LAX99LA313
1999-09-17 · MERCED, California, United States · None · 1 aircraft · Status: Completed
Airport MER
Aircraft involved
Probable cause & findings
The pilot's premature retraction of the flaps during an attempted go-around with insufficient airspeed, which led to an inadvertent stall/mush condition.
Factual narrative
On September 17, 1999, at 1435 hours Pacific daylight time, a Cessna 172N, N2339E, descended into the ground during an attempted go-around from a landing approach to runway 31 at the Castle Airport, Merced, California. The aircraft, owned and operated by the Modesto Flight Center and rented by the pilot under the provisions of 14 CFR Part 91, sustained substantial damage. The private pilot and a passenger were not injured. Visual meteorological conditions existed for the personal flight that had originated at the Modesto, California, airport at 1400 on the day of the accident. The flight was scheduled to terminate at the Modesto Airport. Wind conditions reported from a weather observation facility located at the Modesto Airport, approximately 23 nautical miles from the accident location, were from 300 degrees at 11 knots. The airport manager reported winds at Castle airport were from the northwest, gusting to 5 knots. The pilot reported that the flight to Castle airport was uneventful. On final approach, about 30 feet above the ground, he noted a strong quartering left headwind and corrected accordingly. After straightening the nose, a gust of wind pushed the left wing up, and blew the airplane off the runway. The pilot stated that he attempted to land, and when it became evident that he would not land on the runway, he applied full throttle and pushed the carburetor heat in to go around. He reported that he felt the airplane was going to stall because of the high angle of attack on the go-around, and he "threw the flaps all the way up . . . " He stated that the airplane did not have enough lift and the airplane impacted the ground from about 50 feet. The passenger reported that on final approach the pilot had commented that the windsock was indicating a crosswind. In an interview with a Federal Aviation Administration (FAA) inspector, the pilot stated that he had received his private pilot certificate that morning and was taking his father on his first flight as a private pilot. The pilot stated that they were going to go to Castle airport to do a touch-and-go and then return to Merced. The pilot further reported that there were no mechanical malfunctions with the airplane or engine. The purpose of the flight was to do a touch-and-go at the accident airport and return to home base. No discrepancies were noted with the flight while en route to the accident airport. On final approach the pilot noted that the windsock was indicating a crosswind, and approximately 30 feet agl he felt a strong left-quartering headwind. After he corrected for the crosswind, a gust of wind pushed the left wing up and the airplane veered off of the runway. He attempted to land, and when he saw that he would not be able to land on the runway, he applied full throttle and pushed the carburetor heat in to attempt a go-around. The pilot felt the airplane about to stall and he retracted all of the flaps. He stated that there was not enough lift and the airplane impacted the ground from about 50 feet agl. No mechanical malfunctions were noted with the airplane or engine. The airport manager said that the winds at the time of the accident were from the northwest at 5 knots. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1999_LAX99LA313.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall, go-around). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- NASA NTRS 2025 · Conference Paper A Training Study to Improve Monitoring During A Go-Around
As part of an FAA program to improve go-around (GA) safety, we were asked to determine if we could improve the performance of the Pilot Monitoring (PM) during a GA maneuver.
- Flight Safety Foundation 2024 · FSF / AeroSafety World Go-Around Safety Forum Findings
Foundation Go-Around Safety Forum technical findings — examines why pilots fail to execute go-arounds when criteria are met (stabilized approach gate not met, energy state out of envelope, traffic con…
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…