Skip to content

SEA07CA192

2007-06-30 · Palm Springs, California, United States · None · 1 aircraft · Status: Completed

Airport PSP

Current FAA registration · N475CC

Make / Model
CUB CRAFTERS INC CC11-100
Year of manufacture
2007 · 0 years old at event
Engine
CONT MOTOR O-200A (100 hp)
Seats / Engines
2 seats · 1 engine
Last airworthiness date
20080408
ADS-B equipped
Yes — Mode-S A5D3E2

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

The pilot's failure to maintain directional control during landing which resulted in an inadvertent ground loop.

Factual narrative

The pilot was landing the tailwheel-equipped airplane on runway 31R. During the landing, the airplane veered from the runway and groundlooped, resulting in substantial damage to the right wing. The pilot reported about 3,000 hours total time, with 30 hours in the airplane make and model. He stated that no mechanical malfunctions occurred to result in the loss of directional control. The pilot was landing the tailwheel-equipped airplane on runway 31R. During the landing, the airplane veered from the runway and groundlooped, resulting in substantial damage to the right wing. The pilot reported about 3,000 hours total time, with 30 hours in the airplane make and model. He stated that no mechanical malfunctions occurred to result in the loss of directional control. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2007_SEA07CA192.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Search this event elsewhere

External sources are reported, not agency: signal that something happened, not fact about what happened.