Skip to content

ANC00LA023

2000-02-02 · FAIRBANKS, Alaska, United States · None · 1 aircraft · Status: Completed

Airport AK28

Current FAA registration · N6381V

Make / Model
LEZA-LOCKWOOD INTERNATIONAL AIR CAM
Year of manufacture
1999 · 1 years old at event
Engine
BOMBARDIER ROTAX (ALL)
Seats / Engines
2 seats · 2 engines
Last airworthiness date
19991019
ADS-B equipped
Yes — Mode-S A85E03

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

The pilot's improper compensation for wind conditions during the single-engine landing. Factors associated with this accident were the pilot's intentional shut down of the left engine, the right crosswind, the icy runway, and the snow berms on the edge of the runway.

Factual narrative

On February 2, 2000, about 1500 Alaska standard time, an experimental Stirling Air Cam airplane, N6381V, sustained substantial damage during landing on runway 18 at the Chena Marina Airport, Fairbanks, Alaska. The solo commercial pilot was not injured. The local personal flight was operated under 14 CFR Part 91, and originated about 1430 from the Chena Marina Airport. Visual meteorological conditions prevailed at the time of the accident, and no flight plan was filed. According to an FAA inspector, the pilot stated in an interview on February 3, that during the flight the left engine cylinder head temperature began to overheat, so he elected to shut that engine down. The pilot told the FAA inspector that during landing, the winds were blowing and gusting from the right. During landing roll, a wind gust lifted the right wing. The pilot added power to the operating (right) engine, and the airplane departed the left side of the 4,700 feet long, snow-covered runway, and struck a snow berm. The airplane sustained substantial damage to both landing gear, the landing gear attachment bulkhead, and two leading edge ribs (battons). The pilot stated in his NTSB Pilot/Operator report that there were high winds above 1,000 feet agl. He indicated that he intentionally shut down the left engine due to high cylinder head temperature. He stated that during the landing flare, a wind gust combined with a slick runway pushed the airplane to the left. He wrote that he added power on the operating (right) engine attempting to straighten the airplane, and struck the berm. He added in his report that he could have restarted the left engine for the landing. The commercial pilot was on a local pleasure flight in his experimental airplane. During the flight the left engine cylinder head temperature began to overheat, and he elected to shut that engine down. The pilot stated that during landing, the winds were blowing and gusting from the right. During landing roll, a wind gust lifted the right wing. The pilot added power to the operating (right) engine, the airplane departed the left side of the snow-covered runway, and struck a snow berm. The pilot wrote in his NTSB Pilot/Operator report that he could have restarted the left engine for the landing. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2000_ANC00LA023.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.