CEN11CA004

Factual narrative

The flight instructor and student had been practicing touch and go landings. During the attempted full stop landing to runway 36 (1,938 feet long by 50 feet wide, turf), the airplane touched down with "slight extra speed" approximately 100 feet beyond the approach end of the runway. The flight instructor then took the airplane controls and applied brakes; however, there was "no friction on the mowed dry grass." As the airplane approached the end of the runway, the instructor applied left rudder to avoid a ditch in front of the airplane. Subsequently, the right main landing gear went into the ditch and the airplane flipped over. Examination of the airplane revealed the vertical stabilizer and rudder were bent. No mechanical anomalies were reported with the airplane prior to the accident. The instructor reported they should have landed on the adjacent asphalt runway or performed a go-around after "over-shooting final" during the landing. The certificated flight instructor (CFI) and student had been practicing touch-and-go landings and were planning a full-stop landing. The airplane touched down on the grass airstrip slightly faster than normal and approximately 100 feet beyond the approach end of the runway. The CFI took authority of the airplane's controls and applied brakes. As the airplane approached the end of the runway, the CFI applied left rudder to avoid a ditch in front of the airplane. Subsequently, the right main landing gear went into the ditch and the airplane flipped over. Postaccident examination of the airplane revealed that the vertical stabilizer and rudder were bent. The CFI reported that there were no preimpact mechanical anomalies with the airplane. He further stated that they should have landed on the adjacent asphalt runway or performed a go-around after overshooting the final approach leg during the landing. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12

NTSB Findings

FAA avdata. C = Cause, F = Factor.

• C Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Airspeed-Not attained/maintained - C
• C Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Instructor/check pilot - C