ATL05CA125
2005-07-07 · Monroeville, Alabama, United States · None · 1 aircraft · Status: Completed
Airport MVC
Current FAA registration · N98530
- Make / Model
- CESSNA 172P
- Year of manufacture
- 1985 · 20 years old at event
- Engine
- LYCOMING IO-320 SERIES (150 hp)
- Seats / Engines
- 4 seats · 1 engine
- Last airworthiness date
- 19841221
- ADS-B equipped
- Yes — Mode-S ADC091
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The student pilot's failure to maintain directional control and the subsequent collision with the ground during landing.
Factual narrative
On July 7, 2005 at 1050 central daylight time, a Cessna 172P, N98530, registered to and operated by Eglin Air Force Base Aero Club, collided with a taxi-way berm while landing at Monroe County Airport in Monroeville, Alabama. The instructional flight operated under provision of Title 14 CFR Part 91. Visual meteorological conditions prevailed at the time of the accident and a visual flight plan was filed. The airplane was substantially damaged. The student pilot was not injured. The flight originated from Bob Sikes Airport, Crestview, Florida on July 7, 2005 at 1000. According to the student pilot, he departed Bob Sikes Airport for his first solo cross country flight. Upon making a normal visual approach to land on runway 21, at Monroe County Airport, the student pilot stated that just after touchdown the nose wheel began to shimmy violently. The student pilot stated that back pressure was increased on the yolk to reduce shimming tendencies. Efforts to reduce shimming tendencies inadvertently lifted the airplane off of the runway. After the airplane settled back down on the runway surface , the airplane veered to the left and rolled off of the runway surface, on to the grass. Efforts by the pilot to stop the airplane failed. The airplane continued to roll and subsequently collided with a taxi-way berm. Post-accident examination of the airplane revealed that the nose gear was torn from the airframe, propeller blades were bent aft, and there was damage to the engine firewall. Examination of the airplane failed to disclose any mechanical malfunction. The student pilot did not report any mechanical problem with the airplane during the landing. Upon arriving at the destination airport, the student pilot established an visual approach to and landed on runway 21. After touch down the airplane's nose wheel began to shimmy violently. Directional control of the airplane was lost and the airplane veered to the left off the runway onto the grass and subsequently colliding with a taxi-way berm. Post-accident examination of the airplane revealed that the nose gear was torn from the airframe, the propeller blades were bent aft, and the engine firewall was damaged. The student pilot did not report any mechanical problem with the airplane during the landing. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2005_ATL05CA125.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗