ATL98LA102
1998-08-05 · NEW BERN, North Carolina, United States · None · 1 aircraft · Status: Completed
Airport EWN
Aircraft involved
Probable cause & findings
The failure of the inner cable of the carburetor heat cable assembly that prevented the application of carburetor heat. Factors were conditions favorable for the formation of carburetor ice.
Factual narrative
On August 5, 1998, at 1750 eastern daylight time, a Piper PA-22, N1266C, ditched in five feet of water, according to the pilot, following a complete loss of engine power near New Bern, North Carolina. The personal flight was operated by the pilot under the provisions of Title 14 CFR Part 91 with no flight plan filed. According to the pilot, visual weather conditions prevailed at the time of the accident. The pilot also reported that the airframe sustained substantial structural damage. The pilot said that he was not injured. The local flight departed New Bern, North Carolina, at 1700. According to the pilot, less than one hour into the flight, the engine developed a rough condition, and he decided to apply carburetor heat. When he pulled the carburetor heat lever to apply heat, the inner cable pulled completely out, and he could not apply carburetor heat. Since the engine power condition continued to deteriorate, the pilot elected to return home. Unable to maintain altitude, and still less than a mile from the shore, the pilot was forced to ditch the airplane about 1500 feet from the shoreline. Examination of the carburetor heat cable assembly disclosed that the inner movable cable was worn to a point. The failure was about eighteen inches from the attach point on the carburetor. The pilot reported that the failed section of the worn inner cable was positioned at a bend in the cable assembly. The carburetor heat cable assembly had been installed on the airplane for 800 hours. A review of weather data from the nearest reporting facility revealed that conditions were favorable for the formation of carburetor ice. Less than one hour into the flight, the engine developed a rough condition, and the pilot decided to apply carburetor heat. When he pulled the carburetor heat lever to apply heat, the inner cable pulled completely out, and he could not apply carburetor heat. Since the engine power condition continued to deteriorate, the pilot elected to return home. Unable to maintain altitude, and still less than a mile from the shore, the pilot was forced to ditched the airplane about 1500 feet from the shoreline. Examination of the carburetor heat cable assembly disclosed that the inner movable cable was worn to a point. The cable failed about eighteen inches from the attach point on the carburetor. The pilot reported that the failed section of the worn inner cable was positioned at a bend in the cable assembly. A review of weather data revealed that conditions were favorable for the formation of carburetor ice. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1998_ATL98LA102.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…
- arXiv 2022 · arXiv preprint Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- Embry-Riddle Scholarly Commons 2021 · Journal article (JAAER) Analysis on the Negative Emotional, Physiological, and Cognitive Responses Elicited from of the Activation of a Stall Alarm
Failing to identify an aerodynamic stall can lead to the inability of an aircraft to sustain flight. To warn pilots of an impending or fully-developed stall, many aircraft have safety devices installe…