ERA25MA171
2025-04-10 · Jersey City, New Jersey, United States · Fatal · 1 aircraft · Status: In work
Current FAA registration · N216MH
- Make / Model
- BELL 206-L4
- Year of manufacture
- 2004 · 21 years old at event
- Engine
- ROLLS-ROYC 250 20&30 SER (420 hp)
- Seats / Engines
- 7 seats · 1 engine
- Last airworthiness date
- 20050211
- ADS-B equipped
- Yes — Mode-S A1D0E7
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Factual narrative
On April 10, 2025, about 1515 eastern daylight time, a Bell 206L-4 helicopter, N216MH, was destroyed when it was involved in an accident near Jersey City, New Jersey. The pilot and five passengers were fatally injured. The helicopter was operated as a Title 14 Code of Federal Regulations Part 91 air tour flight. Preliminary Automatic Dependent Surveillance-Broadcast (ADS-B) flight track data obtained from the Federal Aviation Administration (FAA) revealed the helicopter departed Downtown Manhattan/Wall Street Heliport (JRB), New York, New York, about 1458. The helicopter flew a teardrop pattern south of the Statue of Liberty, then proceeded north along the east side of the Hudson River adjacent to Manhattan, past the George Washington Bridge, where it performed a u-turn, then headed south along the New Jersey side of the river (figure. 1). Figure 1. ADS-B flight track overview of entire route of flight from takeoff through loss of signal near the accident location. Figure 2 depicts the plot of the helicopter’s ADS-B-observed flight path for the final 1 minute of flight, with the reported time, altitude and groundspeed superimposed. As the helicopter approached the Holland Tunnel ventilation towers near Jersey City, New Jersey, it was at a geometric altitude between 625 and 650 ft. The helicopter’s altitude increased to 675 ft msl before it entered a rapid descent. The data ended at 1514:54.5 and the helicopter’s last observed altitude was 125 ft. Figure 2. ADS-B flight track and geographic data highlighting the last minute of the flight through breakup, uncontrolled decent and loss of signal. Several witnesses described hearing several loud “bangs” emanating from the helicopter before it broke up and descended into the river. Surveillance video (with accompanying audio) captured the helicopter traveling south before it suddenly separated into three major sections: fuselage (including the engine), main rotor system (including both main rotor blades, transmission and roof-beam structure), and the tail boom (including the tail rotor) (figure 3). Figure 3. Enhanced surveillance video with sequential images depicting the helicopter’s flight and breakup. The fuselage came to rest, inverted, north of the Holland Tunnel ventilation towers where the water depth was about 6 ft. The main rotor and tail boom sections were found north of the fuselage and were submerged to a depth of about 30 ft. Debris was also recovered from the surface of the river and from a rooftop near the Hoboken, New Jersey, transit building. The helicopter was not equipped with any video or data recording devices. Photos of the pilot taken just before the helicopter departed indicated that he was wearing computer-augmented sunglasses, which had video and audio recording capability. The sunglasses were not recovered. The pilot held a commercial pilot certificate with ratings for rotorcraft-helicopter and instrument helicopter. He held a current Federal Aviation Administration (FAA) issued first-class medical certificate, and as of March 29, 2025, had logged 790.2 total hours of flight experience, of which, 48.6 hours were in the same make and model as the accident helicopter. The pilot worked a 10 days on/10 days off schedule and the accident flight was his first day back after having 10 days off. The accident flight was the eighth tour flight of the day for the accident helicopter, and all of those flights were operated by the pilot. Initial review of the helicopter’s maintenance records revealed the most recent inspection was an “event 2” of a progressive 300-hour inspection and 100-hour inspection conducted on February 27, 2025. At that time, the helicopter airframe accrued 12,975 total hours of operation, and the engine had accrued a total of 23,305 hours of operation. At the time of the accident, the helicopter had been operated about 50 hours since the inspection. Day, visual meteorological conditions prevailed at JRB at the time of the accident. The surface observation taken at 1456 included broken clouds at 7,500 ft above ground level, wind from 150° at 10 knots gusting to 18 knots with variable wind between 120° and 190°, and 10 statute miles visibility. A peak wind of 36 knots from 260° was recorded at 1423. The wreckage was recovered from the river and retained for further examination. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2025_ERA25MA171.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (maintenance). All research papers
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA) From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- Semantic Scholar 2026 · Article (Reliability Engineering & System Safety) Understanding human error in military aviation maintenance: The role of Performance shaping factors, cognitive workload and error orientation
- Semantic Scholar 2025 · Article (Applied Sciences) Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Semantic Scholar 2024 · Article (Defence Science Journal) Modelling of Human Factors in Aviation Maintenance Using HFACS ME Human Factors Analysis and Classification System Maintenance Extension and Bayesian Network
Aircraft maintenance is a complex task involving a skilled human workforce, spare parts, and various other resources. Human factors are an inherent element of the human workforce.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…