MIA00LA247
2000-08-25 · FAYETTEVILLE, Tennessee, United States · None · 1 aircraft · Status: Completed
Airport FYM
Aircraft involved
Probable cause & findings
the pilot's failure to maintain adequate airspeed during the takeoff/initial climb, which resulted in an inadvertent stall/mush and collision with the runway that resulted in substantial damage to the airplane.
Factual narrative
On August 25, 2000, about 0930 central daylight time, a Cessna 182Q, N759CW, registered to and operated by a private owner as a Title 14 CFR Part 91 personal flight, settled and impacted the runway during takeoff/initial climb in Fayetteville, Tennessee. Visual meteorological conditions prevailed and no flight plan was filed. The aircraft incurred substantial damage, and the commercial-rated pilot and one passenger sustained no injuries. The flight was originating at the time of the accident. The pilot stated that after rotation, and during climbout, at an altitude of about 10 feet above the runway the airplane's engine lost power, and the airplane settled and impacted the runway. The pilot further stated that she did not have enough runway remaining so she continued the takeoff, executing a go-around, and made an otherwise uneventful landing. After the landing, she noted that the propeller, nose gear, firewall, and skin were damaged. One witness, an FAA licensed mechanic, with inspection authorization, stated that he was in the opened hangar, located about mid-length of the runway, and he observed the takeoff. The mechanic further stated that the hangar is about 300 feet to the side of the runway centerline, and he could clearly hear the aircraft's engine. He said he saw the airplane lift off about the mid-length of the runway, and ascend to an altitude of about 10 feet, prior to descending and impacting the runway with a loud popping sound. He said that after impact, the takeoff and climbout was continued, and the aircraft returned, and a landing was executed on the same runway from whence it had departed. The mechanic also stated that when the aircraft landed after the go-around he observed the passenger seated in the left seat, and the pilot seated in the right seat. The mechanic said that during the takeoff, the aircraft's engine sounded normal, as if it had been developing full power the whole time. He said there was only a slight fluctuation in sound that corresponded with the loud popping noise, as the propeller struck the runway. He said that when the popping noise occurred, about 2,000 feet of available runway remained. In addition, he stated that the fence at the end of the runway is located about 600 feet beyond the end of the runway, and there is only a slight drop off from the runway to the grass, with no collision hazards between the end of the runway and the fence. The mechanic also conducted a postaccident examination of the aircraft and stated that he checked the ignition, induction and fuel systems, and found no preexisting problems with the aircraft that would have caused the accident. The pilot stated that during climbout, after reaching about 10 feet above the ground, the airplane's engine lost power, then restarted. She further stated that the airplane had started dropping to the runway when it lost power, and it impacted the runway. One witness, an FAA licensed mechanic, with inspection authorization, stated that he heard and observed the takeoff, and the airplane lifted off about the mid-length of the runway, and had ascended to an altitude of about 10 feet, prior to descending and impacting the runway with a loud popping sound. He said that after the impact, a go-around was executed, followed by an uneventful landing. The mechanic said that engine sounded normal, as if it had been developing full power the whole time, with the only a slight fluctuation in sound that corresponded with the propeller strike. The mechanic further stated that he conducted a post accident examination of the aircraft found that it had incurred substantial damage. The mechanic further stated that he found no preexisting problems with the aircraft that would have caused the accident. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2000_MIA00LA247.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall, go-around). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- NASA NTRS 2025 · Conference Paper A Training Study to Improve Monitoring During A Go-Around
As part of an FAA program to improve go-around (GA) safety, we were asked to determine if we could improve the performance of the Pilot Monitoring (PM) during a GA maneuver.
- Flight Safety Foundation 2024 · FSF / AeroSafety World Go-Around Safety Forum Findings
Foundation Go-Around Safety Forum technical findings — examines why pilots fail to execute go-arounds when criteria are met (stabilized approach gate not met, energy state out of envelope, traffic con…
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…