ATL06CA002
2005-10-04 · Pageland, South Carolina, United States · Serious · 1 aircraft · Status: Completed
Airport PYG
Aircraft involved
Probable cause & findings
The pilots failure to maintain flying speed during the go-around, which resulted in a stall and the subsequent collision with trees.
Factual narrative
"This report is based on information received by the NTSB. Additional details may be found in the NTSB's public docket for this case. For further information, please contact the NTSB Office of Public Inquiries." The student pilot was making an approach to land on runway 05 and elected to go-around. As the student pilot initiated the go-around, he made a left 90 degrees turn, the airplane stalled and collided with trees west of the airport. The witness stated that the winds were coming from the right of runway 05, at approximately 13 knots, gusting to 22 to 26 knots. The airplane rested about 250 yards west of the runway in a nose low attitude. The examination of the accident site revealed that there was a narrow vertical swath through the trees to where the airplane rested. Post-accident examination of the airplane revealed that both wings were separated from the airplane and the empennage was damaged. The carburetor heat lever was found in the off position, the throttle control lever was half open, the mixture control lever was retracted 1/2 inch, and the flaps were extended. The pilot did not report a mechanical problem with the airplane. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2005_ATL06CA002.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall, go-around). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- NASA NTRS 2025 · Conference Paper A Training Study to Improve Monitoring During A Go-Around
As part of an FAA program to improve go-around (GA) safety, we were asked to determine if we could improve the performance of the Pilot Monitoring (PM) during a GA maneuver.
- Flight Safety Foundation 2024 · FSF / AeroSafety World Go-Around Safety Forum Findings
Foundation Go-Around Safety Forum technical findings — examines why pilots fail to execute go-arounds when criteria are met (stabilized approach gate not met, energy state out of envelope, traffic con…
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…