LAX06LA247
2006-07-28 · Flagstaff, Arizona, United States · Minor · 1 aircraft · Status: Completed
Airport FLG
Aircraft involved
Probable cause & findings
the pilot's inadequate preflight planning decision to take off under a low ceiling into an area of mountainous terrain that resulted in an encounter with lowering clouds and forced the pilot to land in unfavorable terrain.
Factual narrative
On July 28, 2006, about 0600 mountain standard time, a Robinson R44, N74780, collided with trees during an emergency landing near Flagstaff, Arizona. The pilot/operator was operating the helicopter under the provisions of 14 CFR Part 91. The private pilot sustained minor injuries; the helicopter sustained substantial damage. The cross-country personal flight departed Flagstaff Pulliam Airport, Flagstaff, Arizona, about 0555, with a planned destination of Phoenix Deer Valley Airport, Phoenix, Arizona. Instrument meteorological conditions prevailed, and no flight plan had been filed. The pilot submitted a written report. He departed Flagstaff Pulliam Airport on the 185-degree radial of the Flagstaff very high frequency omni-directional radio range (VOR). About 9 nautical miles south of the airport, he encountered a lowering cloud layer, and could not maintain level flight. He decided to perform an autorotation into a clearing from about 100 feet above ground level. The helicopter touched down on its skids, but the landing area was slightly inclined. The tips of the rotor blades struck the ground and then hit a tree, causing the helicopter to roll over onto its right side. The Flagstaff Pulliam Airport Automated Surface Observing System reported that the sky condition at 0556 was 800 feet overcast. The airframe and engine had about 92 hours since new. The FAA, Robinson, and Textron Lycoming were parties to the investigation. Investigators examined the wreckage at the Robinson factory under the supervision of the National Transportation Safety Board investigator-in-charge. The engine remained attached to the airframe by the engine mount. The engine had sustained mechanical damage to the exhaust system, which had been displaced upward. Visual examination of the engine revealed no evidence of preimpact catastrophic mechanical malfunction or fire. Investigators removed the bottom spark plugs. They rotated the crankshaft by hand utilizing a wrench at the cooling fan bolt. The crankshaft was free and easy to rotate in both directions. They obtained thumb compression in proper firing order on all six cylinders. They established mechanical continuity throughout the rotating/reciprocating group and accessory section. All spark plugs were clean with no mechanical deformation. The spark plug electrodes were gray, which corresponded to normal operation according to the Champion Aviation Check-A-Plug AV-27 Chart. The investigators reinstalled the spark plugs, and attached their respective leads. Robinson personnel removed the engine from the airframe, and installed it onto a test cell dynamometer. A technician started the engine with the starter using standard procedures. The oil pressure indicated within the normal operating range at the test cell control panel oil pressure gauge. The engine driven fuel pump delivered a fuel pressure indication within the normal operating range. Once the engine was at operating temperature, the technician advance the throttle to about 1,600 rpm, at which time he checked the magnetos utilizing the test cell mounted ignition switch. Both magnetos operated within manufacturer's specifications. The magneto check produced a smooth 50 to 60 rpm drop at each detent. The engine ran smoothly during the operational check, and exhibited no anomalies, and no fuel or oil leaks. According to the Robinson Helicopter Company test cell operator, the subject engine reached all prescribed performance parameters. The test cell sheet has been attached for reference. He shut the engine down, which completed the test. The helicopter collided with trees and rolled over during an emergency landing. About 9 nautical miles south of the departure airport, the pilot encountered a lowering layer of overcast clouds, and was unable to maintain level flight. He performed an autorotation into a clearing from about 100 feet above ground level. The helicopter touched down on a slight incline. The tips of the rotor blades struck the ground and a tree, causing the helicopter to roll over onto its right side. The departing airport Automated Surface Observing System reported that the sky condition at takeoff was 800 feet overcast. Mountainous terrain surrounded the airport. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2006_LAX06LA247.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…
- arXiv 2022 · arXiv preprint Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- Embry-Riddle Scholarly Commons 2021 · Journal article (JAAER) Analysis on the Negative Emotional, Physiological, and Cognitive Responses Elicited from of the Activation of a Stall Alarm
Failing to identify an aerodynamic stall can lead to the inability of an aircraft to sustain flight. To warn pilots of an impending or fully-developed stall, many aircraft have safety devices installe…