Skip to content

ATL95LA117

1995-06-04 · COLUMBIA, South Carolina, United States · None · 1 aircraft · Status: Completed

Airport CAE

Current FAA registration · N7392P

Make / Model
PIPER PA-24-250
Year of manufacture
1961 · 34 years old at event
Engine
LYCOMING 0-540 SERIES (250 hp)
Seats / Engines
4 seats · 1 engine
Last airworthiness date
19610607
ADS-B equipped
Yes — Mode-S A9EF26

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

THE MISALIGNMENT OF THE NOSE GEAR CENTERING TRACK AND ROLLER ASSEMBLIES WHICH PRECLUDED LANDING GEAR EXTENSION.

Factual narrative

On June 4, 1995, at 1029 eastern daylight time, a Piper PA-24- 250, N7392P, landed with the landing gear up after several low passes and attempts to lower the landing gear at Columbia Metropolitan Airport in Columbia, South Carolina. The personal flight operated under the provisions of 14 CFR Part 91 with an instrument flight plan filed. Visual weather conditions prevailed at the time of the accident. The airplane was substantially damaged; the pilot was not injured. The flight departed Winnsboro, South Carolina, at 0945 hours. Upon arriving at Columbia, the pilot discovered that the landing gear would not extend. After several attempts to lower the landing gear, the pilot elected to make a gear up landing. The airplane touched down and skidded 200 feet to a stop. The local fixed base operator recovered the airplane, and parked it on the ramp. An examination of the landing gear system, disclosed that the nose gear roller aligner assembly was positioned outside of the nose gear centering track. This position allowed the nose gear to retract into the wheel well at an angle. The examination of the nose gear retraction and extension assemblies failed to disclose a material failure. The exact means by which the misalignment occurred was not determined. The Pilot failed to complete and return NTSB Form 6120.1/2 (Pilot/Operator Aircraft Accident Report Report)as requested. AFTER SEVERAL ATTEMPTS TO LOWER THE LANDING GEAR, THE PILOT ELECTED TO MAKE A GEAR UP LANDING. EXAMINATION OF THE NOSE GEAR RETRACTION AND EXTENSION SYSTEM FAILED TO DISCLOSE A MATERIAL FAILURE. THE EXAMINATION OF THE NOSE GEAR DISCLOSED THAT THE ROLLER ALIGNER ASSEMBLY WAS DISPLACED OUTSIDE OF THE CENTERING TRACK, AND THE NOSE GEAR RETRACTED INTO THE WHEEL WELL AT AN ANGLE. NO NOSE GEAR ASSEMBLY COMPONENT SHOWED EXCESSIVE WEAR OR FRACTURES. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_1995_ATL95LA117.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.