CHI95LA302
1995-09-03 · OTTAWA, Kansas, United States · Fatal · 1 aircraft · Status: Completed
Airport OWI
Aircraft involved
Probable cause & findings
the pilot's delayed remedial action during the inverted spin maneuver. A factor associated with the accident was the pilot's lack of recent experience in the type operation.
Factual narrative
On September 3, 1995, at 1030 central daylight time, a Morrow Starduster I, N46565, piloted by a commercial pilot, was destroyed during a collision with the ground while in a witness reported inverted spin. Visual meteorological conditions prevailed at the time of the accident. The personal 14 CFR Part 91 flight was not operating on a flight plan. The pilot was fatally injured. The flight departed Ottawa, Kansas, exact time unknown. According to the witnesses the pilot had been practicing for an aerobatic show when the airplane entered the inverted spin. Other witnesses reported the airplane did a hammerhead stall then entered the inverted spin. They said N46565's engine decreased and increased its RPM two to four times before colliding with the ground. A member of an aerobatic association the accident pilot belonged to said the hammerhead stall was entered between 2,500 and 3,000 feet above the ground. According to this witness, the airplane's engine was at full power during the inverted spin's five of the seven turns. He said the last two turns were accomplished with reduced power. During the on-scene investigation the NTSB was represented by Federal Aviation Administration (FAA) Principal Maintenance Inspector (PMI). He interviewed one witness who spoke with the pilot by radio during the inverted spin maneuver. The witness, according to the PMI, had told the pilot to reduce N46565's power several times before it collided with the ground. The witness said the pilot had trouble doing the hammerhead stall during his practice sessions. He said the pilot did four hammerhead stalls before the one that lead to the accident. The PMI reported no airframe, control, engine anomalies that would have affected N46565's performance. He said the propeller blades were straight, one of which was buried about 4 to 6 inches in the ground. The PMI said he did not observe any skid marks made by N46565's ground collision. According to the pilot's logbook, his last flight in the Starduster I airplane (N46565) was on April 8, 1995. His logbook showed he flew this airplane 7.2 hours during April 1, 7, and 8, 1995. There were no other logbook entries for this airplane during 1995. The logbook showed the flight before the accident flight was made in a Bellanca 7ECA Citabria on August 12, 1995. The flight is shown as a 9.3 hour cross country flight. The logbook showed the pilot flew the Bellanca 7ECA 14.7 hours between February 16 and August 12, 1995. The autopsy on the pilot was conducted by the Franklin County, Kansas, Coroner's Office on September 4, 1995. The FAA Civil Aeromedical Institute's toxicological report was negative for drugs, carbon monoxide, cyanide, and volatiles. Witnesses reported that the pilot performed a hammerhead stall and entered an inverted spin. Two witnesses said the inverted spin was flat. Witnesses said the engine power increased and decreased during the first five turns of the spin. Two other witnesses said the power was at a high setting and reduced after the fifth turn. They said the airplane spun two more times before colliding with the ground. One witness said he called the pilot on a radio and told him to reduce power. He said the pilot was practicing hammerhead stalls as he was having trouble performing them. The pilot had not flown the airplane in the last four months. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1995_CHI95LA302.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (icing, stall, maintenance). All research papers
- Embry-Riddle Scholarly Commons 2023 · Faculty research project Reconfigurable Guidance and Control Systems for Emerging On-Orbit Servicing, Assembly, and Manufacturing (OSAM) Space Vehicles
Dynamic response to emergent situations is a necessity in the on-orbit servicing, assembly, and manufacturing (OSAM) field, because traditional on-orbit guidance and control (G&C) cannot respond effic…
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- Embry-Riddle Scholarly Commons 2023 · Conference paper The Value of Strong Partnerships to Build a Successful Aviation Maintenance Career Pathway Program for Transitioning Military Service Members
The aerospace industry is competing with other industries for a qualified workforce, and many of those competing industries are investing heavily in creating workforce development pipelines.
- arXiv 2022 · arXiv preprint Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- NASA NTRS 2019 · Contractor Report (CR) An Evaluation of an Analytical Simulation of an Airplane with Tailplane Icing by Comparison to Flight Data
This report presents the assessment of an analytical tool developed as part of the NASA/FAA Tailplane Icing Program. The analytical tool is a specialized simulation program called TAILSM4 which was de…
- NASA NTRS 2019 · Technical Publication (TP) NASA/FAA Tailplane Icing Program: Flight Test Report
This report presents results from research flights that explored the characteristics of an ice-contaminated tailplane using various simulated ice shapes attached to the leading edge of the horizontal …