Skip to content

LAX04LA283

2004-07-11 · Petaluma, California, United States · None · 1 aircraft · Status: Completed

Airport O69

Current FAA registration · N4094D

Make / Model
CESSNA 182A
Year of manufacture
1957 · 47 years old at event
Engine
CONT MOTOR O-470 SERIES (230 hp)
Seats / Engines
4 seats · 1 engine
Last airworthiness date
19571227
ADS-B equipped
Yes — Mode-S A4D0F8

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

the pilot's improper flare and inadequate recovery from a bounced landing, which resulted in a collapse of the nose landing gear.

Factual narrative

On July 11, 2004, about 1135 Pacific daylight time, a Cessna 182A, N4094D, experienced a nose gear collapse while landing at the Petaluma Municipal Airport, Petaluma, California. The pilot/owner was operating the airplane under the provisions of 14 CFR Part 91. The certified flight instructor and one passenger were not injured; the airplane sustained substantial damage. The personal cross-country flight departed Napa County Airport, Napa, California, about 1100, with a planned destination of Petaluma. Visual meteorological conditions prevailed, and a flight plan had not been filed. In a written report, the pilot stated that he was attempting to land on runway 29 in light headwind conditions. After completing a normal approach, the airplane crossed over the runway threshold, and the pilot configured the airplane in a flare. The main landing gear touched down normally, and the pilot lowered the airplane's nose. As the nose landing gear touched down on the runway surface, about 200 feet down the runway from the initial touchdown point, the nose gear fork separated from the lower strut, resulting in the nose impacting the runway. The pilot further added that upon touchdown there did not appear to be any excessive G-forces or anything abnormal about the flare. The airplane incurred damage to the underside of the fuselage, the nose gear, and the propeller. In a telephone conversation with a National Transportation Safety Board investigator, the passenger, who is also a private pilot, stated that the approach was normal and properly aligned on the runway centerline. The airplane touched down on the main landing gear, and, as the certified flight instructor lowered the nose, the nose landing gear departed the airplane. The owner of the maintenance facility that inspected the airplane after the accident occurred reported to a Safety Board investigator that during the examination he found two gouges in the nose tire. The gouges were inside the treads and extended about 3 inches. He removed the tube inside the tire, and discovered pieces of the wheel had penetrated the tire, and as a result, completely destroyed the tube. He noted that while repairing the airplane he discovered damage to the firewall. The Federal Aviation Administration inspector that responded to the accident stated that an examination of the nose tire revealed a flat spot and several cuts surrounding it. He spoke to several witnesses who reported seeing the airplane bounce upon touchdown and continue to "porpoise" down the runway. The airplane's nose gear collapsed while landing. The airplane bounced upon touchdown and continued to porpoise down the runway. The nose gear fork separated from the lower strut, resulting in the nose impacting the runway. Examination of the nose tire revealed a flat spot and several cuts surrounding it. The nose wheel was broken and pieces of the wheel penetrated the tire, destroying the inner tube. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2004_LAX04LA283.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

Matched on aircraft type or causal vocabulary (maintenance). All research papers