SEA00LA060
2000-04-01 · SILVERDALE, Washington, United States · None · 1 aircraft · Status: Completed
Airport S42
Current FAA registration · N2635K
- Make / Model
- CESSNA 180K
- Year of manufacture
- 1978 · 22 years old at event
- Engine
- CONT MOTOR O-470 SERIES (230 hp)
- Seats / Engines
- 4 seats · 1 engine
- Last airworthiness date
- 19781215
- ADS-B equipped
- Yes — Mode-S A28D33
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The pilot's inadequate compensation for winds. Factors include gusty, shifting winds, crosswinds, and an earthen berm near the edge of the runway.
Factual narrative
On April 1, 2000, approximately 1600 Pacific standard time, a Cessna 180K, N2635K, experienced a gear collapse during the landing roll at Apex Airpark, Silverdale, Washington. The private pilot and his passenger were not injured, but the aircraft, which was owned and operated by the pilot, sustained substantial damage. The 14 CFR Part 91 personal pleasure flight, which departed Roche Harbor Airport, Roche Harbor, Washington, about 45 minutes earlier, was being operated in visual meteorological conditions. No flight plan had been filed, and the ELT, which was activated by the impact, was turned off at the scene. According to the pilot, he was landing in strong, variable, gusty winds at a location where he had landed many times before. He touched down on the main gear with a headwind, and kept the tailwheel elevated while he allowed the aircraft to slow. Then, just as he began to lower the tailwheel to the runway, a strong wind gust hit the aircraft from the side and it began to track toward the left edge of the runway. The pilot applied opposite rudder and opposite brake, but he could not keep the aircraft from departing the left side of the runway. Soon after departing the runway surface, both of the main gear impacted an earthen berm and folded back underneath the belly of the aircraft. The pilot said that there was nothing wrong with the aircraft or its systems, but that it just got away from him when the crosswind gust hit the aircraft during the transition from a two-point to a three-point position. The pilot was landing the tailwheel aircraft in gusty winds that were shifting direction. He touched down on the main gear with a headwind, but as he lowered the tail to the runway surface, the aircraft was hit with a crosswind that caused it to swerve toward the side of the runway. Although the pilot attempted to realign the aircraft with the runway, it departed the left side of the runway and impacted an earthen berm. Upon contacting the berm, both main gear collapsed. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2000_SEA00LA060.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗