ANC20LA020
2020-02-04 · Hooper Bay, Alaska, United States · None · 1 aircraft · Status: Completed
Airport HPB
Current FAA registration · N454SF
- Make / Model
- CESSNA 208B
- Year of manufacture
- 1999 · 21 years old at event
- Engine
- P&W PT6A SER (750 hp)
- Seats / Engines
- 12 seats · 1 engine
- Last airworthiness date
- 19991217
- ADS-B equipped
- Yes — Mode-S A5828E
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The pilot’s decision to depart from a contaminated runway, and his failure to make a timely decision to abort the takeoff when the airplane was not accelerating as expected. Contributing to the accident was the pilot’s decision to depart in limited visibility conditions, which likely affected his ability to determine the available runway distance remaining during the takeoff.
Factual narrative
On February 4, 2020, about 1550 Alaska standard time, a Cessna 208B airplane, N454SF, sustained substantial damage when it was involved in an accident near Hooper Bay, Alaska. The pilot and seven passengers were not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 135 scheduled passenger flight. According to the pilot, the departure was delayed about 3 hours due to the weather conditions on the day of the accident, which included snow, low visibility, and flat light. Before departing, the pilot received runway reports from the company dispatch that all destination airport runways were suitable. After performing a risk analysis and gathering more weather information, the pilot departed on the flight. While en route to the first airport, he chose to cancel the second leg of the flight due to deteriorating weather conditions, and he informed company dispatch that he would return with all of the passengers to the departure airport. After landing and loading the passengers and baggage, the pilot taxied the airplane for departure. He stated that flat light conditions prevailed and that it was difficult to see down the runway or have any depth perception. He initiated the takeoff with 20° of flaps selected and noticed no issues during the initial takeoff roll. He then noticed that the airspeed was not increasing fast enough but decided that there was inadequate runway remaining on which to abort the takeoff. The airplane became airborne, and the stall warning horn activated as the airplane cleared the departure end of the runway. The pilot attempted to maneuver the airplane in ground effect, but the airplane settled, and the main landing gear impacted the snow-covered terrain. The nose wheel impacted the snow, and the airplane came to rest upright about 150 ft from the end of the runway. The engine mount sustained substantial damage. The pilot reported no preimpact mechanical malfunctions or failures that would have precluded normal operation. The pilot added that there was about 3 to 5 inches of wet, heavy snow on the runway at the time of departure. The Chart Supplement Alaska discussed the airport information for HPB effective January 30, 2020, and stated under airport remarks: - Unattended. Runway condition not monitored; recommend visual inspection prior to using. While taking off from a snow-covered runway in instrument meteorological conditions, the pilot stated that the airplane was not gaining speed as expected, but that there was inadequate runway remaining on which to abort the takeoff. The airplane became airborne, and the stall warning horn activated; the airplane subsequently settled back onto the ground, the nose landing gear impacted terrain, and the airplane came to rest upright off the departure end of the runway, resulting in substantial damage. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12
NTSB Findings
FAA avdata. C = Cause, F = Factor.
- — Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot
- — Environmental issues-Conditions/weather/phenomena-Ceiling/visibility/precip-Low visibility-Effect on personnel
- — Environmental issues-Physical environment-Runway/land/takeoff/taxi surface-Snow/slush/ice covered surface-Effect on operation
- — Environmental issues-Conditions/weather/phenomena-Ceiling/visibility/precip-Snow-Effect on operation
- — Environmental issues-Conditions/weather/phenomena-Light condition-Flat light-Effect on personnel
Verbatim from NTSB's published report. Source file
NTSB_2020_ANC20LA020.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…
- arXiv 2022 · arXiv preprint Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- Embry-Riddle Scholarly Commons 2021 · Journal article (JAAER) Analysis on the Negative Emotional, Physiological, and Cognitive Responses Elicited from of the Activation of a Stall Alarm
Failing to identify an aerodynamic stall can lead to the inability of an aircraft to sustain flight. To warn pilots of an impending or fully-developed stall, many aircraft have safety devices installe…