Skip to content

Atlas / NTSB / WPR11CA189

NTSB CAROL · Event

Event WPR11CA189

2011-04-06 Salt Lake City, Utah, United States Airport · U42 Minor 1 aircraft Status: Completed

Aircraft involved

Probable cause & findings

The student pilot's inadvertent action of pulling out the engine's mixture control lever to idle cutoff that resulted in a complete loss of engine power.

Factual narrative

The certified flight instructor said he and his student were flying the helicopter in the traffic pattern on the downwind leg. The student pilot was flying and he was told by the instructor to reduce the power to begin the descent for the base turn to final. The student reduced the power by approximately 1 inch of manifold pressure. The instructor then took control of the helicopter and reduced the power by an additional 6 or 7 inches of manifold pressure. He said that the student pulled the mixture control out to the idle cutoff position, which resulted in a loss of engine power. The student had intended to apply carburetor heat and instead inadvertently moved the mixture control, which was located next to the carburetor heat. The instructor turned the helicopter 180 degrees into the wind and simultaneously entered an autorotation from 300 feet above the ground. His selected landing site turned out to be a school yard with children present. He maneuvered the helicopter to a new landing site, but subsequently landed hard. The landing skids were spread and the main rotor cut off the tail boom. The certified flight instructor said he and his student were flying the helicopter in the traffic pattern on the downwind leg. The student pilot was flying and the instructor told him to reduce the power to begin the descent for the base turn to final. The student reduced the power by approximately 1 inch of manifold pressure. The instructor then took control of the helicopter and reduced the power by an additional 6 or 7 inches of manifold pressure. He said that the student pulled the mixture control out to the idle cutoff position, which resulted in a loss of engine power. The student had intended to apply carburetor heat and instead inadvertently moved the mixture control, which was located next to the carburetor heat. The instructor turned the helicopter 180 degrees into the wind and simultaneously entered an autorotation from 300 feet above the ground. His selected landing site turned out to be a school yard with children present. He maneuvered the helicopter to a new landing site, but subsequently landed hard. The landing skids were spread and the main rotor cut off the tail boom. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12

NTSB Findings

Hierarchical cause / factor breakdown from the FAA bulk avdata database. Each finding tagged C (Cause) or F (Factor).

  • C Personnel issues-Action/decision-Action-Incorrect action performance-Student pilot - C
  • Environmental issues-Physical environment-(general)-(general)-Contributed to outcome
  • C Aircraft-Aircraft power plant-Engine controls-Mixture control-Unintentional use/operation - C

Verbatim from NTSB's published report. Source file NTSB_2011_WPR11CA189.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.