CEN11LA173

Factual narrative

On February 3, 2011, at 0840 mountain standard time, a Cessna 402C airplane, N5802C, was substantially damaged during landing at Albuquerque International Sunport Airport (ABQ), Albuquerque, New Mexico, following a hydraulic malfunction and subsequent collapse of the right main landing gear. The airline transport rated pilot was not injured. The non-scheduled cargo flight was being conducted under the provisions of 14 Code of Federal Regulations Part 135 with a visual flight rules (VFR) flight plan. The flight originated at ABQ, with Las Vegas Municipal Airport (LVS), Las Vegas, New Mexico, as the intended destination. Visual meteorological conditions prevailed at the time of the accident. The pilot stated that following gear retraction on initial takeoff from ABQ, the hydraulic pressure caution light illuminated and the nose landing gear failed to retract. The pilot accomplished the HYD PRESSURE LIGHT ILLUMINATED AFTER GEAR CYCLE and the LANDING GEAR WILL NOT EXTEND HYDRAULICALLY checklists and was left with unsafe gear indications. He performed an approved fly over of the ABQ tower and landed after tower personnel reported the gear appeared to be down. During the landing the right main landing gear collapsed, resulting in substantial damage to the right aileron. The airplane was examined by Federal Aviation Administration inspectors and the airplane's operator the day following the accident. The airplane was placed on jacks and the landing gear was functionally tested. The landing gear system was cycled and no anomalies were noted. The hydraulic control valve and the landing gear hydraulic shuttle valve were removed for functional testing and to check for contaminants. No anomalies were found with either unit. Shortly after takeoff, the hydraulic pressure caution light illuminated and the nose gear failed to retract when the pilot attempted to raise the gear. The pilot accomplished the appropriate emergency procedure checklists and unsafe gear indications remained. Following an approved flyover of the tower to verify gear position, the pilot performed a precautionary landing. During the landing the right main landing gear collapsed, resulting in substantial damage. Subsequent examination of the airplane and related hydraulic system components revealed no anomalies and the landing gear system operated normally during functional testing. The reason for the landing gear's failure could not be determined. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12

NTSB Findings

FAA avdata. C = Cause, F = Factor.

• C Aircraft-Aircraft systems-Landing gear system-Gear extension and retract sys-Failure - C
• — Aircraft-Aircraft systems-Landing gear system-Main landing gear-Damaged/degraded