ERA14LA170
2014-03-20 · Charleston, South Carolina, United States · None · 1 aircraft · Status: Completed
Airport CHS
Aircraft involved
Probable cause & findings
Inadequate maintenance, which resulted in the collapse of the right main landing gear during landing.
Factual narrative
On March 20, 2014, about 1205 eastern daylight time, a Cessna 421B, N5929M, operated by a private individual, was substantially damaged while landing at the Charleston International Airport, Charleston, South Carolina. The commercial pilot and two passengers were not injured. Visual meteorological conditions prevailed and an instrument flight rules flight plan was filed for the flight that departed the Jim Hamilton L.B. Owens Airport, Columbia, South Carolina. The personal flight was conducted under the provisions of 14 Code of Federal Regulations Part 91.According to a Federal Aviation Administration (FAA) inspector, the airplane was landing on runway 3, a 7,000-foot-long, 150-foot-wide, concrete runway. The pilot reported that he confirmed the three landing gear indicators were "in the green" while on approach, and that he performed a normal touchdown. As the airplane began the landing roll, the right main landing gear collapsed. The airplane then veered to the right and struck two runway lights, which resulted in substantial damage to the right wing rear spar. Examination of the airplane by an FAA inspector revealed that the right main landing gear down lock bellcrank was fractured and had separated from its respective trunnion. The bellcrank bolt remained installed; however, it was sheared at the bolt head consistent with overload. The trunnion forward attach point for the bellcrank was broken and not recovered. The upper end of the bellcrank remained attached to the outboard push-pull tube. The lower end of the bellcrank which attached to the rod end fitting at the lower side link was broken consistent with a ductile tension failure. Damage to the landing gear precluded the ability to functionally check or verify the landing gear system rigging. According to a representative from Cessna, the fracture location was consistent with the additional stresses that would have been placed on the bellcrank with the landing gear having not been properly rigged. Review of maintenance records revealed that the airplane had been operated for about 4 hours since its most recent annual inspection, which was performed on January 2, 2014. At that time, maintenance was performed on the airplane which included adjustment of the right main landing gear travel. The commercial pilot was concluding a personal flight with two passengers on board. The pilot reported that, during the landing roll and after a normal touchdown on the concrete runway, the right main landing gear (MLG) collapsed. The airplane then veered right and struck two runway lights, which resulted in substantial damage to the right wing rear spar. Examination of the airplane revealed that the right MLG down-lock bellcrank was fractured and had separated from its respective trunnion. The bellcrank bolt was sheared at the bolt head, consistent with overload. The upper end of the bellcrank remained attached to the outboard push-pull tube. The lower end of the bellcrank, which attached to the rod end fitting at the lower side link, was broken, consistent with a ductile tension failure. The fracture location was consistent with additional stress that would have been placed on the bellcrank if the landing gear was not properly rigged; however, damage to the landing gear precluded the ability to functionally check or verify whether the gear was properly rigged. Review of maintenance records revealed that the airplane had been operated for about 4 hours since its most recent annual inspection, which was performed about 2 months before the accident. At that time, maintenance, including the adjustment of the right MLG travel, was performed on the airplane. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12
NTSB Findings
FAA avdata. C = Cause, F = Factor.
- C Personnel issues-Task performance-Maintenance-Scheduled/routine maintenance-Maintenance personnel - C
- C Aircraft-Aircraft systems-Landing gear system-Main landing gear attach sec-Incorrect service/maintenance - C
- — Environmental issues-Physical environment-Object/animal/substance-Runway/taxi/approach light-Contributed to outcome
Verbatim from NTSB's published report. Source file
NTSB_2014_ERA14LA170.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall, maintenance). All research papers
- Embry-Riddle Scholarly Commons 2023 · Conference paper The Value of Strong Partnerships to Build a Successful Aviation Maintenance Career Pathway Program for Transitioning Military Service Members
The aerospace industry is competing with other industries for a qualified workforce, and many of those competing industries are investing heavily in creating workforce development pipelines.
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA) From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- Semantic Scholar 2026 · Article (Reliability Engineering & System Safety) Understanding human error in military aviation maintenance: The role of Performance shaping factors, cognitive workload and error orientation
- Semantic Scholar 2025 · Article (Applied Sciences) Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Semantic Scholar 2024 · Article (Defence Science Journal) Modelling of Human Factors in Aviation Maintenance Using HFACS ME Human Factors Analysis and Classification System Maintenance Extension and Bayesian Network
Aircraft maintenance is a complex task involving a skilled human workforce, spare parts, and various other resources. Human factors are an inherent element of the human workforce.