Skip to content

Atlas / NTSB / CEN26FA015

NTSB CAROL · Event

Event CEN26FA015

2025-10-11 Huntington Beach, California, United States Serious 1 aircraft Status: In work

Registry · N222EX

FAA Aircraft Registry record.

Make / Model

BELL 222

Year of manufacture

1980 · 45 years old at event

TCDS

H9SW · BELL HELICOPTER TEXTRON

Engine

ROLLS-ROYC 250-C30G (650 hp)

Seats / Engines

10 seats · 2 engines

Last airworthiness date

20071121

ADS-B equipped

Yes — Mode-S A1E8E9

Registrant of record

NIXON ERIC J

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Factual narrative

On October 11, 2025, at 1401 Pacific daylight time, a Bell 222 helicopter, N222EX, was substantially damaged when it was involved in an accident near Huntington Beach, California. The pilot and passenger received serious injuries. One person on the ground received serious injuries and two others received minor injuries. The helicopter was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. The pilot reported that he and the passenger departed from Redlands, California, and intended to land in a Huntington Beach parking lot for a large public event. The pilot approached Huntington Beach from north, then circled for a high-speed pass above Pacific Coast Highway headed northwest. The pilot circled again and completed a slow pass above the highway, then approached the parking lot from southeast. As the helicopter descended above the parking lot, he made a small right pedal input to straighten the helicopter, then the nose veered left, and he heard a loud noise from the back left side. The pilot turned right and increased the power to fly away from the confined landing area. As the right turn rate increased, the pilot was unable to maintain control of the helicopter. Witness photos and videos revealed that during the high-speed pass, there were no apparent anomalies with the helicopter. During the slow pass, one of the tail rotor pitch links was disconnected from a tail rotor blade. As the helicopter approached the parking lot for landing, the pitch link remained disconnected (see figure 1). Figure 1. The accident helicopter before landing. A red callout shows a zoomed in view of the tail rotor assembly and a disconnected pitch link. The helicopter turned right and ascended as pieces of the tail rotor assembly began to separate. The tail rotor gearbox separated in half and the output side remained attached to the tail rotor assembly, then landed in the parking lot. The helicopter continued to spin right then impacted a staircase at the end of a pedestrian bridge. Postaccident examination of the separated tail rotor assembly revealed that both pitch horns were fractured in half. All pitch horn bolts and associated hardware remained installed and secure. The helicopter was retained for further examination. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2025_CEN26FA015.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

What the literature says.

Academic papers and agency reports matching this event's aircraft type or causal vocabulary (stall). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.

Browse the full corpus — academia portal ↗