Skip to content

ERA20CA152

2020-04-17 · Ahoskie, North Carolina, United States · None · 1 aircraft · Status: Completed

Airport ASJ

Current FAA registration · N118CR

Make / Model
JOHN A HOLMGREN BEARHAWK
Year of manufacture
2013 · 7 years old at event
Engine
AMA/EXPR UNKNOWN ENG
Seats / Engines
4 seats · 1 engine
Last airworthiness date
20131101
ADS-B equipped
Yes — Mode-S A04A2D

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

The collapse of the right main landing gear during a bounced, crosswind landing.

Factual narrative

The pilot of the experimental, amateur-built tailwheel airplane was also the owner and maintained it as well. He stated that during landing, the right main landing gear collapsed. He added that there were two bolts that secure the right main landing gear and he found them both fractured after the accident. The pilot believed that one of the bolts was not properly tightened/torqued and failed first, and then the second bolt failed due to overstress. A witness, who was working on that airport at the time, reported that while driving back to the terminal, he noticed a small airplane approaching and it caught his attention as it appeared to be "wobbling" as it came in for landing. It then appeared as if the airplane "bounced" on the runway and departed the left side of the runway. The witness was unable to see the entire airplane touch down due his line of sight being partially obscured by buildings, but he noticed that one wingtip seemed to rise 15 to 20 ft during the "bounce." Examination of the wreckage revealed damage to the right wing, airframe, and tailwheel. The recorded wind at the airport, about 5 minutes before the accident, indicated an 80° left crosswind at 6 knots. The pilot stated that, during landing roll, the right main landing gear (MLG) collapsed. He added that there were two bolts that secure the right MLG and that he found them both fractured after the accident. The pilot believed that one of the bolts was not properly tightened/torqued and failed first and that the second bolt then failed due to overstress. A witness who was working at the airport at the time of the accident reported that he noticed a small airplane approaching and that it appeared to be "wobbling" as it came in for landing. Upon landing, the airplane "bounced" on the runway, turned left, and departed the runway. The witness was unable to see the entire touchdown because his line of sight was partially obscured by buildings, but he noticed that one wingtip seemed to rise 15 to 20 ft during the bounce. The airplane sustained substantial damage to the right wing, airframe, and tailwheel. A 6-knot crosswind existed at the time of the landing. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12

NTSB Findings

FAA avdata. C = Cause, F = Factor.

  • C Aircraft-Aircraft systems-Landing gear system-Main landing gear-Not specified - C
  • C Environmental issues-Conditions/weather/phenomena-Wind-Crosswind-Effect on operation - C

Verbatim from NTSB's published report. Source file NTSB_2020_ERA20CA152.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.