IAD05CA037
2005-02-07 · Cross Keys, New Jersey, United States · None · 1 aircraft · Status: Completed
Airport 17N
Current FAA registration · N54812
- Make / Model
- CESSNA 172P
- Engine
- LYCOMING 0-320 SERIES (180 hp)
- Seats / Engines
- 4 seats · 1 engine
- Last airworthiness date
- 19810616
- ADS-B equipped
- Yes — Mode-S A6F83A
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The pilots failure to maintain directional control. Factors contributing to the accident were the pilots lack of experience, and the snow bank.
Factual narrative
On February 7, 2005, at 1325 eastern standard time, A Cessna 172P, N54812, was substantially damaged while landing at the Cross Keys Airport (17N), Cross Keys, New Jersey. The certificated student pilot was not injured. Visual meteorological conditions prevailed and no flight plan was filed for the local instructional flight conducted under 14 CFR Part 91. According to the student pilot's flight instructor, the accident took place during the pilot's first supervised solo. The pilot was performing takeoffs and landings on runway 9. The first landing was without incident. During the second landing, the airplane departed the left side of the runway, struck a snow bank, yawed to the left, then nosed over. During a telephone interview, the pilot stated that the seat was lower in this airplane, then the airplane he had performed his previous training in, and he could not see the runway during the flare. He did not realize the airplane's proximity to the left side of the runway, since he was looking to the right at the taxiway, from which he planned to exit the runway. A post accident inspection of the airplane by a Federal Aviation Administration (FAA) inspector and the maintenance provider noted that the airplane had sustained damage to the wings, propeller, vertical stabilizer and the left wing strut. No pre-accident mechanical malfunctions were discovered and control continuity was verified. At the time of the accident the student pilot had accumulated 12.3 hours total flight time, all of which were in make and model. The reported winds at the Philadelphia International Airport (PHL), Philadelphia, Pennsylvania, located 13 nautical miles northwest, at 1254, were from 110 degrees at 3 knots. The accident took place during the pilot's first supervised solo. The pilot was performing takeoffs and landings on runway 9. The first landing was without incident. During the second landing, the airplane departed the left side of the runway, struck a snow bank, yawed to the left, then nosed over. The pilot stated that the seat was lower in this airplane, than the airplane he had performed his previous training in, and he could not see the runway during the flare. He did not realize the airplane's proximity to the left side of the runway, since he was looking to the right at the taxiway, from which he planned to exit the runway. A post accident inspection of the airplane noted that it had sustained substantial damage. No pre-accident mechanical malfunctions were discovered and control continuity was verified. At the time of the accident the student pilot had accumulated 12.3 hours of total flight time, all of which were in make and model. The reported winds 13 nautical miles northwest, at 1254, were from 110 degrees at 3 knots. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2005_IAD05CA037.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (maintenance). All research papers
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA) From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- Semantic Scholar 2026 · Article (Reliability Engineering & System Safety) Understanding human error in military aviation maintenance: The role of Performance shaping factors, cognitive workload and error orientation
- Semantic Scholar 2025 · Article (Applied Sciences) Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Semantic Scholar 2024 · Article (Defence Science Journal) Modelling of Human Factors in Aviation Maintenance Using HFACS ME Human Factors Analysis and Classification System Maintenance Extension and Bayesian Network
Aircraft maintenance is a complex task involving a skilled human workforce, spare parts, and various other resources. Human factors are an inherent element of the human workforce.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…