AD 2025-05295
Published 2025-03-28 · 3 models · 205 US-registered tails affected · Federal Register
Airworthiness Directives; The Boeing Company Airplanes Federal Register ↗
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by possible horizontal stabilizer pivot pin lockring, outer pivot pin, and outboard spacer misalignment at final assembly. This AD requires inspection of the left-side and right-side horizontal stabilizer pivot pin assemblies for misalignment and incorrect gapping, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Applicability · by US fleet size
- BOEING 787-9 TCDS T00021SE 110 tails
- BOEING 787-8 TCDS T00021SE 74 tails
- BOEING 787-10 TCDS T00021SE 21 tails
Federal Register text
Verbatim; the Federal Register publication is the legally binding document. Cite: 90 FR 14026. View on Federal Register ↗
[Federal Register Volume 90, Number 59 (Friday, March 28, 2025)] [Rules and Regulations] [Pages 14026-14029] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-05295]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2024-2410; Project Identifier AD-2024-00509-T; Amendment 39-22998; AD 2025-06-10] RIN 2120-AA64
Airworthiness Directives; The Boeing Company Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by possible horizontal stabilizer pivot pin lockring, outer pivot pin, and outboard spacer misalignment at final assembly. This AD requires inspection of the left-side and right-side horizontal stabilizer pivot pin assemblies for misalignment and incorrect gapping, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
DATES: This AD is effective May 2, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of May 2, 2025.