Skip to content

Atlas / NTSB / LAX06CA150

NTSB CAROL · Event

Event LAX06CA150

2006-04-28 Honolulu, Hawaii, United States Airport · HNL None 1 aircraft Status: Completed

Registry · N790SP

FAA Aircraft Registry record.

Make / Model

CESSNA 172S

Year of manufacture

2001 · 5 years old at event

Engine

LYCOMING I0360 SER (180 hp)

Seats / Engines

4 seats · 1 engine

Last airworthiness date

20010129

ADS-B equipped

Yes — Mode-S AAB9A3

Registrant of record

MUSTANG SALLY AVIATION LLC

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

the pilot's misjudged flare resulting in a hard landing and a porpoise pilot induced oscillation.

Factual narrative

On April 28, 2006, about 1015 Hawaiian standard time, a Cessna 172S, N790SP, landed hard at Honolulu International Airport, Honolulu, Hawaii. Flight School Hawaii, Inc., was operating the airplane under the provisions of 14 CFR Part 91. The student pilot, the sole occupant, was not injured; the airplane sustained substantial damage. The local solo instructional flight departed about 0930. Visual meteorological conditions prevailed, and no flight plan had been filed. The pilot submitted a written report. He was returning from the practice area, and was initially cleared for landing on runway 4L. The tower controller then cleared him to land on runway 4R. He felt that he was too close on downwind to make the approach. He asked the controller to let him go towards the ocean, and turn around to get in a better position to land. The controller told him to turn final "now" because of outbound traffic. The student pilot said that he thought that this was an urgent request to land immediately. The student pilot said that he was too high (800 feet) and that his airspeed (95 knots) was faster than it should be. He lowered 10 degrees of flaps, selected idle power, and aimed toward the runway. He knew that he would land long, and wanted to go around. However, he didn't want to interfere with the departing traffic. He said that his airspeed was still fast, he flared too early, and the airplane landed hard. The airplane began to porpoise. He tried to prevent the propeller from striking the ground, and added power to stop from descending too quickly. He stopped the airplane beside the runway, and then taxied back onto the runway and to the ramp. The pilot stated that the airplane and engine had no mechanical failures or malfunctions during the flight. The airplane was damaged during a hard landing. The student pilot was returning from the practice area, and the controller in the air traffic control tower cleared him into class B air space for landing on runway 4L. Then the tower controller cleared him to land on runway 4R. He was too close on downwind to make the approach. He asked the controller to let him go towards the ocean. The controller told him to turn final "now" because of outbound traffic. The student pilot thought that this was an urgent request to land immediately. He felt he was too high (800 feet) and his airspeed (95 knots) was faster than it should be. He lowered 10 degrees of flaps, selected idle power, and aimed toward the runway. He knew that he would land long, and wanted to go around; however, he didn't want to interfere with the departing traffic. His airspeed was still fast, he flared too early, and the airplane landed hard. The airplane began to porpoise. He tried to prevent the propeller from striking the ground, and added power to stop from descending too quickly. He stopped the airplane beside the runway, and then taxied back onto the runway and to the ramp. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2006_LAX06CA150.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.