STC SA00823SE

Fabrication and Installation of Rainbow Flying Service front and rear wing spars and modified wing ribs in accordance with the data called out in AML No. SA00823SE. This modification must be maintained in accordance with instructions for continued airworthiness specified on the continuation sheet to this STC. NOTE: Resorcinol-formaldehyde resin adhesive must be used for all wood-to-wood bonds in this modification.

Historical Amended Aircraft Single-Engine Rev 05/18/2001 View PDF on drs.faa.gov ↗

What is an STC?

A Supplemental Type Certificate authorizes a major modification or alteration to an FAA-certificated aircraft. STCs are how operators legally install new avionics, change fuel systems, add floats, swap engines, etc. — every change beyond a minor modification needs one.

Applicable aircraft (23)

Certification basis — 14 CFR

Specific sections

Sec. 111
Sec. 113
Sec. 115
Sec. 117
Sec. 119
Sec. 120
§ 21.47

The STC PDF on drs.faa.gov is the authoritative document — it lists installation instructions, ICA requirements, and any limitations. Open PDF ↗