LAX07LA015
2006-10-20 · Oakdale, California, United States · None · 1 aircraft · Status: Completed
Airport O27
Aircraft involved
Probable cause & findings
a loss of engine power due to the pilot's failure to use carburetor heat during conditions that were conducive to carburetor icing.
Factual narrative
On October 20, 2006, at 1622 Pacific daylight time, an experimental Williams Bowers Fly Baby-1A, N6054Q, experienced a loss of engine power and made a forced landing in an open field near Oakdale Airport, Oakdale, California. The owner/builder/pilot operated the airplane under the provisions of 14 CFR Part 91 as a personal flight. The airplane sustained substantial structural damage during the impact, which caused the separation of a wing and the landing gear. The private pilot, the sole occupant, was not injured. Visual meteorological conditions prevailed for the local area flight that departed about 1612, and no flight plan had been filed. The National Transportation Safety Board investigator-in-charge (IIC) interviewed the pilot. The pilot stated that the airplane had just been certified as an experimental light sport category airplane earlier in the day. This was the first flight after certification. He said there were no problems with the first takeoff and landing and that the airplane "flew great." On the second takeoff, about 2,000 feet above ground level (agl), the engine lost power. The pilot pulled out the carburetor heat, to no avail, and tried to make it back to the airport. The pilot reported that he knew he was not going to make it back to the airport, and chose an open pasture to make a forced landing. He stated that the pasture was "very rough." The landing gear and one of the wings was torn off during landing. In the pilot's written statement, he said he had successfully flown the airplane earlier in the day without incident. During the accident flight, about 2,000 feet agl and 1 mile from the airport, the engine quit. He reported that it quit due to carburetor icing conditions that existed at the time. He made a 180-degree turn back to the airport. He knew that he was not going to make it back to the airport and landed in an open field. In the RECOMMENDATION section of the Pilot/Operator Accident/Incident Report (NTSB Form 6120.1), the pilot reported that he should have checked more frequently for carburetor ice during the flight. The closest official weather reporting system was Modesto City-County Airport-Harry Sham Field (MOD), Modesto, California, about 11 nm southwest of Oakdale Airport. The METAR issued at 1653 reported winds from 320 degrees at 4 knots; visibility 10 sm; temperature 82 degrees Fahrenheit; dew point 39 degrees Fahrenheit; and altimeter 29.82 inHg. According to an icing probability chart, the possibility of icing conditions was conducive to icing at cruise power. While attempting to return to the airport following a loss of engine power, the airplane contacted rough terrain during a forced landing in an open field about 3,000 feet short of the runway. A wing and the main landing gear were separated from the airplane after touchdown. Following the loss of power, the pilot activated the carburetor heat to no avail. He turned back to the airport and when he knew he wasn't going to make the runway, he made the forced landing. A plot of the temperature and dew point on a carburetor icing chart revealed that the possibility existed for icing conditions at glide and cruise power settings. The pilot stated that there were no mechanical problems with the airplane, and that he should have checked more frequently for carburetor ice during the flight. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2006_LAX07LA015.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (icing). All research papers
- arXiv 2026 · arXiv preprint Enabling Beyond-Visual-Line-of-Sight Drones Operation over Open RAN 5G Networks with Slicing
Among the foretold claims of the transition from 5G to 6G, Beyond-Visual-Line-of-Sight (BVLoS) drone operation has emerged as a prominent Internet-of-Robots enabler.
- NASA NTRS 2026 · Contractor Report (CR) Icing Physics Studies Using the 3D SIDRM Test Article: 2023 Icing Tests Analysis
In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation…
- arXiv 2025 · arXiv preprint Multi-Agent Deep Reinforcement Learning for UAV-Assisted 5G Network Slicing: A Comparative Study of MAPPO, MADDPG, and MADQN
The growing demand for robust, scalable wireless networks in the 5G-and-beyond era has led to the deployment of Unmanned Aerial Vehicles (UAVs) as mobile base stations to enhance coverage in dense urb…
- NASA NTRS 2025 · Presentation NASA Icing Update – March 2025
This NASA Icing Update was prepared for presentation to the SAE International AC-9C Inflight Icing Technology Committee. This update includes the following topics: planned Rotational Icing Scaling tes…
- Embry-Riddle Scholarly Commons 2025 · Journal article (JAAER) A Mathematical Model on the Temporal Dynamics of Aviation Competitive Pricing
This study investigates the competitive dynamics of airport pricing using U.S. airport data to validate the findings. It employs linear and nonlinear ordinary differential equation models to analyze t…
- arXiv 2024 · arXiv preprint An energy-stable phase-field model for droplet icing simulations
A phase-field model for three-phase flows is established by combining the Navier-Stokes (NS) and the energy equations, with the Allen-Cahn (AC) and Cahn-Hilliard (CH) equations and is demonstrated ana…