Skip to content

ATL03LA110

2003-06-21 · Hatteras, North Carolina, United States · None · 1 aircraft · Status: Completed

Airport HSE

Current FAA registration · N9234Z

Make / Model
PIPER PA-28-236
Year of manufacture
1995 · 8 years old at event
Engine
LYCOMING 0-540 SERIES (250 hp)
Seats / Engines
4 seats · 1 engine
Last airworthiness date
19950126
ADS-B equipped
Yes — Mode-S ACCC4B

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

The pilot's failure to maintain directional control during the landing roll. A factor was a go-around not performed.

Factual narrative

On June 21, 2003, at 1330 eastern daylight time, a Piper PA-28-236, N9234Z, registered to and operated by a private pilot, veered off the left side of runway 7 and collided with the ground during an attempted landing at Billy Martin Field in Hatteras, North Carolina. The personal flight operated under the provisions of Title 14 CFR Part 91 with no flight plan filed. Visual weather conditions prevailed at the time of the accident. The airplane sustained substantial damage. The pilot and his passenger were not injured. The flight departed Tarboro, North Carolina, at 1230, on June 21, 2003. According to the pilot, upon arriving at Billy Martin Field, he established a final approach to land on runway 7. The pilot described the approach as fast and high. The airplane touched down beyond the halfway point on the 3000-feet long runway. The pilot said after the airplane bounced at touchdown, it veered 55 feet off the left side of the runway and collided with a sand dune. The pilot did not report any mechanical malfunctions with the airplane. Examination of the airplane revealed left and right wing damage and fuselage damage in the area of the left wing root. The broken nose wheel was also torn from the airframe. The pilot stated that this accident could have been prevented if he had executed a go-around before the airplane touched down on the runway. According to the pilot, upon arriving at the destination airport he established a final approach to land on runway 7. The pilot described the approach as fast and high, and the airplane touched down beyond the halfway point on the 3000-foot long runway. The pilot said after the airplane bounced at touchdown, it veered 55 feet off the left side of the runway and collided with a sand dune. The pilot did not report any mechanical malfunctions with the airplane. Examination of the airplane revealed left and right wing damage and fuselage damage in the area of the left wing root. The broken nose wheel was also torn from the airframe. The pilot stated that this accident could have been prevented if he had executed a go-around before the airplane touched down on the runway. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2003_ATL03LA110.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

Matched on aircraft type or causal vocabulary (go-around). All research papers