Skip to content

Atlas / NTSB / DEN01LA025

NTSB CAROL · Event

Event DEN01LA025

2000-11-30 ENGLEWOOD, Colorado, United States Airport · APA None 1 aircraft Status: Completed

Registry · N3043T

FAA Aircraft Registry record.

Make / Model

CESSNA 320C

Year of manufacture

1964 · 36 years old at event

Engine

CONT MOTOR TSI0-470-B (260 hp)

Seats / Engines

6 seats · 2 engines

Last airworthiness date

19641130

ADS-B equipped

Yes — Mode-S A33101

Registrant of record

JWT AVIATION LLC

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

the failure of the nose landing gear to fully extend due to a bent extension rod.

Factual narrative

On November 30, 2000, at approximately 1150 mountain standard time, a Cessna 320C, N3043T, was substantially damaged during landing at Centennial Airport, Englewood, Colorado. The airline transport pilot and his passenger were not injured. The pilot was operating the airplane under Title 14 CFR Part 91. Visual meteorological conditions prevailed for the local personal flight that originated approximately 30 minutes before the accident. The pilot had not filed a flight plan. The pilot said that when he put the landing gear down for landing, the nose wheel landing gear light remained red. He flew by the tower for status confirmation. The tower controllers reported the nose wheel landing gear down, but not fully extended. The pilot landed the airplane, and let its nose settle to the runway. The airplane came to rest on the centerline of the runway. Postaccident examination (2 weeks after the event) by maintenance personnel determined that a nose gear extension rod had bent during retraction; subsequently, the nose gear failed to fully extend during landing gear extension. Two keel formers were bent during the landing. The pilot said that when he put the landing gear down for landing, the nose wheel landing gear light remained red. He flew by the tower for status confirmation. The tower controllers reported the nose wheel landing gear down, but not fully extended. The pilot landed the airplane, and let its nose settle to the runway. The airplane came to rest on the centerline of the runway. Postaccident examination by maintenance personnel determined that a nose gear extension rod had bent during retraction; subsequently, the nose gear failed to fully extend during landing gear extension. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2000_DEN01LA025.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

What the literature says.

Academic papers and agency reports matching this event's aircraft type or causal vocabulary (maintenance). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.

Browse the full corpus — academia portal ↗