NTSB CAROL · Event
Event LAX06LA048
Aircraft involved
Probable cause & findings
The failure of the camshaft due to fatigue of one of the gear teeth, which resulted in a loss of engine power. Factors were the fence and the fence post.
Factual narrative
HISTORY OF FLIGHT
On November 27, 2005, at 1326 Pacific standard time, a Cessna 182A, N3936D, experienced a loss of engine power and collided with a fence while performing a forced landing on Highway 67 near Gillespie Field, San Diego, California. The private pilot/owner was operating the airplane under the provisions of 14 CFR Part 91. The pilot was not injured; the airplane sustained substantial damage. The personal cross-country flight departed Livermore, California, about 1115, with a planned destination of Gillespie Field. Visual meteorological conditions prevailed and a flight plan had not been filed. In both written and verbal statements, the pilot reported that after making contact with the control tower, he configured the airplane for landing at Gillespie Field. As the airplane approached the vicinity of the airport, the engine experienced a total loss of power. The pilot made a forced landing on Highway 67, about 2 miles from the airport. During the landing roll the airplane impacted a fence and its corresponding support pole, incurring damage to the right wing spar.
AIRCRAFT INFORMATION
The Cessna 182A, serial number 34636, was manufactured in 1957. According to the pilot, the airplane had accumulated a total time in service of 2,896 hours. A review of the logbooks revealed that the most recent annual inspection of the airframe and engine was performed on January 01, 2005, corresponding to 76 flight hours prior to the accident. The powerplant, a Teledyne Continental Motors O-470L, serial number 67624, is a six cylinder, air cooled, direct drive, horizontally opposed, normally aspirated (carburetor), internal combustion engine rated at 230 horsepower at 2,600 revolutions per minute (rpm). The maintenance records listed a total time for the engine the same as the airframe, with 2,820 hours at the last annual inspection. The engine accrued 1,145.2 hours since its last major overhaul. The pilot, who additionally held an airframe and powerplant (A&P) certificate with inspection authorization (IA), had signed the logbooks to reflect that he performed all recent maintenance on the accident airplane.
TESTS AND RESEARCH
An aviation maintenance technician with inspection authorization performed an examination of the engine at the request of a National Transportation Safety Board investigator. Upon removal of all of the spark plugs, he noted no anomalies with the coloration (light gray) or wear signatures. He reinstalled the bottom spark plugs and attempted to obtain thumb compression via rotation of the crankshaft. He noted no compression on cylinders number 1, 4, and 6; he was able to obtain strong compression from remaining cylinders 2, 3, and 5. While rotating the crankshaft, he noted that the camshaft did not appear to rotate. Removal of the starter drive gear assembly revealed that four gear teeth were missing from the camshaft sprocket and one gear tooth was missing from the crankshaft sprocket. He subsequently retrieved the missing gear teeth from the compromised oil pan with the aid of narrow cylindrical magnet. The gear teeth were sent to the Safety Board Materials Laboratory for examination. The fracture surface on the crankshaft gear tooth appeared smooth and rubbed, consistent with an overstress fracture in tension. The tooth contained a contact mark near the center of the inside bend radius. Tension cracks were located along the outside bend radius. The fracture surfaces of two of the camshaft teeth had relatively smooth features with curving arrest lines, consistent with fatigue. One tooth had fatigue features that emanated from an origin area near the aft flank and extended across approximately 95 percent of the fracture. The other tooth's fatigue features extended 70 percent of the fracture, with multiple origins. Microstructural examination and hardness testing was performed on a section of a camshaft tooth, which met drawing specifications. A thin layer of decarburization was observed on the surface. The engine experienced a loss of power and the airplane collided with a fence while the pilot was performing a forced landing. As the airplane approached the vicinity of the destination airport, the engine experienced a total loss of power. The pilot made a forced landing on highway about 2 miles from the airport. During the landing roll, the airplane impacted a fence. A post accident examination of the engine revealed that rotation of the crankshaft did not generate rotation of the camshaft. Removal of the starter drive gear assembly revealed that four gear teeth were missing from the camshaft sprocket and one gear tooth was missing from the crankshaft sprocket. The gear teeth were retrieved and sent to the Safety Board Materials Laboratory for examination. The camshaft gear sprocket failed due to fatigue initiating at the root of one of the teeth. Several other teeth had fatigue consistent with secondary initiation due to load shedding from the original failed tooth; the crankshaft gear failure was also secondary. Microstructural examination and hardness testing was performed on a section of a camshaft tooth, which met drawing specifications. A thin layer of decarburization was observed on the surface. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2005_LAX06LA048.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.
Related research
What the literature says.
Academic papers and agency reports matching this event's aircraft type or causal vocabulary (stall, maintenance). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.
- Embry-Riddle Scholarly Commons 2023 · Conference paper
The Value of Strong Partnerships to Build a Successful Aviation Maintenance Career Pathway Program for Transitioning Military Service Members
The aerospace industry is competing with other industries for a qualified workforce, and many of those competing industries are investing heavily in creating workforce development pipelines.
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA)
From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- NASA NTRS 2026 · Conference Paper
Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- Semantic Scholar 2025 · Article (Applied Sciences)
Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
Browse the full corpus — academia portal ↗