ANC98LA056
1998-05-21 · QUINHAGAK, Alaska, United States · None · 1 aircraft · Status: Completed
Airport AQH
Aircraft involved
Probable cause & findings
The pilot's failure to maintain directional control of the airplane, and his premature liftoff, resulting in a collision with a runway light fixture. Factors in the accident were wet runway conditions, and a rough and uneven runway surface with potholes.
Factual narrative
On May 21, 1998, about 1630 Alaska daylight time, a Cessna 207 airplane, N755AB, sustained substantial damage during takeoff from the Quinhagak Airport, Quinhagak, Alaska. The airplane was being operated as a visual flight rules (VFR) scheduled passenger flight under Title 14 CFR Part 135, when the accident occurred. The airplane was operated by Yute Air Alaska Inc., Anchorage, Alaska. The certificated commercial pilot, and two passengers, were not injured. Visual meteorological conditions prevailed. VFR company flight following procedures were in effect. The operator reported the pilot was departing runway 04 at Quinhagak. The center of the runway surface had numerous puddles of water. During the takeoff roll, the left main wheel entered a mud puddle, and the airplane veered to the left. The pilot corrected to the right, and raised the airplane's nose to lift off into ground effect, and avoid any more areas of water. The airplane descended slightly, and the pilot lowered the nose to gain airspeed. The airplane climbed away from the runway, and the pilot continued to the destination of Bethel, Alaska. Upon landing, the pilot discovered damage to the outboard end of the left horizontal stabilizer. The operator reported the airplane struck a runway edge light at Quinhagak. On May 26, 1998, the operator's Director of Maintenance reported the company replaced the entire left stabilizer. On May 27, 1998, a Federal Aviation Administration (FAA) airworthiness inspector, Anchorage Flight Standards District Office (FSDO), reported the damage to the stabilizer would necessitate the replacement of the outboard nose rib. The Alaska Supplement/Airport Facility Directory for Quinhagak states, in part: "Airport remarks - Unattended. Runway condition not monitored, recommend visual inspection prior to using. Potholes entire length of runway. Runway 04-22 marked with reflective cones and threshold panels, some are damaged and obscured by brush. Equipment occasionally on runway. Runway 04-22 may flood. North side of runway lined with sandbags. East edge of apron undercut by river washout." On August 28, 1998, the manager of the Alaska Department of Transportation (AKDOT) office, Bethel, Alaska, reported that the Bethel office is responsible for 26 rural village airports. Runway maintenance is conducted by State of Alaska personnel on an as-needed basis. All of the runways are inspected each calendar quarter, but no firm schedule is established. Access to the villages, and the ability to conduct any runway grading, is weather and ground condition dependent. The Bethel office has two runway maintenance personnel, and one electrician. Runway conditions are usually reported to the State of Alaska by pilots of the air charter companies that fly into the villages. If State personnel cannot conduct runway maintenance at a particular village, the reported runway conditions are listed in FAA Notices to Airmen (NOTAMs). The Bethel AKDOT office indicated a NOTAM was issued on May 4, 1998, that cautioned pilots about men and equipment working on the south 1,300 feet of the runway at Quinhagak. The NOTAM was put into effect for the purpose of grading the runway. The pilot was departing a rural village runway with two passengers on an air taxi flight. The center of the runway surface had numerous puddles of water. During the takeoff roll, the left main wheel entered a mud puddle, and the airplane veered to the left. The pilot corrected to the right, and raised the airplane's nose to lift off into ground effect, and avoid any more areas of water. The airplane descended slightly, and the pilot lowered the nose to gain airspeed. The airplane climbed away from the runway, and the pilot continued to the destination airport. Upon landing, the pilot discovered damage to the outboard end of the left horizontal stabilizer. The operator reported the airplane struck a runway edge light. An FAA airworthiness inspector reported that the damage to the stabilizer would necessitate the replacement of the outboard nose rib. The Airport Facility Directory listing for the accident airport indicated that potholes were present along the entire length of the runway. The runway was graded about 2 weeks before the accident. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1998_ANC98LA056.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (maintenance). All research papers
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA) From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- Semantic Scholar 2026 · Article (Reliability Engineering & System Safety) Understanding human error in military aviation maintenance: The role of Performance shaping factors, cognitive workload and error orientation
- Semantic Scholar 2025 · Article (Applied Sciences) Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Semantic Scholar 2024 · Article (Defence Science Journal) Modelling of Human Factors in Aviation Maintenance Using HFACS ME Human Factors Analysis and Classification System Maintenance Extension and Bayesian Network
Aircraft maintenance is a complex task involving a skilled human workforce, spare parts, and various other resources. Human factors are an inherent element of the human workforce.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…