Skip to content

AD 2025-11964

Published 2025-06-27 · 2 models · 40 US-registered tails affected · Federal Register

Airworthiness Directives; Airbus SAS Airplanes Federal Register ↗

Abstract

The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by reports of electronic centralized aircraft monitor (ECAM) messages requiring flight control remote module (FCRM) replacement linked to solder structural fatigue. This proposed AD would require replacement of affected parts before exceeding the life limit and would limit the installation of affected parts under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.

Applicability · by US fleet size

Federal Register text

Verbatim; the Federal Register publication is the legally binding document. Cite: 90 FR 27485. View on Federal Register ↗

[Federal Register Volume 90, Number 122 (Friday, June 27, 2025)] [Proposed Rules] [Pages 27485-27487] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-11964]

======================================================================== Proposed Rules Federal Register ________________________________________________________________________ This section of the FEDERAL REGISTER contains notices to the public of the proposed issuance of rules and regulations. The purpose of these notices is to give interested persons an opportunity to participate in the rule making prior to the adoption of the final rules. ========================================================================

Federal Register / Vol. 90, No. 122 / Friday, June 27, 2025 / Proposed Rules

[[Page 27485]]

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2025-1120; Project Identifier MCAI-2025-00019-T] RIN 2120-AA64

Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by reports of electronic centralized aircraft monitor (ECAM) messages requiring flight control remote module (FCRM) replacement linked to solder structural fatigue. This proposed AD would require replacement of affected parts before exceeding the life limit and would limit the installation of affected parts under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.

DATES: The FAA must receive comments on this proposed AD by August 11, 2025.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-1120; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For European Union Aviation Safety Agency (EASA) material identified in this proposed AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email [email protected]. You may find this material on the EASA website at ad.easa.europa.eu. It is also available at regulations.gov under Docket No. FAA-2025-1120. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

FOR FURTHER INFORMATION CONTACT: Kin Suen Chan, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone: 847-294-7496; email: [email protected].