunction begins to cause a flight deviation until ground impact or predicted structural failure, with trajectory time intervals that are sufficient to establish individual risk contours that are smooth and continuous. (c) Application requirements. An applicant must submit-- (1) A description of the methodology used to characterize the vehicle's flight behavior throughout malfunction flight, including: (i) The scientific principles and statistical methods used; (ii) All assumptions and their justifications; (iii) The rationale for the level of fidelity; and (iv) The evidence for validation and verification required by Sec. 450.101(g). (2) A description of the input data used to characterize the vehicle's malfunction flight behavior, including: (i) A list of each cause of malfunction flight considered; (ii) A list of each type of malfunction flight for which malfunction flight behavior was characterized; (iii) A description of the parameters with a significant influence on the vehicle's behavior throughout malfunction flight for each type of malfunction flight characterized, including a quantitative description of the nominal value for each significant parameter throughout normal flight; and (iv) A description of the random uncertainties with a significant influence on the vehicle's behavior throughout malfunction flight for each type of malfunction flight characterized, including a quantitative description of the statistical distribution for each significant parameter. (3) Representative malfunction flight trajectory analysis outputs, including the position, velocity, and vacuum instantaneous impact point for each second of flight for-- (i) Each set of trajectories that characterizes a type of malfunction flight; and (ii) The probability of each trajectory that characterizes a type of malfunction flight. (4) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.121 Debris analysis.

(a) General. A flight safety analysis must include a debris analysis that characterizes the debris generated for each foreseeable vehicle response mode as a function of vehicle flight time, accounting for the effects of fuel burn and any configuration changes. (b) Vehicle impact or breakup. A debris analysis must account for each foreseeable cause of vehicle breakup, including any breakup caused by flight safety system activation, and for impact of an intact vehicle. (c) Debris thresholds. A debris analysis must account for all inert, explosive, and other hazardous vehicle, vehicle component, and payload debris foreseeable from normal and malfunctioning vehicle flight. At a minimum, the debris analysis must identify-- (1) All inert debris that can cause a casualty or loss of functionality of a critical asset, including all debris that could-- (i) Impact a human being with a mean expected kinetic energy at impact greater than or equal to 11 ft-lbs; (ii) Impact a human being with a mean impact kinetic energy per unit area at impact greater than or equal to 34 ft-lb/in\2\; (iii) Cause a casualty due to impact with an aircraft; (iv) Cause a casualty due to impact with a waterborne vessel; or (v) Pose a toxic or fire hazard. (2) Any explosive debris that could cause a casualty or loss of functionality of a critical asset. (d) Application requirements. An applicant must submit: (1) A description of the debris analysis methodology, including input data, assumptions, and justifications for the assumptions; (2) A description of all vehicle breakup modes and the development of debris lists; (3) All debris fragment lists necessary to quantitatively describe the physical, aerodynamic, and harmful characteristics of each debris fragment or fragment class; and (4) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.123 Flight safety limits analysis.

(a) General. A flight safety analysis must identify the location of uncontrolled areas and establish flight safety limits that define when an operator must initiate flight abort to-- (1) Ensure compliance with the public safety criteria of Sec. 450.101; and (2) Prevent debris capable of causing a casualty from impacting in

[[Page 15432]]

uncontrolled areas if the vehicle is outside the limits of a useful mission. (b) Flight safety limits. The analysis must identify flight safety limits for use in establishing flight abort rules. The flight safety limits must-- (1) Account for temporal and geometric extents on the Earth's surface of any vehicle hazards resulting from any planned or unplanned event for all times during flight; (2) Account for potential contributions to the debris impact dispersions; and (3) Be designed to avoid flight abort that results in increased collective risk to people in uncontrolled areas, compared to continued flight. (c) Gates. For an orbital launch, or any launch or reentry where one or more trajectories that represents a useful mission intersects a flight safety limit that provides containment of debris capable of causing a casualty, the flight safety analysis must include a gate analysis as required by Sec. 450.125. (d) Real-time flight safety limits. As an alternative to flight safety limits analysis, flight abort time can be computed and applied in real-time during vehicle flight as necessary to meet the criteria in Sec. 450.101. (e) Application requirements. An applicant must submit: (1) A description of how each flight safety limit will be computed including references to public safety criteria of Sec. 450.101; (2) Representative flight safety limits and associated parameters; (3) An indication of which flight abort rule from Sec. 450.165(c) is used in conjunction with each example flight safety limit; (4) A graphic depiction or series of depictions of representative flight safety limits, the launch or landing point, all uncontrolled area boundaries, and vacuum instantaneous impact point traces for the nominal trajectory, extents of normal flight, and limits of a useful mission trajectories; (5) If the requirement for flight abort is computed in real-time in lieu of precomputing flight safety limits, a description of how the real-time flight abort requirement is computed including references to public safety criteria of Sec. 450.101; and (6) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.125 Gate analysis.

(a) Applicability. The flight safety analysis must include a gate analysis for an orbital launch or any launch or reentry where one or more trajectories that represent a useful mission intersect a flight safety limit that provides containment of debris capable of causing a casualty. (b) Analysis requirements. The analysis must establish-- (1) A relaxation of the flight safety limits that allows continued flight or a gate where a decision will be made to abort the launch or reentry, or allow continued flight; (2) If a gate is established, a measure of performance at the gate that enables the flight abort crew or autonomous flight safety system to determine whether the vehicle is able to complete a useful mission, and abort the flight if it is not; (3) Accompanying flight abort rules; and (4) For an orbital launch, a gate at the last opportunity to determine whether the vehicle's flight is in compliance with the flight abort rules and can make a useful mission, and abort the flight if it is not. (c) Gate extents. The extents of any gate or relaxation of the flight safety limits must be based on normal trajectories, trajectories that may achieve a useful mission, collective risk, and consequence criteria as follows: (1) Flight safety limits must be gated or relaxed where they intersect with a normal trajectory if that trajectory would meet the individual and collective risk criteria of Sec. 450.101(a)(1) and (2) or (b)(1) and (2) when treated like a nominal trajectory with normal trajectory dispersions. The predicted average consequence from flight abort resulting from any reasonable vehicle response mode, in any one- second period of flight, using the modified flight safety limits, must not exceed 1 x 10-2 conditional expected casualties; (2) Flight safety limits may be gated or relaxed where they intersect with a trajectory within the limits of a useful mission if that trajectory would meet the individual and collective risk criteria of Sec. 450.101(a)(1) and (2) or (b)(1) and (2) when treated like a nominal trajectory with normal trajectory dispersions. The predicted average consequence from flight abort resulting from any reasonable vehicle response mode, in any one-second period of flight, using the modified flight safety limits, must not exceed 1 x 10-2 conditional expected casualties; and (3) For an orbital launch, in areas where no useful mission trajectories intersect with flight safety limits, the final gate may extend no further than necessary to allow vehicles on a useful mission to continue flight. (d) Application requirements. An applicant must submit: (1) A description of the methodology used to establish each gate or relaxation of a flight safety limit; (2) A description of the measure of performance used to determine whether a vehicle will be allowed to cross a gate without flight abort, the acceptable ranges of the measure of performance, and how these ranges were determined; (3) A graphic depiction or depictions showing representative flight safety limits, any uncontrolled area overflight regions, and instantaneous impact point traces for the nominal trajectory, extents of normal flight, and limits of a useful mission trajectories; and (4) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.127 Data loss flight time and planned safe flight state analyses.

(a) General. For each flight, a flight safety analysis must establish data loss flight times and a planned safe flight state to establish each flight abort rule that applies when vehicle tracking data is not available for use by the flight abort crew or autonomous flight safety system. (b) Data loss flight times. (1) A flight safety analysis must establish a data loss flight time for each trajectory time interval along the nominal trajectory from initiation of the flight of a launch or reentry vehicle through that point during nominal flight when the minimum elapsed thrusting or gliding time is no greater than the time it would take for a normal vehicle to reach the final gate crossing, or the planned safe flight state established under paragraph (c) of this section, whichever occurs earlier. (2) Data loss flight times must account for forces that may stop the vehicle before reaching a flight safety limit. (3) Data loss flight times may be computed and applied in real-time during vehicle flight in which case the state vector just prior to loss of data should be used as the nominal state vector. (c) Planned safe flight state. For a vehicle that performs normally during all portions of flight, the planned safe flight state is the point during the nominal flight of a vehicle where-- (1) The vehicle cannot reach a flight safety limit for the remainder of the flight; (2) The vehicle achieves orbital insertion; or (3) The vehicle's state vector reaches a state where the vehicle is no longer required to have a flight safety system. (d) Application requirements. An applicant must submit: (1) A description of the methodology used to determine data loss flight times;

[[Page 15433]]

(2) Tabular data describing the data loss flight times from a representative mission; (3) The safe flight state for a representative mission and methodology used to determine it; and (4) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.129 Time delay analysis.

(a) General. A flight safety analysis must include a time delay analysis that establishes the mean elapsed time between the violation of a flight abort rule and the time when the flight safety system is capable of aborting flight for use in establishing flight safety limits. The time delay analysis must determine a time delay distribution that accounts for all foreseeable sources of delay. (b) Application requirements. An applicant must submit: (1) A description of the methodology used in the time delay analysis; (2) A tabular listing of each time delay source and the total delay, with uncertainty; and (3) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.131 Probability of failure analysis.

(a) General. For each hazard and phase of flight, a flight safety analysis for a launch or reentry must account for vehicle failure probability. The probability of failure must be consistent for all hazards and phases of flight. (1) For a vehicle or vehicle stage with fewer than two flights, the failure probability estimate must account for the outcome of all previous flights of vehicles developed and launched or reentered in similar circumstances. (2) For a vehicle or vehicle stage with two or more flights, vehicle failure probability estimates must account for the outcomes of all previous flights of the vehicle or vehicle stage in a statistically valid manner. The outcomes of all previous flights of the vehicle or vehicle stage must account for data on partial failures and anomalies, including Class 3 and Class 4 mishaps, as defined in Sec. 401.5 of this chapter. (b) Failure. For flight safety analysis purposes, a failure occurs when a vehicle does not complete any phase of normal flight or when any anomalous condition exhibits the potential for a stage or its debris to impact the Earth or reenter the atmosphere outside the normal trajectory envelope during the mission or any future mission of similar vehicle capability. Also, a Class 1 or Class 2 mishap, as defined in Sec. 401.5 of this chapter, constitutes a failure. (c) Previous flight. For flight safety analysis purposes-- (1) The flight of a launch vehicle begins at a time in which a launch vehicle normally or inadvertently lifts off from a launch platform; and (2) The flight of a reentry vehicle or deorbiting upper stage begins at a time in which a vehicle attempts to initiate a deorbit. (d) Allocation. The vehicle failure probability estimate must be distributed across flight time and vehicle response mode. The distribution must be consistent with-- (1) The data available from all previous flights of vehicles developed and launched or reentered in similar circumstances; and (2) Data from previous flights of vehicles, stages, or components developed and launched or reentered by the subject vehicle developer or operator. Such data may include previous experience involving similar-- (i) Vehicle, stage, or component design characteristics; (ii) Development and integration processes, including the extent of integrated system testing; and (iii) Level of experience of the vehicle operation and development team members. (e) Observed vs. conditional failure rate. Probability of failure allocation must account for significant differences in the observed failure rate and the conditional failure rate. A probability of failure analysis must use a constant conditional failure rate for each phase of flight, unless there is clear and convincing evidence of a different conditional failure rate for a particular vehicle, stage, or phase of flight. (f) Application requirements. An applicant must submit: (1) A description of the probability of failure analysis, including all assumptions and justifications for the assumptions, analysis methods, input data, and results; (2) A representative set of tabular data and graphs of the predicted failure rate and cumulative failure probability for each foreseeable vehicle response mode; and (3) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.133 Flight hazard area analysis.

(a) General. A flight safety analysis must include a flight hazard area analysis that identifies any region of land, sea, or air that must be surveyed, publicized, controlled, or evacuated in order to control the risk to the public. A flight hazard area analysis must account for all reasonably foreseeable vehicle response modes during nominal and non-nominal flight that could result in a casualty. The analysis must account for, at a minimum-- (1) The regions of land, sea, and air potentially exposed to debris impact resulting from normal flight events and from debris hazards resulting from any potential malfunction; (2) Any hazard controls implemented to control risk to any hazard; (3) The limits of a launch or reentry vehicle's normal flight, including winds that are no less severe than the worst wind conditions under which flight might be attempted and uncertainty in the wind conditions; (4) The debris identified for each foreseeable cause of breakup, and any planned jettison of debris, launch or reentry vehicle components, or payload; (5) All foreseeable sources of debris dispersion during freefall, including wind effects, guidance and control, velocity imparted by break-up or jettison, lift, and drag forces; and (6) A probability of one for any planned debris hazards or planned impacts. (b) Waterborne vessel hazard areas. The flight hazard area analysis for waterborne vessels must determine the areas and durations for regions of water-- (1) That are necessary to contain, with 97 percent probability of containment, all debris resulting from normal flight events capable of causing a casualty to persons on waterborne vessels; (2) That are necessary to contain either where the probability of debris capable of causing a casualty impacting on or near a vessel would exceed 1 x 10-5, accounting for all relevant hazards, or where the individual probability of casualty for any person on board a vessel would exceed the criterion in Sec. 450.101(a)(2) or (b)(2); and (3) Where reduced vessel traffic is necessary to meet collective risk criterion in Sec. 450.101(a)(1) or (b)(1). (c) Land hazard areas. The flight hazard area analysis for land must determine the durations and areas regions of land-- (1) That are necessary to contain, with 97 percent probability of containment, all debris resulting from normal flight events capable of causing a casualty to any person on land; (2) Where the individual probability of casualty for any person on land would exceed the criterion in Sec. 450.101(a)(2) or (b)(2); and (3) Where reduced population is necessary to meet the collective risk criterion in Sec. 450.101(a)(1) or (b)(1). (d) Airspace hazard volumes. The flight hazard area analysis for airspace must determine the durations and

[[Page 15434]]

volumes for regions of air to be submitted to the FAA for approval-- (1) That are necessary to contain, with 97 percent probability of containment, all debris resulting from normal flight events capable of causing a casualty to persons on an aircraft; and (2) Where the probability of impact on an aircraft would exceed the criterion in Sec. 450.101(a)(3) or (b)(3). (e) Application requirements. An applicant must submit: (1) A description of the methodology to be used in the flight hazard area analysis including all assumptions and justifications for the assumptions, vulnerability models, analysis methods, input data, including: (i) Input wind data and justification that those represent the worst wind conditions under which flight might be attempted accounting for uncertainty in the wind conditions; (ii) Classes of waterborne vessel and vulnerability criteria employed; and (iii) Classes of aircraft and vulnerability criteria employed. (2) Tabular data and graphs of the results of the flight hazard area analysis, including: (i) Geographical coordinates of all hazard areas that are representative of those to be published prior to any proposed operation; (ii) Representative 97 percent probability of containment contours for all debris resulting from normal flight events capable of causing a casualty, regardless of location, including regions of land, sea, or air; (iii) Representative individual probability of casualty contours regardless of location; (iv) If applicable, representative 1 x 10-5 and 1 x 10-6 probability of impact contours for all debris capable of causing a casualty to persons on an waterborne vessel regardless of location; and (v) Representative 1 x 10-6 and 1 x 10-7 probability of impact contours for all debris capable of causing a casualty to persons on an aircraft regardless of location. (3) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.135 Debris risk analysis.

(a) General. A debris risk analysis must demonstrate compliance with public safety criteria in Sec. 450.101, either-- (1) Prior to the day of the operation, accounting for all foreseeable conditions within the flight commit criteria; or (2) During the countdown using the best available input data. (b) Propagation of debris. A debris risk analysis must compute statistically valid debris impact probability distributions using the input data produced by flight safety analyses required in Sec. Sec. 450.117 through 450.133. The propagation of debris from each predicted breakup location to impact must account for-- (1) All foreseeable forces that can influence any debris impact location; and (2) All foreseeable sources of impact dispersion, including, at a minimum: (i) The uncertainties in atmospheric conditions; (ii) Debris aerodynamic parameters; (iii) Pre-breakup position and velocity; and (iv) Breakup-imparted velocities. (c) Exposure model. A debris risk analysis must account for the distribution of people and critical assets. The exposure input data must-- (1) Include the entire region where there is a significant probability of impact of hazardous debris; (2) Characterize the distribution and vulnerability of people and critical assets both geographically and temporally; (3) Account for the distribution of people in various structures and vehicle types with a resolution consistent with the characteristic size of the impact probability distributions for relevant fragment groups; (4) Have sufficient temporal and spatial resolution that a uniform distribution of people within each defined region can be treated as a single average set of characteristics without degrading the accuracy of any debris analysis output; (5) Use accurate source data from demographic sources, physical surveys, or other methods; (6) Be regularly updated to account for recent land-use changes, population growth, migration, and construction; and (7) Account for uncertainty in the source data and modeling approach. (d) Casualty area and consequence analysis. A debris risk analysis must model the casualty area, and compute the predicted consequences of each reasonably foreseeable vehicle response mode in any one-second period of flight in terms of conditional expected casualties. The casualty area and consequence analysis must account for-- (1) All relevant debris fragment characteristics and the characteristics of a representative person exposed to any potential debris hazard. (2) Any direct impacts of debris fragments, intact impact, or indirect impact effects. (3) The vulnerability of people and critical assets to debris impacts, including: (i) Effects of buildings, ground vehicles, waterborne vessel, and aircraft upon the vulnerability of any occupants; (ii) All hazard sources, such as the potential for any toxic or explosive energy releases; (iii) Indirect or secondary effects such as bounce, splatter, skip, slide or ricochet, including accounting for terrain; (iv) Effect of wind on debris impact vector and toxic releases; (v) Impact speed and angle, accounting for motion of impacted vehicles; (vi) Uncertainty in fragment impact parameters; and (vii) Uncertainty in modeling methodology. (e) Application requirements. An applicant must submit: (1) A description of the methods used to compute the parameters required to demonstrate compliance with the public safety criteria in Sec. 450.101, including a description of how the operator will account for the conditions immediately prior to enabling the flight of a launch vehicle or the reentry of a reentry vehicle, such as the final trajectory, atmospheric conditions, and the exposure of people and critical assets; (2) A description of the methods used to compute debris impact distributions; (3) A description of the methods used to develop the population exposure input data; (4) A description of the exposure input data, including, for each population center, a geographic definition and the distribution of population among shelter types as a function of time of day, week, month, or year; (5) A description of the atmospheric data used as input to the debris risk analysis; (6) The effective unsheltered casualty area for all fragment classes assuming a representative impact vector; (7) The effective casualty area for all fragment classes for a representative type of building, ground vehicle, waterborne vessel, and aircraft, assuming a representative impact vector; (8) Collective and individual debris risk analysis outputs under representative conditions and the worst foreseeable conditions, including: (i) Total collective casualty expectation for the proposed operation; (ii) A list of the collective risk contribution for at least the top ten population centers and all centers with collective risk exceeding 1 percent of the collective risk criterion in Sec. 450.101;

[[Page 15435]]

(iii) A list of the maximum individual probability of casualty for the top ten population centers and all centers that exceed 10 percent of the individual risk criterion in Sec. 450.101; and (iv) A list of the probability of loss of functionality of any critical asset that exceeds 1 percent of the critical asset criterion in Sec. 450.101; (9) A list of the conditional collective casualty expectation for each vehicle response mode for each one-second interval of flight under representative conditions and the worst foreseeable conditions; and (10) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.137 Far-field overpressure blast effects analysis.

(a) General. The far-field overpressure blast effect analysis must demonstrate compliance with public safety criteria in Sec. 450.101, either-- (1) Prior to the day of the operation, accounting for all foreseeable conditions within the flight commit criteria; or (2) During the countdown using the best available input data. (b) Analysis constraints. The analysis must account for-- (1) The potential for distant focus overpressure or overpressure enhancement given current meteorological conditions and terrain characteristics; (2) The potential for broken windows due to peak incident overpressures below 1.0 psi and related casualties; (3) The explosive capability of the vehicle at impact and at altitude and potential explosions resulting from debris impacts, including the potential for mixing of liquid propellants; (4) Characteristics of the vehicle flight and the surroundings that would affect the population's susceptibility to injury, including shelter types and time of day of the proposed operation; (5) Characteristics of the potentially affected windows, including their size, location, orientation, glazing material, and condition; and (6) The hazard characteristics of the potential glass shards, including falling from upper building stories or being propelled into or out of a shelter toward potentially occupied spaces. (c) Application requirements. An applicant must submit a description of the far-field overpressure analysis, including all assumptions and justifications for the assumptions, analysis methods, input data, and results. At a minimum, the application must include: (1) A description of the population centers, terrain, building types, and window characteristics used as input to the far-field overpressure analysis; (2) A description of the methods used to compute the foreseeable explosive yield probability pairs, and the complete set of yield- probability pairs, used as input to the far-field overpressure analysis; (3) A description of the methods used to compute peak incident overpressures as a function of distance from the explosion and prevailing meteorological conditions, including sample calculations for a representative range of the foreseeable meteorological conditions, yields, and population center locations; (4) A description of the methods used to compute the probability of window breakage, including tabular data and graphs for the probability of breakage as a function of the peak incident overpressure for a representative range of window types, building types, and yields accounted for; (5) A description of the methods used to compute the probability of casualty for a representative individual, including tabular data and graphs for the probability of casualty, as a function of location relative to the window and the peak incident overpressure for a representative range of window types, building types, and yields accounted for; (6) Tabular data and graphs showing the hypothetical location of any member of the public that could be exposed to a probability of casualty of 1 x 10-5 or greater for neighboring operations personnel, and 1 x 10-6 or greater for other members of the public, given foreseeable meteorological conditions, yields, and population exposures; (7) The maximum expected casualties that could result from far- field overpressure hazards greater given foreseeable meteorological conditions, yields, and population exposures; (8) A description of the meteorological measurements used as input to any real-time far-field overpressure analysis; and (9) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.139 Toxic hazards for flight.

(a) Applicability. This section applies to any launch or reentry vehicle, including all vehicle components and payloads, that use toxic propellants or other toxic chemicals. (b) General. An operator must-- (1) Conduct a toxic release hazard analysis in accordance with paragraph (c) of this section; (2) Manage the risk of casualties that could arise from the exposure to toxic release through one of the following means: (i) Contain hazards caused by toxic release in accordance with paragraph (d) of this section; or (ii) Perform a toxic risk assessment, in accordance with paragraph (e) of this section, that protects the public in compliance with the risk criteria of Sec. 450.101, including toxic release hazards. (3) Establish flight commit criteria based on the results of its toxic release hazard analysis, containment analysis, or toxic risk assessment for any necessary evacuation of the public from any toxic hazard area. (c) Toxic release hazard analysis. A toxic release hazard analysis must-- (1) Account for any toxic release that could occur during nominal or non-nominal flight; (2) Include a worst-case release scenario analysis or a maximum- credible release scenario analysis; (3) Determine if toxic release can occur based on an evaluation of the chemical compositions and quantities of propellants, other chemicals, vehicle materials, and projected combustion products, and the possible toxic release scenarios; (4) Account for both normal combustion products and any unreacted propellants and phase change or chemical derivatives of released substances; and (5) Account for any operational constraints and emergency procedures that provide protection from toxic release. (d) Toxic containment. An operator using toxic containment must manage the risk of any casualty from the exposure to toxic release either by-- (1) Evacuating, or being prepared to evacuate, the public from a toxic hazard area, where an average member of the public would be exposed to greater than one percent conditional individual probability of casualty in the event of a worst-case release or maximum credible release scenario; or (2) Employing meteorological constraints to limit a launch operation to times during which prevailing winds and other conditions ensure that an average member of the public would not be exposed to greater than one percent conditional individual probability of casualty in the event of a worst-case release or maximum credible release scenario. (e) Toxic risk assessment. An operator using toxic risk assessment must establish flight commit criteria that demonstrate compliance with the public risk criterion of Sec. 450.101. A toxic risk assessment must--

[[Page 15436]]

(1) Account for airborne concentration and duration thresholds of toxic propellants or other chemicals. For any toxic propellant, other chemicals, or combustion product, an operator must use airborne toxic concentration and duration thresholds identified in a means of compliance accepted by the Administrator; (2) Account for physical phenomena expected to influence any toxic concentration and duration in the area surrounding the potential release site; (3) Determine a toxic hazard area for the launch or reentry, surrounding the potential release site for each toxic propellant or other chemical based on the amount and toxicity of the propellant or other chemical, the exposure duration, and the meteorological conditions involved; (4) Account for all members of the public that may be exposed to the toxic release, including all members of the public on land and on any waterborne vessels, populated offshore structures, and aircraft that are not operated in direct support of the launch or reentry; and (5) Account for any risk mitigation measures applied in the risk assessment. (f) Application requirements. An applicant must submit: (1) The identity of toxic propellant, chemical, or combustion products or derivatives in the possible toxic release; (2) The applicant's selected airborne toxic concentration and duration thresholds; (3) The meteorological conditions for the atmospheric transport and buoyant cloud rise of any toxic release from its source to downwind receptor locations; (4) Characterization of the terrain, as input for modeling the atmospheric transport of a toxic release from its source to downwind receptor locations; (5) The identity of the toxic dispersion model used, and any other input data; (6) Representative results of an applicant's toxic dispersion modeling to predict concentrations and durations at selected downwind receptor locations, to determine the toxic hazard area for a released quantity of the toxic substance; (7) For toxic release hazard analysis in accordance with paragraph (c) of this section: (i) A description of the failure modes and associated relative probabilities for potential toxic release scenarios used in the risk evaluation; and (ii) The methodology and representative results of an applicant's determination of the worst-case or maximum-credible quantity of any toxic release that might occur during the flight of a vehicle; (8) For toxic risk assessment in accordance with paragraph (e) of this section: (i) A demonstration that the public will not be exposed to airborne concentrations above the toxic concentration and duration thresholds, based upon representative results of the toxic release hazard analysis; (ii) The population density in receptor locations that are identified by toxic dispersion modeling as toxic hazard areas; (iii) A description of any risk mitigations applied in the toxic risk assessment; and (iv) The identity of the population database used; and (9) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.141 Wind weighting for the flight of an unguided suborbital launch vehicle.

(a) Applicability. This section applies to the flight of an unguided suborbital launch vehicle using wind weighting to meet the public safety criteria of Sec. 450.101. (b) Wind weighting safety system. The flight of an unguided suborbital launch vehicle that uses a wind weighting safety system must meet the following: (1) The launcher azimuth and elevation settings must be wind weighted to correct for the effects of wind conditions at the time of flight to provide a safe impact location; and (2) An operator must use launcher azimuth and elevation angle settings that ensures the rocket will not fly in an unintended direction given wind uncertainties. (c) Analysis. An operator must-- (1) Establish flight commit criteria and other flight safety rules that control the risk to the public from potential adverse effects resulting from normal and malfunctioning flight; (2) Establish any wind constraints under which flight may occur; and (3) Conduct a wind weighting analysis that establishes the launcher azimuth and elevation settings that correct for the windcocking and wind-drift effects on the unguided suborbital launch vehicle. (d) Stability. An unguided suborbital launch vehicle, in all configurations, must be stable throughout each stage of powered flight. (e) Application requirements. An applicant must submit: (1) A description of its wind weighting analysis methods, including its method and schedule of determining wind speed and wind direction for each altitude layer; (2) A description of its wind weighting safety system and identify all equipment used to perform the wind weighting analysis; (3) A representative wind weighting analysis using actual or statistical winds for the launch area and provide samples of the output; and (4) Additional products that allow an independent analysis, as requested by the Administrator.

Prescribed Hazard Controls

Sec. 450.143 Safety-critical system design, test, and documentation.

(a) Applicability. This section applies to all safety-critical systems. Flight safety systems that are required to meet the requirements of Sec. 450.101(c) must meet additional requirements in Sec. 450.145. (b) Fault-tolerant design. An operator must design safety-critical systems to be fault-tolerant such that there is no single credible fault that can lead to increased risk to public safety beyond nominal safety-critical system operation. (c) Qualification testing of design. An operator must functionally demonstrate the design of the vehicle's safety-critical systems at conditions beyond its predicted operating environment. The operator must select environmental test levels that ensure the design is sufficiently stressed to demonstrate that system performance is not degraded due to design tolerances, manufacturing variances, or uncertainties in the environment. (d) Acceptance of hardware. An operator must-- (1) Functionally demonstrate any safety-critical system while exposed to its predicted operating environment with margin to demonstrate that it is free of defects, free of integration and workmanship errors, and ready for operational use; or (2) Combine in-process controls and a quality assurance process to ensure functional capability of any safety-critical system during its service life. (e) Lifecycle of safety-critical systems. (1) The predicted operating environment must be based on conditions predicted to be encountered in all phases of flight, recovery, and transportation. (2) An operator must monitor the flight environments experienced by safety-critical system components to the extent necessary to-- (i) Validate the predicted operating environment; and (ii) Assess the actual component life remaining or adjust any inspection period. (f) Application requirements. An applicant must submit to the FAA the following as part of its application:

[[Page 15437]]

(1) A list and description of each safety-critical system; (2) Drawings and schematics for each safety-critical system; (3) A summary of the analysis to determine the predicted operating environment and duration to be applied to qualification and acceptance testing covering the service life of any safety-critical system; (4) A description of any instrumentation or inspection processes to monitor aging of any safety-critical system; and (5) The criteria and procedures for disposal or refurbishment for service life extension of safety-critical system components.

Sec. 450.145 Flight safety system.

(a) General. For each phase of flight for which an operator must implement flight abort to meet the requirement of Sec. 450.101(c), the operator must use a flight safety system, or other safeguards agreed to by the Administrator, on the launch or reentry vehicle, vehicle component, or payload with the following reliability: (1) If the consequence any vehicle response mode is 1 x 10-2 conditional expected casualties or greater for uncontrolled areas, an operator must employ a flight safety system with design reliability of 0.999 at 95 percent confidence and commensurate design, analysis, and testing; or (2) If the consequence of any vehicle response mode is between 1 x 10-2 and 1 x 10-3 conditional expected casualties for uncontrolled areas, an operator must employ a flight safety system with a design reliability of 0.975 at 95 percent confidence and commensurate design, analysis, and testing. (b) Accepted means of compliance. To comply with paragraph (a) of this section, an applicant must use a means of compliance accepted by the Administrator. (c) Monitoring. An operator must monitor the flight environments experienced by any flight safety system component. (d) Application requirements. An applicant must submit the information identified in paragraphs (d)(1) through (5) of this section, for any flight safety system including any flight safety system located on board a launch or reentry vehicle; any ground based command control system; any support system, including telemetry subsystems and tracking subsystems, necessary to support a flight abort decision; and the functions of any personnel who operate the flight safety system hardware or software: (1) Flight safety system description. An applicant must describe the flight safety system and its operation in detail, including all components, component functions, and possible operational scenarios. (2) Flight safety system diagram. An applicant must submit a diagram that identifies all flight safety system subsystems and shows the interconnection of all the elements of the flight safety system. The diagram must include any subsystems used to implement flight abort both on and off the vehicle, including any subsystems used to make the decision to abort flight. (3) Flight safety system analyses. An applicant must submit any analyses and detailed analysis reports of all flight safety system subsystems necessary to demonstrate the reliability and confidence levels required by paragraph (a) of this section. (4) Tracking validation procedures. An applicant must document and submit the procedures for validating the accuracy of any vehicle tracking data utilized by the flight safety system to make the decision to abort flight. (5) Flight safety system test plans. An applicant must submit acceptance, qualification, and preflight test plans of any flight safety system, subsystems, and components. The test plans must include test procedures and test environments.

Sec. 450.147 Agreements.

(a) General. An operator must establish a written agreement with any entity that provides a service or property that meets a requirement in this part, including: (1) Launch and reentry site use agreements. A Federal launch range operator, a licensed launch or reentry site operator, or any other person that provides services or access to or use of property required to support the safe launch or reentry under this part; (2) Agreements for notices to mariners. Unless otherwise addressed in agreements with the site operator, for overflight of navigable water, the U.S. Coast Guard or other applicable maritime authority to establish procedures for the issuance of a Notice to Mariners prior to a launch or reentry and other measures necessary to protect public health and safety; (3) Agreements for notices to airmen. Unless otherwise addressed in agreements with the site operator, the FAA Air Traffic Organization or other applicable air navigation authority to establish procedures for the issuance of a Notice to Airmen prior to a launch or reentry, for closing of air routes during the respective launch and reentry windows, and for other measures necessary to protect public health and safety; and (4) Mishap response. Emergency response providers, including local government authorities, to satisfy the requirements of Sec. 450.173. (b) Roles and responsibilities. The agreements required in this section must clearly delineate the roles and responsibilities of each party to support the safe launch or reentry under this part. (c) Effective date. The agreements required in this section must be in effect before a license can be issued, unless otherwise agreed to by the Administrator. (d) Application requirement. The applicant must describe each agreement in this section. The applicant must provide a copy of any agreement, or portion thereof, to the FAA upon request.

Sec. 450.149 Safety-critical personnel qualifications.

(a) Qualification requirements. An operator must ensure safety- critical personnel are trained, qualified, and capable of performing their safety-critical tasks, and that their training is current. (b) Application requirements. An applicant must-- (1) Identify safety-critical tasks that require qualified personnel; (2) Provide internal training and currency requirements, completion standards, or any other means of demonstrating compliance with the requirements of this section; and (3) Describe the process for tracking training currency.

Sec. 450.151 Work shift and rest requirements.

(a) General. For any launch or reentry, an operator must document and implement rest requirements that ensure safety-critical personnel are physically and mentally capable of performing all assigned tasks. (b) Specific items to address. An operator's rest requirements must address the following: (1) Duration of each work shift and the process for extending this shift, including the maximum allowable length of any extension; (2) Number of consecutive work shift days allowed before rest is required; (3) Minimum rest period required-- (i) Between each work shift, including the period of rest required immediately before the flight countdown work shift; and (ii) After the maximum number of work shift days allowed; and

[[Page 15438]]

(4) Approval process for any deviation from the rest requirements. (c) Application requirements. An applicant must submit rest rules that demonstrate compliance with the requirements of this section.

Sec. 450.153 Radio frequency management.

(a) Frequency management. For any radio frequency used, an operator must-- (1) Identify each frequency, all allowable frequency tolerances, and each frequency's intended use, operating power, and source; (2) Provide for the monitoring of frequency usage and enforcement of frequency allocations; and (3) Coordinate use of radio frequencies with any site operator and any local and Federal authorities. (b) Application requirements. An applicant must submit procedures or other means to demonstrate compliance with the radio frequency requirements of this section.

Sec. 450.155 Readiness.

(a) Flight readiness. An operator must document and implement procedures to assess readiness to proceed with the flight of a launch or reentry vehicle. These procedures must address, at minimum, the following: (1) Readiness of vehicle and launch, reentry, or landing site, including any contingency abort location; (2) Readiness of safety-critical personnel, systems, software, procedures, equipment, property, and services; and (3) Readiness to implement the mishap plan required by Sec. 450.173. (b) Application requirements. An applicant must-- (1) Demonstrate compliance with the requirements of paragraph (a) of this section through procedures that may include a readiness meeting close in time to flight; and (2) Describe the criteria for establishing readiness to proceed with the flight of a launch or reentry vehicle.

Sec. 450.157 Communications.

(a) Communication procedures. An operator must implement communication procedures during the countdown and flight of a launch or reentry vehicle that-- (1) Define the authority of personnel, by individual or position title, to issue ``hold/resume,'' ``go/no go,'' and abort commands; (2) Assign communication networks so that personnel identified in paragraph (a)(1) of this section have direct access to real-time safety-critical information required to issue ``hold/resume,'' ``go/no go,'' and any abort commands; (3) Ensure personnel, identified in paragraph (a)(1) of this section, monitor each common intercom channel during countdown and flight; and (4) Implement a protocol for using defined radio telephone communications terminology. (b) Currency. An operator must ensure the currency of the communication procedures, and that all personnel are working with the approved version of the communication procedures. (c) Communication records. An operator must record all safety- critical communications network channels that are used for voice, video, or data transmissions that support safety critical systems during each countdown.

Sec. 450.159 Preflight procedures.

(a) Preflight procedures. An operator must implement preflight procedures that-- (1) Verify that each flight commit criterion is satisfied before flight is initiated; and (2) Ensure the operator can return the vehicle to a safe state after a countdown abort or delay. (b) Currency. An operator must ensure the currency of the preflight procedures, and that all personnel are working with the approved version of the preflight procedures.

Sec. 450.161 Surveillance and publication of hazard areas.

(a) General. The operator must publicize, survey, and evacuate each flight hazard area prior to initiating flight of a launch vehicle or the reentry of a reentry vehicle to the extent necessary to ensure compliance with Sec. 450.101. (b) Verification. The launch or reentry operator must perform surveillance sufficient to verify or update the assumptions, input data, and results of the flight safety analyses. (c) Publication. An operator must publicize warnings for each flight hazard area, except for regions of land, sea, or air under the control of the vehicle operator, site operator, or other entity by agreement. If the operator relies on another entity to publicize these warnings, it must verify that the warnings have been issued. (d) Application requirements. An applicant must submit: (1) A description of how it will provide for day-of-flight surveillance of flight hazard areas, if necessary, to ensure that the presence of any member of the public in or near a flight hazard area is consistent with flight commit criteria developed for each launch or reentry as required by Sec. 450.165(b); and (2) A description of how it will establish flight commit criteria based on the results of its toxic release hazard analysis, containment analysis, or toxic risk assessment for any necessary evacuation of the public from any toxic hazard area.

Sec. 450.163 Lightning hazard mitigation.

(a) Lighting hazard mitigation. An operator must-- (1) Establish flight commit criteria that mitigate the potential for a launch or reentry vehicle intercepting or initiating a lightning strike, or encountering a nearby discharge, using a means of compliance accepted by the Administrator; (2) Use a vehicle designed to continue safe flight in the event of a direct lightning strike or nearby discharge; or (3) Ensure compliance with Sec. 450.101, given any direct lightning strike or an encounter with a nearby discharge. (b) Application requirements. (1) An applicant electing to comply with paragraph (a)(1) of this section must submit flight commit criteria that mitigate the potential for a launch or reentry vehicle intercepting or initiating a direct lightning strike, or encountering a nearby lightning discharge. (2) An applicant electing to comply with paragraph (a)(2) of this section must submit documentation providing evidence that the vehicle is designed to protect safety-critical systems against the effects of a direct lightning strike or nearby discharge. (3) An applicant electing to comply with paragraph (a)(3) of this section must submit documentation providing evidence that the safety criteria in Sec. 450.101 will be met given any direct lightning strike or an encounter with a nearby discharge.

Sec. 450.165 Flight safety rules.

(a) General. For each launch or reentry, an operator must establish and observe flight safety rules that govern the conduct of the launch or reentry. (b) Flight commit criteria. The flight safety rules must include flight commit criteria that identify each condition necessary prior to flight of a launch vehicle or the reentry of a reentry vehicle to satisfy the requirements of Sec. 450.101, and must include: (1) Surveillance of any region of land, sea, or air in accordance with Sec. 450.161; (2) Monitoring of any meteorological condition necessary to-- (i) Be consistent with any safety analysis required by this part; and (ii) If necessary in accordance with Sec. 450.163, mitigate the potential for a launch or reentry vehicle intercepting a lightning strike, or encountering a nearby discharge;

[[Page 15439]]

(3) Implementation of any launch or reentry window closure in the launch or reentry window for the purpose of collision avoidance in accordance with Sec. 450.169; (4) Confirmation that any safety-critical system is ready for flight; (5) For any reentry vehicle, except a suborbital vehicle, monitoring by the operator or an on board system that the status of safety-critical systems are healthy before enabling reentry flight, to assure the vehicle can reenter safely to Earth; and (6) Any other hazard controls derived from any safety analysis required by this part. (c) Flight abort rules. (1) For a vehicle that uses a flight safety system, the flight safety rules must identify the conditions under which the flight safety system, including the functions of any flight abort crew, must abort the flight to: (i) Ensure compliance with Sec. 450.101; and (ii) Prevent debris capable of causing a casualty from impacting in uncontrolled areas if the vehicle is outside the limits of a useful mission. (2) Vehicle data required to evaluate flight abort rules must be available to the flight safety system across the range of normal and malfunctioning flight. (3) The flight abort rules must include the following: (i) The flight safety system must abort flight when valid, real- time data indicate the vehicle has violated any flight safety limit; (ii) The flight safety system must abort flight when the vehicle state approaches conditions that are anticipated to compromise the capability of the flight safety system and further flight has the potential to violate a flight safety limit; (iii) The flight safety system must incorporate data loss flight times to abort flight at the first possible violation of a flight safety limit, or earlier, if valid tracking data is insufficient for evaluating a minimum set of flight abort rules required to maintain compliance with Sec. 450.101; and (iv) Flight may continue past any gate established under Sec. 450.125 only if the parameters used to establish the ability of the vehicle to complete a useful mission are within limits. (d) Application requirements. An applicant must submit: (1) For flight commit criteria, a list of all flight commit criteria; and (2) For flight abort rules: (i) A description of each rule, and the parameters that will be used to evaluate each rule; (ii) A list that identifies the rules necessary for compliance with each requirement in Sec. 450.101; and (iii) A description of the vehicle data that will be available to evaluate flight abort rules across the range of normal and malfunctioning flight.

Sec. 450.167 Tracking.

(a) Vehicle tracking. During the flight of a launch or reentry vehicle, an operator must measure and record in real time the position and velocity of the vehicle. The system used to track the vehicle must provide data to determine the actual impact locations of all stages and components, and to obtain vehicle performance data for comparison with the preflight performance predictions. (b) Application requirements. An applicant must identify and describe each method or system used to meet the tracking requirements of paragraph (a) of this section.

Sec. 450.169 Launch and reentry collision avoidance analysis requirements.

(a) Criteria. For an orbital or suborbital launch or reentry, an operator must establish window closures needed to ensure that the launch or reentry vehicle, any jettisoned components, or payloads meet the following requirements with respect to orbiting objects, not including any object being launched or reentered. (1) For inhabitable objects, one of three criteria in paragraphs (a)(1)(i) through (iii) of this section must be met: (i) The probability of collision between the launching or reentering objects and any inhabitable object must not exceed 1 x 10-6; (ii) The launching or reentering objects must maintain an ellipsoidal separation distance of 200 km in-track and 50 km cross- track and radially from the inhabitable object; or (iii) The launching or reentering objects must maintain a spherical separation distance of 200 km from the inhabitable object. (2) For objects that are neither orbital debris nor inhabitable, one of the two criteria in paragraphs (a)(2)(i) and (ii) of this section must be met: (i) The probability of collision between the launching or reentering objects and any object must not exceed 1 x 10-5; or (ii) The launching or reentering objects must maintain a spherical separation distance of 25 km from the object. (3) For all other known orbital debris identified by the FAA or other Federal Government entity as 10 cm squared or larger, the launching or reentering objects must maintain a spherical separation distance of 2.5 km from the object. (b) Screening time. A launch or reentry operator must ensure the requirements of paragraph (a) of this section are follows: (1) Through the entire flight of a suborbital launch vehicle; (2) For an orbital launch, during ascent from a minimum of 150 km to initial orbital insertion and for a minimum of 3 hours from liftoff; (3) For reentry, during descent from initial reentry burn to 150 km altitude; and (4) For disposal, during descent from initial disposal burn to 150 km altitude. (c) Rendezvous. Planned rendezvous operations that occur within the screening time frame are not considered a violation of collision avoidance if the involved operators have pre-coordinated the rendezvous or close approach. (d) Analysis not required. A launch collision avoidance analysis is not required if the maximum altitude attainable by a launch operator's suborbital launch vehicle and any released debris is less than 150 km. The maximum altitude attainable means an optimized trajectory, assuming maximum performance within 99.7% confidence bounds, extended through fuel exhaustion of each stage, to achieve a maximum altitude. (e) Analysis. Collision avoidance analysis must be obtained for each launch or reentry from a Federal entity identified by the FAA. (1) An operator must use the results of the collision avoidance analysis to establish flight commit criteria for collision avoidance; and (2) Account for uncertainties associated with launch or reentry vehicle performance and timing, and ensure that each window closure incorporates all additional time periods associated with such uncertainties. (f) Timing and information required. An operator must prepare a collision avoidance analysis worksheet for each launch or reentry using a standardized format that contains the input data required by appendix A to this part, as follows: (1) An operator must file the input data with a Federal entity identified by the FAA and the FAA at least 15 days before the first attempt at the flight of a launch vehicle or the reentry of a reentry vehicle, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter; (2) An operator must obtain a collision avoidance analysis performed by a Federal entity identified by the FAA 6 hours before the beginning of a launch or reentry window; and (3) If an operator needs an updated collision avoidance analysis due to a launch or reentry delay, the operator

[[Page 15440]]

must file the request with the Federal entity and the FAA at least 12 hours prior to the beginning of the new launch or reentry window.

Sec. 450.171 Safety at end of launch.

(a) Debris mitigation. An operator must ensure for any proposed launch that for all vehicle stages or components that reach Earth orbit-- (1) There is no unplanned physical contact between the vehicle or any of its components and the payload after payload separation; (2) Debris generation does not result from the conversion of energy sources into energy that fragments the vehicle or its components. Energy sources include chemical, pressure, and kinetic energy; and (3) For all vehicle stages or components that are left in orbit, stored energy is removed by depleting residual fuel and leaving all fuel line valves open, venting any pressurized system, leaving all batteries in a permanent discharge state, and removing any remaining source of stored energy. (b) Application requirements. An applicant must demonstrate compliance with the requirements in paragraph (a) of this section.

Sec. 450.173 Mishap plan--reporting, response, and investigation requirements.

(a) General. An operator must report, respond, and investigate class 1, 2, 3, and 4 mishaps, as defined in Sec. 401.5 of this chapter, in accordance with paragraphs (b) through (h) of this section using a plan or other written means. (b) Responsibilities. An operator must document-- (1) Responsibilities for personnel assigned to implement the requirements of this section; (2) Reporting responsibilities for personnel assigned to conduct investigations and for anyone retained by the licensee to conduct or participate in investigations; and (3) Allocation of roles and responsibilities between the launch operator and any site operator for reporting, responding to, and investigating any mishap during ground activities at the site. (c) Cooperation with FAA and NTSB. An operator must report to, and cooperate with, the FAA and NTSB investigations and designate one or more points of contact for the FAA and NTSB. (d) Mishap reporting requirements. An operator must-- (1) Immediately notify the FAA Washington Operations Center in case of a mishap that involves a fatality or serious injury (as defined in 49 CFR 830.2); (2) Notify within 24 hours the FAA Washington Operations Center in the case of a mishap that does not involve a fatality or serious injury (as defined in 49 CFR 830.2); and (3) Submit a written preliminary report to the FAA Office of Commercial Space Transportation within five days of any mishap. The preliminary report must include the following information, as applicable: (i) Date and time of the mishap; (ii) Description of the mishap and sequence of events leading to the mishap, to the extent known; (iii) Intended and actual location of the launch or reentry or other landing on Earth; (iv) Vehicle or debris impact points, including those outside a planned landing or impact area; (v) Identification of the vehicle; (vi) Identification of any payload; (vii) Number and general description of any fatalities or injuries; (viii) Description and estimated costs of any property damage; (ix) Identification of hazardous materials, as defined in Sec. 401.5 of this chapter, involved in the event, whether on the vehicle, any payload, or on the ground; (x) Action taken by any person to contain the consequences of the event; (xi) Weather conditions at the time of the event; and (xii) Potential consequences for other similar vehicles, systems, or operations. (e) Emergency response requirements. An operator must-- (1) Activate emergency response services to protect the public following a mishap as necessary including, but not limited to: (i) Evacuating and rescuing members of the public, taking into account debris dispersion and toxic plumes; and (ii) Extinguishing fires; (2) Maintain existing hazard area surveillance and clearance as necessary to protect public safety; (3) Contain and minimize the consequences of a mishap, including: (i) Securing impact areas to ensure that no members of the public enter; (ii) Safely disposing of hazardous materials; and (iii) Controlling hazards at the site or impact areas; (4) Preserve data and physical evidence; and (5) Implement agreements with government authorities and emergency response services, as necessary, to satisfy the requirements of this section. (f) Mishap investigation requirements. In the event of a mishap, an operator must-- (1) Investigate the root causes of the mishap; and (2) Report investigation results to the FAA. (g) Preventative measures. An operator must identify and implement preventive measures for avoiding recurrence of the mishap prior to the next flight, unless otherwise approved by the Administrator. (h) Mishap records. An operator must maintain records associated with the mishap in accordance with Sec. 450.219(b). (i) Application requirements. An applicant must submit the plan or other written means required by this section.

Sec. 450.175 Test-induced damage.

(a) Coordination of anticipated test-induced damage. Test-induced damage is not a mishap if all of the following are true: (1) An operator coordinates potential test-induced damage with the FAA before the planned activity, and with sufficient time for the FAA to evaluate the operator's proposal during the application process or as a license modification; and (2) The test-induced damage did not result in any of the following: (i) Serious injury or fatality (as defined in 49 CFR 830.2); (ii) Damage to property not associated with the licensed activity; and (iii) Hazardous debris leaving the pre-defined hazard area; or (3) The test-induced damage falls within the scope of activities coordinated with the FAA in paragraph (a)(1) of this section. (b) Application requirements. An applicant must submit the following information: (1) Test objectives; (2) Test limits; (3) Expected outcomes; (4) Potential risks, including the applicant's best understanding of the uncertainties in environments, test limits, or system performance; (5) Applicable procedures; (6) Expected time and duration of the test; and (7) Additional information as required by the FAA to ensure protection of public health and safety, safety of property, and the national security and foreign policy interests of the United States.

Sec. 450.177 Unique policies, requirements, and practices.

(a) Operator identified unique hazards. An operator must review operations, system designs, analysis, and testing, and identify any unique hazards not otherwise addressed by this part. An operator must implement any

[[Page 15441]]

unique safety policy, requirement, or practice needed to protect the public from the unique hazard. (b) FAA unique policy, requirement, or practice. The FAA may identify and impose a unique policy, requirement, or practice as needed to protect the public health and safety, safety of property, and the national security and foreign policy interests of the United States. (c) Application requirements. (1) An operator must identify any unique safety policy, requirement, or practice necessary in accordance with paragraph (a) of this section, and demonstrate that each unique safety policy, requirement, or practice protects public health and safety and the safety of property. (2) An operator must demonstrate that each unique safety policy, requirement, or practice imposed by the FAA in accordance with paragraph (b) of this section, protects public health and safety, safety of property, and the national security and foreign policy interests of the United States.

Ground Safety

Sec. 450.179 Ground safety--general.

At a U.S. launch or reentry site, an operator must protect the public from adverse effects of hazardous operations and systems associated with-- (a) Preparing a launch vehicle for flight; (b) Returning a launch or reentry vehicle to a safe condition after landing, or after an aborted launch attempt; and (c) Returning a site to a safe condition.

Sec. 450.181 Coordination with a site operator.

(a) General. For a launch or reentry conducted from or to a Federal launch or reentry site or a site licensed under part 420 or 433 of this chapter, an operator must coordinate with the site operator to ensure-- (1) Public access is controlled where and when necessary to protect public safety; (2) Launch or reentry operations are coordinated with other launch and reentry operators and other affected parties to prevent unsafe interference; (3) Any ground hazard area that affects the operations of a launch or reentry site is coordinated with the Federal or licensed launch or reentry site operator; and (4) Prompt and effective response in the event of a mishap that could impact public safety. (b) Licensed site operator. For a launch or reentry conducted from or to a site licensed under part 420 or 433 of this chapter, an operator must also coordinate with the site operator to establish roles and responsibilities for reporting, responding to, and investigating any mishap during ground activities at the site. (c) Application requirements. An applicant must describe how it is coordinating with a Federal or licensed launch or reentry site operator in compliance with this section.

Sec. 450.183 Explosive site plan.

(a) Exclusive use sites. For a launch or reentry conducted from or to a site exclusive to its own use, an operator must comply with the explosive siting requirements of Sec. Sec. 420.63, 420.65, 420.66, 420.67, 420.69, and 420.70 of this chapter. (b) Application requirements. An applicant must submit an explosive site plan in accordance with paragraph (a) of this section.

Sec. 450.185 Ground hazard analysis.

An operator must perform and document a ground hazard analysis, and continue to maintain it throughout the lifecycle of the launch or reentry system. The analysis must-- (a) Hazard identification. Identify system and operation hazards posed by the vehicle and ground hardware, including site and ground support equipment. Hazards identified must include the following: (1) System hazards, including: (i) Vehicle over-pressurization; (ii) Sudden energy release, including ordnance actuation; (iii) Ionizing and non-ionizing radiation; (iv) Fire or deflagration; (v) Radioactive materials; (vi) Toxic release; (vii) Cryogens; (viii) Electrical discharge; and (ix) Structural failure; and (2) Operation hazards, including: (i) Propellant handling and loading; (ii) Transporting of vehicle or vehicle components; (iii) Vehicle testing; and (iv) Vehicle or system activation. (b) Hazard assessment. Assess each hazard's likelihood and severity. (c) Risk criteria. Ensure that the risk associated with each hazard meets the following criteria: (1) The likelihood of any hazardous condition that may cause death or serious injury to the public must be extremely remote; and (2) The likelihood of any hazardous condition that may cause major damage to public property or critical assets must be remote. (d) Risk elimination and mitigation. Identify and describe the risk elimination and mitigation measures required to satisfy paragraph (c) of this section. (e) Validation and verification. Demonstrate that the risk elimination and mitigation measures achieve the risk levels of paragraph (c) of this section through validation and verification. Verification includes: (1) Analysis; (2) Test; (3) Demonstration; or (4) Inspection. (f) Application requirements. An applicant must submit-- (1) A description of the methodology used to perform the ground hazard analysis; (2) A list of all systems and operations that may cause a hazard involving the vehicle or any payload; and (3) The ground hazard analysis products of paragraphs (a) through (e) of this section, including data that verifies the risk elimination and mitigation measures.

Sec. 450.187 Toxic hazards mitigation for ground operations.

(a) Applicability. This section applies to any launch or reentry vehicle, including all vehicle components and payloads, that use toxic propellants or other toxic chemicals. (b) Toxic release hazard analysis. An operator must conduct a toxic release hazard analysis that-- (1) Accounts for any toxic release that could occur during nominal or non-nominal launch or reentry ground operations; (2) Includes a worst-case release scenario analysis or a maximum- credible release scenario analysis for each process that involves a toxic propellant or other chemical; (3) Determines if toxic release can occur based on an evaluation of the chemical compositions and quantities of propellants, other chemicals, vehicle materials, and projected combustion products, and the possible toxic release scenarios; (4) Accounts for both normal combustion products and any unreacted propellants and phase change or chemical derivatives of released substances; and (5) Accounts for any operational constraints and emergency procedures that provide protection from toxic release. (c) Toxic containment. An operator using toxic containment must manage the risk of casualty from the exposure to toxic release either by-- (1) Evacuating, or being prepared to evacuate, the public from a toxic hazard area, where an average member of the public would be exposed to greater than one percent conditional individual probability of casualty in the event of a

[[Page 15442]]

worst-case release or maximum credible release scenario; or (2) Employing meteorological constraints to limit a ground operation to times during which prevailing winds and other conditions ensure that an average member of the public would not be exposed to greater than one percent conditional individual probability of casualty in the event of a worst-case release or maximum credible release scenario. (d) Toxic risk assessment. An operator using toxic risk assessment must manage the risk from any toxic release hazard and demonstrate compliance with the criteria in Sec. 450.109(a)(3). A toxic risk assessment must-- (1) Account for airborne concentration and duration thresholds of toxic propellants or other chemicals. For any toxic propellant, other chemicals, or combustion product, an operator must use airborne toxic concentration and duration thresholds identified in a means of compliance accepted by the Administrator; (2) Account for physical phenomena expected to influence any toxic concentration and duration in the area surrounding the potential release site; (3) Determine a toxic hazard area for each process, surrounding the potential release site for each toxic propellant or other chemical based on the amount and toxicity of the propellant or other chemical, the exposure duration, and the meteorological conditions involved; (4) Account for all members of the public that may be exposed to the toxic release; and (5) Account for any risk mitigation measures applied in the risk assessment. (e) Application requirements. An applicant must submit: (1) The identity of the toxic propellant, chemical, or toxic combustion products in the possible toxic release; (2) The applicant's selected airborne toxic concentration and duration thresholds; (3) The meteorological conditions for the atmospheric transport and buoyant cloud rise of any toxic release from its source to downwind receptor locations; (4) Characterization of the terrain, as input for modeling the atmospheric transport of a toxic release from its source to downwind receptor locations; (5) The identity of the toxic dispersion model used, and any other input data; (6) Representative results of an applicant's toxic dispersion modeling to predict concentrations and durations at selected downwind receptor locations, to determine the toxic hazard area for a released quantity of the toxic substance; (7) For toxic release hazard analysis in accordance with paragraph (b) of this section: (i) A description of the failure modes and associated relative probabilities for potential toxic release scenarios used in the risk evaluation; and (ii) The methodology and results of an applicant's determination of the worst-case or maximum-credible quantity of any toxic release that might occur during ground operations; (8) For toxic risk assessment in accordance with paragraph (d) of this section: (i) A demonstration that the public will not be exposed to airborne concentrations above the toxic concentration and duration thresholds, based upon the representative results of the toxic release hazard analysis; (ii) The population density in receptor locations that are identified by toxic dispersion modeling as toxic hazard areas; (iii) A description of any risk mitigation measures applied in the toxic risk assessment; and (iv) The identity of the population database used; and (9) Additional products that allow an independent analysis, as requested by the Administrator.

Sec. 450.189 Ground safety prescribed hazard controls.

(a) General. In addition to the hazard controls derived form an operator's ground hazard analysis and toxic hazard analysis, an operator must comply with paragraphs (b) through (e) of this section. (b) Protection of public on the site. An operator must document a process for protecting members of the public who enter any area under the control of a launch or reentry operator, including: (1) Procedures for identifying and tracking the public while on the site; and (2) Methods the operator uses to protect the public from hazards in accordance with the ground hazard analysis and toxic hazard analysis. (c) Countdown abort. Following a countdown abort or recycle operation, an operator must establish, maintain, and perform procedures for controlling hazards related to the vehicle and returning the vehicle, stages, or other flight hardware and site facilities to a safe condition. When a launch vehicle does not liftoff after a command to initiate flight was sent, an operator must-- (1) Ensure that the vehicle and any payload are in a safe configuration; (2) Prohibit entry of the public into any identified hazard areas until the site is returned to a safe condition; and (3) Maintain and verify that any flight safety system remains operational until verification that the launch vehicle does not represent a risk of inadvertent flight. (d) Fire suppression. An operator must have reasonable precautions in place to report and control any fire caused by licensed activities. (e) Emergency procedures. An operator must have general emergency procedures that apply to any emergencies not covered by the mishap plan of Sec. 450.173 that may create a hazard to the public. (f) Application requirements. An applicant must submit the process for protecting members of the public who enter any area under the control of a launch or reentry operator in accordance with paragraph (b) of this section.

Subpart D--Terms and Conditions of a Vehicle Operator License

Sec. 450.201 Public safety responsibility.

A licensee is responsible for ensuring public safety and safety of property during the conduct of a licensed launch or reentry.

Sec. 450.203 Compliance with license.

A licensee must conduct a licensed launch or reentry in accordance with representations made in its license application, the requirements of subpart C of this part and this subpart, and the terms and conditions contained in the license. A licensee's failure to act in accordance with the representations made in the license application, the requirements of subpart C of this part and this subpart, and the terms and conditions contained in the license, is sufficient basis for the revocation of a license or other appropriate enforcement action.

Sec. 450.205 Financial responsibility requirements.

A licensee must comply with financial responsibility requirements as required by part 440 of this chapter and as specified in a license or license order.

Sec. 450.207 Human spaceflight requirements.

A licensee conducting a launch or reentry with a human being on board the vehicle must comply with human spaceflight requirements as required by part 460 of this chapter and as specified in a license or license order.

Sec. 450.209 Compliance monitoring.

(a) A licensee must allow access by, and cooperate with, Federal officers or employees or other individuals authorized by the FAA to observe any of its activities, or of its contractors or

[[Page 15443]]

subcontractors, associated with the conduct of a licensed launch or reentry. (b) For each licensed launch or reentry, a licensee must provide the FAA with a console or other means for monitoring the progress of the countdown and communication on all channels of the countdown communications network. A licensee must also provide the FAA with the capability to communicate with the mission director designated by Sec. 450.103(a)(1). (c) If the FAA finds a licensee has not complied with any of the requirements in subpart C of this part or this subpart, the FAA may require the licensee to revise its procedures to achieve compliance.

Sec. 450.211 Continuing accuracy of license application; application for modification of license.

(a) A licensee is responsible for the continuing accuracy of representations contained in its application for the entire term of the license. After a license has been issued, a licensee must apply to the FAA for modification of the license if-- (1) The licensee proposes to conduct a launch or reentry in a manner not authorized by the license; or (2) Any representation contained in the license application that is material to public health and safety or the safety of property is no longer accurate and complete or does not reflect the licensee's procedures governing the actual conduct of a launch or reentry. A change is material to public health and safety or the safety of property if it alters or affects the-- (i) Class of payload; (ii) Type of launch or reentry vehicle; (iii) Type or quantity of hazardous material; (iv) Flight trajectory; (v) Launch site or reentry site or other landing site; or (vi) Any system, policy, procedure, requirement, criteria, or standard that is safety critical. (b) An application to modify a license must be prepared and submitted in accordance with part 413 of this chapter. If requested during the application process, the FAA may approve an alternate method for requesting license modifications. The licensee must indicate any part of its license or license application that would be changed or affected by a proposed modification. (c) Upon approval of a modification, the FAA issues either a written approval to the licensee or a license order amending the license if a stated term or condition of the license is changed, added, or deleted. An approval has the full force and effect of a license order and is part of the licensing record.

Sec. 450.213 Preflight reporting.

(a) Preflight reporting methods. An operator must send the information in this section as an email attachment to [email protected], or other method as agreed to by the Administrator in the license. (b) Mission information. A licensee must submit to the FAA the following mission-specific information not less than 60 days before each mission conducted under the license, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter in the license, except when the information was provided in the license application: (1) Payload information in accordance with Sec. 450.43(i); and (2) Flight information, including the vehicle, launch site, planned flight path, staging and impact locations, each payload delivery point, intended reentry or landing sites including any contingency abort location, and the location of any disposed launch or reentry vehicle stage or component that is deorbited. (c) Flight safety analysis products. An operator must submit to the FAA updated flight safety analysis products, using previously-approved methodologies, for each mission no less than 30 days before flight, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter in the license. (1) An operator is not required to submit the flight safety analysis products if-- (i) The analysis submitted in the license application satisfies all the requirements of this section; or (ii) The operator demonstrated during the application process that the analysis does not need to be updated to account for mission- specific factors. (2) If the operator is required to submit the flight safety analysis products, the operator-- (i) Must account for vehicle and mission specific input data; (ii) Must account for potential variations in input data that may affect any analysis product within the final 30 days before flight; (iii) Must submit the analysis products using the same format and organization used in its license application; and (iv) May not change an analysis product within the final 30 days before flight unless the operator has a process, approved in the license, for making a change in that period as part of the operator's flight safety analysis process. (d) Flight safety system test data. Any licensee that is required to use a flight safety system to protect public safety as required by Sec. 450.101(c) must submit to the FAA, or provide the FAA access to, any test reports, in accordance with approved flight safety system test plans, no less than 30 days before flight, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter in the license. These reports must include: (1) A summary of the system, subsystem, and component-level test results, including all test failures and corrective actions implemented; (2) A summary of test results demonstrating sufficient margin to predicted operating environments; (3) A comparison matrix of the actual qualification and acceptance test levels used for each component in each test compared against the predicted flight levels for each environment, including any test tolerances allowed for each test; and (4) A clear identification of any components qualified by similarity analysis or a combination of analysis and test. (e) Collision avoidance analysis. In accordance with Sec. 450.169(f), at least 15 days before the first attempt at the flight of a launch vehicle or the reentry of a reentry vehicle, or at least 12 hours prior to the beginning of a new launch or reentry window due to a launch or reentry delay, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter, a licensee must submit to a Federal entity identified by the FAA and the FAA the collision avoidance information in appendix A to this part. (f) Launch or reentry schedule. A licensee must file a launch or reentry schedule that identifies each review, rehearsal, and safety- critical operation. The schedule must be filed and updated in time to allow FAA personnel to participate in the reviews, rehearsals, and safety-critical operations.

Sec. 450.215 Post-flight reporting.

(a) An operator must submit to the FAA the information in paragraph (b) of this section no later than 90 days after a launch or reentry, unless the Administrator agrees to a different time frame in accordance with Sec. 404.15 of this chapter. (b) An operator must send the following information as an email attachment to [email protected], or other method as agreed to by the Administrator in the license: (1) Any anomaly that occurred during countdown or flight that is material to

[[Page 15444]]

public health and safety and the safety of property; (2) Any corrective action implemented or to be implemented after the flight due to an anomaly or mishap; (3) The number of humans on board the vehicle; (4) The actual trajectory flown by the vehicle, if requested by the FAA; and (5) For an unguided suborbital launch vehicle, the actual impact location of all impacting stages and impacting components, if requested by the FAA.

Sec. 450.217 Registration of space objects.

(a) To assist the U.S. Government in implementing Article IV of the 1975 Convention on Registration of Objects Launched into Outer Space, each licensee must submit to the FAA the information required by paragraph (b) of this section for all objects placed in space by a licensed launch, including a launch vehicle and any components, except any object owned and registered by the U.S. Government. (b) For each object that must be registered in accordance with this section, not later than 30 days following the conduct of a licensed launch, an operator must file the following information: (1) The international designator of the space object; (2) Date and location of launch; (3) General function of the space object; (4) Final orbital parameters, including: (i) Nodal period; (ii) Inclination; (iii) Apogee; and (iv) Perigee; and (5) Ownership, and country of ownership, of the space object. (c) A licensee must notify the FAA when it removes an object that it has previously placed in space.

Sec. 450.219 Records.

(a) Except as specified in paragraph (b) of this section, a licensee must maintain for 3 years all records, data, and other material necessary to verify that a launch or reentry is conducted in accordance with representations contained in the licensee's application, the requirements of subpart C of this part and this subpart, and the terms and conditions contained in the license. (b) In the event of a class 1 or class 2 mishap, as defined in Sec. 401.5 of this chapter, a licensee must preserve all records related to the event. Records must be retained until completion of any Federal investigation and the FAA advises the licensee that the records need not be retained. The licensee must make all records required to be maintained under the regulations available to Federal officials for inspection and copying.

Appendix A to Part 450--Collision Analysis Worksheet

(a) Launch or reentry information. An operator must file the following information: (1) Mission name and launch location. A mnemonic given to the launch vehicle/payload combination identifying the launch mission from all others. Launch site location in latitude and longitude; (2) Launch or reentry window. The launch or reentry window opening and closing times in Greenwich Mean Time (referred to as ZULU time) and the Julian dates for each scheduled launch or reentry attempts including primary and secondary launch or reentry dates; (3) Epoch. The epoch time, in Greenwich Mean Time (GMT), of the expected launch vehicle liftoff time; (4) Segment number. A segment is defined as a launch vehicle stage or payload after the thrusting portion of its flight has ended. This includes the jettison or deployment of any stage or payload. For each segment, an operator must determine the orbital parameters; (5) Orbital parameters. An operator must identify the orbital parameters for all objects achieving orbit including the parameters for each segment after thrust end (such as SECO-1 and SECO-2); (6) Orbiting objects to evaluate. An operator must identify all orbiting object descriptions including object name, length, width, depth, diameter, and mass; (7) Time of powered flight and sequence of events. The elapsed time in hours, minutes, and seconds, from liftoff to passivation or disposal. The input data must include the time of powered flight for each stage or jettisoned component measured from liftoff; and (8) Point of contact. The person or office within an operator's organization that collects, analyzes, and distributes collision avoidance analysis results. (b) Collision avoidance analysis results transmission medium. An operator must identify the transmission medium, such as voice or email, for receiving results. (c) Deliverable schedule/need dates. An operator must identify the times before flight, referred to as ``L-times,'' for which the operator requests a collision avoidance analysis. The final collision avoidance analysis must be used to establish flight commit criteria for a launch. (d) Trajectory files. Individual position and velocity trajectory files, including: (1) The position coordinates in the Earth-Fixed Greenwich (EFG) coordinates coordinate system measured in kilometers and the EFG velocity components measured in kilometers per second, of each launch vehicle stage or payload starting below 150 km through screening time frame; (2) Radar cross section values for each individual file; (3) Covariance, if probability of impact analysis option is desired; and (4) Separate trajectory files identified by valid window time frames, if launch or reentry trajectory changes during launch or reentry window. (e) Screening. An operator must select spherical, ellipsoidal, or collision probability screening as defined in this paragraph (e) for determining any conjunction: (1) Spherical screening. Spherical screening centers a sphere on each orbiting object's center-of-mass to determine any conjunction; (2) Ellipsoidal screening. Ellipsoidal screening utilizes an impact exclusion ellipsoid of revolution centered on the orbiting object's center-of-mass to determine any conjunction. An operator must provide input in the UVW coordinate system in kilometers. The operator must provide delta-U measured in the radial-track direction, delta-V measured in the in-track direction, and delta-W measured in the cross-track direction; or (3) Probability of Collision. Collision probability is calculated using position and velocity information with covariance in both position and velocity.

Issued under authority provided by 49 U.S.C. 106(f) and 51 U.S.C. chapter 509 in Washington, DC, on March 22, 2019. Wayne R. Monteith, Associate Administrator, Office of Commercial Space Transportation. [FR Doc. 2019-05972 Filed 4-12-19; 8:45 am] BILLING CODE 4910-13-P