FAA · Airworthiness Directive
Airworthiness Directives; The Boeing Company Airplanes
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-9 and 787-10 airplanes. This AD was prompted by reports of multiple supplier notices of escapement (NOEs) indicating that ram air turbine (RAT) forward fittings were possibly manufactured with an incorrect titanium alloy material. This AD requires a high frequency eddy current (HFEC) or handheld X-ray fluorescence (XRF) spectrometer inspection of the RAT forward fitting to determine the titanium alloy material and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Applicability
Aircraft makes and models this AD applies to, sorted by US-registered fleet size.
Federal Register text
Verbatim from the Federal Register publication — required actions, compliance times, parts/serial numbers, and methods of compliance. The Federal Register is the legally binding document; this rendering is for readability. Cite: 91 FR 2078.
[Federal Register Volume 91, Number 11 (Friday, January 16, 2026)] [Rules and Regulations] [Pages 2078-2080] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2026-00837]
[[Page 2078]]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2025-1361; Project Identifier AD-2025-00217-T; Amendment 39-23232; AD 2026-01-04] RIN 2120-AA64
Airworthiness Directives; The Boeing Company Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-9 and 787-10 airplanes. This AD was prompted by reports of multiple supplier notices of escapement (NOEs) indicating that ram air turbine (RAT) forward fittings were possibly manufactured with an incorrect titanium alloy material. This AD requires a high frequency eddy current (HFEC) or handheld X-ray fluorescence (XRF) spectrometer inspection of the RAT forward fitting to determine the titanium alloy material and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
DATES: This AD is effective February 20, 2026. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of February 20, 2026.