FAA · Airworthiness Directive
Airworthiness Directives; The Boeing Company Airplanes
Abstract
The FAA proposes to supersede Airworthiness Directive (AD) 2024-01-01, which applies to certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. AD 2024-01-01 requires repetitive general visual inspections (GVIs) of the area under all lavatory washbasins for evidence of intermittent and active leaks at the faucet control module (FCM) and applicable on-condition actions. The FAA has determined that the affected FCMs must be replaced with an improved design FCM to address the unsafe condition. This proposed AD would continue to require the actions of AD 2024-01-01 and would require replacing the FCM as terminating action for the repetitive GVIs, performing a leak test, installing moisture management devices, and performing applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Applicability
Aircraft makes and models this AD applies to, sorted by US-registered fleet size.
Federal Register text
Verbatim from the Federal Register publication — required actions, compliance times, parts/serial numbers, and methods of compliance. The Federal Register is the legally binding document; this rendering is for readability. Cite: 90 FR 25166.
[Federal Register Volume 90, Number 114 (Monday, June 16, 2025)] [Proposed Rules] [Pages 25166-25169] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-11050]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2025-1103; Project Identifier AD-2024-00141-T] RIN 2120-AA64
Airworthiness Directives; The Boeing Company Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 2024-01-01, which applies to certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. AD 2024-01-01 requires repetitive general visual inspections (GVIs) of the area under all lavatory washbasins for evidence of intermittent and active leaks at the faucet control module (FCM) and applicable on-condition actions. The FAA has determined that the affected FCMs must be replaced with an improved design FCM to address the unsafe condition. This proposed AD would continue to require the actions of AD 2024-01-01 and would require replacing the FCM as terminating action for the repetitive GVIs, performing a leak test, installing moisture management devices, and performing applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this proposed AD by July 31, 2025.
ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-1103; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For the Boeing material identified in this proposed AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; website myboeingfleet.com. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2025-1103.
FOR FURTHER INFORMATION CONTACT: Courtney Tuck, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206- 231-3986; email: [email protected].