CHI07CA192
2007-07-06 · Muncie, Indiana, United States · None · 1 aircraft · Status: Completed
Airport MIE
Current FAA registration · N7693U
- Make / Model
- CESSNA 150M
- Engine
- CONT MOTOR 0-200 SERIES (100 hp)
- Seats / Engines
- 2 seats · 1 engine
- ADS-B equipped
- Yes — Mode-S AA65CB
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The pilot's failure to maintain sufficient airspeed, resulting in a stall/mush during an attempted aborted landing. A factor in the accident was the premature flare and the pilot's inadequate recovery from a bounced landing.
Factual narrative
The airplane was substantially damaged when it impacted terrain during an aborted landing attempt on runway 32 (6,500 feet by 150 feet, grooved asphalt). The student pilot reported that prior to the accident she had completed one full stop landing with her instructor. The instructor then exited the airplane to allow the student pilot to perform three solo landings. On the first solo landing, the student pilot reported that she turned final and selected 40 degrees of flaps. She reduced engine power once she "knew that [she] had the runway made." The student pilot reported that she "flared too soon," the airplane "landed hard," and bounced back into the air. The student pilot added engine power and the airplane "ballooned up more." The student pilot decided to abort the landing, so she added full engine power and "started dumping the flaps." She stated that the airplane wouldn't climb and drifted left of the runway. The airplane descended and impacted terrain off of the side of the runway. The student pilot reported no mechanical anomalies with the airplane. The student pilot stated in her accident report that the accident could have been prevented by practicing more aborted landing procedures. The airplane was substantially damaged when it impacted terrain during an aborted landing attempt on runway 32 (6,500 feet by 150 feet, grooved asphalt). The student pilot reported that prior to the accident she had completed one full stop landing with her instructor. The instructor then exited the airplane to allow the student pilot to perform three solo landings. On the first solo landing, the student pilot reported that she turned final and selected 40 degrees of flaps. She reduced engine power once she "knew that [she] had the runway made." The student pilot reported that she "flared too soon," the airplane "landed hard," and bounced back into the air. The student pilot added engine power and the airplane "ballooned up more." The student pilot decided to abort the landing, so she added full engine power and "started dumping the flaps." She stated that the airplane wouldn't climb and drifted left of the runway. The airplane descended and impacted terrain off of the side of the runway. The student pilot reported no mechanical anomalies with the airplane. The student pilot stated in her accident report that the accident could have been prevented by practicing more aborted landing procedures. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2007_CHI07CA192.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (icing, stall). All research papers
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2022 · arXiv preprint Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- NASA NTRS 2019 · Contractor Report (CR) An Evaluation of an Analytical Simulation of an Airplane with Tailplane Icing by Comparison to Flight Data
This report presents the assessment of an analytical tool developed as part of the NASA/FAA Tailplane Icing Program. The analytical tool is a specialized simulation program called TAILSM4 which was de…
- NASA NTRS 2019 · Technical Publication (TP) NASA/FAA Tailplane Icing Program: Flight Test Report
This report presents results from research flights that explored the characteristics of an ice-contaminated tailplane using various simulated ice shapes attached to the leading edge of the horizontal …
- NASA NTRS 2019 · Other [Tail Plane Icing]
The Aviation Safety Program initiated by NASA in 1997 has put greater emphasis in safety related research activities. Ice-contaminated-tailplane stall (ICTS) has been identified by the NASA Lewis Icin…
- Embry-Riddle Scholarly Commons 2019 · Journal article (IJAAA) Airport Policing in Pakistan: Structure, Training, and Issue
Airports are strategically and economically important installations of any country. Airports are the gateway of any country and any incidents at these gateways may harm the very aspects of a country i…