SEA98LA061
1998-04-09 · REDMOND, Oregon, United States · None · 1 aircraft · Status: Completed
Airport RDM
Current FAA registration · N2933C
- Make / Model
- CESSNA 180
- Seats / Engines
- 4 seats · 1 engine
- ADS-B equipped
- Yes — Mode-S A30363
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The passenger-pilot's excessive rate of descent during touchdown. Factors include the pilot-in-command's inadequate recovery from a hard/bounced landing, the passenger-pilot's failure to execute a go-around after taking control of the aircraft, and gusty crosswinds.
Factual narrative
On April 9, 1998, approximately 1115 Pacific daylight time, a Cessna 180, N2933C, experienced a main landing gear failure during a hard landing at Roberts Field, Redmond, Oregon. The private pilot and his passenger were not injured, but the aircraft , which was owned by the pilot and the passenger, sustained substantial damage. The local 14 CFR Part 91 flight, which had been in the air for about 15 minutes, was being operated in visual meteorological conditions. No flight plan had been filed, and there was no report of an ELT activation. According to the pilot, who had accumulated approximately 97 hours of total flying time, with 35 hours in conventional gear aircraft, he had decided to make a full-stop landing because the winds had become too strong, variable and gusty to continue practicing landings. He said that as he tried to land in the gusty conditions, the aircraft hit hard and bounced back into the air and then drifted near the lateral boundary of the runway. At that point there was a voluntary transfer of control of the aircraft to the passenger, who holds an FAA private pilot certificate, and who had accumulated approximately 215 hours of total flying time and 180 hours in conventional gear aircraft. Instead of executing a go-around, the passenger-pilot continued about 1,000 feet further down the runway and attempted to land the aircraft. According to the pilot who originally initiated the landing attempt, during the passenger-pilot's attempted touchdown, the aircraft contacted the runway very hard, and soon thereafter one of the main gear legs folded back under the fuselage. Because the pilot reported that the aircraft had experienced a very hard landing about 40 flight hours prior to this accident, an FAA airworthiness inspector examined the area around the gear leg attach saddle, but no evidence of previous damage was found. Because the wind conditions had become too challenging to continue practice landings, the pilot, who had accumulated about 35 hours in conventional gear aircraft, decided to make a full-stop landing. During the landing attempt, the aircraft hit hard, bounced back into the air, and began to drift past the lateral boundary of the runway. At that point there was a voluntary transfer of control of the aircraft to the private pilot-rated passenger, who was co-owner of the airplane. The passenger-pilot, who had approximately 180 hours of conventional gear time, elected not to execute a go-around, but instead continued down the runway and attempted a full stop landing. During that landing attempt, the aircraft hit the runway surface hard enough to damage the gear leg attach saddle, and soon after touchdown, the right gear leg folded back underneath the aircraft. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1998_SEA98LA061.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (icing, go-around). All research papers
- AOPA Air Safety Institute 2020 · Safety advisor Safety Advisor: Aircraft Icing
Safety advisor on in-flight airframe icing in piston GA aircraft. Covers icing physics, identification of structural vs induction vs carb ice, escape strategies (climb / descend / 180), use of weather…
- arXiv 2026 · arXiv preprint Enabling Beyond-Visual-Line-of-Sight Drones Operation over Open RAN 5G Networks with Slicing
Among the foretold claims of the transition from 5G to 6G, Beyond-Visual-Line-of-Sight (BVLoS) drone operation has emerged as a prominent Internet-of-Robots enabler.
- NASA NTRS 2026 · Contractor Report (CR) Icing Physics Studies Using the 3D SIDRM Test Article: 2023 Icing Tests Analysis
In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation…
- arXiv 2025 · arXiv preprint Multi-Agent Deep Reinforcement Learning for UAV-Assisted 5G Network Slicing: A Comparative Study of MAPPO, MADDPG, and MADQN
The growing demand for robust, scalable wireless networks in the 5G-and-beyond era has led to the deployment of Unmanned Aerial Vehicles (UAVs) as mobile base stations to enhance coverage in dense urb…
- NASA NTRS 2025 · Conference Paper A Training Study to Improve Monitoring During A Go-Around
As part of an FAA program to improve go-around (GA) safety, we were asked to determine if we could improve the performance of the Pilot Monitoring (PM) during a GA maneuver.
- NASA NTRS 2025 · Presentation NASA Icing Update – March 2025
This NASA Icing Update was prepared for presentation to the SAE International AC-9C Inflight Icing Technology Committee. This update includes the following topics: planned Rotational Icing Scaling tes…