NTSB CAROL · Event
Event SEA02LA148
Registry · N2486C
FAA Aircraft Registry record.
Make / Model
CESSNA 180
Year of manufacture
1954 · 48 years old at event
Engine
CONT MOTOR O-470 SERIES (230 hp)
Seats / Engines
4 seats · 1 engine
Last airworthiness date
19560521
ADS-B equipped
Yes — Mode-S A250E4
Registrant of record
ARMSTRONG PATRICK TRUSTEE
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The pilot's failure to maintain directional control during the takeoff ground run. Wind gusts and a tree were a factor.
Factual narrative
On August 2, 2002, approximately 1330 mountain daylight time, a Cessna 180, N2486C, registered to and operated by the pilot as a 14 CFR Part 91 personal flight, collided with a tree during its takeoff roll at Sulphur Creek Ranch Airport, Cascade, Idaho. Visual meteorological conditions prevailed and no flight plan was filed. The aircraft was substantially damaged and the private pilot and his two passengers were not injured. During a telephone interview and subsequent written statement, the pilot reported that the takeoff began with a light tailwind on runway 28. During the takeoff roll the aircraft encountered a strong gust of wind from the right side. The pilot reported that with full power, the rudder was not effective. To keep the aircraft straight, the pilot maintained full power. The aircraft's left lift strut then collided with a small sapling growing near the edge of the runway. The wind gust subsided and the takeoff roll was ended in a clearing off the left side of the runway. The pilot reported no mechanical failures or malfunctions with the aircraft at the time of the accident. The Sulphur Creek Ranch airstrip is 3,300 feet in length and 40 feet wide, with a gravel/turf surface. The airport elevation is 5,835 feet. Operational restrictions indicate that aircraft are to land to the west and takeoff to the east. Trees are listed as obstructions. During the takeoff ground run, the aircraft encountered a strong gust of wind from the right side. To keep the aircraft straight, the pilot maintained full power. The aircraft then collided with a small sapling on the left side of the runway substantially damaging the aircraft. The aircraft's takeoff roll was ended in a clearing off the left side of the runway. The pilot reported no mechanical failures or malfunctions with the aircraft at the time of the accident. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2002_SEA02LA148.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.
Related research
What the literature says.
Academic papers and agency reports matching this event's aircraft type. Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.
- arXiv 2026 · arXiv preprint
A Miniaturized Broadband 1-Bit Coding Reconfigurable Intelligent Surface for NLOS UE Localization and Uplink Communication
In this paper, a broadband 1-bit coding metasurface-based reconfigurable intelligent surface (RIS) is presented. The unit cell of the metasurface consists of a wide dipole modified with interdigital c…
- arXiv 2024 · arXiv preprint
Distilling Tiny and Ultra-fast Deep Neural Networks for Autonomous Navigation on Nano-UAVs
Nano-sized unmanned aerial vehicles (UAVs) are ideal candidates for flying Internet-of-Things smart sensors to collect information in narrow spaces.
- arXiv 2024 · arXiv preprint
A flexured-gimbal 3-axis force-torque sensor reveals minimal cross-axis coupling in an insect-sized flapping-wing robot
The mechanical complexity of flapping wings, their unsteady aerodynamic flow, and challenge of making measurements at the scale of a sub-gram flapping-wing flying insect robot (FIR) make its behavior …
- Embry-Riddle Scholarly Commons 2024 · Conference paper
Integrated Propulsion and Control of Rotorcraft
RESEARCH OBJECTIVE OVERVIEW The Eagle Flight Research Center (EFRC) at Embry-Riddle Aeronautical University (ERAU) is investigating the handling qualities of failure modes of multi-rotors employing di…
- NASA NTRS 2023 · Presentation
Subsonic Single Aft Engine (SUSAN) Flight Deck Experiment: Throttle and Engine Display Concepts
NASA is developing a new hybrid-electric aircraft concept called the SUbsonic Single Aft eNgine (SUSAN) Electrofan. The SUSAN airplane is being designed as a 180-passenger commercial regional jet and …
- Embry-Riddle Scholarly Commons 2023 · Conference paper
The Value of Strong Partnerships to Build a Successful Aviation Maintenance Career Pathway Program for Transitioning Military Service Members
The aerospace industry is competing with other industries for a qualified workforce, and many of those competing industries are investing heavily in creating workforce development pipelines.
Browse the full corpus — academia portal ↗