MIA06LA064
2006-03-16 · Sanford, Florida, United States · Minor · 1 aircraft · Status: Completed
Airport KSFB
N25566 has since been reassigned. It is now registered to a different aircraft (RON TESSIER JETEXEC, built 2019), which was not involved in this event.
Aircraft involved
Probable cause & findings
A loss of engine power during takeoff-initial climb due to contamination (debris) lodged in the carburetor jet, which resulted in a forced landing and collision with trees.
Factual narrative
On March 16, 2006, about 1325 eastern standard time, a Cessna 152, N25566, sustained substantial damage when it collided with trees following a loss of engine power, about 2 miles southeast of the Orlando Sanford International Airport, Sanford, Florida. The airplane was being operated as a visual flight rules (VFR) local area instructional flight under Title 14 CFR Part 91, when the accident occurred. The airplane was operated by the Delta Connection Academy, Sanford. The certified flight instructor and the student pilot received minor injuries. Visual meteorological conditions prevailed and no flight plan was filed. The flight instructor reported that he and his student were practicing touch and go landings to runway 9R. During the upwind portion of the landing pattern, about 200 feet agl, the engine lost power. The instructor took control of the airplane, declared an emergency, and began a right turn toward a road. He then saw a clearing and turned toward it, but the left wing collided with a tree during the landing flare. During the landing roll, the nose gear strut collapsed, and the airplane collided with a wooden greenhouse. A Federal Aviation Administration (FAA) inspector from the Orlando Flight Standards District Office (FSDO), conducted an examination of the airplane and engine on March 22, 2006. He reported that he established continuity of the engine controls. No discrepancies were noted with the engine fuel system, ignition system, or the air induction system. No contamination was found in the fuel system. He removed the carburetor and found debris in the main metering jet. The debris appeared to be small flakes of a white material. The inspector noted that the debris was larger than the fuel inlet screen. The carburetor was retained for further examination. On April 12, 2006, the carburetor was examined at a maintenance facility. No additional foreign objects or debris were found. A small leak was found at the accelerator valve. According to the operator, a previously overhauled carburetor was installed on the engine on March 13, 2006, about 9.6 hours before the accident. The airplane was released to the owner of the airplane on March 23, 2006. A flight instructor and his student were practicing touch and go landings during a CFR Part 91 instructional flight. During the upwind portion of the landing pattern, about 200 feet agl, the engine lost power. The instructor took control of the airplane, declared an emergency, and began a right turn toward a road. He then saw a clearing and turned toward it, but the left wing collided with a tree during the landing flare. During the landing roll, the nose gear strut collapsed, and the airplane collided with a wooden greenhouse. An FAA inspector examined the airplane and engine and found debris in the main metering jet. The debris appeared to be small flakes of a white material. The inspector noted that the debris was larger than the fuel inlet screen. The carburetor was removed and examined at a maintenance facility. No additional foreign object or debris was found. A small leak was found at the accelerator valve. According to the operator, a previously overhauled carburetor was installed on the engine on March 13, 2006, about 9.6 hours before the accident. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2006_MIA06LA064.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (icing, stall, maintenance). All research papers
- Embry-Riddle Scholarly Commons 2023 · Faculty research project Reconfigurable Guidance and Control Systems for Emerging On-Orbit Servicing, Assembly, and Manufacturing (OSAM) Space Vehicles
Dynamic response to emergent situations is a necessity in the on-orbit servicing, assembly, and manufacturing (OSAM) field, because traditional on-orbit guidance and control (G&C) cannot respond effic…
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- Embry-Riddle Scholarly Commons 2023 · Conference paper The Value of Strong Partnerships to Build a Successful Aviation Maintenance Career Pathway Program for Transitioning Military Service Members
The aerospace industry is competing with other industries for a qualified workforce, and many of those competing industries are investing heavily in creating workforce development pipelines.
- arXiv 2022 · arXiv preprint Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- NASA NTRS 2019 · Contractor Report (CR) An Evaluation of an Analytical Simulation of an Airplane with Tailplane Icing by Comparison to Flight Data
This report presents the assessment of an analytical tool developed as part of the NASA/FAA Tailplane Icing Program. The analytical tool is a specialized simulation program called TAILSM4 which was de…
- NASA NTRS 2019 · Technical Publication (TP) NASA/FAA Tailplane Icing Program: Flight Test Report
This report presents results from research flights that explored the characteristics of an ice-contaminated tailplane using various simulated ice shapes attached to the leading edge of the horizontal …