Event MIA04LA099

Factual narrative

On June 20, 2004, about 1050 eastern daylight time, a North American T-28C, N28BZ, registered to and operated by a private individual, as a Title 14 CFR Part 91 personal flight, made a forced landing to a field in the area of Deland, Florida. Visual meteorological conditions prevailed, and a visual flight rules flight plan was filed. The pilot and one passenger were not injured, and the airplane incurred substantial damage. The flight had originated from New Smyrna Beach, Florida, a few minutes before the accident. The pilot stated that he had just departed from New Smyrna Beach Municipal Airport, New Smyrna Beach, Florida, and during a slow climb, at an altitude of about 5,000 feet, the pilot-rated passenger in the back seat alerted him to a flickering chip light. According to the pilot, the passenger said the light flickered dimly for about a second and then illuminated full bright. The pilot said that he then confirmed a lighted chip light on his panel as well, and shortly thereafter felt the first engine shudder/backfire. He then made a "Mayday" call, and proceeded to the nearest airport, Deland Municipal Airport, Deland, Florida, to affect a landing. Along the way, the pilot said he increased power in an attempt to ensure he would reach the airport, and initially felt the airplane accelerate, but about 30 seconds later, in addition to the illuminated chip light and vibration in the engine, suddenly there was a severe rumble again, followed by the engine operating distinctively rough. He noted little puffs of black smoke, coming out of the stacks around the fuselage, and since there was a heavy forested area ahead, turned the airplane toward a field to the east, to affect a landing. As he prepared to land, the pilot said he opened the canopy, secured the fuel flow, placed the propeller control in high pitch setting to minimize drag, secured battery power, and established a glide. He said the approach and landing flare/touchdown were uneventful, but during the landing rollout the airplane impacted a ditch, and incurred substantial damage. According to the FAA inspector who responded to the accident, an engine master rod bearing failed. The inspector further stated that there were metal fragments throughout the oil, and the degree of damage and metal fragments made it difficult to determine what may precipitated the bearing failure. The pilot stated that during a slow climb after takeoff, a lighted chip light in the airplane's cockpit illuminated. Shortly thereafter, he said he felt the first engine shudder/backfire, and he then made a "Mayday" call, and proceeded to the nearest airport to land. Along the way, the pilot said he increased power in an attempt to ensure he would reach the airport, and initially felt the airplane accelerate, but about 30 seconds later, in addition to the illuminated chip light and vibration associated with the engine, suddenly there was a severe rumble again, followed by the engine operating distinctively rough. He noted little puffs of black smoke, coming out of the stacks around the fuselage, and since there was a heavy forested area ahead, he said he turned the airplane toward a field, to affect a landing. The approach and landing flare/touchdown were uneventful, but during the landing rollout the airplane impacted a ditch, and incurred substantial damage. According to the FAA inspector who responded to the accident, an engine master rod bearing failed. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12