NTSB CAROL · Event
Event LAX99IA085
Registry · N32GA
FAA Aircraft Registry record.
Make / Model
AERO COMMANDER 690A
Year of manufacture
1974 · 25 years old at event
Engine
AIRESEARCH TPE331 SERIES (904 hp)
Seats / Engines
11 seats · 2 engines
Last airworthiness date
19940513
ADS-B equipped
Yes — Mode-S A36C8E
Registrant of record
FLYING H ENTERPRISES LLC
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The in-flight separation of a side window for undetermined reasons.
Factual narrative
HISTORY OF FLIGHT
On February 1, 1999, about 1010 hours mountain standard time, an Aerospatiale AS350B, N32GA, operated by Silverado Helicopters, Inc., d.b.a. Heli USA, experienced the sudden loss of the entire left side passenger bubble window during descent over the Grand Canyon National Park, Arizona. The window impacted and damaged a tail rotor blade (paddle). Visual meteorological conditions prevailed during the on-demand sightseeing flight that was performed under 14 CFR Part 135. The commercial pilot landed without further mishap near the south side of the Colorado River in Arizona, about 2 miles from the Grand Canyon West Airport. The airplane sustained minor damage; neither the commercial pilot nor the six passengers were injured. The aerial tour flight originated from Las Vegas, Nevada, at 0928. The pilot reported to the National Transportation Safety Board investigator that during his preflight inspection he had looked at the window and it did not appear damaged. Specifically, no abrasions, lacerations, cracks, or stop-drilled holes were observed. During the flight the passenger seated next to the window was not observed taking pictures or "elbowing" the window.
AIRCRAFT INFORMATION
The operator reported that the previous left side bubble window had been observed cracked during a 5,000-hour inspection of the helicopter. The cracked window was removed, and it was replaced with a window that had been removed from another of the operator's helicopters, N122AS, which had a total airframe time of about 5,527 hours. This work was completed on August 21, 1998. No maintenance record entry was made for the replacement window's installation in N32GA, which had about 9,154.0 hours recorded on its airframe. The operator reported it believes the replacement window that separated from the helicopter was not manufactured by Aerospatiale. The operator indicated to the Safety Board investigator that the window was obtained from Aeronautical Accessories, Inc., which holds a Supplemental Type Certificate for the "Wedge Window, 7 place" part number 350-903-001.
WRECKAGE AND IMPACT INFORMATION
The operator sent the damaged tail rotor blade to American Eurocopter for evaluation and possible repair. Following a damage assessment review by Eurocopter France, the Quality Assurance Department of American Eurocopter's USA facility reported to the Safety Board investigator that the blade was found with a debonded area located about 295 mm inboard from the tip of the blade's upper surface. In the debonded area, a 0.43 mm deep score mark was also observed in the skin of the blade. In addition, the straightness of the blade was measured, and it was found out of tolerance. Eurocopter reported that the blade was not repairable, and it should be scrapped.
TESTS AND RESEARCH
According to written and verbal information provided to the Safety Board investigator by management at Aeronautical Accessories, Inc., it manufactures a wedge window under STC Number SR00183AT, which the operator may have utilized in its helicopter. The manufacturer provides specific instructions for the installation of its windows. In pertinent part, the manufacturer indicates that the window is properly installed in the helicopter's doorframe from the inside of the door using a rubber seal (gasket) to hold it in place. It should not be installed from the outside. Application of excessive pressure on the window assembly or pulling the string too fast may cause damage to the rubber seal assembly. The manufacturer also reported that if the printed installation instructions are not followed, it is possible to install the window backwards. If installed backwards, the window can be displaced upon application of pressure. A window that has been properly installed, and is undamaged, will last indefinitely if maintained without using harmful solvents. The manufacturer additionally indicated that the window's design has not been changed since it was originally certified in November 1991. The window's overall size is larger than the opening in the door. If pressure is applied to the window, it would likely break prior to displacing the amount of material in the overlap area. The manufacturer indicated it has not received information regarding any previous in-flight separations. The helicopter operator's assistant director of operations verbally indicated to the Safety Board investigator that in the Nevada heat, cracks might develop in windows. A small crack located near the window's edge may not have been noticed/reported by the pilot due to a lack of conspicuity, or for other reasons.
ADDITIONAL INFORMATION
The operator did not report the circumstances of the mishap to the Federal Aviation Administration or to the Safety Board until several days after the helicopter had been returned to service and a replacement tail rotor blade installed. The window and its associated retention gasket (seal) remain missing. The passengers who had been onboard during the incident flight were not interviewed by the Safety Board investigator because the operator did not identify them. The Safety Board investigator requested that the pilot provide a written statement regarding the conditions and circumstances of the mishap flight. An additional request was made to the operator for completion of the accident report form. The pilot's statement and a partially completed accident report form was received on November 22, 1999. While descending on an aerial tour flight with six passengers, the left side bubble window separated from the helicopter and impacted a tail rotor blade. The pilot made a precautionary landing in the canyon without further incident. Neither the separated window nor its doorframe attachment seal (gasket) was recovered. Examination of the helicopter's tail rotor blade found it bent and scratched with areas of debonded material. The damaged blade was not repairable. During preflight inspection the pilot did not see any damage to the window, and during the flight the left seated passenger was not observed pressing on it. Due to observed cracks in the previous window 4.5 months and 589 flight hours earlier, it had been replaced with a window removed from another helicopter. No maintenance record entry was found for the window installation. The operator's replacement window was manufactured under a FAA Supplemental Type Certificate. The STC holder said that if its 'wedge' window is not properly installed, or if it becomes cracked or damaged due to exposure to harmful cleaning solvents, its integrity may be compromised. The operator reported that if a small crack existed near the window's edge, it may not have been noticed/reported by the pilot due to a lack of conspicuity. The reason(s) for the window separation could not be determined. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1999_LAX99IA085.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.
Related research
What the literature says.
Academic papers and agency reports matching this event's aircraft type or causal vocabulary (stall, maintenance). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.
- Embry-Riddle Scholarly Commons 2023 · Conference paper
The Value of Strong Partnerships to Build a Successful Aviation Maintenance Career Pathway Program for Transitioning Military Service Members
The aerospace industry is competing with other industries for a qualified workforce, and many of those competing industries are investing heavily in creating workforce development pipelines.
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA)
From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- NASA NTRS 2026 · Conference Paper
Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- Semantic Scholar 2025 · Article (Applied Sciences)
Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
Browse the full corpus — academia portal ↗